Civil and Environmental Engineering Commons^™

Adaptivity For Meshfree Point Collocation Methods In Linear Elastic Solid Mechanics, Joshua Wayne Derrick

Theses and Dissertations

This study presents the behavior of local node adaptivity for point collocation meshfree numerical methods and its application to linear elastic solid mechanics. A bisection approach to meshfree adaptivity will be presented with numerical examples showing that convergence is achieved. A threshold value is required from the user and this value is an acceptable change in gradient for the problem. If the change in gradient between 2 nodes exceed this limit, a node is added at the mid-point between the two nodes. This process applies to all nodes in the model. Once the refinement is complete, the model is processed …

Experimental Study Of Longitudinal Sorting Of Particles Differing In Size And Density, Nabila Mahjabeen

Theses and Dissertations

Transport, deposition and erosion of sediment particles differing in size, shape and density may result in particle segregation, which in geosciences applications is generally referred to as sediment sorting. A thorough understanding of sediment sorting processes is important to describe and model a wide variety of natural processes such as the decrease in particle size and/or density in a fluvial system (downstream fining and/or lightening), the formation of economic placers, concentration of heavy minerals, chemical and metal pollutants etc. Sorting of sediment grains associated with sediment transport in the streamwise direction results in the development of longitudinal sorting patterns. Vertical …

Interfacial Bond Between Reinforcing Fibers And Calcium Sulfoaluminate Cements: Fiber Pullout Characteristics, Robert B. Jewell, Kamyar C. Mahboub, Thomas L. Robl, Arne C. Bathke

Civil Engineering Faculty Publications

The results of an experimental investigation on the influence of the interfacial bond of reinforcing fibers embedded in a calcium sulfoaluminate matrix on the fiber-pullout peak load and energy consumption are presented. Bonding at the fiber-matrix interface plays an important role in controlling the mechanical performance of cementitious composites—in particular, composites formed from sulfate-based systems (calcium sulfoaluminate [CSA] cements), as opposed to the silicate systems found in portland cement. Various types of fibers were selected, including polyvinyl alcohol (PVA), polypropylene, and copper-coated steel. The fibers were embedded in three different matrixes: two sulfate-based cements including one commercially available CSA cement …

Simulating Energy Efficient Control Of Multiple-Compressor Compressed Air Systems, Sean Murphy, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

In many industrial facilities it is common for more than one air compressor to be operating simultaneously to meet the compressed air demand. The individual compressor set-points and how these compressors interact and respond to the facility demand have a significant impact on the compressed air system total power consumption and efficiency. In the past, compressors were staged by cascading the pressure band of each compressor in the system. Modern automatic sequencers now allow more intelligent and efficient staging of air compressors.

AirSim, a compressed air simulation tool, is now able to simulate multiple-compressor systems with pressure band and automatic …

Numerical Simulation Of Prestressed Precast Concrete Bridge Deck Panels Using Damage Plasticity Model, Wei Ren, Lesley Sneed, Yang Yang, Ruili He

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Determining Rockfall Volumes In Three Sites Along Habs Mountain Road In Southwestern Saudi Arabia, Using Lidar Technology, Abdullah Ayed Al-Otaibi

Masters Theses

"The rugged elevated topography is a characteristic feature of the western and southwestern regions of Saudi Arabia. Few arterial roads connect the scattered villages of these regions to major cities, such as Habs Road in Jazan region. Rock fall poses a serious hazard to people, property and animals along the rock cuts of this road. Although no traditional Rockfall studies have previously been applied to this road, accessibility and rock formation shape and structure variability influenced the choice of using Terrestrial Light Detection And Ranging (LiDAR) technology to calculate the volume of rockfall at selected sites along this road.

Software …

Behavior Of Crimped Cold-Formed Steel C-Section Beams, Jeffrey Devon Smith

Masters Theses

"This work covers the behavior of crimped cold-formed steel C-section beams under flexural loading. The specific beam shape that was tested was 600S162-54. The crimps were placed in the flange and web of the beam to curve the beam. Three crimp sizes were tested: 0.5 degree, 1.5 degree, and 3.0 degree. In construction practice, the company placed a reinforcing steel band that overlapped the crimped areas to restore strength. These various crimp degrees were tested to evaluate how much strength, if any, was lost. The reinforcing steel band was tested simultaneously with the beam to evaluate if its presence significantly …

An Investigation Of Shear-Friction Of Lightweight Aggregate Concretes, Kristian Krc

Masters Theses

"This thesis reports the results of research initiated to evaluate the influence of lightweight aggregate type and casting procedure on shear transfer across an interface of concretes cast at different times. The topic of shear transfer has been evaluated and revisited in recent PCI Design Handbooks. In this test program, a series of cold joint as well as monolithic specimens are evaluated. The peak shear strength and post peak behavior are examined. The experimental matrix included 28 push-off specimens that were either cast monolithically or cast at different times creating the condition referred to as a cold joint. The variables …

Shear-Friction Of Sand-Lightweight Clay And Slate Aggregate Concretes With Varied Reinforcement Ratios, Samantha Lynn Wermager

Masters Theses

"This thesis focuses on the structural properties of sand-lightweight aggregate concrete in terms of shear transfer strength at cold-joint interfaces. This type of interface is common for precast concrete connections which are typically designed using the shear-friction concept. This testing program was meant to expand the shear-friction database and evaluate the appropriateness of current shear-friction design provisions with respect to sand-lightweight concrete. This study builds on the work done by Shaw (2013) who studied lightweight expanded shale aggregate concrete. The current study included thirty-two push-off specimens constructed from sand-lightweight concrete with a target compressive strength of 5,000 psi. Either expanded …

Determination Of Setting Times By Shear Wave Velocity Evolution In Fresh Mortar Using Bender Element Method, Jianfeng Zhu

Masters Theses

This study aims at using modified bender element (BE) method to monitor the shear wave velocity (V_s) of mortar at early-age and determine initial and final setting times with the V_s method. Modifications of the traditional BE method have been made to overcome the aggressive cementitious environment and eliminate electromagnetic coupling. BE has been successfully employed in mortar samples with and without admixtures to evaluate the evolution of V_s during the early age (first 24 hrs) of hydration. An energy approach method of determining the first arrival time of S-wave has been proposed. Pulse wave velocity …

Sustainable Design Of Buildings Using Semantic Bim And Semantic Web Services, Mehrdad Niknam, Saeed Karshenas

Civil and Environmental Engineering Faculty Research and Publications

In response to the growing concerns about climate change and the environment, sustainable design of buildings is increasingly demanded by building owners and users. However, fast evaluation of various design options and identification of the optimized design requires application of design analysis tools such as energy modeling, daylight simulations, and natural ventilation analysis software. Energy analysis requires access to distributed sources of information such as building element material properties provided by designers, mechanical equipment information provided by equipment manufacturers, weather data provided by weather reporting agencies, and energy cost data from energy providers. Gathering energy related information from different sources …

The Impact Of Capsid Proteins On Virus Removal And Inactivation During Water Treatment Processes, Brooke K. Mayer, Yu Yang, Daniel Gerrity, Morteza A. Abbaszadegan

Civil and Environmental Engineering Faculty Research and Publications

This study examined the effect of the amino acid composition of protein capsids on virus inactivation using ultraviolet (UV) irradiation and titanium dioxide photocatalysis, and physical removal via enhanced coagulation using ferric chloride. Although genomic damage is likely more extensive than protein damage for viruses treated using UV, proteins are still substantially degraded. All amino acids demonstrated significant correlations with UV susceptibility. The hydroxyl radicals produced during photocatalysis are considered nonspecific, but they likely cause greater overall damage to virus capsid proteins relative to the genome. Oxidizing chemicals, including hydroxyl radicals, preferentially degrade amino acids over nucleotides, and the amino …

The Role Of Shrinkage Strains Causing Early-Age Cracking In Cast-In-Place Concrete Bridge Decks, Tayyebeh Mohammadi, Baolin Wan, Christopher M. Foley

Civil and Environmental Engineering Faculty Research and Publications

Early-age cracking in cast-in-place reinforced concrete bridge decks is occurring more frequently now than three decades ago and principle factors that lead to early-age deck cracking are not fully understood. A finite element (FE) simulation methodology for assessing the role of shrinkage-induced strains in generating early-age bridge deck cracking is described. The simulations conducted indicate that drying shrinkage appears to be capable of causing transverse (and possibly longitudinal) bridge deck cracks as early as 9 to II days after bridge deck placement. The drying-shrinkage induced stresses would result in transverse cracking over interior pier supports in a typical bridge superstructure …

Introductory Editorial: Water Microbiology, Patrick J. Mcnamara, Mark J. Krzmarzick

Civil and Environmental Engineering Faculty Research and Publications

No abstract provided.

Pervious Vs. Impervious Pavement: An Engineering Approach To Cost Efficiency, William Vanlandeghem

Honors Theses

This research attempts to make a comprehensive comparison between the relatively new breed of pavement, pervious concrete, and asphalt, a more popular and accepted pavement type. Pervious concrete is mainly used as a pavement surface for green purposes; however, this thesis delves into the possibility that pervious concrete may be able to offer benefits that allow the green alternative to be cost efficient as well. The comparison will be made over the entirety of the surface life including each pavement design and the materials used, the surface drainage, and the maintenance of each. The pavements were analyzed from a real …

Lateral Torsional Buckling Response In Glass Fiber Reinforced Polymer Composite Beams And Comparison With Ansys Modeling & Design Equations, Santosh Vangala

Graduate Theses, Dissertations, and Problem Reports (ETD)

Glass fiber reinforced polymer (GFRP) composites have the potential to replace the existing conventional materials in Civil Engineering like steel and concrete. Such potential can be attributed to the numerous advantages GFRP composites have over conventional materials. Some of the advantages are: high strength-to-weight ratio, corrosion resistance, low life cycle cost and maintenance, nonmagnetic and electronic transparency. As the application of GFRP is on the rise, the need for developing accurate design equations for these materials has been imperative. The GFRP composites are manufactured through pultrusion and although they have numerous advantages they are less stiff than similar profiles made …

Reviews And Syntheses: Ocean Acidification And Its Potential Impacts On Marine Ecosystems, K. M.G. Mostofa, C. Q. Liu, W. D. Zhai, M. Minella, D. Vione, K. Gao, D. Minakata, T. Arakaki, T. Yoshioka, K. Hayakawa, E. Konohira, E. Tanoue, A. Akhand, A. Chanda, B. Wang, H. Sakugawa

Michigan Tech Publications, Part 1

Ocean acidification, a complex phenomenon that lowers seawater pH, is the net outcome of several contributions. They include the dissolution of increasing atmospheric CO2 that adds up with dissolved inorganic carbon (dissolved CO2, H2CO3, HCO3-, and CO32-) generated upon mineralization of primary producers (PP) and dissolved organic matter (DOM). The aquatic processes leading to inorganic carbon are substantially affected by increased DOM and nutrients via terrestrial runoff, acidic rainfall, increased PP and algal blooms, nitrification, denitrification, sulfate reduction, global warming (GW), and by atmospheric CO2 itself through enhanced photosynthesis. They are consecutively associated with enhanced ocean acidification, hypoxia in acidified …

An Assessment Of Polychlorinated Biphenyl Contamination In Fish From The Inland And Great Lakes Of Michigan, Emily Sokol

Dissertations, Master's Theses and Master's Reports

Fish within the Great Lakes region of North America are an invaluable resource with economic and cultural significance. While these fish are vital, they contain chemical pollutants that are hazardous to human health. One such man-made group of chemicals, polychlorinated biphenyl compounds (PCBs), continue to be a problem long after the ban on production (1979).

The objective of this research thesis was to assess PCB contamination in fish within the Great Lakes Region. This objective was completed by determining the sources of PCB contamination, defining the ecosystem characteristics that significantly affect fish contamination, predicting when it will be safe to …

Perspectives On Environmental Management System Requirements, Raquel Taveras

Dissertations, Master's Theses and Master's Reports

This report offers perspectives on effective environmental management procedures gained through field experience with the Peace Corps in Peru and with the United Nations Office for Project Services (UNOPS) in Copenhagen, Denmark. The work in Peru focused on case studies of rural water supply management within the context of local legislation and development strategies and environmental management principles. The objective of this study was to lay out a framework for future development workers and governmental agencies aiming to improve the administration and operation of rural water system. UNOPS on the other hand, as the operational arm of the UN for …

Kitchen 2.0: Investigation Of The Effect Of Ventilation On Indoor Air Quality, Kelli Marie Whelan

Dissertations, Master's Theses and Master's Reports

Even in today’s technology-filled world, nearly half of the global population still relies on some form of biomass to meet their daily energy requirement. Currently, improved combustion technologies (improved cookstoves) are the most common intervention to reduce fuel usage and to reduce human exposure to harmful products of incomplete combustion. This report explores an alternative option to cookstove replacement: ventilation as a low-cost, low-impact solution for health risk reduction.

Improving Flow Distribution In Small-Scale Water-Supply Systems Through The Use Of Flow-Reducing Discs And Methods For Analyzing The Effectiveness Of Solar Powered Pumping For A Drinking Water Supply In Rural Panama, Briana I. Drake

Dissertations, Master's Theses and Master's Reports - Open

As continued global funding and coordination are allocated toward the improvement of access to safe sources of drinking water, alternative solutions may be necessary to expand implementation to remote communities.

This report evaluates two technologies used in a small water distribution system in a mountainous region of Panama; solar powered pumping and flow-reducing discs. The two parts of the system function independently, but were both chosen for their ability to mitigate unique issues in the community. The design program NeatWork and flow-reducing discs were evaluated because they are tools taught to Peace Corps Volunteers in Panama.

Even when ample water …

Water Use And System Reliability Under Dieselgenerator And Solar Photovoltaic Powered Pumping Systems: A Case Study Of Solla Togo, Alicia R. Sherrin

Dissertations, Master's Theses and Master's Reports - Open

Access to improved potable water sources is recognized as one of the key factors in improving health and alleviating global poverty. In recently years, substantial investments have been made internationally in potable water infrastructure projects, allowing 2.3 billion people to gain access to potable water from 1990-2012. One such project was planned and installed in Solla, Togo, a rural village in the northern part of the country, from 2010-2012. Ethnographic studies revealed that, while the community has access to potable water, an estimated 45% of the village’s 1500 residents still rely on unprotected sources for drinking and cooking. Additionally, inequality …

Low Impact Development (Lid) Opportunities In The District Of Lamúd, Perú: A Study Of Hydrology, Costs And Maintenance Of Appropriate Stormwater Best Management Practices (Bmps), Olga M. Cano

Dissertations, Master's Theses and Master's Reports - Open

The study aims at identifying opportunities to implement Low Impact Development (LID) Best Management Practices (BMPs) for stormwater management, in the District of Lámud, Perú. Other studies have noted the importance of appropriate stormwater management as part of urban development in developing countries.

Environmental, economic and social aspects were analyzed to identify the most appropriate case. Stormwater Management Model (SWMM) 5.1, was used to obtain runoff results. Ten case scenarios were set up with LID BMP combinations of infiltration trenches, vegetated swales, and retention ponds. Water Environment Research Foundation (WERF) life cost models were used as a reference to calculate …

Timetable Management Technique In Railway Capacity Analysis: Development Of The Hybrid Optimization Of Train Schedules (Hots) Model, Hamed Pouryousef

Dissertations, Master's Theses and Master's Reports - Open

There are two general approaches to improve the capacity in a rail corridor, either by applying new capital infrastructure investment or by improving the operation of the rail services. Techniques to evaluate the railway operation include modeling and optimization through the use of commercial timetable management and rail simulation tools. However, only a few of the existing tools include complete features of timetable management techniques (e.g. timetable compression) are equipped with an optimization model for rescheduling and timetable improvement and this is especially true when it comes to the U.S. rail environment that prevalently uses unstructured operation practices.

This dissertation …

Stabilization Of Iron Mine Tailings Through Microbially Induced Calcite Precipitation, Noah D. Buikema

Dissertations, Master's Theses and Master's Reports - Open

Mine tailings are deposited into large-scale impoundments. Seasonal temperature fluctuations destabilize particles on the impoundment surface. Wind-induced shear stresses on the destabilized particles can in turn result in suspension of micron-sized particles into the atmosphere, creating dust storms that pose hazards to humans and the environment. Thus, efficient and sustainable methods of dust abatement are needed. One novel method for controlling dust emissions is biomodification. For example, Sporosarcina pasteurii can promote biocalcification in soil via ureolysis. However, application of this method to fined grained materials, such as mine tailings, is challenging. The goal of this work was to perform a …

The Use Of Jatropha Curcas To Achieve A Self Sufficient Water Distribution System: A Case Study In Rural Senegal, Alexandra Archer

Dissertations, Master's Theses and Master's Reports - Open

The use of Jatropha curcas as a source of oil for fueling water pumps holds promise for rural communities struggling to achieve water security in arid climates. The potential for use in developing communities as an affordable, sustainable fuel source has been highly recommended for many reasons: it is easily propagated, drought resistant, grows rapidly, and has high-oil-content seeds, as well as medicinal and economic potential. This study uses a rural community in Senegal, West Africa, and calculates at what level of Jatropha curcas production the village is able to be self-sufficient in fueling their water system to meet drinking, …

A Sub-Basin Water Resource Quantification And Aquifer Productivity Assessment For The Northwest Borehole Scheme Near Opuwo, Namibia, Lucas C. Moilanen

Dissertations, Master's Theses and Master's Reports - Open

Namibia is the most arid country in southern Africa, and is classified as experiencing medium-water stress from 2010-2014 by the Water Resources Institute (WRI) (World Bank, 2015) (Gassert, 2013). Increased water-resources management responsibility at the municipal level, population growth and urbanization trends necessitate community-scale quantification of water resources.

An annual water balance for the contributing sub-basin to Opuwo, Namibia was performed. The Behnke and Maxey method was used to estimate PET, and the methodology outlined by Allen, et al was used to determine soil moisture response to individual rainfall events for one hypothetical year. Water balance results indicate that of …

Bio-Inspired Optimal Fin Shape And Angle For Maximum Surfboard Stability, Megan S. Macneill

Dissertations, Master's Theses and Master's Reports - Open

Wave surfing is a multi-billion dollar industry involving both maneuverability and speed, yet little research has been done regarding optimal fins shape for these competing qualities. The purpose of this master's thesis was to focus on a single fin setup in order to identify a bio-inspired fin shape that maximized lateral stability while minimizing drag forces, in order to increase surfing maneuverability.

The computational fluid dynamic models NX and laboratory experiments performed in a water channel, with lift and drag being directly measured, were used to compare nine fins based on dorsal fins of real fish. To properly compare, fluid …

Application Of Hydrodynamic Models In Simulating The Thermal Regime Of Lake Superior, Rasika K. Gawde

Dissertations, Master's Theses and Master's Reports - Open

In large systems, such as the Great Lakes and coastal oceans, physical processes have a significant influence on chemical and biological phenomena. Hydrodynamic modeling assists in describing these physical characteristics and in recent years, these models have been extensively applied in the Great Lakes basin to study the response of the lake ecosystem to long-term meteorological forcing conditions.

Due to its role in mediating physical, biological and chemical processes in lake environments, water temperature (and the attendant thermal regime) has been the parameter of interest in many of these mathematical modeling studies and was adopted as the primary metric for …

Development Of A Fundamental Rating System For Identifying Sprawl: A Case Study Utilizing Small Cities In Michigan, Jonathan T. Riehl

Dissertations, Master's Theses and Master's Reports - Open

Urban sprawl research generally fits into one or more of four realms including definitions, causes, components, and consequences. Although research on consequences continues to thrive, research on components is in its adolescence, primarily due a lack of consensus on definition. Recent studies such as Ewing et al. 2014 have narrowed the list of sprawl metrics to about 20 within four factors including development density, land use mix, activity centering, and street accessibility.

This main product of this research is a Sprawl Scorecard for small Michigan cities varying in size from Traverse City, nearly 50,000 people in the urban cluster, down …