Civil and Environmental Engineering Commons^™

Data Driven, Performance Based Parking Management In A University Setting, Brian Maleck

All Theses

With university enrollment increasing, campuses are becoming under increased strain for parking. More students results in more cars on an already stressed parking infrastructure. In many instances, university parking management offices are being asked to accommodate this increase in parking without the construction of new parking infrastructure. In order to accommodate these demands, better parking management is required.
This research develops a framework to evaluate current parking management practices and pinpoint methods to improve upon current practices. The framework is generalized for use by any size and type of university. Clemson University's campus in Clemson, SC was used as a …

Removal Of Arsenic From Simulated Groundwater Using A Pilot-Scale Constructed Wetland Treatment System, Jeffrey Schwindaman

All Theses

A pilot-scale constructed wetland treatment system (CWTS) was designed and built to produce biogeochemical conditions that promoted targeted processes for removal of arsenic from simulated groundwater. Two series were designed to promote co-precipitation and sorption of arsenic with iron oxyhydroxides under oxidizing conditions, and two series were designed to promote precipitation of arsenic sulfide and co-precipitation of arsenic with iron sulfide under reducing conditions. The two major objectives were to (1) assess arsenic removal performance and (2) determine the fate and distribution of arsenic in each series. Results indicate that arsenic removal performance was greater in series designed to promote …

Probabilistic Back Analysis Of Geotechnical Systems, Lei Wang

All Theses

This thesis is aimed at applying the probabilistic approaches for back analysis of geotechnical systems. First, a probabilistic back-analysis of a recent slope failure at a site on Freeway No. 3 in northern Taiwan is presented. The Markov Chain Monte Carlo (MCMC) simulation is used to back-calculate the geotechnical strength parameters and the anchor force. These inverse analysis results, which agree closely with the findings of the post-event investigations, are then used to validate the maximum likelihood method, a computationally more efficient back-analysis approach. The improved knowledge of the geotechnical strength parameters and the anchor force gained through the probabilistic …

Evaluation Of Anaerobic Biodegradation Of High Concentrations Of Halogenated Methanes, Priya Rachel Jacob

All Theses

Removal of the chlorinated methanes, carbon tetrachloride (CT), chloroform (CF) and dichloromethane (DCM), and the halogenated methane, trichlorofluoromethane (commonly known as CFC-11 or Freon-11) from contaminated soil and groundwater remains challenging. Releases to the environment resulted from historically poor disposal practices, as well as spills and leaks from underground storage tanks. Among these three compounds, CF is considered the benchmark for evaluating the feasibility of bioremediation, due to its typically high level of toxicity towards most anaerobic prokaryotes. However, inhibitory effects of low concentrations of CFC-11 on anaerobes have been reported as well. Bioremediation is an attractive option for clean-up, …

Describing Plutonium Contamination Issues In Hanford Soils: Development Of A Thermodynamic Surface Complexation Model, Sarah Herr

All Theses

The development of remediation strategies for long-term site management requires knowledge of an actinide's geochemical behavior. Understanding this behavior can lead to the formation of a subsurface transport model. For example, plutonium mobility in the subsurface environment is significantly influenced by oxidation-reduction and complexation reactions. This work considered the surface-mediated reduction of plutonium, as well as the hydrolysis and carbonate complexation of the actinide.
Evaluating the significance of these reactions required several variable pH batch sorption studies. Experiments incorporated plutonium and neptunium sorption to sediments from the Hanford Nuclear Reservation in Washington State. Two different sediments were examined: coarse-grained and …

Corrosion Activity In Precast Concrete Elements And Cementitious Closure Pours, Shabi Abbas Udaipurwala

All Theses

The use of prefabricated elements in the construction of highway bridges has been a common practice in the United States since 1950s. Precast concrete adjacent box beam girder bridges are quite popular given that the precast elements not only have structural capacity to span across the supports, but also form the bridge deck. These bridges have generally performed well during the initial years after construction, but recent failures in Pennsylvania and Indiana have aroused a nationwide alarm to investigate the causes of failure and find solutions to repair these bridges or develop design for new replacement bridges. It was found …

Development Of A Rating System To Measure The Vulnerability Of Residential Homes To Natural Hazards, Corey Cattano

All Dissertations

Hurricanes and tropical storms continue to damage the United States coastline where population migration increases and tourism thrives. Extended dry spells, high winds, and hot summers in the Mountain and Pacific West regions promote ideal conditions for seemingly uncontrollable wildfires. Additionally, the increased frequency of unstable climate conditions foretells signs of Mother Nature not letting up. With recent events such as Superstorm Sandy and the Waldo Canyon wildfires in mind, there is a strong need to improve hazard mitigation techniques in residential homes and encourage resilient building methods. Research within this field is challenging due to the lack of descriptive …

Miniature Concrete Prism Test - A New Test Method For Evaluating The Asr Potential Of Aggregates, The Effectiveness Of Asr Mitigation And The Job Mixture, Enamur Latifee

All Dissertations

Existing test methods to characterize ASR potential of aggregates and mitigation ability of supplementary cementing materials such as the Accelerated Mortar Bar Test (AMBT) and the Concrete Prism Test (CPT) are widely accepted in the industry. Although, the AMBT is a rapid test, the results from this test can be unreliable, particularly with certain types of aggregates. The CPT is considered as a more reliable test; however, the duration of this test method renders it impractical for routine usage in the industry to screen deleterious materials or inefficient ASR mitigation measures. This research presents a new test method-Miniature Concrete Prism …

Calibration Of Microscopic Traffic Flow Models Considering All Parameters Simultaneously, Victor Hugo Molano Paz

UNLV Theses, Dissertations, Professional Papers, and Capstones

This study proposes a methodology to calibrate microscopic traffic flow simulation models. The proposed methodology has the capability to calibrate simultaneously all the calibration parameters as well as demand patterns for any network topology. These parameters include global and local parameters as well as driver behavior and vehicle performance parameters; all based on multiple performance measures, such as link counts and speeds. Demand patterns are included in the calibration framework in terms of turning volumes.

A Simultaneous Perturbation Stochastic Approximation (SPSA) algorithm is proposed to search for the vector of the model‟s parameters that minimizes the difference between actual and …

Phosphorus Removal From Ebpr Sludge Dewatering Liquors Using Lanthanum Chloride, Aluminum Sulfate And Ferric Chloride, Michael Strileski

UNLV Theses, Dissertations, Professional Papers, and Capstones

In wastewater treatment, enhanced biological phosphorus removal (EBPR) is becoming an increasingly popular alternative to chemical precipitation (CP) because of its lower costs and reduced sludge production. However, downstream solids handling processes such as digestion, sludge storage and dewatering promote an undesirable release (i.e. secondary release) of polyphosphate that was stored within EBPR sludge. Released phosphate is recycled to the head of the plant with the liquors of sludge dewatering processes. The concentration of phosphate in recycle streams from EBPR systems can be one to two orders of magnitude higher than the influent phosphorus concentration entering the EBPR system. Plants …

Volatile Organic Compound Emissions From Surface Coating Facilities: Characterization Of Facilities, Estimation Of Emission Rates, And Dispersion Modeling Of Off-Site Impacts, Annabrabha Athappan, Sulak Sumitsawan, Roja Haritha Gangupomu, Ketwalee Kositkanawuth, Parthen Parikh, Benjamin Nmai Afotey, Neelesh Sule, Sahithi Raj Kalidindi, Melanie L. Sattler, Yvette Pearson Weatherton

Civil Engineering Faculty Publications - Archive

Surface coating facilities are major sources of volatile organic compounds (VOCs) in urban areas. These VOCs can contribute to ground-level ozone formation, and many are hazardous air pollutants (HAPs), including xylene, ethylbenzene, and toluene. This project was conducted in order to provide information for updating the Texas Commission on Environmental Quality (TCEQ), USA, permit by rule for Surface Coating Facilities. Project objectives were: 1) To develop a database of information regarding surface coating facilities in Texas; 2) To estimate maximum emission rates for various VOC species from surface coating facilities in Texas; 3) To conduct dispersion modeling to estimate off-site …

Post Weld And Epoxy Anchorage Variations For W-Beam Guardrail Attached To Low-Fill Culverts, Scott K. Rosenbaugh, Ronald K. Faller, Dean L. Sicking, Robert W. Bielenberg, Craig W. Price, John D. Reid

Nebraska Department of Transportation: Research Reports

No abstract provided.

Accuracy Analysis Of Parallel Method Based On Non-Overlapping Domain Decomposition Method, Moonho Tak, Yooseob Song, Hye-Kwan Jeon, Taehyo Park

Civil Engineering Faculty Publications

In this paper, an accuracy analysis of parallel method based on non-overlapping domain decomposition method is carried out. In this approach, proposed by Tak et al.(2013), the decomposed subdomains do not overlap each other and the connection between adjacent subdomains is determined via simple connective finite element named interfacial element. This approach has two main advantages. The first is that a direct method such as gauss elimination is available even in a singular problem because the singular stiffness matrix from floating domain can be converted to invertible matrix by assembling the interfacial element. The second is that computational time and …

Evaluation Of Broiler Litter Heat Production During Windrowing & Nitrogen Based Gas Emission Mitigation Using Biofilter, Min Lei

Graduate Theses and Dissertations

Ammonia emission from animal feeding operations (AFOs) has negative effects on environment and animals' health. Thus measuring and mitigating ammonia emission from AFOs is important for environmental protection. In chapter I, different ammonia measurements were discussed and a mitigation technology- biofilter was represented.

In-house windrowing of built-up litter has been used by broiler producers to reduce pathogen loads and rejuvenate litter for the next flock. When litter is piled up for an extended period during downtime, heat generated by the litter pile can become a substantial heat source due to the metabolism of microorganisms. In chapter II, heat production rates …

Parameterizing Analytical Models To Support An Empirically Based Warehouse Design Methodology, Lisa Thomas

Graduate Theses and Dissertations

Research in the area of warehouse design is characterized by a myriad of analytical models that address one, typically small and isolated, area of the warehouse. These models, although important in gaining insight into one question of warehouse design, are of limited value when one considers the larger question of overall warehouse design. Thus, research in the area of overall warehouse design typically consists of procedure-driven processes based on qualitative factors and not the quantifiable results of analytical models.

In contrast, practitioners have significant empirical data related to how a design alternative performs in an industry, a company, or a …

Functional Ontologies And Their Application To Hydrologic Modeling: Development Of An Integrated Semantic And Procedural Knowledge Model And Reasoning Engine, Aaron Range Byrd

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In hydrology we straddle the domains of science and engineering. As hydrologists our goal is to predict the movement and volume of water. As scientists we seek to improve our understanding of water-related processes and how to model them. As engineers we seek to be able answer specific water-related questions to provide protection and an essential resource for the people we serve. Underlying all of our work is a body of knowledge that we have developed and continue to develop. This knowledge involves many aspects, such as the role of various hydrologic processes, how to obtain data, computational models that …

Juxtaposing Nasa’S Aeronet Aod With Carb Pm Data Over The San Joaquin Valley To Facilitate Multi-Angle Imaging Spectroradiometer (Misr) Pm Pollution Research, John Kanemoto

STAR Program Research Presentations

Airborne particulate matter (PM) has been shown to increase the risk for asthma, chronic bronchitis, cardiopulmonary complications, and respiratory cell membrane damage/infection/leakage. PM levels are currently analyzed from two perspectives: stationary land-based monitoring (LBM) sites and total Aerosol Optical Depth (AOD) atmospheric column measurements. Both perspectives often leave miles of space between measuring locations and will have a continually increasing cost from introducing/maintaining sites. The Multi-angle Imaging SpectroRadiometer (MISR) satellite team hopes to begin investigating/archiving PM levels comprehensively via inputting MISR AOD measurements into a function/model which predicts the amount of ground level PM.

In the future, multivariable spatial correlations …

Effect Of Differential Movement Of Straight Reinforcing Bars During Early Age Curing On The Bond Strength, Tyler Andrews

All Theses

As the nation's infrastructure continues to age, the number of structural deficiencies is rising. Accordingly, there is a great need and desire to replace these failing components in a quick and efficient fashion. Prefabricated elements for structures such as bridges and parking decks are commonly implemented in this process in order to save both time and money. These prefabricated elements are often subjected to moving live loads during construction and repair which, consequently, result in differential movements occurring across the joints connecting the elements of these structures. Potential reductions in joint capacity, joint stiffness, and structural durability are the byproducts …

Air Pressure Energy Storage For Reverse Osmosis: Bench-Scale Proof Of Concept, Ying Sun

All Theses

Society faces diminishing access to clean drinking water because of increasing global population and the development of modern industries. At the same time, climate change and other environmental problems caused by the increase in fossil fuel consumption the emphasis on reducing dependency on traditional energy resources in the process of potable water production. To address both problems, a small-scale wind powered reverse osmosis (RO) desalination system with a unique energy storage mechanism was envisioned to provide an energy buffer such that fluctuating and intermittent wind can be utilized. Energy is stored in the form of compressed air in a pressure …

An Analysis Of A Missing Design Concept For Sustainable Buildings: Addressing The Safety And Health Of The Construction Worker, Christopher Almond

All Theses

Construction work is inherently dangerous. The 2010 U.S. Bureau of Labor Statistics show the construction industry had the most fatal injuries of all industry sectors, 17%. U.S. regulations place the responsibility for construction safety on the construction contractor. However, owners and designers have the potential to affect the safety of the construction workforce. Owners have gotten more involved in promoting the safety and health of construction workers in recent years; however, studies show that the safety and health of the construction workforce is not typically considered by designers.
The Naval Facilities Engineering Command (NAVFAC) - the U.S. Navy's systems command …

The Extraction Of Acetic Acid From Thermotoga Neapolitana Fermentation Spent Medium Using Fresh/Recovered Aliquat 336 And Produce Cma, Yifan Du

All Theses

To offer an alternative pathway to produce calcium magnesium acetate (CMA) as an environmental friendly deicer to relieve the pressure on fossil fuels demand, a liquid-liquid extraction process was studied. This process includes using Aliquat 336 (tri-n-octylmethylammonium chloride) diluted in kerosene as an organic extractant to extract acetic acid from Thermotoga neapolitana fermentation spent medium, which contained 34 g/L of acetic acid and 10 g/L of NaCl.
The extraction efficiency of Aliquat 336 was studied under several different extraction conditions. The initial pH of the spent medium was adjusted to a pH range of 2.25 to 5.75 with a 0.5 …

Impact Of Channel Conditions On Existing Scour Measuring Instruments, Md Nasimul Hoque Chowdhury

All Theses

Scour around bridge piers and abutments, is the prominent reason for bridge failures. Bridge failures have substantial effects on economy and human lives. About 60% of the total bridge failures in U.S. can be attributed to scour. In the past, scour has been responsible for several million dollars in bridge repair cost. Given the threat to the bridge infrastructure due to scour, the U.S. Federal Highway Administration has proposed several countermeasures to reduce the impact of bed degradation. One of these countermeasures that is particularly relevant during peak flow periods is the real-time scour monitoring. Scour monitoring involves real-time data …

Application Of Parameter Estimation And Calibration Method For Car-Following Models, Md Rahman

All Theses

Both safety and the capacity of the roadway system are highly dependent on the car-following characteristics of drivers. Car-following theory describes the driver behavior of vehicles following other vehicles in a traffic stream. In the last few decades, many car-following models have been developed; however, studies are still needed to improve their accuracy and reliability.
Car-following models are a vital component of traffic simulation tools that attempt to mimic driver behavior in the real world. Microscopic traffic simulators, particularly car-following models, have been extensively used in current traffic engineering studies and safety research. These models are a vital component of …

Modeling Benefits Of Implementing Low Impact Development Practices Within Forecasted Growth Scenarios Of The Reedy River Watershed, Stephen Taylor

All Theses

For this research, a previously developed comprehensive watershed water quality model for the Reedy River as developed for South Carolina Department of Health and Environmental Control (SCDHEC) and the US Environmental Protection Agency (EPA) as a total maximum daily load (TMDL) assessment tool was used to assess the benefits of using low impact development (LID) designs in future growth of Greenville County, within the Reedy River watershed. The original intent of this model was to provide SCDHEC with a defensible model that could be used to prepare nutrient TMDLs for an area located at Boyd Millpond and the Reedy River …

Hydraulic Impact Of Porosity Distribution And Hydrologic Characterization Of Porous Pavements, William Martin

All Dissertations

This research focused on the hydrologic characterization of porous pavement and pavement properties that can affect its hydraulic behavior. The first of these properties investigated was the presence of a vertical porosity distribution which can significantly impact the infiltration rate. A method utilizing image analysis was tested and experimentally verified. The representative elemental area (REA) was needed for this imaging method and was found to be 83.9 cm2 (13 in2). To convert the porosity distribution into a permeability distribution the relationship between porosity and permeability was found using homogenous samples. From the resulting permeability distribution an effective permeability was found …

Development Of An Environmental And Operational Impact Assessment Framework For Connected Vehicle Technology Supported Alternative Fuel Vehicles, Parth Bhavsar

All Dissertations

The efforts of US automobile manufacturers to introduce Alternative Fuel Vehicles (AFVs) to the automobile market, and reduce fossil fuel dependency are changing the energy consumption scenario of the US transportation network. The evolution in Connected Vehicle Technology (CVT) is further accelerating the vision of a safe and sustainable transportation system for the 21st century. However, before such system can be an actuality to meet future US transporation needs, a new generation of traffic micro-simulation tools must be developed to evaluate connected vehicle technologies that can support AFVs in the transportation network.
This research focused on developing an evaluation framework …

Optimizing Scm Proportions To Meet Multiple Performance Characters Of Ternary Concrete Mixtures Using Simplex-Centroid Design And Analysis Techniques, Sujay Math

All Dissertations

High performance concrete mixtures often contain multiple cementitious components. Among these, cement is the most expensive in addition to having a higher carbon footprint. Life cycle assessment of cement production reveals that the cement content is the most important factor in determining a concrete mixture's embodied energy and carbon footprint. Compressive strength, an important property of concrete, is directly related to the quantity of cement used in the mixture. However, higher quantities of cement lead to durability issues. The increased concerns about the durability of concrete over the past decade have increased focus on improving the long-term performance of concrete …

Freeze-Thaw Durability Of Portland Cement Concrete Due To Addition Of Crumb Rubber Aggregates, Shubhada Gadkar

All Dissertations

Ground tire rubber also known as crumb rubber has been widely used in asphalt concrete over the past several years due to its ability to improve temperature susceptibility of asphalt binders and enhance the performance of asphalt pavements. However, its inclusion in portland cement concrete is comparatively recent and more research is needed before adopting it as a regular construction material. Past research has shown that while addition of rubber aggregates in concrete reduces its compressive, tensile and flexural strengths, but is useful in improving durability properties as freeze-thaw resistance due to the ability of crumb rubber to generate an …

Development And Evaluation Of An Intelligent Transportation Systems-Based Architecture For Electric Vehicles, Zhiyun Li

All Dissertations

The rapid development of increasingly complex in-vehicle electronics now offers an unprecedented level of convenience and versatility as well as accelerates the demand for connected driving experience, which can only be achieved in a comprehensive Intelligent Transportation Systems (ITS) technology based architecture. While a number of charging and range related issues continue to impede the Electric Vehicle (EV) market growth, integrating ITS technologies with EVs has the potential to address the problems and facilitate EV operations. This dissertation presents an ITS based vehicle infrastructure communication architecture in which abundant information can be exchanged in real time through vehicle-to-vehicle and vehicle-to- …

Young’S Modulus And Volume Porosity Relationships For Additive Manufacturing Applications, John Anthony Choren, Stephen M. Heinrich, M. Barbara Silver-Thorn

Civil and Environmental Engineering Faculty Research and Publications

Recent advancements in additive manufacturing (or rapid prototyping) technologies allow the fabrication of end-use components with defined porous structures. For example, one area of particular interest is the potential to modify the flexibility (bending stiffness) of orthopedic implants through the use of engineered porosity (i.e., design and placement of pores) and subsequent fabrication of the implant using additive manufacturing processes. However, applications of engineered porosity require the ability to accurately predict mechanical properties from knowledge or characterization of the pore structure and the existence of robust equations characterizing the property–porosity relationships. As Young’s modulus can be altered by variations in …