Open Access. Powered by Scholars. Published by Universities.®

Civil and Environmental Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2009

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 61 - 90 of 655

Full-Text Articles in Civil and Environmental Engineering

An Improved Cube Cell Assembly For The Use With High Pressure/High Temperature Cubic Apparatus In Manufacturing Polycrystalline Diamond Compact Inserts, Kevin Christian Bach Nov 2009

An Improved Cube Cell Assembly For The Use With High Pressure/High Temperature Cubic Apparatus In Manufacturing Polycrystalline Diamond Compact Inserts, Kevin Christian Bach

Theses and Dissertations

The goal for this research was to reduce the current manufacturing cost of the polycrystalline diamond compact (PDC) inserts utilized in the natural gas and oil drilling industry while not reducing their current performance. Polycrystalline Diamond is added to the tungsten-carbide (WC) substrates commonly utilized in these applications because of its greater wear and thermal resistance. With the current cube cell design for the high-pressure/high-temperature apparatus, it is necessary to bond an extra WC substrate to the polycrystalline diamond insert to achieve the sizes generally ordered by the customers. The problem of bonding the extra WC substrate was solved by …

Go to article

Total Storm Management Manual, Indiana Department Of Transportation Nov 2009

Total Storm Management Manual, Indiana Department Of Transportation

JTRP Other Publications and Reports

No abstract provided.

Go to article

Structural Damage Localization With Tolerance To Large Time Synchronization Errors In Wsns, Guirong Yan, Shirley J. Dyke, Wei Song, Gregory Hackmann, Chenyang Lu Nov 2009

Structural Damage Localization With Tolerance To Large Time Synchronization Errors In Wsns, Guirong Yan, Shirley J. Dyke, Wei Song, Gregory Hackmann, Chenyang Lu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

With Recent Technological Advances in Smart Sensor Platforms, Structural Condition Monitoring Implementations based on Wireless Sensor Networks (WSNs) Have Received Considerable Attention. Modal Identification is an Integral Step in Many Structural Condition Monitoring Systems. However, Accurate Time Synchronization is Not Always Possible, Leading to Incorrect Identification of the Mode Shapes. Although Strict Time Synchronization of the Wireless Sensors Has Been Viewed as Crucial for the Identification of Mode Shapes, a New Perspective is Taken Herein. the Distortion in the Identified Mode Shapes is Characterized and Accommodated. Then the Resulting Mode Shapes Are Used with a Flexibility-Based Damage Detection Approach to …

Go to article

The International Charter And Flood Mapping, Jie Shan Nov 2009

The International Charter And Flood Mapping, Jie Shan

GIS Day

An overview of recent Purdue activities related to the International Charter for Space and Major Disasters, including general information about The Charter, 3 Indiana flood examples, and a summary of the lessons learned therefrom.

Go to article

Variability In Construction Of Cement-Treated Base Layers: Probabilistic Analysis Of Pavement Life Using Mechanistic-Empirical Approach, Tyler J. Rogers Nov 2009

Variability In Construction Of Cement-Treated Base Layers: Probabilistic Analysis Of Pavement Life Using Mechanistic-Empirical Approach, Tyler J. Rogers

Theses and Dissertations

The primary objective of this research was to quantify the improvement in service life of a flexible pavement constructed using full-depth reclamation (FDR) in conjunction with cement stabilization when specified reductions in the spatial variability of specific construction-related parameters are achieved. This study analyzed pavement data obtained through field and laboratory testing of a reconstruction project in northern Utah. Data analyses included multivariate regression, Monte Carlo simulation, and mechanistic-empirical analyses of a model pavement structure. The results of the research show a steadily increasing trend in 28-day unconfined compressive strength of the cement-treated base (CTB) layer with increasing reductions in …

Go to article

Automated Calibration Of The Gssha Watershed Model: A Look At Accuracy And Viability For Routine Hydrologic Modeling, Kayson M. Shurtz Nov 2009

Automated Calibration Of The Gssha Watershed Model: A Look At Accuracy And Viability For Routine Hydrologic Modeling, Kayson M. Shurtz

Theses and Dissertations

The goal of hydrologic models is to accurately predict a future event of a given magnitude. Historic data are often used to calibrate models to increase their ability to forecast accurately. The GSSHA model is a distributed model that uses physical parameters and physics based computations to compute water flow from cell to cell based on a 2 dimensional grid. The goal of calibration is to obtain good estimates for the actual parameters of the watershed. These parameters should then transfer to other storm events of different magnitudes more easily than an empirical model. In conducting this research three watersheds …

Go to article

East Bay Energy Consortium Siting Study Kickoff Meeting, November 17, 2009, East Bay Energy Consortium Nov 2009

East Bay Energy Consortium Siting Study Kickoff Meeting, November 17, 2009, East Bay Energy Consortium

East Bay Energy Consortium Meeting Minutes

No abstract provided.

Go to article

Intrusion Detection Methods And Apparatus That Use A Building's Infrastructure As Part Of A Sensor, Nikola Subotic, Christopher Roussi, Peter Jensen, William Buller Nov 2009

Intrusion Detection Methods And Apparatus That Use A Building's Infrastructure As Part Of A Sensor, Nikola Subotic, Christopher Roussi, Peter Jensen, William Buller

Michigan Tech Patents

Intrusion detection methods and apparatus exploit the infrastructure of the building itself. The preferred embodiments use the existing power line infrastructure to provide power, data, and sensor observables to a monitoring system which is simply connected at one point, namely, the connection of the building to the city power grid. Computer network interfaces may also be used. In terms of sensors, impedance, capacitive, inductive, electric field and Radar modalities may be used.

Go to article

East Bay Energy Consortium Legal Committee Meeting Minutes, November 16, 2009, East Bay Energy Consortium Nov 2009

East Bay Energy Consortium Legal Committee Meeting Minutes, November 16, 2009, East Bay Energy Consortium

East Bay Energy Consortium Meeting Minutes

No abstract provided.

Go to article

East Bay Energy Consortium Budget Committee Meeting Minutes, November 16, 2009, East Bay Energy Consortium Nov 2009

East Bay Energy Consortium Budget Committee Meeting Minutes, November 16, 2009, East Bay Energy Consortium

East Bay Energy Consortium Meeting Minutes

No abstract provided.

Go to article

Precast Post-Tensioned Segmental Pole System: U.S. Patent No. Us 6,851,231 B2, Maher K. Tadros, E. Terence Foster, Sherif A. Yehia, Audra L. Hansen Nov 2009

Precast Post-Tensioned Segmental Pole System: U.S. Patent No. Us 6,851,231 B2, Maher K. Tadros, E. Terence Foster, Sherif A. Yehia, Audra L. Hansen

Department of Civil and Environmental Engineering: Faculty Publications

A precast post-tensioned segmental pole system capable of supporting a load is provided. The pole system includes a plurality of pole segments that use connectors and strands to anchor them together. The strands extend within a cavity formed in the pole segments and are external to the wall structure of the pole segments. The strands may be coupled between both of the pole segments, or be anchored to a connector. The connector includes an upper piece that is coupled to one pole segment, and a lower piece that is coupled to the other pole segment. Upper and lower pieces interlock …

Go to article

East Bay Energy Consortium Meeting Minutes, November 2, 2009, East Bay Energy Consortium Nov 2009

East Bay Energy Consortium Meeting Minutes, November 2, 2009, East Bay Energy Consortium

East Bay Energy Consortium Meeting Minutes

No abstract provided.

Go to article

Semi-Automatic Image Segmentation For Volumetric Visualization Of Pelvis Ct Scan-Images, Suprijanto Suprijanto, Farida I. Muchtadi, Irwan Setiawan Nov 2009

Semi-Automatic Image Segmentation For Volumetric Visualization Of Pelvis Ct Scan-Images, Suprijanto Suprijanto, Farida I. Muchtadi, Irwan Setiawan

Makara Journal of Technology

Semi-Automatic Image Segmentation for Volumetric Visualization of Pelvis CT Scan-Images. The current development of computerized tomography (CT) has enable us to obtain cross sectional image using multi slicing techniques in an order of few seconds. The obtained images represent several tissue structures on cross section slice being imaged. One challenge to help diagnosis using CT images is extracting an anatomic structure of interest using a method of image segmentation and volumetric visualization with the assistance of computers. In case of volumetric visualization of pelvis bones extracted from multi-slice CT images, whole images which are containing part of pelvis bone structures …

Go to article

Implementation Of Six Sigma Method To Maintain The Quality Of Construction Projects, Yusuf Latief, Retyaning Puji Utami Nov 2009

Implementation Of Six Sigma Method To Maintain The Quality Of Construction Projects, Yusuf Latief, Retyaning Puji Utami

Makara Journal of Technology

Implementation of Six Sigma Method to Maintain The Quality of Construction Projects. Six sigma (6-sigma) is a method that widely developed in the world, especially in manufacturing industry to decrease failures in achieving good quality in construction projects. The objective of this research is to explore the existing condition of quality management and the aplication of 6-sigma method in maintaining quality of construction projects. Structured interviews to experienced experts and people who were recommended by their companies were conducted. Non-parametric analysis using frequencies distribution procedures were used for analysis. The result shows that existing condition in quality management of construction …

Go to article

Mechanical Properties Of Ramie Fiber Reinforced Epoxy Lamina Composite For Socket Prosthesis, Tresna P. Soemardi, Widjajalaksmi Kusumaningsih, Agustinus Purna Irawan Nov 2009

Mechanical Properties Of Ramie Fiber Reinforced Epoxy Lamina Composite For Socket Prosthesis, Tresna P. Soemardi, Widjajalaksmi Kusumaningsih, Agustinus Purna Irawan

Makara Journal of Technology

Mechanical properties of ramie fiber reinforced epoxy lamina composite for socket prosthesis. This paper presents an investigation into the application of natural fiber composite especially ramie fiber reinforced epoxy lamina composite for socket prosthesis. The research focuses on the tensile and shear strength from ramie fiber reinforced epoxy lamina composite which will be applied as alternative material for socket prosthesis. The research based on American Society for Testing Material (ASTM) standard D 3039/D 3039M for tensile strength and ASTM D 4255/D 4255M-83 for shear strength. The ramie fiber applied is a fiber continue 100 % Ne14'S with Epoxy Resin Bakelite …

Go to article

Potency Of Thermoelectric Generator For Hybrid Vehicle, Nandy Putra, Raldi Artono Koestoer, Mohammad Adhitya, Ardian Roekettino, Bayu Trianto Nov 2009

Potency Of Thermoelectric Generator For Hybrid Vehicle, Nandy Putra, Raldi Artono Koestoer, Mohammad Adhitya, Ardian Roekettino, Bayu Trianto

Makara Journal of Technology

Potency of Thermoelectric Generator for Hybrid Vehicle. Thermoelectric Generator (TEG) has been known as electricity generation for many years. If the temperature difference occurred between two difference semi conductor materials, the current will flow in the material and produced difference voltage. This principle is known as Seebeck effect that is the opposite of Peltier effect Thermoelectric Cooling (TEC). This research was conducted to test the potential of electric source from twelve peltier modules. Then, these thermoelectric generators were applied in hybrid car by using waste heat from the combustion engine. The experiment has been conducted with variations of peltier module …

Go to article

Effects Of Ph On Calcium Carbonate Precipitation Under Magnetic Field, Nelson Saksono, Yuliusman Yuliusman, Setijo Bismo, Roekmijati W. Soemantojo, Azwar Manaf Nov 2009

Effects Of Ph On Calcium Carbonate Precipitation Under Magnetic Field, Nelson Saksono, Yuliusman Yuliusman, Setijo Bismo, Roekmijati W. Soemantojo, Azwar Manaf

Makara Journal of Technology

Magnetic field effect on CaCO3 precipitation is the key parameter in evaluating the effectiveness of Anti-scale Magnetic Treatment (AMT). The purpose of this study was to investigate magnetic fields influence on CaCO3 precipitation in high and low super-saturated CaCO3 solution by varied pH CaCO3 solution using circulation flow fluid system. The observation results in the high super saturated solution (pH 8.5) showed the increase of precipited CaCO3 in magnetized solutions compared to those in non-magnetic solution during circulation process. In the low super-saturated CaCO3 solution (pH 6.4) it was found that magnetic treatment increased CaCO3 precipitation after circulation process. In …

Go to article

Performance Of Hollow Fiber Membrane Gas-Liquid Contactors To Absorb Co2 Using Diethanolamine (Dea) As A Solvent, Sutrasno Kartohardjono, Pan Ade Nata, Eko Prasetio, Yuliusman Yuliusman Nov 2009

Performance Of Hollow Fiber Membrane Gas-Liquid Contactors To Absorb Co2 Using Diethanolamine (Dea) As A Solvent, Sutrasno Kartohardjono, Pan Ade Nata, Eko Prasetio, Yuliusman Yuliusman

Makara Journal of Technology

This study uses DEA solution to absorb CO2 from the gas flow through the hollow fiber membrane contactors. This study aims to evaluate the performance of hollow fiber membrane contactors to absorb CO2 gas using DEA solution as solvent through mass transfer and hydrodynamics studies. The use of DEA solution is to reduce the mass transfer resistance in the liquid phase, and on the other side, the large contact area of the membrane surface can cover the disadvantage of membrane contactors; additional mass transfer resistance in the membrane phase. During experiments, CO2 feed flows through the fiber lumens, while the …

Go to article

Intermetallic Cu3sn Phase Layer On Electrode’S Tip Of Galvanized Resistance Spot Welding, Muhammad Anis, Aulia Irsyadi, Deni Ferdian Nov 2009

Intermetallic Cu3sn Phase Layer On Electrode’S Tip Of Galvanized Resistance Spot Welding, Muhammad Anis, Aulia Irsyadi, Deni Ferdian

Makara Journal of Technology

Intermetallic Cu3Sn Phase Layer on Electrode’s Tip of Galvanized Resistance Spot Welding. A resistance spot welding method is commonly used in automotive industries application. In a resistance spot welding method, the copper electrode has a significant role as an electric current carrier for joining thin metal sheet. This research was focused on studying the effect of tin layer at the electrode tip for joining galvanized steel sheet. The main variable of this research is in the thickness of the intermetallic Cu3Sn layer. The result showed that the introduction of tin layer less than 1 μm in thickness on the electrode …

Go to article

Simple Ml Detector For Multiple Antennas Communication System, Ahmad Taqwa, Soegijardjo Soegijoko, Sugihartono Sugihartono, Suhartono Tjondronegoro Nov 2009

Simple Ml Detector For Multiple Antennas Communication System, Ahmad Taqwa, Soegijardjo Soegijoko, Sugihartono Sugihartono, Suhartono Tjondronegoro

Makara Journal of Technology

Simple ML Detector for Multiple Antennas Communication System. In order to support providing broadband wireless communication services against limited and expensive frequency bandwidth, we have to develop a bandwidth efficient system. Therefore, in this paper we propose a closed-loop MIMO (Multiple-Input-Multiple-Output) system using ML (Maximum Likelihood) detector to optimize capacity and to increase system performance. What is especially exciting about the benefits offered by MIMO is that a high capacity and performance can be attained without additional frequency-spectral resource. The grand scenario of this concept is the attained advantages of transformation matrices having capability to allocate transmitted signals power suit …

Go to article

Reduced Uncertainty Of Ground Motion Prediction Equations Through Bayesian Variance Analysis, Robb E.S. Moss Nov 2009

Reduced Uncertainty Of Ground Motion Prediction Equations Through Bayesian Variance Analysis, Robb E.S. Moss

Civil and Environmental Engineering

A ground motion prediction equation estimates the mean and variance of ground shaking with distance from an earthquake source. Current relationships use regression techniques that treat the input variables or parameters as exact, neglecting the uncertainties associated with the measurement of shear wave velocity, moment magnitude, and site-to-source distance. This parameter uncertainty propagates through the regression procedure and results in model uncertainty that overestimates the inherent variability of the ground motion. This report discusses methods of estimating the statistical uncertainty of the input parameters, and procedures for incorporating the parameter uncertainty into the regression of ground motion data using a …

Go to article

Coaxial Cable Sensors And Sensing Instrument For Crack Detection In Bridge Structures -- Phase I: Field Qualification/Validation Planning, Genda Chen, Fujian Tang, Zhi Zhou Nov 2009

Coaxial Cable Sensors And Sensing Instrument For Crack Detection In Bridge Structures -- Phase I: Field Qualification/Validation Planning, Genda Chen, Fujian Tang, Zhi Zhou

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The objectives of this study are to pre-test analyze a decommissioned RC bridge that is selected in consultation with New York State Department of Transportation (NYSDOT), and design and plan the field tests of the bridge for the performance qualification and validation of distributed crack sensors and a fast Electrical Time Domain Reflectometry (ETDR) instrument to their full potential. The scope of work includes: (a) Selection of a decommissioned bridge, (b) Pre-test analysis of the select bridge structure to evaluate its progressive damage and determine the locations for sensor deployment, (c) Design and planning of field tests of the select …

Go to article

Microalgal Biomass For Greenhouse Gas Reductions: Potential For Replacement Of Fossil Fuels And Animal Feeds, D. E. Brune, Tryg Lundquist, J. R. Benemann Nov 2009

Microalgal Biomass For Greenhouse Gas Reductions: Potential For Replacement Of Fossil Fuels And Animal Feeds, D. E. Brune, Tryg Lundquist, J. R. Benemann

Civil and Environmental Engineering

Microalgal biomass production offers a number of advantages over conventional biomass production, including higher productivities, use of otherwise nonproductive land, reuse and recovery of waste nutrients, use of saline or brackish waters, and reuse of CO2 from power-plant flue gas or similar sources. Microalgal biomass production and utilization offers potential for greenhouse gas (GHG) avoidance by providing biofuel replacement of fossil fuels and carbon-neutral animal feeds. This paper presents an initial analysis of the potential for GHG avoidance using a proposed algal biomass production system coupled to recovery of flue-gas CO2 combined with waste sludge and/or animal manure …

Go to article

Algae Grown On Dairy And Municipal Wastewater For Simultaneous Nutrient Removal And Lipid Production For Biofuel Feedstock, Ian Woertz, A. Feffer, Tryg Lundquist, Yarrow Nelson Nov 2009

Algae Grown On Dairy And Municipal Wastewater For Simultaneous Nutrient Removal And Lipid Production For Biofuel Feedstock, Ian Woertz, A. Feffer, Tryg Lundquist, Yarrow Nelson

Civil and Environmental Engineering

Algae grown on wastewater media are a potential source of low-cost lipids for production of liquid biofuels. This study investigated lipid productivity and nutrient removal by green algae grown during treatment of dairy farm and municipal wastewaters supplemented with CO2. Dairy wastewater was treated outdoors in bench-scale batch cultures. The lipid content of the volatile solids peaked at Day 6, during exponential growth, and declined thereafter. Peak lipid content ranged from 14–29%, depending on wastewater concentration. Maximum lipid productivity also peaked at Day 6 of batch growth, with a volumetric productivity of 17 mg/day/L of reactor and an …

Go to article

Wood Chip Heating For Commercial Buildings In Ireland: An Analysis Of Supply Methods And Financial Viability, Ciaran Berkeley Nov 2009

Wood Chip Heating For Commercial Buildings In Ireland: An Analysis Of Supply Methods And Financial Viability, Ciaran Berkeley

Masters

Ireland has three central issues regarding the supply and use of fuel and energy: import dependency; competitiveness; and greenhouse gases emissions. Ireland is ranked as one of the most import dependent states in the EU, with over 90% of its fuel sourced fiom abroad [IAEA, 20051. Combined with rapidly fluctuating oil and gas wsts and uncertainty with future supply, it is essential that Ireland find a more secure and sustainable alternative to fossil hels. Wood chip represents one such alternative energy source since it is locally produced and considered to be carbon-neutral. The main objective of this research is to …

Go to article

Long-Term Changes In Aluminum Fractions Of Drainage Waters In Two Forest Catchments With Contrasting Lithology, Pavel Krám, Jakub Hruška, Charles T. Driscoll, Chris E. Johnson, Filip Oulehle Nov 2009

Long-Term Changes In Aluminum Fractions Of Drainage Waters In Two Forest Catchments With Contrasting Lithology, Pavel Krám, Jakub Hruška, Charles T. Driscoll, Chris E. Johnson, Filip Oulehle

Civil and Environmental Engineering - All Scholarship

Aluminum (Al) chemistry was studied in soils and waters of two catchments covered by spruce (Picea abies) monocultures in the Czech Republic that represent geochemical end-members of terrestrial and aquatic sensitivity to acidic deposition. The acid-sensitive Lysina catchment, underlain by granite, was compared to the acid-resistant Pluhův Bor catchment on serpentine. Organically-bound Al was the largest pool of reactive soil Al at both sites. Very high median total Al (Alt) concentrations (40 μmol L−1) and inorganic monomeric Al (Ali) concentrations (27 μmol L−1) were observed in acidic (pH 4.0) stream water at Lysina in …

Go to article

Use Of Ground Penetrating Radar For Construction Quality Assurance O Concrete Pavement, George Morcous, Ece Erdogmus Nov 2009

Use Of Ground Penetrating Radar For Construction Quality Assurance O Concrete Pavement, George Morcous, Ece Erdogmus

Nebraska Department of Transportation: Research Reports

No abstract provided.

Go to article

Nutrient And Bacterial Transport In Runoff From Soil And Pond Ash Amended Feedlot Surfaces, John E. Gilley, Jason R. Vogel, Elaine D. Berry, Roger Eigenberg, David B. Marx, Brian L. Woodbury Nov 2009

Nutrient And Bacterial Transport In Runoff From Soil And Pond Ash Amended Feedlot Surfaces, John E. Gilley, Jason R. Vogel, Elaine D. Berry, Roger Eigenberg, David B. Marx, Brian L. Woodbury

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The addition of pond ash (fly ash that has been placed in evaporative ponds and subsequently dewatered) to feedlot surfaces provides a healthier environment for livestock and economic advantages for the feedlot operator. However, the water quality effects of pond ash amended surfaces are not well understood. The objectives of this field investigation were to: (1) compare feedlot soil properties, and nutrient and bacterial transport in runoff, from pond ash amended surfaces and soil surfaces; (2) compare the effects of unconsolidated surface materials (USM) (loose manure pack) and consolidated subsurface materials (CSM) (compacted manure and underlying layers) on nutrient and …

Go to article

Contract Time Optimization Methodologies For Highway Construction Projects, Yi Jiang, Huaxin Chen Nov 2009

Contract Time Optimization Methodologies For Highway Construction Projects, Yi Jiang, Huaxin Chen

JTRP Technical Reports

This study was conducted to develop methodologies for appropriately determining the monetary values of I/D rates of highway construction projects in Indiana. In this study, a comprehensive literature review was performed to identify possible effective methodologies for work zone effects, construction impacts, and contract time optimization. The highway production rates were developed in a previous study. The production rates were validated and adjusted with the help from INDOT field engineers. The weighin- motion (WIM) collected traffic data were obtained, processed, and analyzed to provide input data for user cost calculations at highway work zones. Construction data were obtained and processed …

Go to article

Moisture Sensitivity Of Hot Mix Asphalt Mixtures In Nebraska -- Phase Ii, Ingryd Pinto, Hoki Ban, Yong-Rak Kim Nov 2009

Moisture Sensitivity Of Hot Mix Asphalt Mixtures In Nebraska -- Phase Ii, Ingryd Pinto, Hoki Ban, Yong-Rak Kim

Nebraska Department of Transportation: Research Reports

No abstract provided.

Go to article

First Prev Next Last