Civil and Environmental Engineering Commons^™

Rapid Response Protocol (Rrp) For Monitoring Water Quality Parameters For Wildfire Disturbance, Paige G. Tunby

Civil Engineering ETDs

The increase in wildfire frequency and intensity has been driven by the sensitivity of fire regimes to climate changes and fire suppression. Wildfires impact hydrological and environmental processes and ecosystem service due to the mobilization of wildfire debris by precipitation. Data on post-fire water quality dynamics have been measured in a few study cases from burned watersheds where sensors were deployed to monitor non-fire-related water quality issues. This has led to a dearth of data for understanding the effects of wildfire disturbances on fluvial networks. To close the gap in available water quality data, we have created a rapid response …

Experimental And Numerical Investigation Of 3d-Printed Viscoelastic Dampers, Mohammed Jaradat

Civil Engineering ETDs

Elastomeric materials are extensively used in energy dissipation applications to mitigate large lateral displacements and attenuate vibrations. One way of exploiting the capabilities of elastomeric materials is using shear-damping mechanisms such as viscoelastic damping devices (VEDs).

In this research the freedom of design offered by additive manufacturing technology is utilized to produce 3D printed elastomeric parts that act as the viscoelastic layer in an energy damping device. A mechanically interlocked viscoelastic damper (MIVED) with a jigsaw-like interlocking mechanism was designed and manufactured. MIVED is composed of a rigid and soft phase. It operates in two modes, modes I and II, …

Monitoring Of Structural Quality Under Construction Using 3d Point Cloud Data, Xinxing Yuan

Civil Engineering ETDs

Inspection of infrastructure under construction has become an active research topic in the past few decades. Due to rising costs and safety concerns of current inspection methods, automated inspection methods are proposed. In this context, this dissertation has developed a framework that uses 3D point cloud data from the bridge under construction and evaluates the design specifications and the strength capacity of the structure while is being built. This study presents a slicing algorithm for automatically evaluating rebar placement using 3D point cloud data. The outcomes of this research provide structural engineering with (i) automatic inspection of reinforcement during construction; …

Co-Occurrence Of Microplastics, Uranium And Arsenic In Heavy Metal-Contaminated Freshwaters And Their Potential Interaction, Jasmine Anne Quiambao

Civil Engineering ETDs

This study identified microplastics and heavy metals in fields sites of freshwater systems in New Mexico and evaluated the interactions of arsenic (As) and uranium (U) with commercial microplastics for acidic and neutral pH in laboratory-controlled conditions. The potential interaction of microplastics with other contaminants is not well-established. Microplastics could interact with heavy metals in ecosystems with naturally elevated background concentrations of metals or affected by anthropogenic activities. Previous studies have found heavy metal contamination in freshwater systems in New Mexico near abandoned mine sites. The objective of this study is (1) to identify and characterize microplastics from metal contaminated …

Soil Moisture Dependent Runoff In A Dryland Region: An Investigation Of The Role Of Antecedent Conditions, Monitoring, And Modeling Strategies, Gerhard Schoener

Civil Engineering ETDs

Approximately 30% of the Earth’s land surface is characterized as arid or semiarid, including much of the western United States. Accurate runoff predictions are important for informed watershed management, particularly in rapidly urbanizing areas. Infiltration excess overland flow is the dominant mechanism for runoff generation in many dryland basins, and event-based infiltration or loss models are commonly used to estimate runoff. However, predictions are associated with considerable uncertainty due to the role antecedent soil moisture, an initial condition that must be set by the modeler. The objectives of my research were to (1) evaluate the impact of antecedent soil moisture …

The Effect Of Ph On Organic Carbon Uptake And Biological Phosphorus Removal By Tetrasphaera Polyphosphate Accumulating Organisms, Derek Belka

Civil Engineering ETDs

Tetrasphaera polyphosphate accumulating organisms (PAOs) have been found in greater abundance and may remove more P in full-scale enhanced biological phosphorus removal (EBPR) water resource recovery facilities (WRRF) worldwide than the more extensively studied Accumulibacter PAO. Understanding the effect that environmental conditions, such as pH, have on Tetrasphaera metabolisms is critical to understanding EBPR WRRF process upsets, achieving consistent low effluent P concentrations, and formulating optimization strategies. The objective of this study was to determine pH effects over the range from 5.5 to 8.5 on anaerobic amino acid uptake, P release, and cation release in a Tetrasphaera-enriched culture from …

An Investigation Of Phosphorus Removal By Purple Bacteria In Dairy Wastewater Lagoons, Lauren M. Gomez, Andrew J. Schuler, Jose M. Cerrto, David T. Hanson

Civil Engineering ETDs

The objective of this study was to determine whether the polyphosphate metabolism in purple photosynthetic bacteria (PPB) is similar to that of wastewater polyphosphate-accumulating organisms (PAOs) such as Accumulibacter. Dairy lagoon samples were studied in continuous and batch laboratory tests to evaluate whether cyclic light and dark conditions for PPB are similar to aerobic and anaerobic conditions for PAOs in domestic wastewater treatment systems. 16s rRNA gene amplicon sequencing indicated the presence of the purple sulfur bacterium Thiolamprovum (53.92%) in one lagoon source, and Thiodictyon (3.50%) in a second lagoon. Phosphorus contents were at least 0.7% higher than the …

Cyber Physical Systems For Non-Contact Infrastructure Monitoring, Roya Nasimi

Civil Engineering ETDs

In recent decades, the decay of infrastructure has become a relevant challenge of both developed and under developing countries. Prioritization of maintenance and repairs of transportation infrastructure is a new worldwide priority since it is important to quantify the rate of decay of assets to increase both safety and cost-efficient operations. Infrastructure owners need frequent inspections on their assets to predict and to avoid unsafe conditions prone to cause disasters. Frequent infrastructure inspections call for cost-effective methods. Traditional measurement methods require human access to the infrastructure, are subjective, expensive, and unsafe. Therefore, infrastructure managers are interested in exploring new non-contact …

Measurement Of Resilience Performance For Infrastructure Construction Project Delivery, Fei Han

Civil Engineering ETDs

In the past decade, infrastructure resilience in the U.S. has become critical due to increasing disruptions to the built environment and the resultant consequences on economic, social, and environmental goals. This attention to resilience research is drawn to investigating the ability of existing structures and facilities to resist and recover from natural and human-caused hazards. From a broader view, resilience also applies to processes, such as infrastructure project delivery processes. During these processes, a project often suffers inevitable threats and disruptions, which can significantly delay or derail the project if the process is not resilient.

This research aimed to conceptualize …

3d Printed Concrete & Polymer Concrete For Infrastructure Applications, Daniel Heras Murcia

Civil Engineering ETDs

Additive manufacturing technology has been established as one of the fastest-growing building technologies worldwide. Three-dimensional concrete printing (3DCP) has developed an increasing interest in the last decade due to its prospects as a transformative technology for industries such as the concrete precast. Besides the improvements in automation technologies in construction, traditional construction has faced considerable challenges: high accident rates, labor dependency, significant potential for automation, and high costs associated with the use of traditional formwork. In this context, three-dimensional concrete, also referred to as physical prototyping, is a novel construction technique in which the concrete is extruded layer-to-layer. 3DCP is …

Characterization Of Foamed Warm-Mix Asphalt For Workability And Moisture Damage, Biswajit Kumar Bairgi

Civil Engineering ETDs

Warm mix asphalt (WMA) technology reduces the high mixing and compaction temperatures of conventional hot mix asphalt (HMA) by approximately 10 ^°C to 40 ^°C. In WMA technology, instead of increasing the binder-aggregate temperature, the volume of asphalt is increased by injecting water into hot asphalt at high air pressure. The amount of water injected in the binder is typically determined by a trial and error process and is termed as foaming water content (FWC). Once the FWC is in contact with the hot asphalt binder, it turns into vapor with a rapid volume expansion due …

Pseudo-Ductile 3d Printed Fiber Reinforced Polymer Composites, Shreya Vemuganti

Civil Engineering ETDs

The use of fiber-reinforced polymer (FRP) composite materials is continuously growing in civil infrastructure owing to its high strength, low weight, and manufacturing flexibility. However, FRP is characterized by sudden failure and lacks ductility. When used in construction, gradual failure of FRP components is desired to avoid catastrophic structural collapse. Due to its mechanical orthotropy, the behavior of FRP relies significantly on fiber orientation and stacking sequence. In this research proposal, investigations showed that novel multi-angled glass fiber reinforced polymer (GFRP) composites with varying fiber orientation angles, stacking sequence, and thickness of laminas can be designed and fabricated using 3D …

Effect Of Degradation Environment And Relative Humidity On Fracture Of Cement, Patience L. Raby

Civil Engineering ETDs

Concrete serves in all forms of humidity conditions (arid climates to submerged conditions) and can be exposed to many different forms of degradation. To better understand the effects that degradation and humidity have on concrete as a composite, the effects on cement alone must first be better understood. This research aims to examine the significance of degradation (calcium leaching or sulfate attack), in addition to relative humidity, on cracking and fracture behavior of cement. Flexure and fracture tests were performed on cement exposed to varying periods of each form of degradation as well as various humidities. Samples were exposed to …

Evaluation Of Fine And Coarse Graded Asphalt Mixes, Md Mehedi Hasan

Civil Engineering ETDs

During the last 20 years, asphalt pavements were built in New Mexico (NM) and around the country using mostly Superpave coarse graded mixes as opposed to fine graded mixes. This is because coarse mix uses larger aggregates with good interlocking and requires less asphalt binder than a fine mix, while both mixes fulfill the Superpave criteria. Recently, it was observed nationally that the Superpave coarse graded mixes have good field rutting performances but poor cracking performances. It is hypothesized that fine graded mix can help improve pavement cracking performances. The idea is, the fine mixes would have less air voids …

Monitoring Damage Occurrence, Post-Peak Crack Propagation And Air Permeability In Concrete Using The Brazilian Indirect Tension Test, Angel M. Padilla

Civil Engineering ETDs

This research aims to investigate the relationship between stress, damage, crack propagation, and permeability evolution in concrete. A novel experimental test method is presented that enables monitoring post-peak cracking behavior of concrete using the Brazilian tension test by slowing crack propagation while concurrently measuring permeability and monitoring damage propagation using acoustic emission techniques. The modified Brazilian test method utilizes spring supports in parallel to the test specimen to off-load the test specimen incrementally to slow down the post-peak crack propagation. A vacuum flow system is attached to the rear side of the concrete during loading to measure apparent air permeability …

Dynamic Hvac Energy Management Using Commercial Building Occupancy Metrics & Neural Networks, Krishna Chaitanya Jagadeesh Simma

Civil Engineering ETDs

With the rise of technology use in buildings, it is now possible to collect data that can be used to improve building energy consumption. One factor that has significant impact on building energy consumption is occupancy. Recent studies have shown promising results in obtaining occupancy information from existing infrastructure such as WiFi router networks. However, these existing frameworks require additional investments through software upgrades, added infrastructure, computational resources, and may raise occupant privacy concerns. Additionally, with occupant thermal comfort statistics being lower than ASHAREA specified standards, a novel approach for indoor climate control is needed. To address the limitations in …

Exploring The Relationship Between Vehicular Emissions And Traffic Operations At Isolated Signalized Intersections, Abiral Dulal

Civil Engineering ETDs

Most roadway transportation modes still run on petroleum fuels. Petroleum fuels are major sources of air pollutants, including hydrocarbons (HC), carbon monoxide (CO), carbon dioxide (CO₂), nitrogen oxides (NO and NO₂, which are together called NOx), Volatile Organic Compounds (VOCs), and particulate matter of size(PM10) and2 and BC). Mitigating pollution is a serious issue, and therefore, it is the engineers' and planners' responsibility to study and reduce emissions as much as possible. Emission levels are generally high at street intersections, which are places where vehicles tend to accelerate, decelerate, and idle. Emission levels at intersections are …

A Practical Methodology To Detect, Quantify And Characterize Experimental Uncertainties In The Dynamic Testing Of Structures, James L. Woodall

Civil Engineering ETDs

This thesis investigates the uncertainty in the experimental context of structural dynamics. This thesis proposes a method to estimate both the effect of boundary conditions, as well as two different methods to detect the location of sensors on a specimen. Firstly, this thesis proposes a technique to predict the dynamic behavior of any point along a cantilever beam with an uncertain transverse elastic restraint. Secondly, this thesis investigates the estimation of the location of a sensor given the output data of a physical experiment with two different methods. Small errors in the sensor location may go unnoticed in the frequency …

Development Of A Low-Cost Efficient Wireless Intelligent Sensor For Strain (Lewis-S) And Applications In Measuring Nonlinear Dynamics, Eric Robbins

Civil Engineering ETDs

Nonlinearities exist in all real-life systems and can be caused by behaviors such as large deformations, yielding, contact, etc. which can result in phenomena not found in linear testing. Considering nonlinear behavior in dynamic analyses can be beneficial to increase model predictability and can accurately characterize system responses. Generally, accelerometers are commonly used in linear and nonlinear vibration testing to obtain the acceleration response of a system. However, some systems may render the use of accelerometers problematic, or accelerometers may introduce limitations to measurement capabilities such that it can be beneficial to obtain experimental data using different sensors. In the …

Nighttime Pedestrian Fatalities Across The United States And Their Relationship With Built Environment And Socioeconomic Factors: Gis-Based Analysis And Assessment, Amir Tarighi

Civil Engineering ETDs

Fatalities from motor vehicle collisions are the fifth leading cause of years of lost life worldwide (Foreman et al., 2018) and are a great concern for all communities. This road safety crisis has been especially pronounced for U.S. pedestrians over the last decade. National records show that between 2010 and 2019, pedestrian fatalities in the U.S. increased 44% while all other traffic fatalities increased only 4% and more than fifty percent of pedestrian fatalities occurred in dark lighting conditions. This study analyzed the relationship between pedestrian fatality locations at night and five demographic characteristics of those locations including population density, …

Strength, Fracture Evolution, And Permeability Changes From Confined Brazilian Tests On Sandstone, Tyler Louis Hagengruber

Civil Engineering ETDs

This research reports on confined Brazilian strength tests and concurrent permeability testing on sandstone. The majority of the tests measured permeability during loading to failure in the confined extension region. Additional testing includes unloading and reloading cycles to detect the development of microcracks and the dependence of permeability on mixed stress conditions. Further testing characterizes fracture networks by observing porosity changes due to microcrack interactions before peak load. All tests involve 5 cm diameter disk-shaped, jacketed samples that are subjected to confining stresses while they are diametrically loaded. Specially designed end caps allow for gas flow measurements. The test configuration …

Visualization Of Real-Time Displacement Time History Superimposed With Dynamic Experiments Using Wireless Smart Sensors And Augmented Reality, Marlon Frank Agüero Injante

Civil Engineering ETDs

Wireless Smart Sensor (WSS) process field data and inform structural field engineers and owners about the infrastructure health, condition, and safety. Engineers acquire the data and investigate changes on displacements under loads to make informed choices and prioritize decisions concerning maintenance, required repairs, and infrastructure replacements. However, reliable data collection and access to displacement information in the field in real-time under loads remains a challenge. The displacement data provided by the WSS in the field undergoes additional processing, and it is seen at a different location, at the decision-making headquarters. If inspectors were able to observe structural displacements in real-time …

Chemical Interfacial Reactions Affecting The Speciation And Solubility Of Uranium In Organic-Rich Environments, Carmen A. Velasco

Civil Engineering ETDs

The aim of this dissertation was to investigate the interfacial reactions between uranium (U) and natural organic matter NOM) affecting the solubility, adsorption, and precipitation of U in organic-rich environments. The chemical interactions between U and NOM are not well understood, which justified the following research objectives: 1) Identify the effect of pH on U speciation and the organic functional chemistry in mineralized deposits from the Jackpile Mine.; 2) Identify the precipitation of U(VI) and NOM as a function of pH (2, 4 and 7); 3) Identify changes in DOM chemistry due to the reaction of NOM and U at …

Evaluating Public Transit Accessibility In Albuquerque, New Mexico: A Fixed-Route Bus Service Analysis, Risa E. Gutierrez

Civil Engineering ETDs

This research analyzed how residential accessibility to fixed-route bus service in Albuquerque, New Mexico varies by distance, income level, and headway. A literature review investigated components of travel that might deter people from using public transit such as travel distance, sidewalk condition or availability, bus headway, lack of active travel in today’s society, personal and traffic safety, and access equity. Geographic Information System (GIS) mapping was used to determine if low-income neighborhoods have better or worse access to ABQ Ride bus stops relative to medium- or high-income neighborhoods. Residential land use was divided into three economic classes based on 2018 …

Thermal Mapping And Evaporation Estimation Of Cochiti Lake Using Landsat 8 Imagery, Claudia Jimenez Arellano

Civil Engineering ETDs

Satellite remote sensing (RS) techniques have revolutionized the study of spatial and temporal processes in environmental science and water resources engineering. This study was focused on advancing the understanding of RS techniques to provide estimates of spatial variability of surface water temperature and corresponding evaporation rates for open water.

Evaporation plays a crucial role in water budgets, which is critical knowledge for water management, especially in arid environments. However, there are few methods to estimate its spatial variability, which is relevant because water does not evaporate equally everywhere on a large waterbody. Hence, we cannot assume the calculations of evaporations …

Effect Of Membrane Aging And Operating Conditions On The Rejection Of Trace Organics For Potable Reuse, Jose Pedro Hernandez

Civil Engineering ETDs

The aim of this study is to provide a better understanding of the effect that membrane degradation and operating conditions have on the removal of selected organic compounds via reverse osmosis (RO). Originally, the study included laboratory experiments in which ESPA2-LD membranes from Hydranautics were to be chemically damaged and the passage of the suite of trace organics through the membranes was to be evaluated. Unfortunately, the degradation experiments were cut short due to lab closures associated with the COVID-19 pandemic. The study then changed direction to provide insight into the role operating conditions have on the removal of trace …

Introducing The Self-Cleaning Filtration For Water Quality Sensors (Sc-Flawless) System, Aashish Sanjay Khandelwal

Civil Engineering ETDs

Sensor-based, semi-continuous observations of water quality parameters have become critical to understanding how changes in land use, management, and rainfall-runoff processes impact water quality at diurnal to multi-decadal scales. While some commercially available water quality sensors function adequately under a range of turbidity conditions, other instruments, including those used to measure nutrient concentrations, cease to function in high turbidity waters (> 100 NTU) commonly found in large rivers, arid-land rivers, and coastal areas. This is particularly true during storm events, when increases in turbidity are often concurrent with increases in nutrient transport. Here, we present the development and validation of …

Relating Asphalt Concrete’S Pore Structure To Its Durability, Mohiuddin Ahmad

Civil Engineering ETDs

Most of the pavements in the USA are constructed using asphalt concrete (AC). AC changes its property over time due to moisture intrusion and aging. These two factors deteriorate AC significantly, and they are considered as the most important durability measures of AC. Moisture enters a pavement in both liquid and vapor form through the permeable pores that are interconnected. Similarly, oxygen, which is required for the aging process, access an asphalt concrete pavement through the connected pore. However, none of the previous studies correlated AC’s pore structure to the flow of moisture, moisture damage, and aging. In this study, …

Biogeochemical Processes Affecting Arsenic (As) Release And Bioavailability Near Abandoned Mine Wastes, Cherie L. Devore

Civil Engineering ETDs

The aim of this dissertation was to investigate the biogeochemical processes affecting the mobilization and bioavailability of arsenic (As) from mining-impacted sediments to surface water sources and plants. The Cheyenne River Watershed has been affected by mining legacy for several decades. The biogeochemical cycling of As on tribal land is not well understood, which justified the following research objectives: 1) Investigate the effect of competing anions on the release of As from sediments exposed to oxidizing conditions; 2) Evaluate chemical and microbiological processes affecting the release of soluble As, Fe, and Mn from contaminated sediments under laboratory controlled aerobic and …

Post-Wildfire Geomorphic Stream Response In Six New Mexican Watersheds, Aljaz Praznik

Civil Engineering ETDs

Wildfire causes severe physical changes to watersheds, which then leads to geomorphic changes in the burned watersheds. In New Mexico and the southwestern U.S., flooding is a common response after a wildfire, due to higher water runoff from the hillslopes and sediment erosion rates. These flood events change the erosion and deposition characteristics of a stream, which can result in the deposition of a large amount of sediment near the communities living downstream. The objective of this research was to analyze and compare post-fire geomorphic stream response caused by six different wildfires in New Mexico with the goal to create …