Civil and Environmental Engineering Commons^™

Bs News July/August

Building Services Engineering

No abstract provided.

Cereal Grain Combustion In Domestic Boilers, Andrew Keppel, John Finnan, Bernard Rice, Philip Owende, Kevin Macdonnell

Articles

This study compared the combustion characteristics and the combustion behaviour of oats, barley, triticale and wheat to that of wood pellets. Sustained grain combustion in domestic boilers was feasible but problematic, the main impediment being clinker formation with ash agglomeration. Clinker formation was lowest for oats which burned easily with fewer operational problems. Triticale displayed reasonably good combustion characteristics and also ignited easily. In contrast, barley and wheat proved difficult to ignite while barley combustion was prone to self-extinguish. Thermal and combustion efficiency and heat output were considerably higher at a grain moisture content of 15% compared to a moisture …

Environmental Consequences Of A Power Plant Shut-Down: A Three-Dimensional Water Quality Model Of Dublin Bay, Zeinab Bedri, Michael Bruen, Aodh Dowley, Barthelomew Masterson

Articles

A hydro-environmental model is used to investigate the effect of cessation of thermal discharges from a power plant on the bathing water quality of Dublin Bay. Before closing down, cooling water from the plant was mixed with sewage effluent prior to its discharge, creating a warmer, less-saline buoyant pollutant plume that adversely affects the water quality of Dublin Bay. The model, calibrated to data from the period prior to the power-plant shut-down (Scenario 1), assessed the water quality following its shut-down under two scenarios; (i) Scenario 2: continued abstraction of water to dilute sewage effluents before discharge, and (ii) Scenario …

Bathing Water Quality Prediction Using An Integrated Catchment And 3-D Coastal Hydrodynamic Model, John O'Sullivan, Zeinab Bedri, Aisling Corkery, Louise Deering, Katalin Demeter, Wim Meijer, Barthelomew Masterson, Gregory O'Hare

Conference papers

Under the new European Union Bathing Water Directive (2006/7/EC) which comes into force in 2014, more stringent bathing water quality standards, defined in terms of Escherichia coli (E.coli) and Intestinal Enterococci (I.E.), will apply in Irish bathing waters. Compliance with these standards is ensured through a structured water quality monitoring programme that is published by Authorities with responsibility for bathing water areas in advance of each bathing season. The directive recognises that elevated levels of faecal coliform bacteria in bathing areas can derive from the overland transport of waste from livestock in the rural fraction of river catchments. On days …

The Effect Of Truck Permitting Policy On Us Bridge Loading, Eugene J. Obrien, Bernard Enright, Cathal Leahy

Conference papers

No abstract provided.

Reliability-Based Bridge Assessment Using Enhanced Monte Carlo To Simulate Extreme Traffic Loading, Bernard Enright, Donya Hajializadeh, Eugene J. Obrien

Conference papers

A framework is presented for the assessment of the safety of a bridge deck under actual traffic loading using an enhanced Monte Carlo method which attempts to reduce computational cost while preserving the advantages of more conventional, computationally intensive, simulation. To generate the bridge loading scenarios, an extensive Weigh-in-Motion (WIM) database is used to calibrate a sophisticated simulation model of two-directional traffic. Traffic and vehicle characteristics are generated from statistical distributions derived from measured traffic data. Two examples are used in this study to assess the usefulness and accuracy of the enhanced method. In the first, a simple example is …

Bs News May/June

Building Services Engineering

No abstract provided.

Rainwater Harvesting - A Zero Waste Approach To Water, Liam Mccarton, Sean O'Hogain

Other Resources

This keynote presentation explores the concept of a zero waste approach to water supply. This is a precursor to the circular economy of water.

The Application Of Cobie To Increase The Functionality Of Existing Software, Barry Mcauley, Alan V. Hore, Mark Mccormack

Conference papers

Building Information Modelling (BIM) can provide a focus on collaboration between the designers, constructors and facility management (FM) personnel leading to major efficiencies in the operational and maintenance phase of a building. The information within a model can be extracted at various stages throughout the project life cycle using the Construction-Operation Building Information Exchange (COBie) schema that provides an open framework for the exchange and delivery of construction handover information. However, it is then up to the FM software companies to take the information and display it in a user friendly way. The authors have set about enhancing an established …

Estimating The Wind Resource In An Urban Area: A Case Study Of Micro Wind Generation Potential In Dublin, Ireland, Keith Sunderland, Gerald Mills, Michael Conlon

Articles

The micro-turbine wind market in cities faces significant challenges due to the complexities associated with the urban terrain but, if a renewable solution to increasing energy demand is to be achieved, energy conversion systems where populations are concentrated, that is cities, must be considered. This research evaluates the urban wind resource by employing a physically-based empirical model to link wind observations at a conventional meteorological site to those acquired at urban sites. The approach is based on urban climate research that has examined the effects of varying surface roughness on the wind-field between and above buildings. Here, this is applied …

Thermal Performance Analysis Of A Solar Water Heating System With Heat Pipe Evacuated Tube Collector Using Data From A Field Trial, Lacour Ayompe, Aidan Duffy

Articles

This paper presents an analysis of the thermal performance of a solar water heating system with heat pipe evacuated tube collector using data obtained from a field trial installation over a year in Dublin, Ireland. An automated sub‐system was developed and incorporated to control the hot water draw‐offs and electric immersion heater to mimic the operation of solar water heating systems in domestic dwellings. The maximum recorded collector outlet fluid temperature was 70.3^oC while the water temperature at the bottom of the hot water tank was 59.5^oC. The annual average daily energy collected was 20.4 MJd …

The Effects Of Physical Activity On Greenhouse Gas Emissions For Common Transport Modes In European Countries, Aidan Duffy, Robert Crawford

Articles

This paper applies a life cycle methodology to estimate activity-related contributions of transport modes to GHG emissions. The methodology uses national input-output tables, environmental accounts, household budget data and nutritional data to derive food-sector GHG coefficients of consumption for ten European countries. The food energy requirements for each mode of transport are estimated taking account of the modal activity level and energy requirements. Walking, cycling, driving and bus travel are considered. Typical national food energy-related emissions for walking, cycling, and driving ranged from 25.6 - 77.3 gCO2-eq/pass.km, 10.4 - 31.4 gCO2-eq/pass.km and 1.7 - 5.2 gCO2-eq/pass.km; passenger transport was found …

Design Of A Transpired Air Heating Solar Collector With An Inverted Perforated Absorber And Asymmetric Compound Parabolic Concentrator., Nasif Shams

Doctoral

absorber and an asymmetric compound parabolic concentrator was applied to increase the intensity of solar radiation incident on the perforated absorber. A 2D ray tracing model quantified optical efficiency at different incident angles within 27o to 89o incident angles. The beam efficiency was found to vary between 72% and 79% and diffuse efficiency was found to vary between 48.2% and 65%. The average thermal efficiency was found to be approximately 55%-65% with average radiation above 400 W/m2 for flow rates in the range of 0.03 kg/s/m2 to 0.09 kg/s/m2. Experimental results at air flow rates of 0.03 kg/s/m2 and 0.09 …

Bs News March/April

Building Services Engineering

No abstract provided.

Transient And Quasi-Steady Thermal Behaviour Of A Building Envelope Due To Retrofitted Cavity Wall And Ceiling Insulation, Aimee Byrne, Gerard Byrne, Anna Davies, Anthony Robinson

Articles

Accurate understanding of the thermal behaviour of building components is essential for predicting heat-ing or cooling needs and facilitates the implementation of more successful energy saving strategies and retrofits. This paper focuses on a specific measure commonly introduced through the residential energy efficiency retrofit programmes in Ireland–insulation. Traditionally, assessments of the performance of building envelopes have been based on assumed thermal resistances of the materials involved, labora-tory tests and computer modelling. The aim of the present work is to investigate the in situ thermal behaviour of a case study building and its components under transient and quasi-steady environmental conditions, comparing …

Using Model Building In Structural Engineering To Enhance Understanding Of Construction Principles And Methods, Niall Holmes, Henry Mullen

Articles

This paper presents a new model building exercise in a second year module in the Department of Civil & Structural Engineering in the Dublin Institute of Technology (DIT). The activity aimed to improve students’ understanding of structural engineering, construction principles and methods. It allowed students to practically apply lecture material and construct a scaled model giving them an opportunity to study and visualise a real structure and generate their own ideas on how it should be assembled within a constructivist active learning environment. As a result, lectures were found to be more interactive and students more engaged in the discussions …

Development And Implementation Of A Simplified Residential Energy Asset Rating Model, Daire Reilly, Aidan Duffy, David Willis, Michael Conlon

Other resources

In accordance with national and European policies, the provision of financial assistance to residential energy consumers has led to a greater awareness of and interest in energy retrofit technologies. However, at present Irish energy consumers have no appropriate advice on the future performance of retrofit options available to them. This is a significant limitation to decision making and technology uptake, since this group need to know whether their investment is likely to be worthwhile.

The asset rating methodology developed for the certification of energy performance of buildings is the current industry standard of prediction of energy demand and post retrofit …

Designing A Framework For Exchanging Partial Sets Of Bim Information On A Cloud-Based Service, Alan Redmond

Doctoral

The rationale behind this research study was based on the recognised difficulty of exchanging data at element or object level due to the inefficiencies of compatible hardware and software. Interoperability depicts the need to pass data between applications, allowing multiple types of experts and applications to contribute to the work at hand. The only way that software file exchanges between two applications can produce consistent data and change management results for large projects is through a building model repository. The overall aim of this thesis was to design and develop an integrated process that would advance key decisions at an …

Chapter Green Nanotechnology: Development Of Nanomaterials For Environmental And Energy Applications, Rachel Fagan, Changseok Han, Joel Andersen, Suresh Pillai, Polycarpos Falaras, Anthony Byrne, Patrick S.M. Dunlop, Hyeok Choi, Wenjun Jiang, Kevin O’Shea, Dionysios D. Dionysiou

Books/Book Chapters

This book chapter discusses the syntheses of various nanomaterials, for green nanotechnology applications in detail. Special attention is given to the development of emerging areas, such as environmental as well as energy materials. Various approaches for preparing nanostructured photocatalysts, such as titanium dioxide, zinc oxide, iron oxide, and metal sulfides, different conventional methods and novel methods, including sol-gel methods, hydrothermal methods, microwave-assisted methods and sonochemical methods are introduced. The use of nanomaterials as photocatalysts, supporting materials for solar cells, and disinfectants is reported for environmental remediation and energy applications. Advanced applications of nanomaterials for water detoxification, air purification, and the …

Regional Integration Of Renewable Energy Systems In Ireland: The Role Of Hybrid Energy Systems For Small Communities, Craig Goodbody, Eileen Walsh, Kevin Mcdonnell, Philip Owende

Articles

Due to a lack of indigenous fossil energy resources, Ireland’s energy supply constantly teeters on the brink of political, geopolitical, and geographical unease. The potential risk to the security of the energy supply combined with the contribution of anthropogenic greenhouse gas emissions to climate change gives a clear indication of Ireland's need to reduce dependency on imported fossil fuels as primary energy source. A feasibility analysis to investigate the available renewable energy options was conducted using HOMER software. The Net Present Cost, the Cost of Energy, and the CO2 emissions of each potential energy combination were considered in determining the …

Using Weigh-In-Motion Data To Determine Aggressiveness Of Traffic For Bridge Loading, Eugene J. Obrien, Bernard Enright

Articles

This paper presents results based on the analysis of an extensive database of weigh-in-motion (WIM) data collected at five European highway sites in recent years. The data are used as the basis for a Monte Carlo simulation of bridge loading by two lane traffic, both bidirectional and same-direction. Long runs of the simulation model are used to calculate characteristic bridge load effects (bending moments and shear forces), and these characteristic values are compared with design values for bridges of different length as specified by the Eurocode for bridge traffic loading. Various indicators are tested as possible bases for a “Bridge …

Microsimulation Evaluation Of Eurocode Load Model For American Long-Span Bridges, Bernard Enright, Colm Carey, Colin Caprani

Articles

The ability to accurately predict traffic loading is essential for cost-effective bridge maintenance and repair programs. The traffic load model currently used in the United States for the design of long-span bridges was developed over three decades ago. In the meantime vehicle characteristics and traffic patterns have changed. The Eurocode for traffic loading is more recent, but was calibrated only for bridges up to 200 m long. In this work, Weigh-In-Motion traffic records from 11 different sites across Alabama are used to establish congested traffic loading. Traffic microsimulation is used to generate the congestion, based on the real traffic data. …

Derivation Of A Fuzzy National Phosphorus Export Model Using 84 Irish Catchments, Ahmed Nasr, Michael Bruen

Articles

Implementation of appropriate management strategies to mitigate diffuse phosphorus (P) pollution at the catchment scale is vitally important for the sustainable development of water resources in Ireland. An important element in the process of implementing such strategies is the prediction of their impacts on P concentrations in a catchment using a reliable mathematical model. In this study, a state-of-the-art adaptive neuro-fuzzy inference system (ANFIS) has been used to develop a new national P model capable of estimating average annual ortho-P concentrations at un-gauged catchments. Data from 84 catchments dominated by diffuse P pollution were used in developing and testing the …

Identifying High And Low Walkable Neighbourhoods Using Multi-Disciplinary Walkability Criteria, Lorraine Fitzsimons D'Arcy, Kevin M. Leyden, Catherine Woods

Conference papers

Neighbourhood features contributing to the walkability (pedestrian friendliness) of a neighbourhood are diverse and depend on both its physical and social attributes. Earlier work in the Cleaner, Greener, Leaner (CGL) Study identified differences in opinion between professional stakeholder groups (planners, designers, engineers, public representatives, and public health and advocacy professionals) on what constitutes a walkable environment [1]. This diversity has implications for neighbourhood design and planning policy. The findings of a multi-disciplinary focus group study were used to generate a list of walkability criteria to select areas for a population study. In this study twenty areas were shortlisted and grouped …

Futures Methodology As An Analysis And Planning Tool Within The Commercial Real Estate Industry, An Interpretative Study, Dominika Brodowicz

Doctoral

Currently, the majority of methods used in the commercial real estate analysis and planning processes have retrospective and quantitative roots and are based on historic data and trend extrapolation. This approach is based on the assumption that the relationships among key commercial property market variables and trends are constant and develop in a predictable manner into the future. Meanwhile, contemporary real estate companies, which are the subject of this study, are faced with rapid change, often of a discontinuous nature, in their external and internal environments. Furthermore, some of the challenges facing this industry, like social sustainability and a shift …

Bs News January/February

Building Services Engineering

No abstract provided.

Addressing The Need To Reform Construction Public Procurement In Ireland Through The Implementation Of Building Information Modelling, Barry Mcauley, Alan Hore, Roger West, Dermot Kehily

Conference papers

The Irish AEC Sector is facing one of its most uncertain and challenging periods and will see major cuts in all areas of the economy in 2012. Despite this the Irish Government has announced a number of large capital expenditure investments which have resultantly become a lifeline to a struggling construction industry. In order to compete within the public works sector AEC businesses must operate within the Governments Capital Works Management Framework. The objectives of the framework include achieving cost certainty, value for money and more effective delivery and appropriate risk sharing. The framework remains an area of contention and …

Knowledge Development Through Reflective Practice, Dermot Kehily

Conference papers

This paper examines the development of knowledge through reflective practice and more specifically the development of the author’s knowledge as a result of engaging in reflection on an issue in the field of the author’s research interest. The author commences by consulting and analysing existing published research on reflective practice. The paper sets out the theory of reflective practice as documented by eminent authors in the field. The author addresses the concept of action learning and frames this process within Kolb’s (1976) experiential learning model, in an attempt to formulate a framework whereby his own research focus can be developed. …

Real-Time Prediction System Of Bathing Water Quality At Bray, Co. Wicklow, Ireland, Zeinab Bedri, John O'Sullivan, Aisling Corkery, Louise Deering, Katalin Demeter, Wim Meijer, Gregory O'Hare, Bartholomew Masterson

Conference papers

Variations in water quality at recreational bathing beaches can have significant impacts with respect to compliance with related water quality standards, such as Directive 76/160/EEC. The “Blue Flag” award which bases its water quality standards upon the guideline E.coli levels of Directive 76/160/EEC, has become the measure of recreational value of bathing areas. Loss of such designations can have significant impacts with respect to local tourist economies. A revised Bathing Water Directive (Directive 2006/7/EC) came into force in 2006 and will supersede the existing 1976 Directive with effect from December 2014.

The revised Directive gives stronger focus on the protection …

The Characterisation And Numerical Modelling Of Viscoelastic Polyurethane Foams For Use In Custom Wheelchair Seating., Conor Briody

Doctoral

Viscoelastic polyurethane foam is widely used in wheelchair cushions as it offers good pressure relieving capabilities. However, the behaviour of this material is largely un-quantified, by comparison with conventional elastomeric materials. Consequently, in many cases, inadequate cushioning is provided to wheelchair users with complex seating requirements. This thesis characterises and numerically models viscoelastic polyurethane foam. Temperature-dependent static compression and simple shear test procedures are conducted on a range of viscoelastic polyurethane foams and selected results are utilised to identify Ogden Hyperfoam material model parameters. Time-dependent creep and stress relaxation test procedures are conducted and test results are used in conjunction …