Civil and Environmental Engineering Commons^™

The Acquisition Of Knowledge And Expertise In Construction: Understanding Construction Professionals, Lloyd Scott, Sittimont Kanjanabootra

Conference papers

Education programs these days especially in Construction Management have been designed and updated to response to market and stakeholder needs. However, there still exists a need for educators to understand how construction practitioners develop their expertise. Understanding the development of expertise is essential for providers of university education and training to enable them to develop programs to establish on which new professionals can better develop their appropriate expertise. This paper builds on earlier research and further explores how expertise develops in construction professionals. It also explores the similarities and differences in development of that expertise in construction practitioners from the …

Vegetation Mapping Of A Coastal Dune Complex Using Multispectral Imagery Acquired From An Unmanned Aerial System, C. Suo, Eugene Mcgovern, Alan Gilmer

Conference Papers

Vegetation mapping, identifying the distribution of plant species, is important for analysing vegetation dynamics, quantifying spatial patterns of vegetation evolution, analysing the effects of environment changes on vegetation, and predicting spatial patterns of species diversity. Such analysis can contribute to the development of targeted land management actions that maintain biodiversity and ecological functions. This paper represents a methodology for 3D vegetation mapping of a coastal dune complex using a multispectral camera mounted on an Unmanned Aerial System (UAS) with particular reference to the Buckroney dune complex in Co. Wicklow, Ireland. UAS, also known as Unmanned Aerial Vehicles (UAV’s) or drones, …

A Pseudo-Microsimulation Approach For Modelling Congested Traffic Loading On Long-Span Bridges, Colm Carey, Colin Caprani, Bernard Enright

Articles

This paper investigates congested traffic loading on long-span bridges through the use of traffic microsimulation. Six months of Weigh-In-Motion free-flow traffic data (including cars) are used as input for the microsimulation of congested traffic. Key parameters that affect traffic loading are identified in the output of the microsimulation, and these parameters form the basis for a more computationally efficient ‘pseudo-microsimulation of congested traffic’ (PMCT) model. This PMCT model is shown to replicate the traffic loading from full microsimulation accurately and allows long-run simulations, equivalent to 1000 years of congested traffic, to be performed with an acceptably short duration. This reduces …

Calcium Alginate Capsules Encapsulating Rejuvenator As Healing System For Asphalt Mastic, S. Xu, Amir Tabakovic, X. Liu, E. Schlangen

Research and Innovation - Articles

Researchers have demonstrated that the rejuvenator encapsulation method is a promising autonomic self-healing approach for asphalt pavements, where by the self-healing system improves the healing capacity of an asphalt pavement mix. However, potentially high environmental risk via leaching of hazardous chemicals such as melamine formaldehyde renders the technology unsuitable for widespread use in road design. This paper explores the potential for the use of more environmentally friendly and economically viable rejuvenator encapsulation method, where the calcium alginate is used as rejuvenator encapsulation material. The capsule morphology and microstructure were studied using the Microscopy and X-ray tomography. Capsules thermal and mechanical …

Surface Water Flooding, Groundwater Contamination, And Enteric Disease In Developed Countries: A Scoping Review Of Connections And Consequences, L. Andrade, J. O'Dwyer, E. O'Neill, Paul Hynds

Articles

Significant volumes of research over the past four decades has sought to elucidate the social, infrastructural, economic, and human health effects of climate change induced surface flooding. To date, epidemiological and public health studies of flooding events have focused on mental health effects, vector-borne diseases, and infectious enteric disease due to floodwater contact (i.e. typically low consumption rates). The inherent nature of groundwater (i.e. out of sight, out of mind) and the widely held belief that aquifers represent a pristine source of drinking water due to natural attenuation may represent the “perfect storm” causing direct consumption of relatively large volumes …

Quantity Surveying Professional Apprenticeships: A Paragon For The Supply Of Talent In The Irish Construction Industry, Eoghan Ó Murchadha, Roisin Murphy

Conference papers

The construction industry in Ireland has undergone considerable change in the last decade, the effect of which has resulted in a legacy malfunction in the construction labour market. The recent construction downturn led to high levels of construction unemployment, resulting in the mass emigration of construction professionals. Additionally, perceptions of job uncertainty in construction deterred new entrants into construction-related training and education programmes such as Quantity Surveying. If a skills gap is allowed to prevail, then there is a tangible threat to the industry’s cost competitiveness. As such, value for money becomes merely theoretical, and the cost to the economy …

The Impact Of Brexit On Cross-Border Trade By The Construction Sector In Ireland: An Exploratory Study, Tara Brooks, Duga Ewuga, Lloyd Scott, John Spillane

Conference papers

Cross-border co-operation can foster learning and contribute positively to business performance and social cohesion. This paper considers construction firms' economic motivation for co-operation around the Ireland - Northern Ireland border. This area, while impacted by the Brexit uncertainty, shares many of the economic and developmental characteristics of border areas throughout Europe. The purpose of the study is to investigate the impact of Brexit on cross border trade by the construction sector in Ireland and investigate the current tensions and barriers to that sector. A qualitative methodology adopted a literature review and semi-structured interview strategy. Data was collected from purposively selected …

Trades And Apprenticeships Skills Survey: The Employers Perspective, Eoghan Ó Murchadha, Roisin Murphy

Reports

The construction sector in Ireland has gone through a period of extremes in the last decade, from an exceptionally high growth to deep and prolonged recession. The backdrop to this report, however, is one of favourable economic and industry conditions. Economic growth is positive, exchequer balances are improving, unemployment continues to decline and sentiment within the construction industry is strong across most sub-sectors.

The construction labour market however, remains in a state of disequilibrium. The severe recession had devastating consequences on construction firms in Ireland resulting in company closures, redundancy and mass emigration. At the same time the number of …

Bs News January/February

Building Services Engineering

No abstract provided.

Absorption Coefficient Dependent Non-Linear Properties Of Thin Film Luminescent Solar Concentrators, S. Chandra, M. Rafiee, John Doran, S. J. Mccormack

Articles

This research article studied absorption coefficient dependent losses and efficiency of thin film luminescent solar concentrator (LSC). The optimum absorption coefficient was determined by fabricating red dye doped thin film LSCs with varying absorption coefficients of 24–202 cm-1. The optical, electrical, and ray-trace model predicted results were compared to establish the optimum absorption coefficient for fabricated thin film LSCs. The optical and electrical efficiencies of thin film LSCs are a function of absorption coefficient; follow linearly at lower values, gradually becoming non- linear at higher values of absorption coefficient which restricts the overall efficiency. The multi layered ray–trace model predicted …

Reliability-Based Designs Procedure Of Earth Retaining Walls In Geotechnical Engineering, Juan Camilo Viviescas, Juan Pablo Osorio, Julio E. Canon

Articles

The design and construction of foundations, retaining structures and slopes are usually based on deterministic formulations that do not allow the distinction between the natural variability and the inherent dispersion in the geotechnical parameters. Due to the inherent variability of the soil properties, there is a growing trend to implement reliability-based designs in geotechnical engineering to reduce design uncertainties by probabilistic methods. The reliability designs require the definition of the probability density functions of the geotechnical properties, as well as knowledge of the spatial variability of soils. This paper identifies the procedures, type of soil investigations, simulations and the most …

Stewardship Of International Bim Programmes: Lessons For Ireland, Barry Mcauley, Alan Hore, Roger West, Shiyao Kuang

Conference papers

The support by central government of national Building Information Modelling (BIM) programmes is common throughout the developed world today. To further understand how the different international governments have supported their BIM programmes the BIM Innovation Capability Programme (BICP) research team in Ireland recently completed a comprehensive Global BIM Study to help inform the National BIM Council (NBC) of Ireland in developing a Roadmap to Digital Transition for Ireland’s Construction Sector. This paper details the findings of a more concentrated investigation on a selection of jurisdictions on how particular international BIM programmes are orgainsed, managed and the level of governmental support …

Level 1 Before Level 2 – The Irish Bim Mandate, Robert Moore

Conference papers

Government Contracts Committee for Construction (GCCC) has prepared a position paper titled ‘A Public Sector BIM Adoption Strategy’, which outlines the context and rationale for the adoption of BIM and puts forward a proposed timeline for adoption, the purpose of this position paper is to invite a response from industry [1]. This paper analyses the position paper on the subject of the implementation of the proposed mandate. The author defines what is implied by UK BIM Levels 0, 1, 2 and 3, and collates the responses from industry to the position paper regarding the implementation plan. This position paper is …

Ireland’S Bim Macro Adoption Study: Establishing Ireland’S Bim Maturity, Barry Mcauley, Alan Hore, Roger West, Mohamad Kassem, Shiyao Kuang

Conference papers

Since 2016 the BIM Innovation Capability Programme (BICP) has captured the capability of the Irish Construction Industry’s and the Higher Education Institutes’ (HEIs) response to the increased requirement for BIM on Irish construction and engineering projects. One of the primary responsibilities of the BICP research team is to collate data to assist the National BIM Council of Ireland in the formulation of a National BIM Roadmap. To assist the Council with this task the BICP research team applied five macro BIM maturity conceptual models to assess Ireland’s BIM maturity. The results from the models were further utilised to develop a …

How Are We Being Informed About Climate Change?, Elisa Perpignan, Oluwasegun O. Seriki, Rollis Jiofack, Derrick Agyapong

Conference papers

Scientific poster ‘How is Europe being informed about Climate Change?’ This poster was presented as part of the research results that have been delivered on behalf of the Women Partnership for the 'Climate change, migration & me Challenge' which was organised part of the Young Water Professional program of the Amsterdam International Water Week.

The poster won the second prize with the team comprising Elisa Perpignan, Derrick Agyapong, Rollis Jiofack, Oluwasegun Seriki (participating online out of respectively Ghana, Burkina Faso and Ireland), from the case: European Pact for Water. The team was selected to attend the Planetary Security Conference – …

Modelling Tree Contribution In Susceptibility Analysis Of Shallow Llandslides, Roberto José Marín Sánchez, Juan Pablo Osorio

Articles

In this paper an assessment of shallow landslides susceptibility in a tropical and mountainous terrain is made. A method that allows to model slope stability over large areas is used. Tree contribution is quantified by means of three parameters: rainfall interception, root reinforcement and tree surcharge. A rainfall interception model is used to determine the rain available for infiltration and its temporal distribution during the simulation. The hydrological models included in TRIGRS are described, which allows to determine the pore water pressure depending on the initial conditions. This pore water pressure is used in the revised infinite slope stability model, …

What Lessons Can Be Learned From The Delivery Of The First Building On The Grangegorman Campus Using Building Information Management (Bim)?, Pat O'Sullivan, Avril Behan

Conference papers

There is an acceptance that BIM, via data management, can be integrated with FM to reduce costs during the Operations and Maintenance stage of a project. However, what has not been documented is the ‘on the ground’ reality which can be reviewed as a lessons learnt exercise to improve the implementation of BIM FM for future projects. This case study sets out to explore the realities of a client’s adoption of BIM based upon the actual experience of the Greenway Hub. Rather than relying on anecdotal evidence the research was based upon the real practices and experiences of the Dublin …

Mass-Balance Assimilative Capacity Model Of Inniscarra Reservoir, Zeinab Bedri, Ahmed Nasr, Sean Crowley

Conference papers

Wastewater arising from the Coachford agglomeration is treated at the existing Coachford Waste Water Treatment Plant (WWTP). This wastewater treatment facility has a primary treatment only with a design capacity of 450 population equivalent (PE) and it discharges the effluent into the Inniscarra Reservoir. The discharge from Coachford WWTP has been identified by the Lower Lee - Owenboy Water Management Unit Action Plan (WMUAP) as a point source pressure on the waters of the Lower Lee - Owenboy catchment and also as a cause of the strongly eutrophic status of Inniscarra Reservoir water quality by the EPA in 2009. Therefore, …

Bs News November/December

Building Services Engineering

No abstract provided.

Weighting The Perceived Importance Of Minimising Economic, Social And Environmental/Cultural Risks In Flood Risk Management, Zeinab Bedri, John O'Sullivan, Mark Adamson

Conference papers

In 2006, the Office of Public Works (OPW) began the National Catchment-based Flood Risk Assessment and Management (CFRAM) Programme through a series of pilot studies. A Multi-Criteria Analysis (MCA) Framework was developed through the CFRAM pilot studies that integrated a range of objectives related to human health and society, the environment and cultural heritage and the economy into the core process of selecting suitable flood risk management measures for a given area or location, and then for prioritising national investments for different schemes and projects. In support of this MCA framework, UCD, was commissioned to undertake a collaborative study with …

Establishing The Key Pillars Of Innovation Required To Execute A Successful Bim Strategy Within A Construction Sme In Ireland, Barry Mcauley, Patrick Carroll

Conference papers

The recent resurgence of the Irish Construction Industry comes at a time of global transition towards an information revolution, with technology now playing a vital role within our post-recessionary society. BIM is now seen as a core technology at the forefront of this transformational change which can present Construction SMEs with opportunities to new financial ventures. If any SME organisation is to be successful with BIM adoption then innovation must be the starting point. The aim of this paper is to establish the enabling factors required for innovating a BIM strategy within a SME Construction Organisation. The methodology involved a …

A Comparative Investigation Of Industry, Academics' And Students' Perceptions On Essential Sustainability Knowledge, Competencies And Skills, Lloyd Scott

Conference papers

Design and construction educational programmes offered throughout the world play a vital role in sustainability education by producing professionals knowledgeable and competent in sustainable practices. It is extremely important to align the sustainability knowledge of the graduates to the industry expectations. This paper compares industry expectations about essential sustainability knowledge with both academics and students perceptions of requisite knowledge about sustainability. A three stage mixed research approach was adopted for the study. Essential sustainability knowledge expected from recent graduates was identified through literature review and surveys of architectural design and construction firms. Students enrolled in architecture and construction programmes were …

Reliability Analysis Of Active Earth Pressure For Cantilever Walls On Mudflows And Residual Soils Of The Aburrá Valley, Juan David Castro, Juan Camilo Viviescas, Juan Pablo Osorio

Conference papers

According to the variability of the local geology of the Aburrá Valley, two geological strata with similar grain size distribution were analyzed. The geologies are composed of mudflows and residual soils from the San Diego stock in the Poblado neighborhood. These soils show a similar mechanical behavior in relation to the number of blows of the standard penetration test SPT. The analysis was carried out by reliability methods for the determination of the active earth pressure for the geotechnical design of a cantilever walls. The analysis consists in the variation of the height of the retaining wall between 1 and …

Geology Influence In The Slope Stability Analysis By Limit Equilibrium, Finite Elements And Random Finite Elements Methods, Juan Camilo Viviescas, Juan Pablo Osorio

Conference papers

Slope stability analyzes correspond to the evaluation of the safety factors commonly performed through the limit equilibrium and finite element methods. Due to the uncertainty of the geotechnical parameters, different statistical methods have emerged such as the limit equilibrium combined with the Monte Carlo simulation method and the random finite elements, which have been widely accepted in recent years. Normally, these analyzes are not performed taking into account the geological influence on the geotechnical properties, so in this work we proceed with the comparison of several geometrical typologies of slopes for mudflows and a residual soils of the Stock San …

Design And Planned Obsolescence. Theories And Approaches For Designing Enabling Technologies, Matteo Zallio, Damon Berry

Articles

We are currently living in a decade where smart objects and Internet of Things (IoT)-based devices are becoming part of daily life in different contexts. This research seeks to investigate and verify, by using a formal literature review methodology, the most visible aspects of technological development, within the Industry 4.0 and IoT scenario, in relation to the theories of the so called “Planned Obsolescence”.

This study covers a defined number of works on Design theories and practices on how to face the issue of built-in obsolescence of devices in the era of the Connected Devices. The majority of the works …

Teaching Professional Skills In Engineering Programmes: The Academic Perspective, Una Beagon

Other resources

My interest in preparing engineering students for a successful career in industry stems from personal experience of recruiting, mentoring and managing graduates in civil and structural engineering consultancies. The range of skills, abilities and values of each graduate was varied, and it became apparent that academic achievement, whilst important, was not the defining skill for achieving early responsibility or promotion within the company. More often, the graduate who could communicate well and self-direct his/her work was given more responsibility and opportunity.

The intent in this paper is to present a plan for a PhD research study in order to elicit …

Bs News September/October

Building Services Engineering

No abstract provided.

Bim+Blockchain: A Solution To The Trust Problem In Collaboration?, Malachy Mathews, Dan Robles, Brian Bowe

Conference papers

This paper provides an overview of historic and current organizational limitations emerging in the Architecture, Engineering, Construction, Building Owner / Operations (AECOO) Industry. It then provides an overview of new technologies that attempt to mitigate these limitations. However, these technologies, taken together, appear to be converging and creating entirely new organizational structures in the AEC industries. This may be characterized by the emergence of what is called the Network Effect and it’s related calculus. This paper culminates with an introduction to Blockchain Technology (BT) and it’s integration with the emergence of groundbreaking technologies such as Internet of Things (IoT), Artificial …

Analysis Of Traffic Collisions In Dublin Using Gis Based System, Jagteshwar Singh, Niamh O' Reilly

Conference papers

This study aims to analyse traffic collisions in the Greater Dublin Region between the period 2006-2012, using GIS to identify hotspots and examine the relationship between collisions and a range of contributory factors including vehicular speeds, traffic volume, road curvature, road category and distance from intersection that could enable prediction of traffic collisions. To this end, Road Safety Authority (RSA) collision data for Dublin Region geocoded as point events, road profiles, traffic flow characteristics on which these occur are spatially merged using ArcGIS and FME software to establish if a significant relationship exists between collision frequencies on road links and …

An Evaluation Of The Efficiency Of Compartmented Alginate Fibres Encapsulating Rejuvenator As Asphalt Pavement Healing System, Amir Tabakovic, Luke Schuyffel, Aleksandar Karac, Erik Schlangen

Articles

This paper explores the potential methods for evaluating a healing system for asphalt pavements. The healing system under investigation involves compartmented calcium-alginate fibres encapsulating an asphalt binder healing agent (rejuvenator). This system presents a novel method of incorporating rejuvenators into asphalt pavement mixtures. The compartmented fibres are used to distribute the rejuvenator throughout the pavement mixture, thereby overcoming some of the problems associated with alternate asphalt pavement healing methods, i.e., spherical capsules and hollow fibres. The asphalt healing efficiency methods to be evaluated in this paper include: (i) standard test methods for asphalt pavements, such as the Indirect Tensile Strength …