Civil and Environmental Engineering Commons^™

Semi-Active Structural Control Of A 2-Story Shear Building, Alana K. Wilbee, Shirley Dyke

The Summer Undergraduate Research Fellowship (SURF) Symposium

With continuing urban development across the world, it is becoming ever more important to provide increased structural safety against events such as earthquakes and strong winds. The field of structural control has recently been growing to meet these challenges through the use of semi-active control methods, such as the Magnetorheological (MR) Damper. However, due to the non-linearity of the device, the knowledge base surrounding the MR Damper and its various control algorithms still needs to be strengthened before large-scale implementation of this control method can occur. To address these issues, this study will examine a two story benchmark structure using …

Compression Testing And Failure Modes Of Steel-Concrete Composite (Sc) Structures For Nuclear Containment, Patrick Michael Wanamaker, Amit H. Varma

The Summer Undergraduate Research Fellowship (SURF) Symposium

Although being able to provide much cleaner power than burning coal and other fossil fuels, nuclear power plants are still a tough sell to the general public due to their history of being spontaneously dangerous. The containment structures surrounding these nuclear plants, however, can play a huge role in reducing the risks associated with them. Relatively new designs for these containment assemblies, known as SC (steel-concrete composite) structures, aim to increase the strength and durability of the containment facilities while keeping costs down. By varying the spacing between shear studs, the ratio of concrete to steel, and the ratio of …

Modeling Target Disinfection By-Product Dynamics In Indoor Swimming Pools, Barnard S. Mondal, Cary Troy, Mehrnaz Afifi, Shih-Chi Weng, Ernest R. Blatchley Iii

The Summer Undergraduate Research Fellowship (SURF) Symposium

Chlorination is the primary disinfection method for swimming pools in the United States; however, chlorine also reacts with pollutants (e.g., sweat, urine and anthropogenic compounds) to form disinfection by-products (DBPs). Some DBPs are asthma causing (e.g. nitrogen-trichloride) and even carcinogens (e.g., trihalomethanes and nitrosamines). Consequently, exposure to DBPs poses health risks to patrons and staff in pool environments. Furthermore, volatilization of DBPs is enhanced by bather activity, but the relationship between activity and volatilization has yet been quantified such that the dynamic behavior of DBPs can be predicted. Therefore, the objective of this research is to …

Real-Time-Hybrid-Simulation Of Multi-Degree-Of-Freedom Systems With Multiple Time Steps, Lanxi Liu, Arun Prakash

The Summer Undergraduate Research Fellowship (SURF) Symposium

Computational simulation and physical experiments are both widely used in testing the response of a structure under earthquake loadings, but physical experiments can be expensive for large problems and numerical may result in the loss of important structural behavior caused by a large amount of assumptions. Real-time hybrid simulation (RTHS) is a combination of these two approaches, which uses both a numerical and physical substructures that interact in real time to simulate structural behavior. The numerical and physical substructures are connected using a transfer system that enforces compatibility between them. The physical substructure needs to be run at a very …

Insights Into The Effect Of Geometrical Parameters In The Mechanical Properties Of The Radular Teeth Of The Cryptochiton Stelleri – A 3d Print Approach, Chan Jeong, Enrique Escobar, Pablo Zavattieri Dr.

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Cryptochiton Stelleri is known to have ultra-hard radular teeth that have one of the largest hardness (9-12GPa) and stiffness (90-125GPa) among other biological materials such as Enamel and Abalone shell. The ultrastructure of the teeth is formed by a bundle of highly mineralized rods composed of iron oxides and organic material. The main method to measure the material properties has been through nanoindentation. However there are limitations to nanoindentation of the Chiton’s teeth such as limited equipment, costly and time consuming preparation of the samples, and observation of nanoscale features being difficult. In this work, the rod-like microstructure of …

Deep-Water Near-Bottom Turbulence In Lake Michigan: An Underwater Investigation, David J. Cannon, Cary Troy

The Summer Undergraduate Research Fellowship (SURF) Symposium

Motivated by a need to characterize near-bottom deep-water turbulence for an understanding of the filtration capabilities of invasive quagga mussels, an instrument tripod was deployed in Lake Michigan for six months in 60m of water to measure current velocities, with specific interest being paid to near-bottom (0.10 to 0.95 meters above bottom) velocities during the deployment. The deployment period (September 2012-April 2013) was characterized by very little stratification and a median temperature of about throughout the water column. A mean horizontal velocity of 3.6 cm/s with a standard deviation of 2 cm/s was also measured at 1 meter above the …

Environmental Monitoring In Preparation For The Installation Of A Green Roof, Andrew N. Martin, Ming Qu

The Summer Undergraduate Research Fellowship (SURF) Symposium

Green roofs are becoming an increasingly popular way to improve the environmental, economic, and aesthetic performance of both new and existing buildings. Along with the green roofs themselves, it is also common to install sensors to measure various environmental parameters that are affected by or important to the operation of the roof such as precipitation, temperature, and runoff. However, for most of these systems, the sensors are installed at the same time or even after the green roof. Therefore, no before-and-after comparisons can be made for those roofs. To account for this missing data, monitoring equipment was installed on a …

Recursive Multi-Time-Step Coupling Of Multiple Subdomains, Yukun An, Payton Lindsay, Xiaowo Wang, Arun Prakash

The Summer Undergraduate Research Fellowship (SURF) Symposium

The need for efficient computation methods for modeling of large-scale structures has become critically important over the past few years. Efficient means of analysis often involve coupling in space through domain decomposition and multi scale methods in time. The multi-time-step coupling method is a coupling method in time which allows for efficient analysis of large-scale problems for structural dynamics where a large structural model is decomposed into smaller subdomains that are solved independently and then coupled back together to obtain the global solution. For coupling of more than two subdomains that are solved at different timesteps, we employ recursive methods. …

Estimation Of Two-Stage Ditch Excavation Volume Using Lidar Data Full Paper, Kirsten E. Paff, Jane Frankenberger, Naime Celik

The Summer Undergraduate Research Fellowship (SURF) Symposium

Drainage ditches are a major pathway for sediment, nutrients, and pesticides to enter stream systems, which threaten environmental and human health. Unlike trapezoidal ditches, two-stage ditches have a vegetated bench that acts as a floodplain, which helps to prevent erosion and to increase the processing of nutrients to improve water quality. Converting a trapezoidal ditch to a two-stage ditch is expensive, due to the large volumes of soil that need to be excavated. Since ditch geometries vary significantly and surveying each potential site by hand would be time consuming and expensive, a tool based upon online Light Detection and Ranging …

Adaptive Targeting: Engaging Farmers To Assess Perceptions And Improve Watershed Modeling, Optimization, And Adoption Of Agricultural Conservation Practices, Margaret Mccahon Kalcic

Open Access Dissertations

Targeting agricultural conservation practices to farmland that has the greatest impact on surface water quality has received wide support from scientists and watershed managers. The targeting approach has, however, been politically contentious as many believe farmers will oppose the approach on grounds such as privacy invasion and unfair distribution of government incentives. Targeting conservation practices using complex optimization models has become common in the scientific community, and yet targeted results are underutilized in practice because of difficulties such as knowledge transfer and absence of a political framework for their use. For targeting to be successful, it must be politically supported …

Characterization Of Fractures Subjected To Normal And Shear Stress, Min-Kwang Choi

Open Access Dissertations

Results from a series of laboratory experiments to determine fracture specific stiffness, for a fracture subjected to shear and normal stress, are presented and analyzed. The experimental work focuses on the determination of relations between normal and shear fracture specific stiffness and between spatial distribution of fracture specific stiffness and fluid flow through the fracture

The ratio of shear to normal fracture specific stiffness is experimentally investigated on a fracture subjected to shear as well as normal stress. Synthetic fractures made of gypsum and lucite were prepared with different fracture surface conditions: either well-mated or non-mated. For well-mated fracture surfaces, …

Developing A Framework For Determining The Contribution Of Transportation Project To Sustainable Development, Karim Ahmed Abdel Warith

Open Access Dissertations

In the past few years, stakeholders in the transportation industry have been concerned with sustainability. However, transportation decision makers have had difficulty incorporating sustainability into transportation infrastructure decisions. This is mainly attributed to the vagueness of the term. Incorporating sustainability into transportation decision making has been a desire put forth by engineers for that past 10 years. However, with no apparent method of defining sustainability, designers and decision makers have not been able to fulfill this desire.

This investigation attempts to define sustainability in a comprehensive and quantitative manner. The research proposes a new methodology that relies on the objective …

Influence Of Strand Debonding On The Shear Strength Of Prestressed Concrete, Michael David Wesson

Open Access Dissertations

Strand debonding is a common method used to reduce flexural stresses caused by prestress transfer in the end regions of pretensioned concrete beams. Debonding is especially useful when section geometries prohibit draping such as U-beams. Based on concerns regarding shear strength, the AASHTO bridge design specification currently limits the percentage of strands that can be debonded. These limits have been found in practice to limit both the efficiency and economy of bridge girders. For this reason, a number of states chose to ignore these limits. The objective of this research is to improve the understanding of the influence of debonding …

The Application And Analysis Of Automated Triangulation Of Video Imagery By Successive Relative Orientation, Jae Sung Kim

Open Access Dissertations

The purpose of this thesis is the analysis and evaluation of methods to orient a strip of images using an automated approach. Automatic orientation of strips of video frame imagery would facilitate the construction of three dimensional models with less demand on a human operator for tedious measurement. Often one has no control points, so only relative orientation is possible. The relative orientation process gives camera parameters such as attitudes and selected baseline components and it can be implemented by using either collinearity or coplanarity equations. To automate the point selection, the pass and/or tie points were detected by the …

Cloud To Cloud Registration For 3d Point Data, Darion Shawn Grant

Open Access Dissertations

The vast potential of digital representation of objects by large collections of 3D points is being recognized on a global scale and has given rise to the popularity of point cloud data (PCD). 3D imaging sensors provide a means for quickly capturing dense and accurate geospatial information that represent the 3D geometry of objects in a digital environment. Due to spatial and temporal constraints, it is quite common that two or more sets of PCD are obtained to provide full 3D analysis. It is therefore quite essential that all the PCD are referenced to a homogeneous coordinate frame of reference. …

Detecting And Quantifying Damage In Buildings Using Earthquake Response Data And Capacity Curves, Jeffrey David Dowgala

Open Access Dissertations

In the process of designing a building for seismic resistance, structural engineers design with the intent of preventing collapse while expecting inelastic behavior to occur in extreme strong ground motion events. Structural engineers rely on idealized mathematical models of the structural systems and nonlinear analysis methods to estimate the capacity of a building to resist the demand of strong earthquake ground motions. Compared to estimates and approximations based on numerical nonlinear analyses, a capacity curve constructed from actual building response data would be a more realistic representation of the behavior for the building. A method is presented on how capacity …

Manifold Learning Based Spectral Unmixing Of Hyperspectral Remote Sensing Data, Jun-Hwa Chi

Open Access Dissertations

Nonlinear mixing effects inherent in hyperspectral data are not properly represented in linear spectral unmixing models. Although direct nonlinear unmixing models provide capability to capture nonlinear phenomena, they are difficult to formulate and the results are not always generalizable. Manifold learning based spectral unmixing accommodates nonlinearity in the data in the feature extraction stage followed by linear mixing, thereby incorporating some characteristics of nonlinearity while retaining advantages of linear unmixing approaches. Since endmember selection is critical to successful spectral unmixing, it is important to select proper endmembers from the manifold space. However, excessive computational burden hinders development of manifolds for …

Indiana Local Technical Assistance Program Governmental Accounting Standards Board Statement No. 34 General Infrastructure Retroactive Reporting Implementation Assistance Manual, Government Fixed Asset Services, Inc.

Indiana Local Technical Assistance Program (LTAP) Publications

This assistance manual is intended to provide guidance for local agencies to report their assets in compliance with the general infrastructure reporting requirements of Governmental Accounting Standards Board Statement No. 34. This manual is an update to the original manual, which was developed in 2004, and includes current depreciators and information on annual updates.

Partners On Campus: Open Access Transportation Research At Purdue University, David Scherer

Libraries Faculty and Staff Presentations

In the third community webinar presentation on regional and community partnerships, David Scherer, the Scholarly Repository Specialist at Purdue University, described how institutional repositories can support community engagement through the rewards of the partnership between Purdue's institutional repository, Purdue e-Pubs, and Indiana's Joint Transportation Research Program (JTRP). The Purdue Libraries and the Purdue University Press have worked to archive and showcase the fruits of over 75 years of strong collaboration between Purdue University and the Indiana Department of Transportation on research that has a significant impact on the safe and efficient operation of transportation systems throughout Indiana, the United States, …

Energy, U.S. Department Of, Bert Chapman

Libraries Faculty and Staff Scholarship and Research

Provides information about the U.S. Department of Energy (DOE) and its predecessor agencies and how DOE influences federal energy policy and scientific research in the western U.S.

Army Corps Of Engineers, U.S., Bert Chapman

Libraries Faculty and Staff Scholarship and Research

Provides an overview of how the U.S. Army Corps of Engineers has influenced historical and contemporary economic, environmental, and political developments in the American West.

Aridity, Bert Chapman

Libraries Faculty and Staff Scholarship and Research

Provides an overview of how aridity in the American West has influenced that region's economic, environmental, and political development and U.S. Government policies in this region.

Colorado River Compact (1922), Bert Chapman

Libraries Faculty and Staff Scholarship and Research

Provides an overview of the 1922 Colorado River Compact seeking to fairly distribute Colorado River water to Arizona, California, Colorado, Nevada, New Mexico, Utah, and Wyoming and their increasing populations.

Hydroelectric Power, Bert Chapman

Libraries Faculty and Staff Scholarship and Research

Provides a historical overview and contemporary analysis of the advantages and disadvantages of federal government support for hydroelectric power in the American West.

Oil Industry, Bert Chapman

Libraries Faculty and Staff Scholarship and Research

Provides an overview of the historical and contemporary development of the American oil industry and how it has impacted U.S. natural resources policies in the American west.

Control Charts As A Productivity Improvement Tool In Construction, Jospeh Hubert Ault

Purdue Polytechnic Masters Theses

This study examined the use of individuals control charts to facilitate the productivity improvement of repetitive construction processes. Cycles times for excavation, forming, and reinforcing processes were observed using stratified random sampling during the construction of six residential home foundations. The cycle time information was plotted on control charts followed by an intervention, with the applicable crew members and management, to analyze the charts and propose solutions to any problems identified. Following the intervention, more samples were collected for comparison to the baseline observations collected before the intervention. The mean cycle times were compared before and after the interventions using …

Assessment Procedures For Paved And Gravel Roads, Claudio Figueroa, Bradley Fotsch, Sarah M. Hubbard, John Haddock

Indiana Local Technical Assistance Program (LTAP) Publications

The funding available to local agencies in Indiana to manage roadways has decreased in recent years, and many agencies cannot provide adequate maintenance with the available resources. Consequently, agencies are doing everything they can to evaluate the least expensive method to maintain their roads that will meet their objectives and needs. In some cases, the most appropriate surface type is a paved road, and in some cases, it is a gravel road. The decision as to the most appropriate surface type depends on a variety of factors, such as cost, traffic volume, development and public input. The purpose of this …

Characterizing Reliability Of Manual Intersection Turning Movement Counts Using Modern Data Collection Technology, Gary Shoup, Steve M. Remias, Alexander M. Hainen, Gannon Grimmer, Alexander D. Davis

JTRP Other Publications and Reports

Collecting intersection turning movement counts at intersections is an essential data collection task for many types of traffic engineering studies. On a daily basis, consulting firms and agencies collect turning movement counts that are used for preparing traffic impact studies, determining design hours for road improvements, and the retiming of traffic signals. Although there is a substantial body of literature on the stochastic nature of traffic volumes and how they vary by time, day of week, and season, the literature is quite sparse on how accurately turning movement counts can be collected at signalized intersections. The objective of this paper …

Trail Data Acquisition, Amy Hartzog, Greg Lindsey, Rory Robinson

Purdue Road School

Trail usage is one of the most frequently asked questions when planning and maintaining trails. From building justification to maintenance dollars, community leaders want to know how many people are being served by the trail. This session will explain to the attendees the different data collection methods, how the data can be collected and used, and why it is so important.

The Importance Of Performing Route Surveys In The State Of Indiana, Rodney Kelly, Chester Parsons, Grant Niemeyer

Purdue Road School

This presentation provides an overview of Rule 12 and discuss what is involved in a Location Control Route Survey (LCRS). Details such as where they must be performed, why they are important, their benefits and best practices will be discussed.