Civil and Environmental Engineering Commons^™

Continuum Modeling Methodology For Dynamic Behavior Of Towers, Khaled A. Obeid

Civil & Environmental Engineering Theses & Dissertations

A very common problem in Civil Engineering is the analysis and design of lattice structures. These types of structures generally consist of repetitive sections and have been utilized in the erection of transmission and communication towers, space roof trusses, solar energy collectors, and space platforms. Since lattice structures consist of a significantly large number of members and subsequently a large number of nodes, the classical discrete technique of analysis can be very expensive even on today's modern computers. This study applies a rational approach which capitalizes on the repetitive nature of towers to develop the equivalent continuum model for the …

Micromechanics Of Granular Materials And Its Relation To Wave Velocity, Tarun K. Agarwal

Civil & Environmental Engineering Theses & Dissertations

The macro characters of the granular materials depend upon micromechanical parameters such as the void ratio, particle shape, contact force distribution, and initial state of the fabric of the assembly. Since it is difficult to evaluate these internal parameters from laboratory experiments, a macro measure is desired which depends directly on these internal parameters. One such measure has been shown to be dynamic shear modulus but it was incomplete in predicting directional changes in the internal parameters. Therefore, it is hypothesized here that the complete elastic moduli matrix will have more direct information about the internal parameters, especially the dynamic …

The Frontal Method For Finite Element Analysis On Ibm-3090 Vector Computer, Chaerul Kamal

Civil & Environmental Engineering Theses & Dissertations

In this report, a Finite Element program based on the Frontal method was implemented on the IBM-3090 to exploit the vector capabilities offered by modern high performance vector computers. The overall computational speed for the Frontal Finite Element program was increased by 30% when the vector instructions were introduced. The Frontal solution for a system of simultaneous linear equations, however, has shown only minor improvement when vector instructions were used. More improvement in computational speed and memory storage can be expected by using the Parallel Frontal method with Substructures.

Nonproportionally Loaded Steel Beam-Columns And Flexibly-Connected Nonsway Frames, Siva Prasad Darbhamulla

Civil & Environmental Engineering Theses & Dissertations

A theoretical study of the inelastic stability of nonproportionally loaded steel beam-columns and flexibly-connected frames is conducted. Specifically, solution techniques are formulated to predict the nonlinear behavior of cross sections, spatial beam-columns, and nonsway plane frames under the combined influence of imperfections, flexible connections, and nonproportional loads. A set of new inelastic slope-deflection equations for imperfect members are derived and their use illustrated through in-depth studies of flexibly-connected portal and two-bay two-story frames. These equations are derived from a system of nonlinear ordinary differential equations. The member studies are carried out using a second-order finite-difference solution to a set of …

Dynamic Analysis Of Linear Structural System Using Ritz Vector Method And Substructuring Formulation, Vijay R. Modi

Civil & Environmental Engineering Theses & Dissertations

In this study, the substructuring formulation is incorporated into Ritz Vector method to obtain and solve the reduced system of dynamic equilibrium equations. Two-dimensional and three-dimensional truss problems are considered in the present study. The accuracy and computational time using the proposed technique are compared with known solutions. The effect of using different number of substructures and Ritz vectors are also investigated, equations solver is utilized to Moreover, a version of a parallel further enhance the numerical performance of the proposed technique on the FLEX/32 Multicomputer.

An Experimental Study Of Dewatering Of Alum Sludge, Uday G. Kelkar

Civil & Environmental Engineering Theses & Dissertations

The use of aluminum sulfate (Alum) as a coagulant for treating surface water was introduced in 1884. When this salt is added to water, the aluminum Ion hydrolyzes by reaction that consumes alkalinity in water. The gelatinous hydroxide thus formed in the reaction, carries suspended material with it as it settles. In addition, however, it is likely that positively charged hydroxyl-bridge dimmers and higher polymers are formed which interact specifically with the colloidal particles, bringing about coagulation. These gelatinous floes settle by gravity, called sludge, consists of relatively large quantities of suspended and colloidal inorganic and organic materials.

The disposal …

Effect Of Fabric On Stress-Strain Relation, Volume Change, And Dynamic Shear Modulus Of Ottawa Sand, Ming-Tarng Chen

Civil & Environmental Engineering Theses & Dissertations

To evaluate the effect of fabric on stress-strain behavior, volume change, and the dynamic shear modulus of Ottawa sand, four series of tests on hollow cylindrical specimens were performed by a torsional simple shear/resonant apparatus. All specimens were first isotropically consolidated, and then sheared along the different stress paths while keeping the mean effective stress constant. The test results showed that depositional fabric had a slight influence on the stress-strain behavior, and one half-cycle of pre-shearing created a clear anisotropy on the stress-strain response. The intermediate principal stress had a dominant effect on volume change characteristics but it might not …

Computer-Aided Analysis And Design Of Rectangular Buried Tank Walls And Its Safety Factor Evaluation Based On Yield Line Analysis, Rakiya J. Fatoohi

Civil & Environmental Engineering Theses & Dissertations

This thesis presents the results of a study that determines the true safety factor of underground square reinforced concrete tank walls.

The walls are analyzed and designed by elastic method. The amount and distribution of the reinforcement was determined by use of the alternate design method (working stress) in compliance with all ACI code requirements. The wall's ultimate moment was computed by use of yield line theory assuming non-isotropic reinforcement. The ultimate value of the earth pressure was computed and compared with the elastic analysis and design values to give the true safety factor.

The results of this study indicate …

Structural Sensitivity Analysis On A Parallel Computer, Niu Kian Teck

Civil & Environmental Engineering Theses & Dissertations

Substructuring formulation using adjoint variable approach has been developed for design sensitivity analysis and optimization of large scale structures. In this study, the procedure for statics and sensitivity analysis are re-examined to propose a programming scheme which can be implemented either in a sequential or parallel environment. The computational times of the substructuring formulation using a single processor versus multi-processors are compared to see the effectiveness of the formulation in the concurrent computing environment.

The Effect Of Grinding On The Sorption Capacity Of Activated Carbon, John Garrett Dempsey

Civil & Environmental Engineering Theses & Dissertations

The current procedure employed to design full scale activated carbon contacting systems is presented in detail and followed by a review of the more important process controls and operating parameters. Inherent limitations of the design procedure are identified, with the need to be able to accurately predict carbon sorption capacity from bench scale analysis determined to be the most important. Some of the more recent models developed to predict activated carbon sorption capacity were analyzed leading to the realization that even the most sophisticated dynamic models were based upon sorption capacities determined from classical isotherm procedures. The validity of the …

A Quantitative Approach To Simulation And Analysis Of Storm Water Systems, John Nathan Paine

Civil & Environmental Engineering Theses & Dissertations

A generalized package of hydrologic and hydraulic models and programs is developed for the quantitative analysis of watersheds and drainage networks. The package is microcomputer based and is available to interested parties. Full documentation is included in the Appendix. The approach applies a lengthy historical rainfall record to the system in continuous simulation. One of the most powerful operational hydraulic routing models available is adopted into the package. Output takes the form of statistical predictions of flood stages, discharges, storage requirements, and rainfall analyses for various return-periods. Computer runs are completely summarized. The package was applied to a 969-acre watershed …

Removing Fluoride From Drinking Water By Organic Polymers, Eleni Davou Achilleos

Civil & Environmental Engineering Theses & Dissertations

Fluoride is a substance that can provide beneficial or detrimental effects depending on the total amount ingested. Naturally occurring high fluoride concentrations exist in many drinking water supplies. The fluoride removal methods developed in the past have been found to be either impractical and/or not cost effective.

The purpose of this study was to determine whether organic polymers can effectively remove fluoride. The water used in this study contained naturally occurring fluoride concentrations between 4.5 to 5.5 mg/1 and it was collected from the City of Franklin, Virginia, water supply system. Laboratory jar test procedures, which simulated a conventional water …

Selecting Non-Point Source Pollution Treatment Practices Using Linear Optimization, John Gardy Garland Iii

Civil & Environmental Engineering Theses & Dissertations

This paper provides a case study application of a linear optimization program as a water quality management tool. The optimization program seeks to minimize the cost of nonpoint source pollution control by selecting the best combination of pollution control management practices for Hampton, Virginia. The management practice options are grass swale roadways, porous pavers, ponds, detention basins and fertilizer management education. Management practice selection is limited by constraints on land-use and water quality. Pollutants evaluated are total nitrogen, total phosphorus, suspended solids, fecal coliforms and biochemical oxygen demand (five-day). The value in the water quality constraints for pollution loading on …

Groundwater Management By Linear Programming, Seungho Song

Civil & Environmental Engineering Theses & Dissertations

Three hydraulic optimization models are developed. These models combine the finite difference equations of two-dimensional groundwater flow in composite aquifers with various linear programming techniques. The hydraulic submodel employed in these hydraulic optimization models is so versatile that it accounts for time varying pumpage, leaky artesian conditions, a variety of boundary conditions, induced infiltrations from streams or rivers, and conversion from artesian to water table conditions. The objective of submodel 1 is to maximize the total hydraulic head from pumping wells at the end of a study period. The objective of submodel 2 is the same as submodel 1, but …

Selection Of Sludge Conditioning Chemicals And Filter Media For Vacuum Filter Dewatering Of Sludge At The Atlantic Wastewater Treatment Plant, Douglas W. Fredericks

Civil & Environmental Engineering Theses & Dissertations

A literature review was conducted to determine the types of vacuum filter systems available for sludge dewatering, the characteristics of wastewater sludge which are important to dewatering, and the methods of sludge conditioning for vacuum filtration which are available. Capillary suction time and Buchner funnel tests were performed to determine the dewatering characteristics of sludge conditioned with ferric chloride and lime, polymer, polymer and lime, and polymer and incinerator ash. Filter leaf tests were performed to determine filter cake release characteristics of various conditioned sludge and the performance characteristics of several filter media. It was determined that ferric chloride and …

Treatment Process Optimization At The Lee Hall Water Treatment Plant Newport News, Virginia, Marcy Granum Garnett

Civil & Environmental Engineering Theses & Dissertations

Various methods can be used in operating a water treatment plant. It is desirable to produce good quality water as efficiently and economically as possible. This study evaluates each phase of operation at the Newport News (Lee Hall} water treatment plant for overall efficiency.

This study begins by giving a detailed description of the Lee Hall water treatment plant. The description includes sources of water, a description of each treatment process, a plan view of the treatment plant, and a flow diagram of the treatment plant.

Based on the raw water data, flow rates, and the treatment plant characteristics, the …

Analysis And Stability Of Closed Surge Tanks, John Emory Fowler

Civil & Environmental Engineering Theses & Dissertations

The equations representing the water surface oscillations in a closed surge tank form a set of nonlinear ordinary differential equations when the system is considered as lumped. Because of the nonlinear terms present in the equations, a closed-form solution of the equations is not available. Several numerical methods ranging from single step methods to higher-order multi-step methods were used to find numerical solutions to the governing equations. As all the methods required a similar amount of CPU time, the degree of accuracy required would determine which numerical method should be used. The effect of various system parameters on the stability …

Transient Two Dimensional Ground-Water Flow: A Comparison Of Computed And Analytical Results, Robert Jan Fennema

Civil & Environmental Engineering Theses & Dissertations

The exact analytical solution of the transient-flow equation is compared with the finite difference solution. The finite difference program, written by the author, uses an iterative alternating direction implicit procedure to solve the linearized partial differential equation. A second order accurate central difference method is employed to solve the equation in two dimensions.

Variable cell spacing to divide the physical domain, a weighting factor and a time acceleration function were used to investigate rate of convergence and accuracy of the numerical solution. The exact integral solution to the one-dimensional form of the flow equation i n radial coordinates is used …

Evaluating The Effects Of Alum With Polyelectrolyte Coagulant Aids In Treatment Of Low Turbidity Waters, Kenneth John Stockwell

Civil & Environmental Engineering Theses & Dissertations

Potable water sources usually require treatment for removal of suspended organic and inorganic particles. Conventional treatment processes incorporate chemical coagulants for removal of these suspended particles. Alum is a widely used coagulant that can provide adequate removals of turbidity. However, high alum dosages are required for treatment of low turbidity waters producing a voluminous sludge that is difficult to dewater.

Recent Federal regulations have limited disposal options for chemical sludges. This has prompted a reevaluation of coagulants and their dosages with the goal of reducing the amount of sludge produced and improving the sludge handling characteristics necessary for ultimate disposal. …

Stability Analysis Of Closed Surge Tanks By Phase-Plane Method, Mostafa A. Sabbah

Civil & Environmental Engineering Theses & Dissertations

The governing equations describing water level oscillations in a closed surge tank with compressed air at the top of the tank are a set of nonlinear ordinary differential equations if the hydraulic system is analyzed as a lumped system. These oscillations are stable or unstable depending on the parameters of the plant and the type and magnitude of the disturbance.

The present available stability criterion has been developed by linearizing the governing equations and is, therefore, valid only for small disturbances.

In the research reported herein, the governing equations are normalized to reduce the number of parameters from nine to …

Comparison Of Steady-State Pipe Network Computer Programs, Michael Bernice Holloway

Civil & Environmental Engineering Theses & Dissertations

Four widely used computer programs for the analysis of steady state flows in pipe networks are compared. These programs are NEWTH, written by Jeppson; KENTUCKY, written by Wood; FLOW, written by Epp and Fowler; and LIQSS, written by Stoner. Differences, similarities, advantages and disadvantages of these programs, and various options available are discussed for the benefit of possible future users. In addition, the efficiency of NEWTH, KENTUCKY, and FLOW was tested by simulating a typical network by each program. The listing of LIQSS was not available, and thus was not included in this comparison. In simulation, KENTUCKY used over twice …

Usage And Limitations Of Characteristic Vector Analysis Of Remote Sensing Multispectral Data For The Identification And Quantification Of Water Quality Parameters, Theodore A. Talay

Civil & Environmental Engineering Theses & Dissertations

Recent applications of the technique of characteristic vector analysis to remote-sensing water color data has met with varying degrees of success. It is apparent from these experiments that a more thorough understanding of the informational capability of characteristic vector analysis is needed.

Fundamental Analysis Of The Linear Multiple Regression Technique For Quantification Of Water Quality Parameters From Remote Sensing Data, Charles Henry Whitlock Iii

Civil & Environmental Engineering Theses & Dissertations

Inconsistent results have been obtained from previous experiments which have applied linear multiple regression techniques to remote sensing data for quantification of water quality parameters. The objective of this investigation is to define optical physics and/or environmental conditions under which the linear multiple regression should be applicable. To achieve this objective, an investigation of the signal response equations is conducted and the concept is tested by application to both analytical test cases and actual remote sensing data from a laboratory under controlled conditions.

Investigation of the signed response equations shows that the exact solution for a number of optical physics …

A Model To Investigate The Influence Of Suspended Sediment On The Mass Transport Of A Pollutant In Open Channel Flow, Raymond Scott Chapman

Civil & Environmental Engineering Theses & Dissertations

The environmental impact of the transport of pollutants in open channel flow has for many years been of interest due to the continuous introduction of heavy metals, pesticides, herbicides, and other foreign substances into natural waterways. In order to fully understand this transport process, it-is necessary to examine the significance of its individual components. In the present study an explicit two-dimensional finite difference model, designed to investigate the influence of suspended sediment on the pollutant transport process, is presented. Specific attention is directed toward examining the role of suspended sediment in 1) the turbulent vertical transport mechanism in a stratified …

An Engineering Solution To Improve Water Quality In A Tidal Lagoon, Richard Warren Price

Civil & Environmental Engineering Theses & Dissertations

Rising demand for better water quality stimulated research and development of ways to improve the quality level in existing as well as proposed water systems. At present, most of the solutions focus on biological and chemical processes.

Many natural or man-made water bodies act as receivers for both point and non-point pollution sources. Employment of biological and chemical treatment has proved successful in many of these cases; however, in some cases a more natural physical solution of an engineering mode would be more desirable. A "flushing" technique using the tidal fluctuation as a driving force has been investigated and the …

A Numerical Technique For Solving Rigid Body Impact On An Incompressible, Viscous Medium, Cecil Thomas Chapman

Civil & Environmental Engineering Theses & Dissertations

A technique for solving rigid-body impact on a viscous, incompressible medium is presented. The numerical scheme is adapted from the Marker and Cell (MAC) method developed to solve problems involving time-dependent motion of a viscous, incompressible fluid in two-dimensional space. As the pressure end velocity fields are computed throughout the flow field, the solution gives the force and displacement time history of the rigid-body during the impact phase. In conjunction with this, through a system of marker particles, the changes in configuration of the viscous medium on impact can be studied. With a "movie frame" (incremental time) approach, computational experimentation …

Static And Dynamic Buckling Of Shallow Arches, David D. Loendorf

Civil & Environmental Engineering Theses & Dissertations

The static and dynamic buckling behaviors of a shallow, simply supported sinusoidal arch subjected to both a uniformly distributed step pressure load and a purely impulsive load are considered. Five equilibrium paths are obtained for the arch under static loading conditions. Critical static loads corresponding to two different instability modes and based on characteristics in the load displacement curve are obtained numerically. Critical dynamic loads, corresponding to three different instability modes, are obtained from a numerical procedure in which buckling criteria are based on characteristics in the time response of the structure. The influence of damping on the various dynamic …

A Study Of Elasto-Viscous Material Under Moving Rigid Wheel, Sou-Nan Wang

Civil & Environmental Engineering Theses & Dissertations

This thesis is considered as the solution of interaction between aircraft wheel and soil under landing of airplane. After treating soil as elasto-viscous material, we get a set of non-linear differential equations, such as momentum equations, in viscous region.

A numerical method, Marker-and·-Cell (MAC) method, was used to solve these equations. All data and curves are obtained by using CDC 6600 computer.

Grain Size Reconnaissance Of The Virginia-North Carolina Inner Shelf Analysis By Settling Technique, Robert Bailey Sanford Jr.

OES Theses and Dissertations

The 2-fold purpose of this study is to calibrate a Rapid Sediment Analyzer and to use it to aid in the determination of the genesis of sediment on the inner continental shelf between Cape Henry and Cape Hatteras. Rapid Sediment Analyzer calibration was conducted by comparison of sieving and settling results of similar sands.

The study area was divided into sediment provinces by both a qualitative procedure (grain size and topography) and a quantitatively procedure (factor-vector analysis). Qualitative provinces are beach and surf, upper shore face, lower shore face, sea floor, and terminal shoals. The berm fines from each terminal …

An Experimental Study Of Lateral Soil Pressures And Moments On Flexible Sheet Piles, James H. Donahue

Civil & Environmental Engineering Theses & Dissertations

In order to study the effect compaction has on lateral earth pressures exerted on and bending moments in steel sheet pile bulkheads, an experimental study was undertaken which employed the placement of a non-cohesive soil at two specific densities against three model piles of varying thicknesses. The soil was placed both in a loose and a dense state and the bending strains and deflections of the sheet piles were measured at various stages of backfill. Surface loadings were then placed after completion of the backfilling to observe the effects these loads had on the bending moments. The results of the …