Civil and Environmental Engineering Commons^™

Effect Of Mix Parameters On Longevity Of Bituminous Mixtures, Clayton Reichle

Masters Theses

"This study was performed to evaluate the effects of varying aggregate sources, aggregate gradations on the stripping and rutting potential of bituminous based plant mixes specified by the Missouri Department of Transportation. The different aggregate combinations included two different aggregate sources (Potosi Dolomite and Jefferson City Dolomite) including two variations for the Jefferson City Dolomite mix to simulate a marginally in-specification mix and an out-of-specification but in-field tolerance mix. The "field" mix simulated the marginal mix where field tolerance of high dust and low binder content were maximized. All three mixes were evaluated for stripping susceptibility using the Tensile Strength …

Field Performance Of Alternative And Cost Efficient Cast In Place And Precast Prestressed Concrete Bridge Approach Slabs, Nathan Price Muncy

Masters Theses

"In December of 2010, the Missouri Department of Transportation (MoDOT) investigated alternative cost-efficient bridge approach slabs (BASs). New BAS designs were subsequently developed and had a projected cost savings up to twenty-four percent with anticipated equal or better structural performance. A precast-prestressed (PCPS) BAS was introduced as an alternative to traditional BASs that offers advantages such as rapid construction and improved long-term durability. The three new BAS designs were implemented into in-situ bridge projects by MoDOT and the field performance was evaluated within this research study.

Field testing of each BAS was performed using two MoDOT HS20 trucks. Various instrumentation …

Design, Construction And Load Testing Of The Pat Daly Road Bridge In Washington County, Mo, With Internal Glass Fiber Reinforced Polymers Reinforcement, Zhibin Lin, Mostafa Fakharifar, Chenglin Wu, Genda Chen, Wesley James Bevans, Arun Vijay Kumar Gunasekaran, Sahra Sedigh

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The overarching goal of this project is to deploy and assess an innovative corrosion-free bridge construction technology for long-term performance of new and existing bridges. The research objective of this project is to conduct a comprehensive study (instrumentation, construction, both laboratory and field evaluation) of a rapidly constructed and durable, three-span bridge with cast-in-place cladding steel reinforced concrete substructure and precast concrete decks/girders reinforced with glass fiber reinforced polymers (GFRP). The bridge has one conventional concrete-girder span, one conventional steel-girder span, and one innovative concrete box-girder span. The conventional concrete and steel girders were used to demonstrate the effective use …

Cardinal Raúl Silva Henríquez Bridge During The 2010 Chile Earthquake, Zuocai Wang, Genda Chen, W. Phillip Yen, Ian G. Buckle

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents a case study of the Cardinal Raúl Silva Henríquez Bridge, which experienced significant damage during an earthquake that occurred in Chile on February 27, 2010. Supported by reinforced concrete and steel columns of varying heights, the superstructure of the bridge consisted of 22 steel-girder spans, with one intermediate expansion joint located at the middle of the bridge. At each end of the bridge, the bottom flanges of the girders were welded to their bearing steel plates, which were embedded and anchored into the bridge abutment. Two, three-dimensional, finite element models (global versus local) with beam and solid …

Distribution And Occurrence Of Escherichia Coli In Water And Sediments At Grand Glaize Beach In Lake Of The Ozarks State Park, Jordan Lee Wilson

Masters Theses

"Public swimming beaches at the Lake of the Ozarks State Park (LOSP) are popular vacationing spots for many Missourians; however, on several occasions Escherichia coli (E. coli) concentrations have exceeded standards set by the Missouri Department of Natural Resources (MDNR). Exceedances lead to beach closures which not only represent a potential public health threat but are also detrimental to the local economy and the public's perception of the lake's general water quality. In a collaborative effort between Missouri S&T, the United States Geological Survey (USGS) and the MDNR, an in-depth, two-summer study was conducted which included collection of …

Monitoring Micropile Foundations Of Bridge During Construction, Devin Tavis Dixon

Masters Theses

"Information regarding the load transfer of micropiles during in-service construction has virtually never been monitored or documented. The primary objective of this research project was to monitor the load transfer versus the depth of production micropiles during construction. The micropiles being studied were used to support Bridge No. 2 of the Foothills Parkway in eastern Tennessee during construction. Two of the piers (1 & 2) were instrumented for the purpose of this study. Vibrating wire strain gages (VWSG) were installed on select micropiles within pile groups of twenty (20) micropiles. Seven vibrating wire strain gages were installed on each micropile …

Analysis Of Model Uncertainty In Hydraulic Modeling: The Bstem Application To The Osage River, Annabell Leigh Ulary

Masters Theses

"Uncertainty is inevitable when creating any kind of model. A model can be used in the most accurate way possible, if the uncertainties are understood. This study determines the level of uncertainty in the Bank Stability and Toe Erosion Model (BSTEM) of the Osage River downstream of Bagnell Dam between Lake Ozark, MO and Jefferson City, MO. The statistical analysis of the BSTEM model was performed using the aid of SAS statistical computer modeling software. There were 4 different analysis values used to determine the best fit model for all dependent variables. These values include the F-test, the coefficient of …

Green Roof Water Quality Impacts And Physicochemical Stability, Grace Ella Harper

Masters Theses

"Green roofs can provide environmental benefits and conserve energy; this research evaluated green roof stormwater management, nutrient loading, and erosion prevention for two green roof media. During a pilot study, the runoff quantity and composition from green roof material was evaluated continuously under field conditions for two different media, both tested under planted and unplanted conditions. Water quantity results show over a 40% reduction in runoff from just the growing media and over 60% reduction in runoff with established plants in green roof media over the eight month study. Previous studies have reported a "first flush" of excess nutrients but …

Use Of Ultra-High Performance Concrete To Mitigate Impact And Explosive Threats, Julie Anne Willey

Masters Theses

"This study is a continuation of research conducted by Natalia Carey, Anthony Wulfers, and Dr. John Myers under the DHS ALERT Center. Carey investigated the use of polyurea coating systems to mitigate close range blast threats on wall panels. Wulfers continued this by using both polyurea coatings as well as a sacrificial wood fiber fly ash (WF-FA) layer to try to get increased performance. This research was aimed at the study of ultra-high performance concrete (UHPC) for the use in impact and blast mitigation. There is little information on the performance of UHPC under close range blast loading; therefore it …

Shear And Fracture Behavior Of High Performance Concretes, Mahdi Arezoumandi

Doctoral Dissertations

"Concrete is the most widely used man-made material in the world. Like other materials, it has been improved over time. Nowadays, with continued development of science and technology, a new generation of concretes is produced and is termed high performance concretes. A review of previously published work indicates that very few studies (in some cases none) have addressed the structural behavior of full-scale, high performance concrete elements. This study investigated the shear and fracture behavior of two types of high performance concrete - high-volume fly ash concrete (HVFAC) and self-consolidating concrete (SCC). The HVFAC incorporates up to 70% cement replacement …

Numerical Analyses Of Long Carbon Fiber Reinforced Concrete Panels Exposed To Dynamic Loading, Zahra Sadat Tabatabaei

Doctoral Dissertations

"The purpose of this research was to evaluate impact and blast performance of long carbon fiber reinforced concrete experimentally and numerically. Experimental tests were conducted on plain concrete (PC), reinforced concrete, and four different types of long carbon fiber reinforced concrete (LCFRC). The results from each test were then compared to one another. This comparison indicates that adding long carbon fibers to concrete both increases the post-cracking behavior of concrete and decreases the spalls in either an impact or blast test. Among all of the fibers tested, Fiber Type B3 outperformed the other fibers, absorbing more energy during impact. Numerical …

Direct Shear Transfer Of Lightweight Aggregate Concretes With Non-Monolithic Interface Conditions, Dane Michael Shaw

Masters Theses

"This thesis describes the results of a study initiated to examine the influence of concrete unit weight on the direct shear transfer across an interface of concretes cast at different times. This type of interface is common with structural precast concrete connections, such as corbels, for which shear friction design provisions are commonly used. Increasing use of lightweight aggregate concretes prompted this investigation to determine the appropriateness of current shear friction design provisions with respect to all-lightweight and sand-lightweight concrete. The experimental investigation included thirty-six push-off test specimens, each of which was constructed with a cold-joint at the interface shear …

An Experimental Study On Bond Strength Of Reinforcing Steel In High-Volume Fly-Ash Concrete, Trevor J. Looney, Mahdi Arezoumandi, Jeffery S. Volz, John J. Myers

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The production of Portland cement-the key ingredient in concrete-generates a significant amount of carbon dioxide. However, because of its incredible versatility, availability, and relatively low cost, concrete is the most consumed manmade material on the planet. One method of reducing concrete's contribution to greenhouse gas emissions is the use of fly ash to replace a significant amount of the cement. an experimental investigation was conducted to compare the bond strength of reinforcing steel in high-volume fly-ash concrete (HVFAC)-concrete with at least 50 % of the cement replaced with fly ash-with conventional concrete (CC). This study investigated two HVFAC mixes [with …

Statistical Modelling Of The Coupled Effect Of Mix Design And Rebar Spacing On Restricted Flow Characteristics Of Scc, Yahia Ammar, Khayat H. Kamal, Sayed Mohammed

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Self-consolidating concrete (SCC) is designed to exhibit high deformability and stability to maintain homogenous suspension of coarse aggregate particles in the mortar during flow to ensure adequate passing ability of the concrete through restricted areas and the filling of the formwork without any consolidation. Proper deformability and uniform suspension of coarse aggregate particles in the matrix are key parameters to ensure successful casting and adequate in situ performance. the required flow properties of concrete are affected by the rheological properties of the mixture and the characteristics of the cast element, including the level of reinforcement. the mixture proportioning of SCC …

Influencing Factors On The Dynamic Properties Of Organobentonites, Bate Bate, Susan Burns

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The dynamic responses of soils are important engineering properties, especially for soils with high organic contents, because these soils can underlie critical support structures such as highway bridges or levees. Consequently, the initial tangent shear modulus (Gmax), secant shear modulus ratio (G/Gmax), and damping ratio (D) are important parameters in evaluating the dynamic soil behavior for soils subjected to earthquake, wind, waves, traffic, and equipment vibration. in this study, these dynamic properties of organ bentonites were quantified experimentally using resonant column tests. the results from this study were evaluated in terms of the effect of shear strain, organic content, and …

Investigation Of The Physical And Molecular Properties Of Asphalt Binders Processed With Used Motor Oils, Mohyeldin Ragab, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this work we investigated the performance aspects of addition of used motor oils (UMO) to neat and crumb rubber modified asphalts (CRMA) and related that to the change of molecular size distribution of modified asphalt’s fractions; asphaltenes, saturates, naphthene aromatics, and polar aromatics. Based on the results of temperature sweep viscoelastic tests, addition of crumb rubber modifier (CRM) alone or with UMO results in the formation of internal network within the modified asphalt. Based on the results of short and long term aged asphalts, the utilization of combination of UMO and CRM enhanced the aging behavior of asphalt. Bending …

Effect Of Scc Mixture Composition On Thixotropy And Formwork Pressure, A. F. Omran, Kamal H. Khayat, Y. M. Elaguab

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High lateral pressure exerted on formwork systems by self-consolidating concrete (SCC) is one of the hindrances for using such highly flowable concrete in cast-in-place applications. Self-consolidating concrete is a complex system that can be made using a wide range of mixture proportioning and often incorporated various chemical admixtures and supplementary cementitious materials. the investigation of the effect of each material ingredient independently on lateral pressure of SCC is not a simple task. in this study, thixotropy is rather used to assess the effect of various mixture parameters on formwork pressure. Thixotropy is determined by the evaluation of the structural buildup …

Quantifying The Effect Of Nanoparticles On As(V) Ecotoxicity Exemplified By Nano-Fe2o3 (Magnetic) And Nano-Al2o3, Ji Hu, Demin Wang, Brett E. Forthaus, Jianmin Wang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Nano-Fe₂O₃ (magnetic) and nano-Al₂O₃ are increasingly used in biomedical fields for cellular labeling and drug delivery, and in the industry as catalysts. However, they may also serve as carriers of toxic contaminants and negatively impact the environment and human health. in the present study, Ceriodaphnia dubia was used to assess the toxicity of these nanoparticles (NPs) with and without the presence of background arsenic(V) (As[V]). the results showed that although these NPs alone did not exhibit significant toxicity in the experimental concentration range, they could significantly enhance the toxicity of As(V). the accumulation of …

Numerical Simulation Of Particle-Driven Gravity Currents, Sangdo An, Pierre Y. Julien, Subhas K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Particle-driven gravity currents frequently occur in nature, for instance as turbidity currents in reservoirs. They are produced by the buoyant forces between fluids of different density and can introduce sediments and pollutants into water bodies. In this study, the propagation dynamics of gravity currents is investigated using the FLOW-3D computational fluid dynamics code. The performance of the numerical model using two different turbulence closure schemes namely the renormalization group (RNG) k-ε scheme in a Reynold-averaged Navier-Stokes framework (RANS) and the large-eddy simulation (LES) technique using the Smagorinsky scheme, were compared with laboratory experiments. The numerical simulations focus on two different …

Specification For The Design, Testing, And Utilization Of Industrial Steel Storage Racks, Rack Manufacturers Institute

Rack Manufacturers Institute (RMI) Specifications and Manuals (1984 - 2012)

The standard applies to industrial pallet racks, movable shelf racks, and stacker racks made of cold-formed or hot-rolled steel structural members. It does not apply to other types of racks, such as drive-in or drive-through racks, cantilever racks, portable racks, etc. or to racks made of material other than steel.

The Bridge Newsletter Winter 2012, Missouri University Of Science And Technology

The Bridge Newsletter

-Creating bridge beams that will last 100 years
-Great school, great price
-Recruiting technical minds
-Combatting obesity, diabetes

Computational Modeling Of Baffled Disinfection Tanks, Zachary H. Taylor, Qing Xu, Jordan M. Wilson, Subhas K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The present study focuses on understanding the flow dynamics of baffled disinfection contact tanks through the use of computational fluid dynamics (CFD). In particular, we seek to address the key question: for a given footprint of a contact tank with a fixed inlet configuration, how does the hydraulic efficiency of the tank depend on the configuration of internal baffles? The benchmark contact tank geometry in our study is shown in Figure 1. In order to define guidelines for hydraulically efficient baffle tanks, we perform a total of 36 high-resolution three-dimensional simulations to quantify the efficiency of a laboratory scale tank …

Dendrochemistry Of Multiple Releases Of Chlorinated Solvents At A Former Industrial Site, Jean Christophe Balouet, Joel Gerard Burken, Frank Karg, Don Vroblesky, Kevin T. Smith, Håkan Grudd, Anders Rindby, François Beaujard, Michel Chalot

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Trees Can Take Up and Assimilate Contaminants from the Soil, Subsurface, and Groundwater. Contaminants in the Transpiration Stream Can Become Bound or Incorporated into the Annual Rings Formed in Trees of the Temperate Zones. the Chemical Analysis of Precisely Dated Tree Rings, Called Dendrochemistry, Can Be Used to Interpret Past Plant Interactions with Contaminants. This Investigation Demonstrates that Dendrochemistry Can Be Used to Generate Historical Scenarios of Past Contamination of Groundwater by Chlorinated Solvents at a Site in Verl, Germany. Increment Cores from Trees at the Verl Site Were Collected and Analyzed by Energy-Dispersive X-Ray Fluorescence (EDXRF) Line Scanning. the …

An Experimental Study On Bond Strength Of Reinforcing Steel In Self-Consolidating Concrete, Trevor J. Looney, Mahdi Arezoumandi, Jeffery S. Volz, John J. Myers

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

An experimental investigation was conducted to compare the bond strength of reinforcing steel in self-consolidating concrete (SCC) with conventional concrete (CC). This study investigated two different compressive strengths of SCC as well as CC. the experimental program consisted of 24 pull-out specimens as well as 12 full-scale beams (three for each concrete type and strength). the pull-out specimens were based on RILEM recommendations, and the beam specimens were tested under a simply supported four-point loading condition. the CC test results served as a control and were used to evaluate the results from the SCC pull-out and beam specimen tests. Furthermore, …

Behavior Of Segmental Precast Posttensioned Bridge Piers Under Lateral Loads, Haitham Dawood, Mohamed Elgawady, Joshua Hewes

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Abstract a segmental precast posttensioned (SPPT) bridge pier is an economic recentering structural system. Understanding the seismic behavior of a SPPT system is an important step toward its application in high seismic zones. This paper presents a detailed three-dimensional finite-element (FE) model that was developed using the ABAQUS platform. a brief description and discussion of cyclic tests on eight large-scale SPPT piers is also presented. Four of the piers were constructed and tested to a predefined degree of damage. Then, these piers were retrofitted and retested. the FE models developed and presented in this paper predicted the backbone curves of …

Definition Of Common Conventions For Education Of Cfs System Design, Semih Göksel Yıldırım

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

CFS system of which can be used in the field of low rise residentials, are included in industrialised building systems due to installation principles of the system. Widespreading of the usage of an industrialised building system depends on the widespreading of the system design datum. Therefore, education of CFS system design is required in order to increase the system usage. Also, awareness of CFS system in the levels of public authorities and technical staff can be increased by education. The aim of this paper is to develop an education model for CFS system design by using open building concept. The …

Numerical And Experimental Investigation Of Cold-Formed Steel Double Angle Members Under Compression, W. F. Maia, L. C. M. Vieira Jr., B. W. Schafer, M. Malite

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

This paper presents a numerical and experimental study of double angle members connected by batten plates under concentric and eccentric axial compression. The number of batten plates is varied to study the influence on the nominal axial strength. Numerical analyses are able to accurately predict the behavior and strength found in the experiments, except for long columns under eccentric axial compression where the composite section failed in major-axis flexural buckling. Two design hypotheses are compared to the results obtained: (i) non-composite action (no interaction between angles), with only local, flexural, and flexural-torsional buckling considered; (ii) composite action (full interaction between …

The 1st Student Competition On Cold-Formed Steel Design, Cheng Yu, Cristopher Moen

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

The first Student Competition on Cold-Formed Steel Design (CFS Competition) was held at the University of North Texas in 2011. The CFS Competition was initiated by Cheng Yu through a National Science Foundation CAREER award. The objective of the CFS Competition is to promote higher education in coldformed steel structural design and to encourage students to use creative thinking skills to solve engineering problems. The subject of the first CFS Competition is to design an optimal thin-walled cold-formed steel cross section under several pre-defined restrictions. The CFS Completion received total 78 entries from students in 5 different countries. The judging …

Compression-Tension Hysteretic Response Of Cold-Formed Steel C-Stection Framing Members, D. Padilla-Llano, C. D. Moen, M. Eatherton, L. Mcanallen, T. Bruce

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

This paper summarizes results from an experimental program designed to evaluate the tension-compression cyclic axial response of cold-formed steel C-section structural framing members. A new cyclic loading protocol for cold formed steel members is presented that defines the target axial displacement based on elastic buckling parameters. The protocol is used to explore the cyclic response of members experiencing local buckling, distortional buckling, and global buckling deformation. In the experiments, post-bucking energy dissipation was observed along with tension stretching and softening. The quantity of dissipated energy per cycle increased as cross-section and global slenderness decreased. Specimens experiencing local and distortional buckling …

Towards The Design Of Cold-Formed Steel Foam Sandwich Columns, S. Szyniszewski, B. H. Smith, V. M. Zeinoddini, J. F. Hajjar, S. R. Arwade, B. W. Schafer

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

In this paper a design method for the compressive capacity of sandwich panels comprised of steel face sheets and foamed steel cores is derived and verified. Foamed steel, literally steel with internal voids, provides the potential to mitigate many local stability issues through increasing the effective width-to thickness of the component for the same amount of material. Winter’s classical effective width expression was generalized to the case of steel foam sandwich panels. The provided analytical expressions are verified with finite element simulations employing brick elements that explicitly model the steel face sheets and steel foam cores. The closed-form design expressions …