Open Access. Powered by Scholars. Published by Universities.®

Civil and Environmental Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Missouri University of Science and Technology

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1381 - 1410 of 7869

Full-Text Articles in Civil and Environmental Engineering

A Comparison Of The Bond Behavior Of Pbo-Frcm Composites Determined By Double-Lap And Single-Lap Shear Tests, Lesley Sneed, T. D'Antino, C. Carloni, C. Pellegrino Nov 2015

A Comparison Of The Bond Behavior Of Pbo-Frcm Composites Determined By Double-Lap And Single-Lap Shear Tests, Lesley Sneed, T. D'Antino, C. Carloni, C. Pellegrino

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents the results of an investigation on the bond behavior and stress-transfer mechanism of polyparaphenylene benzo isoxazole (PBO) fiber-reinforced cementitious matrix (FRCM) composites bonded to a concrete substrate using double-lap and single-lap shear tests. Results of double-lap shear tests with different composite bonded lengths and widths are presented and compared with those from single-lap shear tests previously reported by the authors. The idealized load response developed from single-lap shear tests is found to characterize the response of the composite in double-lap shear tests, although with a few key differences. With the double-lap shear test, load redistribution among the …

Go to article

Stable Isotope-Enabled Pathway Elucidation Of 2,4-Dinitroanisole Metabolized By Rhizobium Lichtii, Hunter W. Schroer, Kathryn L. Langenfeld, Xueshu Li, Hans Joachim Lehmler, Craig L. Just Oct 2015

Stable Isotope-Enabled Pathway Elucidation Of 2,4-Dinitroanisole Metabolized By Rhizobium Lichtii, Hunter W. Schroer, Kathryn L. Langenfeld, Xueshu Li, Hans Joachim Lehmler, Craig L. Just

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Recently developed military explosives are safer to handle, but more environmentally mobile, than traditional explosives. The new insensitive munitions, including 2,4-dinitroanisole (DNAN), have been sparsely studied, making the use of bacterial and/or plant-based remediation approaches unfeasible without further information about the transformation of these compounds. To that end, Rhizobium lichtii isolated from willow tree tissues were studied and observed to completely degrade 5 mg L-1 DNAN within 24 h in liquid media with added carbon and nitrogen. The use of DNAN, [13C6] DNAN, and [15N2] DNAN enabled the identification of 11 previously unknown metabolites resulting from sulfation, acetylation, and/or methylation …

Go to article

Rans Modeling Of Stably Stratified Turbulent Boundary Layer Flows In Openfoam®, Jordan M. Wilson, Subhas K. Venayagamoorthy Oct 2015

Rans Modeling Of Stably Stratified Turbulent Boundary Layer Flows In Openfoam®, Jordan M. Wilson, Subhas K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Quantifying mixing processes relating to the transport of heat, momentum, and scalar quantities of stably stratified turbulent geophysical flows remains a substantial task. In a stably stratified flow, such as the stable atmospheric boundary layer (SABL), buoyancy forces have a significant impact on the flow characteristics. This study investigates constant and stability-dependent turbulent Prandtl number (Prt) formulations linking the turbulent viscosity (νt) and diffusivity (κt) for modeling applications of boundary layer flows. Numerical simulations of plane Couette flow and pressure-driven channel flow are performed using the Reynolds-averaged Navier-Stokes (RANS) framework with the standard k-ϵ turbulence model. Results are compared with …

Go to article

Test Standard For Joist Connectors Attached To Cold-Formed Steel Structural Framing, 2015 Edition, American Iron And Steel Institute Oct 2015

Test Standard For Joist Connectors Attached To Cold-Formed Steel Structural Framing, 2015 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Go to article

Test Standard For Cold-Formed Steel Framing -- Nonstructural Interior Partition Walls With Gypsum Board, 2015 Edition, American Iron And Steel Institute Oct 2015

Test Standard For Cold-Formed Steel Framing -- Nonstructural Interior Partition Walls With Gypsum Board, 2015 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Go to article

Test Standard For Through-The-Web Punchout Cold-Formed Steel Wall Stud Bridging Connectors, 2015 Edition, American Iron And Steel Institute Oct 2015

Test Standard For Through-The-Web Punchout Cold-Formed Steel Wall Stud Bridging Connectors, 2015 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Go to article

Code Of Standard Practice For Cold-Formed Steel Structural Framing, 2015 Edition, American Iron And Steel Institute Oct 2015

Code Of Standard Practice For Cold-Formed Steel Structural Framing, 2015 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Go to article

Concrete-Filled-Large Deformable Frp Tubular Columns Under Axial Compressive Loading, Omar I. Abdelkarim, Mohamed Elgawady Oct 2015

Concrete-Filled-Large Deformable Frp Tubular Columns Under Axial Compressive Loading, Omar I. Abdelkarim, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The behavior of concrete-filled fiber tubes (CFFT) polymers under axial compressive loading was investigated. Unlike the traditional fiber reinforced polymers (FRP) such as carbon, glass, aramid, etc., the FRP tubes in this study were designed using large rupture strains FRP which are made of recycled materials such as plastic bottles; hence, large rupture strain (LRS) FRP composites are environmentally friendly and can be used in the context of green construction. This study performed finite element (FE) analysis using LS-DYNA software to conduct an extensive parametric study on CFFT. The effects of the FRP confinement ratio, the unconfined concrete compressive strength …

Go to article

Enhanced Series-Parallel Model For Estimating The Time-Dependent Thermal Conductivity Of Fly Ash Soil Mixtures, Xin Kang, Louis Ge Oct 2015

Enhanced Series-Parallel Model For Estimating The Time-Dependent Thermal Conductivity Of Fly Ash Soil Mixtures, Xin Kang, Louis Ge

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

An enhanced series-parallel (S-II) model of one-dimensional conductive heat flow through a unit cell was developed to estimate the time-dependent thermal conductivity of Class C fly ash stabilized soils. The unit cell is composed of three separate heat flow paths: a continuous path through solid contacts (soil contacts, fly ash contacts, and soil fly ash contacts) in parallel arrangement, a series-parallel path of solids in a series arrangement with a parallel arranged path of solid-miniscule pores (miniscule portion of solid water and miniscule portion of solid air), and a continuous path through water and air in parallel arrangement. The solid-miniscule …

Go to article

The Bridge Newsletter Winter 2015, Missouri University Of Science And Technology Oct 2015

The Bridge Newsletter Winter 2015, Missouri University Of Science And Technology

The Bridge Newsletter

-S&T’s Solar House Design Team sets out to redefine the American housing market
-A monumental anniversary
-Academy awards Sneed
-ASCE honors Holmes

Go to article

Collapse Vulnerability And Fragility Analysis Of Substandard Rc Bridges Rehabilitated With Different Repair Jackets Under Post-Mainshock Cascading Events, Mostafa Fakharifar, Genda Chen, Ahmad Dalvand, Anoosh Shamsabadi Sep 2015

Collapse Vulnerability And Fragility Analysis Of Substandard Rc Bridges Rehabilitated With Different Repair Jackets Under Post-Mainshock Cascading Events, Mostafa Fakharifar, Genda Chen, Ahmad Dalvand, Anoosh Shamsabadi

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Past earthquakes have signaled the increased collapse vulnerability of mainshock-damaged bridge piers and urgent need of repair interventions prior to subsequent cascading hazard events, such as aftershocks, triggered by the mainshock (MS). The overarching goal of this study is to quantify the collapse vulnerability of mainshock-damaged substandard RC bridge piers rehabilitated with different repair jackets (FRP, conventional thick steel and hybrid jacket) under aftershock (AS) attacks of various intensities. The efficacy of repair jackets on post-MS resilience of repaired bridges is quantified for a prototype two-span single-column bridge bent with lap-splice deficiency at column-footing interface. Extensive number of incremental dynamic …

Go to article

Assessment Of Empirical Equations For The Compression Index Of Fine-Grained Soils In Missouri, Site Onyejekwe, Xin Kang, Louis Ge Aug 2015

Assessment Of Empirical Equations For The Compression Index Of Fine-Grained Soils In Missouri, Site Onyejekwe, Xin Kang, Louis Ge

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The use of correlations and empirical relationships in geotechnical engineering provides a fast, cost-effective means of predicting the value of a parameter based on the values of certain other, possibly more easily determined, parameters. The correlation between two or more soil properties has been found to be dependent in varying degrees on soil type, the testing method used to obtain the numerical value of the parameter itself and the homogeneity of the soil. Many empirical correlations among soil properties have been published. These correlations, based on widely sourced data, may not be appropriate for local situations. Hence, there is a …

Go to article

Work In Progress -- Does A Technology-Rich Transportation Engineering Experiences Increase Interest In Civil Engineering, Marissa K. Orr, Sanjay Tewari, David E. Hall, Norman D. Pumphrey Aug 2015

Work In Progress -- Does A Technology-Rich Transportation Engineering Experiences Increase Interest In Civil Engineering, Marissa K. Orr, Sanjay Tewari, David E. Hall, Norman D. Pumphrey

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper examines whether a technology-rich transportation engineering experience generates interest among college freshman students towards transportation related degrees and careers, specifically, whether it increases interest in civil engineering. Louisiana Tech’s first-year engineering experience provides relevant, project-focused education for over 500 students each year and an opportunity to introduce transportation-related projects. The six semester-hour, three-course sequence, called “Living with the Lab,” boosts experiential learning through student ownership of inexpensive laboratory equipment. In one section of the Living with the Lab course, a transportation engineer visited the class and the students were led through a technology-rich transportation engineering activity. They used …

Go to article

Strain Distribution And Crack Detection In Concrete Overlays With Pulse Pre-Pump Brillouin Optical Time Domain Analysis, Yi Bao, Genda Chen Aug 2015

Strain Distribution And Crack Detection In Concrete Overlays With Pulse Pre-Pump Brillouin Optical Time Domain Analysis, Yi Bao, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This report is focused on the measurement of strain distributions and crack detection in unbonded and bonded pavement overlays. The main objectives of this study are: (a) to characterize the strain sensing properties of distributed fiber optic sensors with recently developed pulse pre-pump Brillouin optical time domain analysis (PPP-BOTDA), (b) to develop an installation method for real world applications, (c) to document the performance of the PPP-BOTDA technology in unbonded/bonded pavement applications, and (d) to develop a numerical model to facilitate the analysis of mechanical behavior of unbonded pavement overlay under vehicle wheel loads. A thin concrete layer can be …

Go to article

Accumulation Of Gas-Phase Methamphetamine On Clothing, Toy Fabrics, And Skin Oil, G. Morrison, N. V. Shakila, K. Parker Aug 2015

Accumulation Of Gas-Phase Methamphetamine On Clothing, Toy Fabrics, And Skin Oil, G. Morrison, N. V. Shakila, K. Parker

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

To better understand methamphetamine exposure and risk for occupants of former residential clandestine methamphetamine laboratories, we measured the dynamic accumulation of methamphetamine in skin oil, cotton and polyester (PE) clothing, upholstery, and toy fabric (substrates) exposed to 15-30 ppb (91-183 μg/m3) neutral methamphetamine in air for up to 60 days. The average equilibrium partition coefficients at 30% RH, in units of μg of methamphetamine per gram of substrate per ppb, are 3.0 ± 0.2 for a PE baby blanket, 5.6 ± 3.5 for a PE fabric toy, 3.7 ± 0.2 for a PE shirt, 18.3 ± 8.0 for a PE/cotton …

Go to article

Advancing Seismic Simulation Of Cold-Formed Steel Framed Buildings, American Iron And Steel Institute Jul 2015

Advancing Seismic Simulation Of Cold-Formed Steel Framed Buildings, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The objective of this research is to create a computationally efficient seismic analysis framework for cold-formed steel (CFS) framed-buildings supported by hysteretic nonlinear models for CFS members and screw-fastened connections. Design of CFS structures subjected to lateral seismic forces traditionally relies on the strength of subassemblies subjected to lateral loading of systems, such as strapped/sheathed shear walls and diaphragms, to provide adequate protection against collapse. Enabling performance-based seismic design of CFS buildings requires computationally efficient and accurate modeling tools that predict the nonlinear cyclic behavior of CFS buildings, the individual CFS components and connections. Such models should capture the energy …

Go to article

Chemically Stabilized Soft Clays For Road-Base Construction, Xin Kang, Gi Chun Kang, Kuang Tsung Chang, Louis Ge Jul 2015

Chemically Stabilized Soft Clays For Road-Base Construction, Xin Kang, Gi Chun Kang, Kuang Tsung Chang, Louis Ge

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Soft clays are widely distributed in Missouri, United States. Due to their relatively low strength and high compressibility, subgrade construction in soft clays has encountered many difficulties. In recent practice, the use of fly ash (FA) along with lime to tackle soft subgrade problems has shown promising results. The effectiveness of Class C FA and lime kiln dust (LKD) in clay subgrade stabilization is examined in this research. Scanning electron microscopic (SEM) analysis, proctor compaction tests, unconfined compression tests, and resilient modulus tests were carried out on the FA and LKD modified soil mixtures. Test specimens were prepared at optimum …

Go to article

Recent Advances In Indoor Chemistry, Glenn Morrison Jun 2015

Recent Advances In Indoor Chemistry, Glenn Morrison

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Just as the chemistry creates urban smog and aerosols that influence climate change, chemistry in building air can alter the indoor environment for better or worse. This review focuses on chemical pathways initiated by oxidants that infiltrate from outdoor air and other indoor-sourced reactants and surfaces that make these environments unique chemical reactors. Ozone reacts with fragrance molecules, tobacco smoke residues, and even human skin oils to generate a host of oxidized organic compounds, secondary organic aerosols, and irritants. Nitrous acid is formed on indoor surfaces and is subsequently cleaved by even the relatively dim light indoor. This raises the …

Go to article

Impact Of Modified Inlets On Residence Times In Baffled Tanks, Jeremy S. Carlston, Subhas Karan Venayagamoorthy Jun 2015

Impact Of Modified Inlets On Residence Times In Baffled Tanks, Jeremy S. Carlston, Subhas Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Sharp inlets, although prevalent, tend to reduce mixing efficiency in hydraulic contact tanks by affecting fluid and scalar transport throughout the entire system. Superior inlets are often not an option because of the prohibitive cost of upgrading preexisting tanks. To remedy this, seven inexpensive yet easily implemented attachments to a sharp inlet were tested on a full-scale, baffled, prototypical contact tank. Cumulative residence time distributions of a conservative, passive scalar were obtained for each attachment to assess their performance. A study using computational fluid dynamics of the same tank with the various attachments was then performed to strengthen the empirical …

Go to article

Weak Magnetic Field Accelerates Chromate Removal By Zero-Valent Iron, Pian Feng, Xiaohong Guan, Yuankui Sun, Wonyong Choi, Hejie Qin, Jianmin Wang, Junlian Qiao, Lina Li May 2015

Weak Magnetic Field Accelerates Chromate Removal By Zero-Valent Iron, Pian Feng, Xiaohong Guan, Yuankui Sun, Wonyong Choi, Hejie Qin, Jianmin Wang, Junlian Qiao, Lina Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Weak magnetic field (WMF) was employed to improve the removal of Cr(VI) by zero-valent iron (ZVI) for the first time. The removal rate of Cr(VI) was elevated by a factor of 1.12-5.89 due to the application of a WMF, and the WMF-induced improvement was more remarkable at higher Cr(VI) concentration and higher pH. Fe2+ was not detected until Cr(VI) was exhausted, and there was a positive correlation between the WMF-induced promotion factor of Cr(VI) removal rate and that of Fe2+ release rate in the absence of Cr(VI) at pH 4.0-5.5. These phenomena imply that ZVI corrosion with Fe2+ …

Go to article

Measuring Multidimensional Poverty In A Complex Environment; Identifying The Sensitive Links, L. E. Voth-Gaeddert, Daniel B. Oerther May 2015

Measuring Multidimensional Poverty In A Complex Environment; Identifying The Sensitive Links, L. E. Voth-Gaeddert, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The central hypothesis of this study is that a holistic, systems-based approach employing multiple analytical tools is useful for identifying the most sensitive links within complex communities to down-scale global development priorities such as the United Nations Sustainable Development Goals. Results of latent factor regression, canonical correlation analysis, and structural equation modeling were compared for multiple, publically-available data sets for two rural regions in Brazil and Guatemala. The results of this study confirm previously reported findings, and collectively support the central hypothesis demonstrating a pathway for linking global priorities with the complex realities of 'on-the-ground' development conditions in specific communities.

Go to article

On Turbulent Mixing In Stably Stratified Wall-Bounded Flows, Farid Karimpour, Subhas Karan Venayagamoorthy Apr 2015

On Turbulent Mixing In Stably Stratified Wall-Bounded Flows, Farid Karimpour, Subhas Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this paper, we provide an analysis of turbulent mixing in stably stratified wall-bounded flows to highlight a number of important issues such as prediction of the turbulent viscosity, the turbulent diffusivity, and the irreversible flux Richardson number. By invoking the equilibrium assumption between the production rate of the turbulent kinetic energy (P), the dissipation rate of the turbulent kinetic energy (P), and the turbulent potential energy dissipation rate (εPE) as P ≈ ε + εPE and also assuming equilibrium between the buoyancy flux (B) and εPE as -B ≈ εPE, we first propose that the irreversible flux Richardson number …

Go to article

Load Bearing Clip Angle Design, Cheng Yu, Mohamad Yousof, Mahsa Mahavian Apr 2015

Load Bearing Clip Angle Design, Cheng Yu, Mohamad Yousof, Mahsa Mahavian

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by researchers based on their research findings. The material has also been reviewed by the American Iron and Steel Institute Committee on Specifications for the Design of Cold-Formed Steel Structural Members. The Committee acknowledges and is grateful for the contributions of such researchers. The material herein is for general information only. The information in it should not be used without first securing competent advice with respect to its suitability for any given application. The publication of the information is not intended as a representation or warranty on the part of the American Iron …

Go to article

Load Bearing Clip Angle Design, American Iron And Steel Institute Apr 2015

Load Bearing Clip Angle Design, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The report presents a comprehensive research project aimed at developing design methods for three limit states of cold-formed steel clip angles: shear, compression, and pull-over of the screw connections. For each limit state, a test program was conducted to investigate the behavior, strength, and deflection of the clip angles. The test results were compared with existing design methods for members similar to, but not exactly the same as, cold-formed steel clip angles. It was found that none of the existing methods worked well for the tested clip angles, therefore new design methods were developed for each of the three limit …

Go to article

Consolidation-Induced Solute Transport For Constant Rate Of Strain. Ii: Comparison With Incremental Loading, Patrick J. Fox, Hefu Pu Apr 2015

Consolidation-Induced Solute Transport For Constant Rate Of Strain. Ii: Comparison With Incremental Loading, Patrick J. Fox, Hefu Pu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents a numerical investigation of one-dimensional large strain consolidation-induced solute transport for incremental loading (IL) and constant rate of strain (CRS) conditions. Solute transport accounts for advection, diffusion, dispersion, linear and nonlinear sorption, and equilibrium and nonequilibrium sorption, and is consistent with temporal and spatial variations of porosity and seepage velocity in the consolidating soil. Simulations were conducted using material properties for kaolinite clay and indicate that IL and CRS conditions produce significantly different responses during the course of consolidation, including applied stress, rate of settlement, excess pore pressure, and local strain. However, for a given set of …

Go to article

Consolidation-Induced Solute Transport For Constant Rate Of Strain. I: Model Development And Simulation Results, Hefu Pu, Patrick J. Fox Apr 2015

Consolidation-Induced Solute Transport For Constant Rate Of Strain. I: Model Development And Simulation Results, Hefu Pu, Patrick J. Fox

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A numerical model, called CSTCRS1, is presented for coupled one-dimensional consolidation and solute transport under constant rate of strain (CRS) loading conditions. The consolidation algorithm accounts for vertical strain, general constitutive relationships, relative fluid velocity, changing compressibility and hydraulic conductivity during consolidation, and an external hydraulic gradient. The solute transport algorithm accounts for advection, dispersion, linear and nonlinear sorption, and equilibrium and nonequilibrium sorption. Soil compressibility is rate-independent and as such CSTCRS1 is more appropriate for less-structured soils. The model is based on a dual-Lagrangian framework that separately tracks the motions of sold and fluid phases. The development of CSTCRS1 …

Go to article

Influence Of Portland Cement And Ground-Granulated Blast-Furnace Slag On Bleeding Of Fresh Mix, Hong Jae Yim, Jae Hong Kim, Seong Ho Han, Hyo Gyoung Kwak Apr 2015

Influence Of Portland Cement And Ground-Granulated Blast-Furnace Slag On Bleeding Of Fresh Mix, Hong Jae Yim, Jae Hong Kim, Seong Ho Han, Hyo Gyoung Kwak

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Bleeding occurs when freshly mixed cement-based materials settle in a form, and this phenomenon influences the quality of the fresh state as well as the hardened state. This paper attempts to measure the bleeding of Portland cement and ground granulated blast furnace slag (GGBFS) paste mixtures. To investigate the influence of water-to-powder ratio and the used powders under high pressure on bleeding, a pressure vessel and various types of freshly mixed paste were prepared. The packing density and permeability were measured and discussed to understand material effects on the bleeding phenomenon.

Go to article

Preface, William P. Schonberg Apr 2015

Preface, William P. Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Go to article

A First-Principles-Based Model For Crack Formation In A Pressurized Tank Following An Mmod Impact, William P. Schonberg, J. Martin Ratliff Apr 2015

A First-Principles-Based Model For Crack Formation In A Pressurized Tank Following An Mmod Impact, William P. Schonberg, J. Martin Ratliff

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Most robotic spacecraft have at least one pressurized vessel on board, usually a liquid propellant tank. One of the design considerations of such spacecraft is the anticipation and mitigation of the possible damage that might occur from on-orbit impacts by micro-meteoroids or orbital debris (MMOD). While considerable effort has been expended in the study of the response of non-pressurized spacecraft components to MMOD impacts, relatively few studies have been conducted on the pressurized elements of such spacecraft. In particular, since it was first proposed nearly 45 years ago, NASA's current evaluation methodology for determining impact-induced failure of pressurized tanks has …

Go to article

Factorial Design Approach In Proportioning Prestressed Self-Compacting Concrete, Wu-Jian Long, Kamal Khayat, Guillaume Lemieux, Feng Xing, Wei-Lun Wang Mar 2015

Factorial Design Approach In Proportioning Prestressed Self-Compacting Concrete, Wu-Jian Long, Kamal Khayat, Guillaume Lemieux, Feng Xing, Wei-Lun Wang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In order to model the effect of mixture parameters and material properties on the hardened properties of, prestressed self-compacting concrete (SCC), and also to investigate the extensions of the statistical models, a factorial design was employed to identify the relative significance of these primary parameters and their interactions in terms of the mechanical and visco-elastic properties of SCC. In addition to the 16 fractional factorial mixtures evaluated in the modeled region of -1 to +1, eight axial mixtures were prepared at extreme values of -2 and +2 with the other variables maintained at the central points. Four replicate central mixtures …

Go to article

First Prev Next Last