Civil and Environmental Engineering Commons^™

Future Meteorological Droughts In The Southeastern Us, Kunal Bhardwaj, C. Prakash Khedun, Abdul A. Khan

Journal of South Carolina Water Resources

The Southeastern U.S., despite its humid climate, experiences recurrent meteorological droughts which impact agricultural, water resources, ecological systems, and the economy and society. Knowledge of future drought conditions can guide adaptation efforts. Here, we evaluate historical and projected droughts using the Standardized Precipitation Index (SPI) and the Standardized Precipitation-Evapotranspiration Index (SPEI) computed from an ensemble of eight bias-corrected Global Climate Models (GCMs) from the Climate Model Intercomparison Phase-6 (CMIP6). The historical performance (1950–2014) of the GCM’s mean was benchmarked against gridded observations from the Climate Research Unit (CRU). Future changes were assessed under 1.5°C, 2.0°C, and 3.0°C global warming levels.We …

An Integrated Model For Post-Hurricane Displacement, Shelter Demand And Shelter Allocation, Nirmal Adhikari

All Theses

This thesis develops an integrated tract-level framework for estimating post-hurricane displacement, short-term shelter demand, long-term shelter demand, and shelter allocation under hurricane wind hazards. The framework combines parametric wind-field modeling based on HURDAT2 and EBTRK hurricane data with HAZUS-based fragility and loss functions, uninhabitability relationships, demographic factors, and an insurance-sensitive recovery model. Tract-level insurance adequacy is estimated using American Community Survey data, National Association of Insurance Commissioners premium data, and the National Risk Index, using five scenario-based models; the combined home-value and hazard-risk model is adopted for final analyses. To evaluate post-disaster housing capacity, the study estimates the number of …

Characterization, Transport Modeling, And Image Analysis Of Rover-Terrain Interaction For Lunar Regolith In-Situ Resource Utilization, Luke A. Manolescu

All Theses

NASA has declared a return to the lunar surface and the need and demand for sophisticated In-situ Resource Utilization (ISRU) is the highest in history. ISRU will require regolith excavation, transport, and processing in order to harvest the valuable resources available, support surface operations, and keep astronauts alive. Characterizing the lunar regolith is essential to understanding the mechanical and physical behavior of the material that will be used to construct berms and structurally support astronaut habitats and landers. Any construction on Earth requires an in-depth geotechnical site assessment prior to any construction to rule out any potential site issues that …

Quantifying The Value Of Adaptability: Bridging Real Options Analysis And Adaptable Building Design, Miranda Grice

All Dissertations

As the demands of the built environment continually evolve, buildings are expected to meet changing occupancy needs, or otherwise they become obsolete. Despite positive research on the benefits of adaptable building design, there is a knowledge gap regarding the long-term economic benefits of these designs. Practical methods are needed to determine if premium costs associated with adaptable designs are justified by the economic benefits inherent in adaptability. Therefore, this dissertation provides a discussion on the application of the financial theory of options analysis to the design of adaptable buildings. Additionally, a model and accompanying tool are presented as a solution …

Robustness Of Vision Language Models For Pedestrian Detection Tasks, Ostonya K. Thomas

All Theses

Autonomous vehicle (AV) systems typically employ modular systems in which discrete components handle separate tasks such as perception, computation, and path planning. While flexible, this approach allows errors to propagate and compound across the pipeline, and many AI systems offer little transparency into their internal decision-making. Such limitations are particularly concerning in safety-critical domains where failures can carry lethal consequences. Vision Language Models (VLMs) have emerged as a promising alternative because they support end-to-end implementations that bypass compounding error risks and provide natural language explanations of their outputs. Despite these advantages, prior research has demonstrated that both computer vision systems …

Estimation Of The Mechanical Properties Of South Carolina Timber Piles Using Non-Destructive Evaluation Methods And Experimentally-Informed Models, Aashish Sapkota

All Theses

South Carolina has about 2,600 bridges that are supported by nearly 75,000 timber piles. They are increasingly vulnerable to biological decay, cracking and impact damages after decades of service. Current inspection methods used by the South Carolina Department of Transportation (SCDOT), such as hammer sounding and awl probing, are labor-intensive and expensive. This study investigated non-destructive evaluation (NDE) methods, including micro-resistance drilling and stress wave timing, as alternatives for assessing timber pile condition.

Ten timber piles were collected from two South Carolina bridges, and their above-grade portions were cut into 40 specimens approximately 13 to 15 inches long. Specimens were …

Developing Aero-Floating Treatment Wetland (Aeroftw) Scaffolds: A Non-Plastic Alternative To Conventional Plastic-Based Ftws, Ada C. Montoya Gomez

All Theses

This research was conducted to explore the possibility of constructing floating treatment wetlands (FTWs) without using plastic materials. FTWs are floating platforms that hold plants on the water’s surface, letting roots dangle within the water column, to help remove contaminants from contaminated water, especially in stormwater ponds. Many conventional FTWs are made with plastic components, such as mats and plastic cup containers, which can release microplastics into the environment over time. The goal of this project was to design and test a new type of FTW that does not depend on plastics to support FTW flotation. The study took place …

Robust Hardware Trojan Detection Leveraging Dual‑Domain Features And Stacked Ensemble Learning, Sefatun-Noor Puspa

All Theses

In Cyber-physical systems rely on sensors, communication, and computing, all powered by integrated circuits (ICs). These ICs are vulnerable to malicious hardware attacks, with hardware Trojans being one of the stealthiest threats. Trojans are malicious implants in the circuitry, which are often inserted during design or fabrication stages. This stealthy addition remains dormant until triggered and might cause functional disruptions or sensitive information leakage once triggered. Traditional IC validation methods, such as functional testing and logic analysis, usually fail to capture these subtle anomalies because hardware Trojans are intentionally designed to mimic normal circuit behavior. They often remain dormant under …

Field Testing Of Retrofits To Improve The Structural Behavior Of South Carolina Flat-Slab Bridges, Jacob Bowers

All Theses

The South Carolina Department of Transportation manages approximately 2,300 “flat-slab” bridges statewide, with an average age of 58 years, according to the National Bridge Inventory (NBI 2024). Many of these structures were originally designed for H10 or H15 truck loadings, which are significantly below current design standards. As a result, numerous bridges have been load-posted, restricting freight movement, emergency response, and local connectivity. While full replacement provides a long-term solution, it is often cost-prohibitive and disruptive. Accordingly, the South Carolina Department of Transportation is seeking cost-effective retrofit strategies that improve performance and extend the service life of these bridges. Implementing …

Investigation Of Low-Pressure Mercury Lamp System Configurations And Xenon Excimer Lamp System Development As Vacuum Ultraviolet Sources For Optimal Photolytic Degradation Of Poly-/Perfluoroalkyl Substances, Eman Zuhair Alhamdan

All Dissertations

PFAS are persistent synthetic chemicals, with unique properties that enable them to easily enter and accumulate in water sources. Their public health impacts have raised concern and highlighted the need for effective treatment. Numerous techniques for PFAS removal from water have been studied, few have proven the ability of breaking down PFAS rather than separating and concentrating it. Many of these methods are chain-length dependent, showing slower degradation rate of short-chain PFAS and requiring substantial amounts of energy, and chemical agents that may produce byproducts.

Among available PFAS destruction methods, direct photolysis by high-energy UV with wavelength below 200 nm …

What Is Passive And Active Release Retrofitting Rainwater Harvesting Systems?, Sarah E. Waickowski, Amy E. Scaroni, Beatriss H. Calhoun

Forestry and Natural Resources

Rainwater harvesting is the collection and temporary storage of rainwater for non-potable applications and stormwater management. Rainwater harvesting systems can be retrofitted with passive or active release to improve how well the systems manage stormwater runoff. This publication contains information that may be useful to municipalities, stormwater professionals, rainwater harvesting system owners and/or managers, homeowner associations, and stormwater educators, among others, on what is passive and active release, including their benefits and where to find more information.

Nahb Production Home Competition As A Learning Tool Towards Incorporating Business Skills In Construction Management Programs, George Berghorn, Chandler Jones, M.G. Matt Syal

The Professional Constructor

There is a growing realization in the construction industry that the traditional focus of Construction Management (CM) education on technical competencies (such as scheduling, estimating, and construction methods) is insufficient in preparing graduates to meet the strategic and leadership demands of the modern construction profession. A successful construction company requires more than project execution; it demands expertise in business development, financial management, marketing, risk management, and organizational leadership. The disparity between the technical and business aspects of CM education has produced graduates who may succeed in project management yet find it challenging to engage with comprehensive business operations.

This study …

Construction Industry Preparedness For Generation Z And Millennials: Aligning Industry Characteristics With Workforce Job Preferences, Ameenullah Amiri, Dhaval R. Gajjar, Jason D. Lucas

The Professional Constructor

The construction industry in the United States suffers from workforce shortages, partly due to younger generations being hired more slowly than baby boomers retire. Generation Z’s (Gen Z) lack of interest in joining the construction industry, coupled with the retirement of older workers, has amplified the problem. This paper investigates existing literature to identify the work and career preferences of Gen Z and Millennials and determine where the industry may focus efforts to attract these two generations. Through a systematic literature review, this study identified overlaps and gaps between the current construction industry workforce’s perceptions of the industry and the …

Heat-Related Injuries And Fatalities In Roofing: Osha Investigations From 2003-2024, Kenneth S. Sands Ii, Benjamin Marshall

The Professional Constructor

This study examines 52 heat-related roofing incidents recorded by the Occupational Safety and Health Administration (OSHA) between 2003-2024 to describe patterns in outcomes and identify trade-specific prevention opportunities. Researchers built a structured dataset from OSHA investigation summaries and analysed frequencies of the incidents and their associations with month, time of day, project type, end use, and age to complement a thematic review of narrative abstracts. Fifty-eight percent of cases were fatalities, with the remainder split between hospitalized and non-hospitalized injuries; these statistics underscore the consequences of heat events that trigger OSHA reporting. There was a clear relationship between number of …

The Development Of A Convenient And Consistent Methodology For Flight Proficiency To Certify Multi-Rotor Uas Pilots For State Departments Of Transportation, Colin H. Dees, Joseph M. Burgett

The Professional Constructor

To fly an unmanned aircraft system (UAS), commonly referred to as a “drone,” the Federal Aviation Administration (FAA) requires pilots to pass a knowledge test. There is no requirement at the state or federal level for drone operators to demonstrate the ability to operate a UAS. The National Institute of Science and Technology (NIST) has created an exam for public and private entities to assess basic UAS flight proficiency. It is the only nationally recognized flight proficiency protocol. NIST does not provide a scoring recommendation and leaves it to the user to determine the minimum criteria to pass. There is …

The Professional Constructor, Full Issue

The Professional Constructor

Full Issue, Winter 2026

Volume 50, Number 01

Comparison Of The Recent Icrp Occupational Intakes Of Rradionuclides Series To Annual Limits On Intake (Ali) In The United States For Select Radionuclides, Aidan B. Barker

All Theses

Dose coefficients (DCs) and secondary limit values (such as the annual limit on intake [ALI] and derived air concentration [DAC]) are useful and convenient quantities in radiation protection (RP) for estimation of radiological dose and the practical application of dose limits. DCs link radioactivity intake to dose while secondary limit values express a dose limit in terms of the type and extent of exposure. The International Commission on Radiological Protection (ICRP), an international organization which provides guidance and recommendations for RP, calculates, tabulates, and updates DCs following new findings and updated knowledge relevant to dose determination (e.g. improved human biokinetics, …

Digital Solutions For Bridging Language Barriers: Designing And Testing An App For Construction Spanish Safety Communication On Construction Jobsites, Adrian Cappella

All Theses

Language barriers between English-speaking supervisors and Spanish-speaking workers create safety risks on U.S. construction jobsites. Hispanic workers face higher injury and fatality rates, with miscommunication being a major contributing factor. Existing translation tools lack the accuracy, cultural context, and jobsite relevance needed for effective safety communication.

In this study a mobile application with construction-specific safety phrases in English and Spanish was designed and field tested. The research included a literature review, phrase collection and validation with industry experts, application development and design with a computer science collaborator, and usability testing with supervisors and workers. Surveys and field trials measured navigation, …

Accident Data Analytics And Ai-Based Auditory Enhancement For Highway Construction Safety, Thinh Nguyen

All Dissertations

This research develops data-driven and AI-enhanced approaches to improve worker safety in highway construction environments. The study integrates advanced analytics and auditory signal enhancement to identify high-risk worker behaviors and improve real-time safety warnings. The work consists of three core studies. The first study applies Sequential Pattern Mining and Social Network Analysis to more than 1,000 construction accident reports to identify high-risk worker actions and their hidden sequential relationships with accident types and consequences. These insights reveal sector-specific risk patterns, supporting the creation of targeted, data-informed safety interventions. The second study introduces an AI-based auditory enhancement model built on a …

Experimental Determination Of Modulus Of Rupture For Concrete Masonry Beams And Implications For The Tms 402/602 Code, Shreedhar K C

All Theses

Currently, the experimental database for Modulus of Rupture (MOR) of masonry beams is limited, and current provisions in TMS 402/602-22 use the MOR values from wallette tests. The primary goal of this research is to experimentally determine the parameters that influence MOR. The secondary goal of this work is to compare the MOR values from beam and bond wrench tests obtained in this study with each other as well as with values published in the literature. The standard ASTM E518 test was used for determining MOR values for beams, and a modified approach to ASTM C1072 that nullifies the eccentricity …

Dynamic Topology Optimization And Experimental Validation Of Reinforcement For Pcb Robotics, Ryan G. Semler

All Theses

Ongoing research between Clemson University and the NASA Jet Propulsion Laboratory (JPL) has been conducted to characterize and assess rigid-flex printed circuit board (PCB) robotics subjected to dynamic loads. A lightweight, PCB lunar rover, PUFFER (Pop-Up Flat Folding Explorer Robot), was designed by NASA JPL for Mars missions, but its deployment for lunar missions has been investigated as well. Its current architecture, however, is insufficient for navigating and surviving the lunar environment, and reinforcement has been recommended as a solution to protect larger panels.

This research work presents a dynamic topology optimization process for PCB panel reinforcement. A thorough literature …

Surface Reaction And Transportation Of Radium-226 In Marine Systems, Jiusi Wang

All Dissertations

Historical uses of radium (Ra)-containing self-luminous paint, such as on gauges and dials in naval ships, have led to the potential for such paint, and thus Ra, to be released into the marine environment. Radium-226 (²²⁶Ra) behavior in marine systems is not fully described in the literature, presenting a knowledge gap in the process of evaluating potential ecological impact of Ra in marine systems. This study explores various mechanisms contributing to Ra environmental transport in marine systems on a laboratory scale, including leaching, sorption, and diffusion. ²²⁶Ra leaching from watch hand dials containing radioactive luminous paint is …

Advancing Life Cycle Assessment Of Mass Timber: Environmental Performance, Circular Design And End-Of-Life Strategies, Muzan Williams Ijeoma

All Dissertations

Mass timber has emerged as a leading candidate for low-carbon construction, offering the dual benefits of reduced embodied emissions and biogenic carbon storage. Yet, fully realizing its sustainability potential requires a comprehensive and context-specific understanding of its environmental performance across the entire life cycle, from raw material production to building operation and beyond end-of-life (EoL). This dissertation advances life cycle assessment (LCA) practices for mass timber by addressing critical challenges across multiple phases of its life cycle. This dissertation is comprised of three published papers, and two submitted manuscripts. First, I conducted a critical review and meta-analysis of mass …

Truck Drivers And Autonomous Trucks: A Topic Modeling Analysis Of Truck Driver Posts, Noah Britt, Amy M. Schuster, Shubham Agrawal, Chu-Hsiang Chang, Jenna A. Van Fossen, Elizabeth A. Mack, Sheila R. Cotten

Publications

Social media provides a rich, alternative data source to interviews or survey-based research to study hard-to-reach populations (e.g., truck drivers, because of their transient work structure and unique subculture). This study uses public social media posts from the largest trucking forum in the United States to examine truck drivers’ views on autonomous trucks (ATs), which are poised to transform the trucking industry. We expand on traditional qualitative strategies of analyzing social media data by combining newer methods, including BERT-based topic modeling, sentiment analysis, stance detection, emotion analysis, topic similarity, and location analysis through a social interaction network, to analyze a …

An Inference Approach For Assessing Place-Based Vulnerability To Heat Mortality, Junkang Xu, Chao Fan, Xing Xu, Haoying Han

Publications

A global increase in the frequency, severity, and scale of extreme heat raises concerns about human vulnerability to climate change and associated mortality. Heat vulnerability and mortality have largely been studied separately, lacking an understanding of their causation. Here, we create a non-parametric generalized inference approach that links socioeconomic, environmental, and infrastructure factors articulated in vulnerability theory and heat mortality between 2010 and 2020 for counties across the United States. We find that the lack of vegetation coverages drives mortality in the Southern U.S. and among Hispanic people. Limited air conditioning is a key factor in heat-related mortality among White …

Life Cycle Assessment Of Sustainable Wastewater Systems - Algae-Based Wastewater Treatment, Harish Lakshmi Srinivasan

All Theses

This thesis studies the integration of an algae-based membrane bioreactor (MBR) and photobioreactor system into a domestic wastewater treatment facility, using the Clemson University WWTP as a reference plant. The proposed system replaces the conventional sequencing batch reactor and aerobic digester with a microalgae-bacteria symbiosis process, coupled with submerged ceramic membranes, an algal photobioreactor and anaerobic digestion for enhanced nutrient and energy recovery, which paves the way for water reuse and increased biological capacity in the future.

The study shows that overall energy consumption is reduced by approximately 18% compared to the existing conventional configuration. Further, methane production from anaerobic …

Evaluating (Bio)Degradation Of Carbon Tetrachloride In Fe(Iii)-Reducing Environments, Adam Rogers

All Theses

Understanding degradation of carbon tetrachloride in-situ is vital for many remediation projects across the world, yet conclusive evidence of its feasibility is lacking in previous studies.

The main objective of this research is to assess the potential for carbon tetrachloride attenuation by biological, abiotic, and combined processes in a Fe(III)-reducing aquifer. In doing so, it assesses the effect of pH and stoichiometric ratio on abiotic degradation of carbon tetrachloride using various reducing agents, evaluates iron-mediated versus direct biotic degradation of carbon tetrachloride using pure cultures under resting and growth conditions, and characterizes the effects of culture strain, electron acceptors and …

Evaluating The Impact Of Activated Carbon On The Biodegradation Of Btex Compounds, Megan Barkley

All Theses

BTEX compounds—benzene, toluene, ethylbenzene and xylenes—are toxic, volatile, aromatic hydrocarbons. They are primarily found in petroleum products and can easily enter the environment. Typical remediation techniques include sorption to activated carbon, pump and treat, and bioremediation. Research suggests that combining sorption to activated carbon and bioremediation may enhance BTEX removal. This study evaluates the impact of granular activated carbon (GAC) on the biodegradation of ethylbenzene and toluene, using an enrichment culture of aerobic bacteria.

The main objectives of this study are to grow and maintain a culture that degrades BTEX compounds, evaluate the effect of activated carbon on the biodegradation …

Life Cycle Assessment Of The Cultivation Of Lettuce In A Hydroponic System Using The Nutrient Film Technique, Raquel Jordan

All Theses

Hydroponic systems are an emerging method of soilless crop cultivation typically done inside a greenhouse where nutrients are delivered dissolved in water rather than being supplied from the soil. Potential benefits of hydroponic systems include reduced irrigation requirements, higher crop yield per area, and the ability to grow crops year-round in nontraditional areas such as urban settings, cold climates, and sites with contaminated soil. However, hydroponic systems tend to have high energy requirements for lighting and climate control, which can yield significant environmental impacts. To explore the environmental impacts of cultivating lettuce in a nutrient film technique (NFT) hydroponic system, …

Effectiveness Of Electrosynthesized Hydrogen Peroxide In Urease Inactivation For Stabilization Of Source-Separated Urine To Recover Urea, Brooke E. Covert

All Theses

The practice of separating urine at a building scale, rather than mixing with domestic wastewater to be treated at water resource recovery facilities, allows for concentrated urine to be directly treated with the aim of resource recovery. However, source separation and treatment present challenges during separation, storage, and transport. This study evaluated the use of hydrogen peroxide-producing electrochemical cells, which represent a technology that uses electricity as an input, to stabilize urine through cathodically produced peroxide to enable downstream water and nutrient recovery. The electrochemical cells have been previously shown to stabilize urine with electrochemically produced peroxide as an effective …