Open Access. Powered by Scholars. Published by Universities.®

Civil and Environmental Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Chulalongkorn University

Discipline
Keyword
Publication Year
Publication
Publication Type

Articles 421 - 450 of 788

Full-Text Articles in Civil and Environmental Engineering

Ozone Formation Potential Of Ambient Volatile Organic Compounds At Roadside In Bangkok, Thailand, Narita Fakkaew, Surat Bualert, Thunyapat Thongyen, Thitima Rungratanaubon Jan 2021

Ozone Formation Potential Of Ambient Volatile Organic Compounds At Roadside In Bangkok, Thailand, Narita Fakkaew, Surat Bualert, Thunyapat Thongyen, Thitima Rungratanaubon

Applied Environmental Research

Volatile organic compounds (VOCs) play an important role in atmospheric chemistry due to their high reactivity—reacting photochemically with oxides of nitrogen (NOx) in the presence of solar radiation forming tropospheric ozone (O3). Each VOC species have different effects on ozone formation according to the rates and pathways of their reactions. The objective of this study aims to examine ozone formation from the estimation of ozone formation potential (OFP). The observation of 29 VOCs species was carried out in the urban area near the roads of Bangkok, Thailand. Measurements were carried out during the dry season, from 16th February to 15th …


Fire Drivers Affecting Forest Fire Occurrences In The Tropical Mixed Broad-Leaved Forests Of Nepal, Krishna Bahadur Bhujel, Rejina Maskey Byanju, Ambika P. Gautam, Ramesh Prasad Sapkota, Udhab Raj Khadka Jan 2021

Fire Drivers Affecting Forest Fire Occurrences In The Tropical Mixed Broad-Leaved Forests Of Nepal, Krishna Bahadur Bhujel, Rejina Maskey Byanju, Ambika P. Gautam, Ramesh Prasad Sapkota, Udhab Raj Khadka

Applied Environmental Research

Forest fires triggered by various natural and anthropogenic drivers are increasing and threatening forest ecosystems across the globe. In Nepal, the high value Tropical Mixed Broad-leaved Forests are prone to fire caused by both natural and anthropogenic drivers. Thus, understanding fire drivers and their effect is important for the sustainable forest fire management. However, the preceding studies on forest specific fire drivers and their effect are limited. This research has identified the fire drivers and assessed their effect to fire occurrences in the Tropical Mixed Broad-leaved Forests of Nawalparasi District, Nepal. Fire drivers were identified and prioritized by participatory approaches. …


Life Cycle Assessment Of Ethiopian Cement Manufacturing: A Potential Improvement On The Use Of Fossil Fuel In Mugher Cement Factory, Lemma Beressa, Battula Vijaya Saradhi Jan 2021

Life Cycle Assessment Of Ethiopian Cement Manufacturing: A Potential Improvement On The Use Of Fossil Fuel In Mugher Cement Factory, Lemma Beressa, Battula Vijaya Saradhi

Applied Environmental Research

The use of imported fuel in the Ethiopian cement industry increased the cost of production and the environmental burden, necessitating intervention. The greenhouse gas (GHG) emission, energy usage intensity, and resource exploitation of Ethiopian cement production were evaluated using the life cycle impact assessment (LCA) tool, aiming to recommend improvements. The LCA study used cumulative energy demand (CED) and Intergovernmental Panel on Climate Change (IPCC) 2006 life cycle impact assessment (LCIA) methods. For the case study of Mugher cement factory (MCF), the results on energy use intensities showed 3.74, 3.67, and 2.64 GJ/ton of clinker, Ordinary Portland cement (OPC), Pozzolana …


Critical Factors And Their Correlation Affecting Green Industry Performance: Evidences From Small And Medium Enterprises, Phurita Noranarttakun, Chanathip Pharino Jan 2021

Critical Factors And Their Correlation Affecting Green Industry Performance: Evidences From Small And Medium Enterprises, Phurita Noranarttakun, Chanathip Pharino

Applied Environmental Research

Large companies have achieved excellent progress toward green production while small and medium enterprises (SMEs) showed limited progress. This research aims to investigate key factors affect different stages of enhancing green industry implementation particularly in SMEs. This study conducted a systematic analysis to offer recommendations to unlock the inhibitors of the green industry. The electronic products and electrical equipment manufacturing industry in Thailand was chosen as a case study. Questionnaire is the main approach to collect primary data from SMEs. The structural equation model is developed to examine correlation and the degree of influencing factors. The model indicated that the …


Why Should Different City Characteristics Customize The Rate Of Pollution Charge? Evidence Of Factors Affecting Willingness-To-Pay For Wastewater Management In Thailand, Kwanmanas Meethavorn, Chanathip Pharino Jan 2021

Why Should Different City Characteristics Customize The Rate Of Pollution Charge? Evidence Of Factors Affecting Willingness-To-Pay For Wastewater Management In Thailand, Kwanmanas Meethavorn, Chanathip Pharino

Applied Environmental Research

A challenge for wastewater management is enhancing the efficiency of resource allocation. Polluter Pays Principle is a wastewater charge collection approach that could help support the financial burden faced by many countries. Tailor-made policy implementation based on city characteristics is critical to the success of implementing a national policy to fit well in different local contexts. This study examined gaps for improving municipal wastewater management systems in Thailand through in-depth interviews and a questionnaire survey to identify the factors influencing households’ perception and willingness to pay in three different cities. A contingent variation method technique was used to evaluate the …


Centuries Of Heat Waves Over India During 20th And 21st Century, Naveena Neelam, Gubbala C. Satyanerayana, Kotla S. Rao, Nandivada Umakantha, Dharma Raju Jan 2021

Centuries Of Heat Waves Over India During 20th And 21st Century, Naveena Neelam, Gubbala C. Satyanerayana, Kotla S. Rao, Nandivada Umakantha, Dharma Raju

Applied Environmental Research

An assessment of temperature extremes is made for the Indian subcontinent to identify the changes since 1951 to 2015, and for the future climate periods till 2100 for all the 21 CMIP5 (Coupled Model intercomparision Project phase 5) models and the representative concentration pathways RCP4.5 and RCP8.5 were examined for the period from 1 March to 31 May to characterize the heat waves in future climates and mean maximum and mean minimum bias were evaluated for the Indian subcontinent. Later two highest recorded temperature regions were chosen Northwest & Central India (NW&CIN) and only central India (CIN) box and the …


Source Contribution Of 1,3 Butadiene In The Vicinity Of Petrochemical Industrial Area, Nuttakit Sukjit, Sarawut Thepanondh, Suphaphat Kwonpongsagoon, Wanida ๋Jinsart, Lalidaporn Punya, Pattaranan Hanma Jan 2021

Source Contribution Of 1,3 Butadiene In The Vicinity Of Petrochemical Industrial Area, Nuttakit Sukjit, Sarawut Thepanondh, Suphaphat Kwonpongsagoon, Wanida ๋Jinsart, Lalidaporn Punya, Pattaranan Hanma

Applied Environmental Research

Emissions and ambient concentrations of 1,3 butadiene released from the synthetic rubber industries in the largest petroleum and petrochemical complex in Thailand were evaluated in this study. The industrial emissions in this analysis were those emitted from process fugitive, combustion stack, flare, and wastewater treatment facility. It was found that wastewater treatment units were the largest emission source among other potential sources. The contribution of emission from wastewater treatment plants were about 92% of total 1,3 butadiene emission. The extent and magnitude of 1,3 butadiene in ambient air were further evaluated through the simulation of AERMOD dispersion model using these …


Land Cover Classification Based On Uav Photogrammetry And Deep Learning For Supporting Mine Reclamation: A Case Study Of Mae Moh Mine In Lampang Province, Thailand, Tejendra K. Yadav, Polpreecha Chidburee, Nattapon Mahavik Jan 2021

Land Cover Classification Based On Uav Photogrammetry And Deep Learning For Supporting Mine Reclamation: A Case Study Of Mae Moh Mine In Lampang Province, Thailand, Tejendra K. Yadav, Polpreecha Chidburee, Nattapon Mahavik

Applied Environmental Research

Detailed, accurate, and frequent mapping of land cover are the prerequisite regarding areas of reclaimed mines and the development of sustainable project-level for goals. Mine reclamation is essential as the extractive organizations are bounded by-laws that have been established by stakeholders to ensure that the mined areas are properly restored. As databases at the mines area become outdated, an automated process of upgrading is needed. Currently, there are only few studies regarding mine reclamation which has less potential of land cover classification using Unmanned Aerial Vehicle (UAV) photogrammetry with Deep learning (DL). This paper aims to employ the classification of …


Quantifying Avoidable Food Waste And Identifying Its Underlying Causes: A Case Study Of A University Dormitory In Thailand, Shimpei Iwasaki, Suphat Prasopsin, Thamarat Phutthai Jan 2021

Quantifying Avoidable Food Waste And Identifying Its Underlying Causes: A Case Study Of A University Dormitory In Thailand, Shimpei Iwasaki, Suphat Prasopsin, Thamarat Phutthai

Applied Environmental Research

To develop well-planned and effective policies and programs for reducing avoidable food waste, it is important to quantify the actual food waste level in particular settings and assess relationships among consumers’ awareness, attitudes, and behaviors. Recognizing these considerations, this paper measured avoidable food waste generated by university students living in dormitory buildings and identified its underlying causes in the case of Kanchanaburi campus, Mahidol University, Thailand. The study applied a food waste composition survey 18 times between January and May 2019 while administering questionnaires in October 2019 to the dormitory students. Based on these measures, the study identified 1,417 instances …


Environmental Degradation-Education Nexus In Malaysia, Wong Sing Yun Jan 2021

Environmental Degradation-Education Nexus In Malaysia, Wong Sing Yun

Applied Environmental Research

This study aims to examine the role of education on CO2 emissions in Malaysia from 1974 to 2014. The unit root tests indicated that the variables were integrated in the same order. As such, the Johansen Co-integration Approach can be employed in this empirical analysis to analyze the impacts of the selected variables. The long-run estimation revealed that economic growth (GDP) and energy consumption (ENERGY) has a negative effect on CO2 emissions. Meanwhile, secondary school education (EDU) demonstrated a significant positive relationship with environmental degradation in the long-run. This can be inferred that secondary school education has a negative effect …


Parking Problems And Policies In Bangkok: Issues, Causes, And Implications, Chakaphan Chullabodhi Jan 2021

Parking Problems And Policies In Bangkok: Issues, Causes, And Implications, Chakaphan Chullabodhi

Chulalongkorn University Theses and Dissertations (Chula ETD)

Parking policies are integral to promoting sustainable urban mobility and enhancing a city's livability as they can shift people's movement toward more sustainable modes. However, Bangkok still lacks a concrete parking policy. The existing one consists primarily of regulations and standards that help reduce traffic congestion, albeit without well-defined policy objectives. This study examines the current problems of on-street and off-street parking policies, investigates the root causes of parking issues, and establishes a parking policy that supports the city's development of sustainable mobility. We used a modified conceptual framework comprising the Iceberg Model of analysis and the Political Economics Analysis …


Removal Of Ferrous And Arsenic From Contaminated Groundwater By Co-Precipitation Coupling With Membrane Separation Process, Bonita Pen Jan 2021

Removal Of Ferrous And Arsenic From Contaminated Groundwater By Co-Precipitation Coupling With Membrane Separation Process, Bonita Pen

Chulalongkorn University Theses and Dissertations (Chula ETD)

This work aimed to​ treat contaminated groundwater with arsenic and ferrous iron pollutants to be drinking water standard following by WHO by co-precipitation process and membrane separation process. The relative effect of different solid media types (scouring sponge, scouring pad, plastic ring, and activated carbon foam) and operating conditions on oxygen mass transfer coefficient (KLa) and hydrodynamic bubble parameters was studied. The optimization process of ferrous oxidation and arsenic removal was observed by Design of Experiment (DOE) with Central Composition Design of Response Surface Methodology (CCD-RSM). Lastly, separation process was experimented with conventional process and membrane technology, i.e., settling process, …


การใช้วัสดุเหลือใช้จากอุตสาหกรรมแกรนิตในคอนกรีต กระตุ้นด้วยสารละลายด่างเสริมเส้นใยเหล็ก, พลยุทธ ทองผาสุก Jan 2021

การใช้วัสดุเหลือใช้จากอุตสาหกรรมแกรนิตในคอนกรีต กระตุ้นด้วยสารละลายด่างเสริมเส้นใยเหล็ก, พลยุทธ ทองผาสุก

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้มีวัตถุประสงค์เพื่อศึกษาอิทธิพลของเศษหินแกรนิตและเส้นใยเหล็กต่อสมบัติเชิงกลของคอนกรีตที่กระตุ้นด้วยสารละลายด่างภายใต้อุณหภูมิปกติและอุณหภูมิสูง มวลรวมรีไซเคิลจากเศษหินแกรนิตถูกนำมาใช้แทนที่ทรายธรรมชาติในปริมาณร้อยละ 0 และ 100 โดยน้ำหนัก และมีการเสริมกำลังของวัสดุด้วยเส้นใยเหล็กในปริมาณร้อยละ 0, 1, และ 2 โดยปริมาตรของคอนกรีต ผลการทดสอบพบว่าค่าการไหลแผ่มีค่าลดลงเมื่อแทนที่ด้วยเศษหินแกรนิต เช่นเดียวกับการเพิ่มปริมาณเส้นใยเหล็กส่งผลให้ค่าการไหลแผ่ลดลง ค่ากำลังรับแรงอัดของคอนกรีตที่ใช้เศษหินแกรนิตและทรายธรรมชาติมีค่าใกล้เคียงกันในทุกอายุการบ่ม (7, 28 และ 90 วัน) และเมื่อเพิ่มปริมาณเส้นใยเหล็กส่งผลให้ค่ากำลังอัด กำลังรับแรงดัด และความเหนียวของวัสดุมีค่าเพิ่มขึ้นตามปริมาณเส้นใยเหล็ก โดยกำลังอัด กำลังรับแรงดัด และความเหนียวมีค่าสูงที่สุดเมื่อใช้ปริมาณเส้นใยเหล็กร้อยละ 2 โดยปริมาตรของคอนกรีต สำหรับการทดสอบหลังเผาไฟ 60 นาที พบว่า ค่ากำลังรับแรงอัดคงค้างของคอนกรีตที่ใช้มวลรวมเศษหินแกรนิตมีค่าใกล้เคียงกับคอนกรีตที่ใช้ทรายธรรมชาติ ในขณะที่กำลังรับแรงดัดของคอนกรีตที่ใช้มวลรวมเศษหินแกรนิตมีค่ามากกว่าคอนกรีตที่ใช้ทรายธรรมชาติ นอกจากนี้การเสริมเส้นใยยังช่วยเพิ่มกำลังอัดและกำลังดัดคงค้างหลังเผาไฟของคอนกรีตได้


วิธีการจัดการของเสียแผงพลังงานแสงอาทิตย์ชนิดผลึกซิลิกอนจากโรงไฟฟ้าพลังงานแสงอาทิตย์ที่เหมาะสมสำหรับประเทศไทย, อิงฉัตร สุภาพยาม Jan 2021

วิธีการจัดการของเสียแผงพลังงานแสงอาทิตย์ชนิดผลึกซิลิกอนจากโรงไฟฟ้าพลังงานแสงอาทิตย์ที่เหมาะสมสำหรับประเทศไทย, อิงฉัตร สุภาพยาม

Chulalongkorn University Theses and Dissertations (Chula ETD)

นับตั้งแต่ปี พ.ศ. 2545 ประเทศไทยเริ่มมีการลงทุนผลิตไฟฟ้าจากแผงพลังงานแสงอาทิตย์ และมีการติดตั้งใช้งานเพิ่มขึ้นต่อเนื่องโดยเฉพาะแผงในกลุ่มผลึกซิลิกอน ในอนาคตประเทศไทยมีแนวโน้มที่จะเผชิญกับปัญหาจากของเสียแผงในปริมาณมาก ดังนั้นงานวิจัยนี้จึงมีวัตถุประสงค์เพื่อการคาดการณ์ปริมาณของเสียแผง และประเมินแนวทางการจัดการของเสียแผงชนิดผลึกซิลิกอน ผลการดำเนินงานพบว่าปริมาณของเสียแผงสะสมที่จะเกิดขึ้น ในปี พ.ศ. 2582 จากทั้ง 2 มุมมอง (1. แผงหมดอายุการใช้งานเมื่อครบ 20 ปี 2. แผงที่ชำรุดรวมกับแผงหมดอายุการใช้งานเมื่อครบ 20 ปี) มีปริมาณอยู่ในช่วง 237,394 - 322,856 ตัน ซึ่งเป็นกระจกมากเกินครึ่งของปริมาณของเสียที่เกิดขึ้นสะสมอยู่ในช่วง 163,921 – 222,932 ตัน สำหรับวัสดุพอลิเมอร์ (วัสดุห่อหุ้ม แผ่นปิดด้านหลัง และซิลิโคน) มีปริมาณรวมกันอยู่ในช่วง 31,384 – 42,682 ตัน และจากการประเมินแนวทางการจัดการทั้ง 3 (1.แนวทางที่ใช้ในปัจจุบัน 2.แนวทางการบดหยาบ 3.แนวทางการอบแยก) พบว่าทุกแนวทางมีรายได้มากกว่าต้นทุนการจัดการเบื้องต้น แสดงให้เห็นถึงความเป็นไปได้ของระบบเศรษฐกิจหมุนเวียน และในแนวทางการอบแยกที่มีการใช้ความร้อนจะทำให้เกิดการสลายตัวของวัสดุพอลิเมอร์ ในรูปค่าความร้อนของเชื้อเพลิง โดยวัสดุห่อหุ้มมีค่าความร้อนมากที่สุดอยู่ในช่วง 38.46 – 40.54 เมกะจูลต่อกิโลกรัม (มีค่าใกล้เคียงกับไบโอดีเซล 40.2 เมกะจูลต่อกิโลกรัม) มีโอกาสที่จะนำเอาพลังงานที่เกิดขึ้นกลับคืนมาใช้ในกระบวนการ เพื่อช่วยลดการใช้เชื้อเพลิง และจากการนำกลับของวัสดุในปริมาณที่มากที่สุด จะช่วยชดเชยผลกระทบทางสิ่งแวดล้อมที่เกิดขึ้น ถือเป็นเครดิตที่เกิดขึ้นจากการประเมินผลกระทบสิ่งแวดล้อม


Structural Optimization Under Limited Natural Frequency Constraints Using Comprehensive Learning Phasor Particle Swarm Optimization, Ei Cho Pyone Jan 2021

Structural Optimization Under Limited Natural Frequency Constraints Using Comprehensive Learning Phasor Particle Swarm Optimization, Ei Cho Pyone

Chulalongkorn University Theses and Dissertations (Chula ETD)

In this research, a phasor particle swarm optimization with comprehensive learning strategy (CLPPSO) is proposed for the optimal design of dome-like truss structures under the limited frequency-constraints. The proposed scheme is a new variant of PSO techniques with the direct combination of both the phasor theory in mathematics and comprehensive learning strategy to the particle swarm optimization. In order to model particle control parameters, a phase angle incorporating the periodic sine and cosine functions is essentially applied through which only the previous best positions of all particles are used to update the exemplar particle’s velocity during the optimization process. This …


Simultaneous Size And Shape Structural Optimization Using Enhanced Comprehensive Learning Particle Swarm Optimization, Soviphou Muong Jan 2021

Simultaneous Size And Shape Structural Optimization Using Enhanced Comprehensive Learning Particle Swarm Optimization, Soviphou Muong

Chulalongkorn University Theses and Dissertations (Chula ETD)

This study proposes a simultaneous size and shape structural optimization on truss structures using a metaheuristic algorithm, namely Enhanced Comprehensive Learning Particle Swarm Optimization (ECLPSO) which is based on the CLPSO algorithm. CLPSO itself was originated from a famous Particle Swarm Optimization (PSO) that was invented based on behaviour or movement of a bird flock. CLPSO is an improved PSO algorithm which has good exploration ability but is poor in exploitation. Thus, ECLPSO introduces of two enhancements, including perturbation-based exploitation and adaptive learning probabilities, to improve the exploitation ability and to adjust the learning probabilities of each particle, respectively. The …


A System For Generating Fire Extinguisher Plan And Supporting Fire Evacuation Route In Construction Project, Thiha Nyimin Jan 2021

A System For Generating Fire Extinguisher Plan And Supporting Fire Evacuation Route In Construction Project, Thiha Nyimin

Chulalongkorn University Theses and Dissertations (Chula ETD)

Fires in under-construction threaten worker safety and have a lot of negative impacts on many aspects of construction that were reported the past few years. Due to the dynamic nature of construction, the fire safety plan in construction needed to be reviewed and updated according to construction progress. The conventional approach or manual process to develop the fire safety plan for a construction project can be a time-consuming and enormous labor-intensive task. Furthermore, some of the emergency signs are unclear due to the nature of construction and some are not showing the correct evacuation route because of the structural design …


Experimental Investigation And Numerical Modelling Of Biomechanical Variation Of Decomposed Root: An Application Of Vegetated Slope Stability, Trung Nghia Phan Jan 2021

Experimental Investigation And Numerical Modelling Of Biomechanical Variation Of Decomposed Root: An Application Of Vegetated Slope Stability, Trung Nghia Phan

Chulalongkorn University Theses and Dissertations (Chula ETD)

Plant root reinforcement in soil bioengineering has gained increasing interest as a means of sustainable and environmentally friendly soil reinforcement and stabilization. In addition, quantifying evolutions of the biomechanical properties and mechanical root reinforcement to soil with the duration of root decomposition is important to agricultural land-use strategy and to soil stabilization purpose. However, the variations of these properties of the roots of herbaceous species, especially following herbicide application, have rarely been studied. This study aims to comprehensively measure the root morphological traits, root biomechanical properties, and root reinforcement of two contrasting vetiver species (Chrysopogon nemoralis and Chrysopogon zizanioides). In …


Effects Of Configuration And Operating Conditions On Turbidity Removal Of Jet Clarifier, Ploypailin Romphophak Jan 2021

Effects Of Configuration And Operating Conditions On Turbidity Removal Of Jet Clarifier, Ploypailin Romphophak

Chulalongkorn University Theses and Dissertations (Chula ETD)

In water treatment, flocculation creates large and weighty flocs enough to be removed by the downstream processes of sedimentation and filtration. Among the various existing technologies, the jet clarifier is considered as an effective and compact system as it couples flocculation and clarification in a single unit. For the design of jet mixing, much experimental work has been done and many correlations have been proposed. However, these correlations are case specifics, and, to date, there is no comprehensive view for the flocculation aspect. In order to evaluate the performance of the jet clarifier for turbidity removal and understand hydrodynamics to …


Low-Flow Assessment For Ungauged Sub-Basin In Upper Ping River Basin, Thailand, Sokseyla Man Jan 2021

Low-Flow Assessment For Ungauged Sub-Basin In Upper Ping River Basin, Thailand, Sokseyla Man

Chulalongkorn University Theses and Dissertations (Chula ETD)

Water scarcity has become one of the most remarkable problems in Thailand. An assessment of low-flow may lead to better water resources management and reduce the risk of water scarcity. The assessment of low-flow in gauged basins where the flow time series are available is straightforward. The challenge exists in ungauged or poorly-gauged basins where the flow data are unavailable or of low quality. Due to the studies of low-flow assessment in ungauged basins are of limited, this study aims to address the low-flow assessment in 25 sub-basins in the Upper Ping River basin in Thailand with available data from …


การไหลผ่านประตูระบายน้ำแบบบานเลื่อนตรงของทางน้ำที่มีขยะ, ธีรภัทร ล้อมลาย Jan 2021

การไหลผ่านประตูระบายน้ำแบบบานเลื่อนตรงของทางน้ำที่มีขยะ, ธีรภัทร ล้อมลาย

Chulalongkorn University Theses and Dissertations (Chula ETD)

การศึกษานี้เป็นการศึกษาในห้องปฏิบัติการเพื่อศึกษาถึงการไหลลอดผ่านประตูระบายน้ำแบบบานเลื่อนตรงของทางน้ำที่มีขยะในทางน้ำ ภายใต้เงื่อนไขการไหลผ่านประตูแบบไหลออกอิสระ และ ไหลออกแบบท่วมจม การศึกษานี้ดำเนินการในห้องปฏิบัติการแบบจำลองชลศาสตร์และชายฝั่งทะเล ภาควิชาวิศวกรรมแหล่งน้ำ จุฬาลงกรณ์มหาวิทยาลัย โดยดำเนินการทดลองในรางน้ำเปิดหน้าตัดสี่เหลี่ยมผืนผ้าขนาดกว้าง 0.60 เมตร ยาว 18.0 เมตร สูง 0.75 เมตร ที่มีการไหลเวียนของน้ำ การศึกษานี้ได้จำลองขยะที่ลอยอยู่บนผิวน้ำด้วยเศษวัสดุภัณฑ์ขวดน้ำพลาสติก เศษกิ่งไม้ และ อิฐมวลเบา โดยมีอัตราการไหลชองน้ำที่ใช้ในการทดลองอยู่ในช่วง 17.7 ลิตรต่อวินาที ถึง 23.5 ลิตรต่อวินาที สำหรับการทดลองภายใต้เงื่อนไขการไหลออกอิสระ และ 12.3 ลิตรต่อวินาที ถึง 18.6 ลิตรต่อวินาที สำหรับการทดลองภายใต้เงื่อนไขการไหลออกท่วมจม ตามลำดับ การทดลองทั้งสิ้นมีทั้งหมด 160 การทดลอง ที่ประกอบด้วย การทดลองภายใต้เงื่อนไขการไหลออกอิสระ 40 การทดลอง และ การทดลองภายใต้เงื่อนไขการไหลออกท่วมจม 120 การทดลอง ผลการศึกษานี้แสดงให้เห็นว่าค่าสัมประสิทธิ์อัตราการไหลของประตูระบายแบบบานเลื่อนตรง (Cd) ซึ่งเป็นดัชนีใช้ชี้วัดการไหลลอดผ่านประตูนั้น ของทางน้ำมีขยะปนจะมีค่าน้อยกว่าทางน้ำที่ไม่มีขยะปน นอกจากนี้ยังพบว่า ค่าสัมประสิทธิ์อัตราการไหล จะลดลงเมื่อปริมาณขยะเพิ่มมากขึ้น ทั้งสองเงื่อนไขของการไหลผ่านประตูระบายดังกล่าว


พฤติกรรมการไหลของสารละลายโพลิเมอร์ในดินทรายกรุงเทพฯ, เบญจพล เบญจวรางกูล Jan 2021

พฤติกรรมการไหลของสารละลายโพลิเมอร์ในดินทรายกรุงเทพฯ, เบญจพล เบญจวรางกูล

Chulalongkorn University Theses and Dissertations (Chula ETD)

สารละลายโพลิเมอร์พีเอชพีเอ นิยมนำมาใช้ในการรักษาเสถียรภาพของหลุมเจาะในการก่อสร้างเสาเข็มเจาะในชั้นดินกรุงเทพฯ แต่เนื่องจากสารละลายโพลิเมอร์พีเอชพีเอสามารถไหลซึมเข้าไปในชั้นทรายได้ง่ายจึงเกิดการสูญเสียเป็นปริมาณมากในระหว่างการก่อสร้าง โดยค่าอัตราการไหลจะเปลี่ยนแปลงไปตามค่าความเข้มข้นของสารละลายโพลิเมอร์ และอัตราการปนเปื้อนฝุ่นดินเหนียวในระหว่างการขุดเจาะผ่านชั้นดินเหนียวกรุงเทพฯ ผลการทดสอบจากงานวิจัยฉบับนี้แสดงให้เห็นว่าค่าอัตราการไหลของสารละลายโพลิเมอร์แปรผันตามค่าความเข้มข้นของสารละลายโพลิเมอร์ ในขณะที่ค่าอัตราการไหลของของสารละลายโพลิเมอร์แปรผกผันกับอัตราการปนเปื้อนฝุ่นดินเหนียวในสารละลายโพลิเมอร์ นอกจากนี้ค่าความเข้มข้นของสารละลายโพลิเมอร์ และอัตราการปนเปื้อนฝุ่นดินเหนียวยังส่งผลต่อความสามารถในการไหลผ่านดินทรายของสารละลาย โดยการปนเปื้อนฝุ่นดินเหนียวจะลดค่าความหนืดของสารละลายโพลิเมอร์ลง ดังนั้นปริมาณการไหลของสารละลายโพลิเมอร์เข้าไปในดินทรายมีค่าแปรผันตามอัตราการปนเปื้อนของฝุ่นดินเหนียวในสารละลายโพลิเมอร์ ในขณะที่ปริมาณการไหลของสารละลายโพลิเมอร์เข้าไปในดินทรายมีค่าแปรผกผันกับค่าความเข้มข้นของสารละลายโพลิเมอร์


การประยุกต์ใช้แบบจำลองสารสนเทศอาคารเพื่อการถอดปริมาณและจัดการวัสดุผนังอิฐก่อ, เมธาสิทธิ์ จันทร์พิทักษ์ Jan 2021

การประยุกต์ใช้แบบจำลองสารสนเทศอาคารเพื่อการถอดปริมาณและจัดการวัสดุผนังอิฐก่อ, เมธาสิทธิ์ จันทร์พิทักษ์

Chulalongkorn University Theses and Dissertations (Chula ETD)

ผนังอิฐก่อเป็นการก่อสร้างที่เป็นที่นิยมในการก่อสร้างอาคาร ในการถอดปริมาณวัสดุก่อผนังมักจะใช้การประมาณวัสดุเป็นอัตราส่วนจากพื้นที่ผนัง ซึ่งมักจะไม่มีรูปแบบที่มีรายละเอียดข้อมูลชิ้นส่วนที่ละเอียดเพียงพอ และยังมีผลต่อการถอดปริมาณที่มักจะถอดปริมาณได้ไม่ตรงกับความเป็นจริงเนื่องจากผนังแต่ละผืนมีลักษณะแตกต่างกันไป ส่งผลให้การก่อสร้างที่ได้อาจไม่เป็นไปตามมาตรฐาน เช่น ไม่มีการเสริมเสาเอ็นหรือคานทับหลังในตำแหน่งที่ควรทำ ขนาดหรือระยะของเสาเอ็นและคานทับหลังไม่เป็นตามมาตรฐานงานก่อสร้าง ต้องมีการแก้ไขงานก่อสร้างและทำให้เกิดขยะ ซึ่งเป็นผลต่อการก่อสร้างทั้งด้านคุณภาพ เวลา และงบประมาณ งานวิจัยนี้จึงมีวัตถุประสงค์เพื่อเสนอแนวทางการใช้งานแบบจำลองสารสนเทศอาคารโดยใช้การคำนวณจากข้อมูล BIM เพื่อถอดปริมาณและสร้างข้อมูลรายละเอียดการก่อสร้างชิ้นส่วนเสาเอ็น คานทับหลัง และอิฐในผนังอิฐก่อ โดยงานวิจัยใช้โปรแกรม Dynamo ผ่านโปรแกรม Autodesk Revit ในการสร้างวิธีการคำนวณและชุดคำสั่งเพื่อคำนวณตำแหน่ง ความยาว และปริมาณของชิ้นส่วนเสาเอ็น คานทับหลัง และอิฐ ผลการวิเคราะห์พบว่าใช้เวลาในการถอดปริมาณน้อยและสามารถให้แสดงผลในรูปแบบสามมิติได้ ซึ่งช่วยเสริมในการมองเห็นรายละเอียดตำแหน่งและความยาวของชิ้นส่วนเสาเอ็น คานทับหลัง และอิฐแต่ละชิ้นได้ สามารถนำข้อมูลของชิ้นส่วนแต่ละชิ้นไปช่วยในการวางแผนการก่อสร้างต่อไป


ความแม่นยำของการประมาณสัดส่วนปริมาณการจราจรตามทิศทางของทางแยกจากข้อมูลโพรบ, กันฑ์อเนก มกรพงศ์ Jan 2021

ความแม่นยำของการประมาณสัดส่วนปริมาณการจราจรตามทิศทางของทางแยกจากข้อมูลโพรบ, กันฑ์อเนก มกรพงศ์

Chulalongkorn University Theses and Dissertations (Chula ETD)

ปริมาณการจราจรตามทิศทางของทางแยก คือ การนับปริมาณการจราจรของยานพาหนะที่เคลื่อนที่ไปในทิศทางต่างๆ ณ ทางแยก โดยข้อมูลจราจรเหล่านี้ได้จากการเก็บข้อมูล ซึ่งแบ่งเป็นสองกลุ่ม คือ การเก็บข้อมูลโดยมนุษย์ ซึ่งมีความแม่นยำในระดับที่มีความน่าเชื่อถือค่อนข้างสูง แต่จะสามารถเก็บได้เพียงแค่ 1 วัน ใน 1 ปี ในแต่ละทางแยก นอกจากนี้ยังมีการเก็บข้อมูลอีกประเภท คือ การเก็บข้อมูลโดยใช้อุปกรณ์ที่ติดตั้งตามยานพาหนะ หรือเรียกว่า โพรบ ข้อมูลที่ได้จากโพรบจะเป็นข้อมูลจำนวนนับรถซึ่งเป็นข้อมูลกลุ่มตัวอย่าง เนื่องจากจำนวนรถที่ของข้อมูลทั้งสองมีความแตกต่างกันค่อนข้างมาก อาจจะไม่สามารถเปรียบเทียบความแม่นยำได้ ดังนั้น สิ่งที่น่าสนใจในงานวิจัยนี้ คือ เมื่อแปลงปริมาณรถที่ได้จากการนับรถจริงและข้อมูลจำนวนนับรถที่ได้จากโพรบ สัดส่วนข้อมูลจำนวนนับรถที่ได้จากโพรบจะสามารถเป็นตัวแทนสัดส่วนที่ได้จากการนับรถจริงหรือไม่ โดยการเปรียบเทียบความแตกต่างของสัดส่วนปริมาณการจราจรตามทิศทางในแต่ละช่วงเวลา ได้แก่ ช่วงเร่งด่วนเช้า นอกเวลาเร่งด่วน และช่วงเร่งด่วนเย็น ซึ่งมีทั้งหมด 11 ทางแยก นอกจากนี้ยังทำการเปรียบเทียบความแตกต่างของสัดส่วนปริมาณการจราจรตามทิศทางของทางแยกโดยใช้ข้อมูลสัดส่วนปริมาณการจราจรตามทิศทางของทางแยกใน 1 ชั่วโมง และข้อมูลสัดส่วนปริมาณการจราจรตามทิศทางของทางแยกที่สะสมเป็นจำนวน 2 ชั่วโมง จากผลการศึกษา พบว่า ความแม่นยำจากการเปรียบเทียบสัดส่วนปริมาณการจราจรตามทิศทางของทางแยกโดยการประมาณการ จะมีความแม่นยำสูงในช่วงนอกเวลาเร่งด่วน และ เร่งด่วนเย็น โดยข้อมูลที่เหมาะสมจะใช้งานในด้านวิศวกรรมจราจร คือ ข้อมูลจราจรที่มีการสะสมเป็นเวลา 2 ชั่วโมง เมื่อนำสัดส่วนปริมาณการจราจรตามทิศทางของทางแยกที่ได้จากข้อมูลโพรบไปใช้ในการตั้งสัญญาณไฟจราจรในช่วงเวลาดังกล่าว พบว่ามีความแม่นยำประมาณร้อยละ 70 ถึงร้อยละ 80 เป็นส่วนใหญ่


การศึกษา​ปัจจัยของการจัดการทรัพยา​กรมนุษย์​และการจัดการความรู้​ที่ส่งผลต่อผลการดำเนินงาน​ของ​บริษัท​รับเหมาก่อสร้าง​โครงสร้าง​พื้นฐาน​ไทย, ชนาธิป ควาภาพงษ์ Jan 2021

การศึกษา​ปัจจัยของการจัดการทรัพยา​กรมนุษย์​และการจัดการความรู้​ที่ส่งผลต่อผลการดำเนินงาน​ของ​บริษัท​รับเหมาก่อสร้าง​โครงสร้าง​พื้นฐาน​ไทย, ชนาธิป ควาภาพงษ์

Chulalongkorn University Theses and Dissertations (Chula ETD)

เนื่องจากสภาวะการแข่งขันที่สูงขึ้นของอุตสาหกรรมก่อสร้างโครงสร้างพื้นฐานไทยในปัจจุบัน การสร้างความได้เปรียบในการแข่งขันโดยใช้เงินทุน และเครื่องจักรอาจไม่เพียงพอ สิ่งใหม่ที่สามารถทำได้เพื่อรักษาความได้เปรียบในการแข่งขัน คือ การนำแนวคิดของการจัดการทรัพยากรมนุษย์ (HRM) และการจัดการความรู้ (KM) มาปรับใช้ให้เกิดประโยชน์ ดังนั้น งานวิจัยฉบับนี้จึงมีวัตถุประสงค์เพื่อศึกษาถึงระดับความสัมพันธ์ของแต่ละองค์ประกอบของปัจจัยการจัดการทรัพยากรมนุษย์ทั้ง 4 ด้าน ได้แก่ การสรรหาและคัดเลือก การฝึกอบรมและพัฒนา ผลตอบแทน และการประเมินผลการปฏิบัติงาน รวมถึงการจัดการความรู้ทั้ง 4 ด้าน ได้แก่ การแสวงหาความรู้ การสร้างความรู้ การจัดเก็บและสืบค้นความรู้ และการถ่ายทอดและใช้ความรู้ ที่ส่งผลการเพิ่มขึ้นของผลการดำเนินงานที่ไม่ใช่ทางการเงินตามแนวคิด Balanced scorecard (BSC) ของบริษัทรับเหมาก่อสร้างโครงสร้างพื้นฐานไทย โดยใช้เทคนิคการวิเคราะห์โมเดลสมการโคงสร้าง (SEM) ผลลัพธ์ที่ได้พบว่า ทั้งการจัดการทรัพยากรมนุษย์ การจัดการความรู้ และผลการดำเนินงานขององค์การมีความสัมพันธ์ซึ่งกันและกันอย่างมีนัยสำคัญ โดยการจัดการทรัพยากรมนุษย์มีอิทธิพลต่อการเพิ่มขึ้นของผลการดำเนินงานขององค์การมากที่สุด และยังมีอิทธิพลในทางบวกต่อการจัดการความรู้ซึ่งสามารถส่งผ่านอิทธิพลทางอ้อมไปยังผลการดำเนินงานขององค์การได้ในอีกทางหนึ่ง


การติดตามวัดผลของโครงสร้างป้องกันชายฝั่งตามแนวชายฝั่งตะวันออกของปากแม่น้ำเจ้าพระยา, วริทธิ์ เจริญฤกษ์ถวิล Jan 2021

การติดตามวัดผลของโครงสร้างป้องกันชายฝั่งตามแนวชายฝั่งตะวันออกของปากแม่น้ำเจ้าพระยา, วริทธิ์ เจริญฤกษ์ถวิล

Chulalongkorn University Theses and Dissertations (Chula ETD)

การวิจัยครั้งนี้ มุ่งศึกษา 1) การเปลี่ยนแปลงชายฝั่งตะวันออกของปากแม่น้ำเจ้าพระยา ยาว 42 กม. ในช่วง 7 ทศวรรษที่ผ่านมา 2) การตอบสนองของแนวชายฝั่งหาดเลน ต่อการมีอยู่ของโครงสร้างป้องกันชายฝั่ง และ 3) การวัดผลเขื่อนกันคลื่นในการป้องกันพื้นที่ศึกษา การเปลี่ยนแปลงชายฝั่ง ถูกประเมินจากภาพถ่ายทางอากาศและภาพดาวเทียม ที่บันทึกในช่วงปี 2549–2564 มีการสร้างข้อมูลแบบจำลองภูมิประเทศ จากการสำรวจด้วยแสงเลเซอร์แบบติดตั้งกับโดรน (UAV-LiDAR) โดยข้อมูลทั้งสองกลุ่มถูกนำมาใช้ในการประเมินประสิทธิผลป้องกันชายฝั่ง และใช้ในการสร้างเกณฑ์การออกแบบเขื่อนกันคลื่น สำหรับพื้นที่ศึกษา ผลการศึกษาพบว่าในช่วงปี 2497–2539 มากกว่า 50% ของแนวชายฝั่งที่ศึกษาเกิดการถอยร่นอย่างต่อเนื่องและรุนแรง เสียพื้นที่ไปราว 700 เฮกตาร์ ในปี 2537 กำแพงกันตลิ่งถูกสร้างตามแนวชายฝั่งเป็นระยะทาง 10 กม. ใกล้ปากแม่น้ำเจ้าพระยา ทำให้ 23% ของแนวชายฝั่ง ที่ศึกษามีเสถียรภาพจนถึงปัจจุบัน แต่อีก 70% ที่เหลือ เกิดการถดถอยอย่างรุนแรง ด้วยอัตราเฉลี่ย -15 ม./ปี ในปี 2548 เขื่อนกันคลื่นจมน้ำด้วยไส้กรอกทราย ถูกติดตั้งตามแนวชายฝั่งที่ถูกกัดเซาะ เป็นระยะทาง 25 กม ส่งผลให้ 35% ของชายฝั่งมีเสถียรภาพ อีก 56% ที่เหลือยังคงเกิดการถดถอย แต่อัตราการกัดเซาะเฉลี่ยลดลงเหลือเพียง -8 ม./ปี เนื่องจากไส้กรอกทรายมีอายุการใช้งานเพียง 4–5 ปี เขื่อนกันคลื่นด้วยหินทิ้งจึงถูกนำมาแทนที่ ในปี 2558 ทำให้แนวชายฝั่งที่เกิดการถดถอยลดลงเหลือเพียง 28% ด้วยอัตราเฉลี่ย -2 ม./ปี และมีอัตราการทับถมตะกอนด้านหลังเขื่อนเฉลี่ย 4–12 ซม./ปี ตั้งแต่ปี 2558 เขื่อนกันคลื่นใกล้ฝั่ง ถูกสร้างตามปากคลองสายหลักที่ยังคงเกิดการถอยร่นชายฝั่ง เขื่อนทุกตัวประสบความสำเร็จในการรักษาเสถียรภาพแนวชายฝั่ง และการฟื้นฟูพื้นที่ชายฝั่ง โดยมีอัตราการงอกชายฝั่งเฉลี่ย 11 ม./ปี และมีอัตราการทับถมตะกอนด้านหลังโครงสร้าง 16–32 ซม./ปี นอกจากโครงสร้างวิศวกรรมแล้ว ไม้ไผ่ชะลอคลื่น ซึ่งเป็นโครงสร้างที่ใช้วัสดุธรรมชาติ ถูกนำมาติดตั้งด้านหลังเขื่อนกันคลื่นจมน้ำ ตามแนวชายฝั่งแนวชายฝั่งพื้นที่ศึกษาตั้งแต่ปี 2545 แม้ว่าส่วนใหญ่ …


เสถียรภาพของอาคารคอนกรีตเสริมเหล็กที่ใช้กำแพงที่มีความชะลูดภายใต้แผ่นดินไหว, ชวิสรา เทศประสิทธิ์ Jan 2021

เสถียรภาพของอาคารคอนกรีตเสริมเหล็กที่ใช้กำแพงที่มีความชะลูดภายใต้แผ่นดินไหว, ชวิสรา เทศประสิทธิ์

Chulalongkorn University Theses and Dissertations (Chula ETD)

ความหนาของกำแพงโครงสร้างที่ใช้ออกแบบอาคารสูงในปัจจุบันมีค่าน้อยกว่าค่าที่ใช้ในอดีต ส่งผลให้กำแพงอาจขาดเสถียรภาพทางด้านข้าง อาจพบกำแพงโครงสร้างในประเทศไทยที่มีความหนาเพียง 100 มิลลิเมตร ส่งผลให้อัตราส่วนความระหว่างความสูงต่อความหนามากกว่า 25 ซึ่งกำหนดไว้ใน Uniform Building Code (UBC 1997) และ ACI 318-19 งานวิจัยนี้มีวัตถุประสงค์เพื่อตรวจสอบว่าอาคารสูงที่ได้รับการออกแบบตามมาตรฐานในปัจจุบันและมีกำแพงโครงสร้างที่มีความชะลูดค่อนข้างมาก เช่น มีอัตราส่วนความสูงต่อความหนากำแพงเท่ากับ 15 20 และ 25 ว่ามีเสถียรภาพเพียงพอในการต้านทานแผ่นดินไหวได้หรือไม่ อาคารตัวอย่างที่ใช้ในการศึกษานี้เป็นอาคารคอนกรีตเสริมเหล็กสูง 30 ชั้น ระบบโครงสร้างเป็นแบบกำแพงรับน้ำหนักบรรทุกแนวดิ่ง โดยระบบต้านทานแรงด้านข้างเป็นกำแพงรับแรงเฉือนแบบที่มีการให้รายละเอียดความเหนียวพิเศษ การศึกษานี้จะคำนวณการตอบสนองต่อแผ่นดินไหวและตรวจสอบเสถียรภาพด้วยวิธีแบบประวัติเวลาไม่เชิงเส้น (Nonlinear Response History Analysis, NLRHA) และเปรียบเทียบผลการวิเคราะห์จากการจำลองชิ้นส่วนกำแพงเดี่ยว 2 ลักษณะคือ เอลิเมนต์แบบเส้น (line element) และเอลิเมนต์แบบเปลือกบาง (shell element) รวมถึงศึกษาผลการขยายความรุนแรงของแผ่นดินไหวต่อค่าตอบสนองร่วมด้วย ผลการศึกษาพบว่ากำแพงในอาคารตัวอย่างมีเสถียรภาพเพียงพอในการต้านทานแรงทางด้านข้าง นอกจากนี้การรับแรงในระนาบของกำแพงมีค่าสูงอย่างมีนัยสำคัญเมื่อเทียบกับการรับแรงนอกระนาบของกำแพง ส่งผลให้ความความเครียดของกำแพงเดี่ยวมีค่ามากเมื่อรับแรงในระนาบอาจนำไปสู่การครากของเหล็กเสริมแนวดิ่งและการอัดแตกของคอนกรีตในกำแพงได้ แต่ความเครียดของกำแพงเดี่ยวมีค่าน้อยมากเมื่อรับแรงกระทำตั้งฉากกับระนาบ ความเครียดอัดในกำแพงพบว่ามีค่าไม่เกิน 0.002


การเพิ่มประสิทธิภาพของโครงสร้างอาคารสูงภายใต้แรงลมและแผ่นดินไหวด้วยคอนกรีตโมดูลัสยืดหยุ่นสูง, ฐิติภูมิ พัวจินดาเนตร Jan 2021

การเพิ่มประสิทธิภาพของโครงสร้างอาคารสูงภายใต้แรงลมและแผ่นดินไหวด้วยคอนกรีตโมดูลัสยืดหยุ่นสูง, ฐิติภูมิ พัวจินดาเนตร

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้มีจุดประสงค์เพื่อศึกษาการประยุกต์ใช้คอนกรัตโมดูลัสยืดหยุ่นสูง (High Modulus Concrete, HMC) ที่มีต่อการเคลื่อนตัวด้านข้างของอาคารสูง โดยการประเมินประสิทธิภาพและความคุ้มค่าทางเศรษฐศาสตร์ในการนำ HMC มาประยุกต์ใช้ในการออกแบบก่อสร้างอาคารสูง ซึ่งมีขั้นตอนดังนี้ (1) สร้างแบบจำลองอาคาร และ วิเคราะห์การเคลื่อนตัวที่ชั้นหลังคา (RD) และ สัดส่วนความปลอดภัย (D/C Ratio) ของอาคารตัวอย่างเมื่อได้รับแรงด้านข้างตามมาตรฐานแรงลมและแรงแผ่นดินไหว ในโปรแกรม ETABS (2) ศึกษาผลของการประยุกต์ใช้ HMC ที่มีต่อการเคลื่อนตัวที่ชั้นหลังคา (RD) ภายใต้แรงลม โดยเสนอสมการประมาณสมการการเคลื่อนตัวที่หลังคา (RDE) และทำการเปรียบเทียบผลการคำนวณที่ได้กับค่าจากโปรแกรม ETABS (3) ศึกษากรณีขยายขนาดหน้าตัดอาคารโดยวิธีการพอก (Concrete Jacketing) ด้วยคอนกรีตทั่วไป (4) วิเคราะห์และหาค่า RD และ ค่า D/C หลังการประยุกต์ใช้ HMC และการพอกด้วยคอนกรีตทั่วไป (5) ศึกษาความคุ้มค่าเชิงเศรษฐศาสตร์ระหว่าง การประยุกต์ใช้ HMC และ การเพิ่มหน้าตัดโดยการพอกด้วยคอนกรีตทั่วไป ซึ่งจากผลการศึกษาพบว่า (1) สมการประมาณการเคลื่อนตัวที่ชั้นหลังคาให้ค่าที่แม่นยำโดยมีความแตกต่างจากค่าที่คำนวณโดย ETABS คิดเป็นค่าร้อยละเฉลี่ยเท่ากับ 0.63%±1.22% (2) บริเวณช่วงล่างของอาคาร (Lower Portion) เป็นตำแหน่งที่ เหมาะสมที่สุด (Suitable Position) สำหรับการประยุกต์ใช้ HMC เพื่อควบคุมการเคลื่อนตัวด้านข้างให้อยู่ในเกณฑ์มาตรฐาน (3) การประยุกต์ใช้ HMC ในอาคารจะไม่ทำให้อาคารสูญสียพื้นที่ใช้สอย (Usage Area)เมื่อเทียบกับการพอกด้วยคอนกรีตทั่วไป (4) เมื่อพิจารณามูลค่าเชิงเศรษฐศาสตร์จะพบว่าการประยุกต์ใช้ HMCให้ประโยชน์เชิงเศรษฐศาสตร์ สูงกว่า การพอก ดังนั้นการประยุกต์ใช้คอนกรีตโมดูลัสยืดหยุ่นสูง (HMC) จึงอาจเป็นทางเลือกหนึ่งที่เหมาะสมในการควบคุมการเคลื่อนตัวด้านข้างของอาคารสูงอย่างมีประสิทธิภาพและคุ้มค่ากว่าวิธีการเพิ่มขนาดหน้าตัดขององค์อาคาร


การวิเคราะห์ความต้านทานแผ่นดินไหวของอาคารที่พักอาศัยคอนกรีตหล่อสำเร็จที่จุดต่อระหว่างเสาและคานเป็นแบบแผ่นเกี่ยว, ณัฐวุฒิ ชวดฉิม Jan 2021

การวิเคราะห์ความต้านทานแผ่นดินไหวของอาคารที่พักอาศัยคอนกรีตหล่อสำเร็จที่จุดต่อระหว่างเสาและคานเป็นแบบแผ่นเกี่ยว, ณัฐวุฒิ ชวดฉิม

Chulalongkorn University Theses and Dissertations (Chula ETD)

ปัจจุบันอุตสาหกรรมการก่อสร้างที่อยู่อาศัยได้มีการขยายตัวเพิ่มขึ้น อันเนื่องมาจากการเพิ่มขึ้นของจำนวนประชากร โดยการก่อสร้างระบบคอนกรีตหล่อสำเร็จ เป็นวิธีการก่อสร้างที่นิยมมากขึ้นในปัจจุบัน ซึ่งจะสามารถควบคุมคุณภาพของชิ้นส่วนให้มีความแข็งแรง และใช้ระยะเวลาในการก่อสร้างที่หน้างานลดลง ในช่วงก่อนที่กฎกระทรวงฉบับที่ 46 (พ.ศ.2540) และกฎกระทรวง พ.ศ.2550 ออกตามความในพระราชบัญญัติควบคุมอาคาร พ.ศ.2522 จะมีผลบังคับใช้ มิได้คำนึงถึงการคำนวณและการออกแบบให้โครงสร้างอาคารให้รับแรงแผ่นดินไหว ดังนั้นจึงมีความเสี่ยงที่อาคารจะเกิดความเสียหายของโครงสร้างได้ งานวิจัยนี้จึงเลือกพิจารณาอาคารตัวอย่างเป็นอาคารที่พักอาคารจำนวน 2 ชั้น โดยมีจุดต่อระหว่างเสาและคานเป็นแบบแผ่นเกี่ยว (socket) และจุดต่อระหว่างเสาและเสาเป็นแบบสลักเกลียว (bolting) โดยจะทำการเปรียบเทียบแบบจำลองทั้งหมด 3 แบบ คือโครงสร้างคอนกรีตหล่อในที่ (cast-in-place concrete) โครงสร้างคอนกรีตหล่อสำเร็จเมื่อพิจารณาส่วนยื่นของคาน และโครงสร้างคอนกรีตหล่อสำเร็จเมื่อไม่พิจารณาส่วนยื่นของคาน โดยทั้ง 3 แบบจะใช้แบบอาคารเดียวกัน และสมมติที่ตั้งของอาคารตัวอย่างอยู่ที่ อ.เมือง จ.เชียงใหม่และสมมติประเภทของชั้นดินเป็นประเภท D ซึ่งจะทำการวิเคราะห์โครงสร้างภายใต้แผ่นดินไหวโดยวิธีการผลักทางด้านข้าง (pushover analysis) และวิธีวิเคราะห์การตอบสนองไม่เชิงเส้นประวัติเวลา (Nonlinear Response History Analysis) ตามมาตรฐาน มยผ.1301/1302-61 โดยสร้างแบบจำลองชิ้นส่วนเสาและคานเป็นแบบเชิงเส้นและไม่เชิงเส้นในโปรแกรมวิเคราะห์โครงสร้าง ETABS V18 และกำหนดจุดรองรับเป็นแบบยึดแน่น เพื่อประเมินความเสียหายที่เกิดขึ้นในชิ้นส่วนของโครงสร้างและการเคลื่อนตัวสัมพัทธ์ระหว่างชั้น ผลการศึกษาพบว่าอาคารตัวอย่างทั้ง 3 แบบมีค่าอัตราส่วนระหว่างแรงที่ต้องต้านทานต่อกำลังที่หน้าตัดรับได้ (DCR) มีค่ามากกว่า 1 หมายความว่าหน้าตัดเสาและคานไม่สามารถรับแรงที่เกิดขึ้นได้ ในส่วนของการประเมินความเสียหายโดยรวมของอาคารจากความเสียหายที่เกิดขึ้นในองค์อาคารและการเคลื่อนตัวสัมพัทธ์ระหว่างชั้นพบว่าอาคาร CIP มีความเสียหายไม่ผ่านเกณฑ์ระดับป้องกันการพังทลาย สำหรับอาคาร PCB มีความเสียหายอยู่ในเกณฑ์ของระดับป้องกันการพังทลาย ซึ่งเป็นระดับที่มีความเสียหายรุนแรงมาก สุดท้ายอาคาร PCNB มีความเสียหายไม่ผ่านเกณฑ์ระดับป้องกันการพังทลาย


สมบัติของปอร์ตแลนด์ซีเมนต์และจีโอโพลิเมอร์คอนกรีตที่ใช้มวลรวมหยาบจากขยะพลาสติกชนิดโพลีโพรไพลีน, ธิติ กางโหลน Jan 2021

สมบัติของปอร์ตแลนด์ซีเมนต์และจีโอโพลิเมอร์คอนกรีตที่ใช้มวลรวมหยาบจากขยะพลาสติกชนิดโพลีโพรไพลีน, ธิติ กางโหลน

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้มีวัตถุประสงค์เพื่อนำขยะพลาสติกกลับมาใช้ใหม่เป็นมวลรวมหยาบสำหรับปูนซีเมนต์ปอร์ตแลนด์ และจีโอโพลิเมอร์คอนกรีต โดยแทนที่ในปริมาณร้อยละ 10, 30 และ 50 โดยปริมาตร โดยมีแผนการทดสอบสมบัติทางวิศวกรรมของคอนกรีตครอบคลุมการทดสอบค่าการไหลแผ่, เวลาการก่อตัว, กำลังอัด, กำลังดัด, กำลังรับแรงดึงแยกของคอนกรีต และความทนทานต่อการกัดกร่อนจากกรดซัลฟิวริก ผลการทดสอบคอนกรีตที่ถูกแทนที่ด้วยพลาสติกถูกนำมาเปรียบเทียบกับผลการทดสอบของคอนกรีตควบคุมที่ผสมมวลรวมหยาบจากวัสดุธรรมชาติ ผลการศึกษาพบว่า ความสามารถในการรับกำลังอัดของปอร์ตแลนด์ซีเมนต์คอนกรีตและจีโอโพลิเมอร์คอนกรีตมีค่าลดลงตามปริมาณพลาสติกที่เพิ่มขึ้นทั้งของอายุบ่ม 7 และ 28 วัน การใช้มวลรวมพลาสติกไม่ส่งผลต่อกำลังดัดและกำลังดึงแยกของปอร์ตแลนด์ซีเมนต์คอนกรีตอย่างมีนัยสำคัญ ในทางตรงกันข้ามกำลังดัดและกำลังดึงแยกของจีโอโพลิเมอร์คอนกรีตมีค่าลดลงเมื่อเพิ่มปริมาณมวลรวมพลาสติก ส่วนในด้านความสามารถในการทนกรดซัลฟิวริกนั้นตัวอย่างที่เป็นจีโอโพลิเมอร์คอนกรีตจะมีการทนกรดซัลฟิวริกดีขึ้นเล็กน้อยเมื่อมีการผสมพลาสติกเข้าไปแทนที่ในมวลรวมหยาบ