Civil and Environmental Engineering Commons^™

Concrete Masonry Unit Construction: Creating Educational Modules On Sustainability, Eric Dam

Construction Management

Concrete Masonry Units are one of the most widely used building materials due to their durability, fire resistance, low maintenance, and specifications. With the growing trend for sustainable construction, it is necessary to teach students how CMUs can contribute to improving environmental performance and dive deeper into multiple resource efficiency. This project developed an instructional module that introduces CMU materials, reviews performance and durability attributes of these materials, and how they are linked to well-known rating systems. The final module includes a presentation, three assignments, and one quiz that will reinforce student learning and refresh industry professionals' knowledge. The following …

Life Cycle Assessment Of A Prefabricated Modular Timber Building, Bryan Mai

Construction Management

Traditional concrete construction carries a high carbon footprint, motivating interest in lower-impact alternatives such as prefabricated modular timber systems. This project conducts a process-based life cycle assessment (LCA) using OpenLCA to evaluate the environmental impacts of a modular timber building. Material quantities from major processes were modeled as flow inputs and converted into standardized OpenLCA units. Impact categories—including acidification potential, human toxicity, and energy/resource use—were analyzed to determine which materials and processes contribute most to overall environmental burden. Results show that transportation and plumbing materials drive the largest acidification impacts, while interior finishes dominate human toxicity. This LCA establishes a …

Building Kit For K-8 Education: An Introduction To Construction Fundamentals, Marc Joynt

Construction Management

Introducing construction concepts to young students requires tools that are both engaging and easy to use, which led to the development of a laser-cut building kit designed for K–8 classrooms. The process began with hand-drawn sketches to establish a simple, age-appropriate structure. The design was then modeled in AutoCAD, where each individual component was drafted for fabrication. After completing the digital model, the files were transferred into Rhino and organized by layer to ensure accurate communication with the laser cutters used to produce the final basswood pieces. Throughout the project, challenges such as material limitations, tolerance adjustments, and simplifying complex …

Assessing Technology Adoption In The Construction Industry, Lucas D. Gibbons

Construction Management

The construction industry is steadily integrating new technologies, yet adoption varies widely depending on company size, market sector, and internal readiness. This study examines how common technologies such as drones (UAVs), Building Information Modeling (BIM), robotics and automated equipment, laser scanning/LiDAR, AI-driven scheduling or analytics tools, and augmented or virtual reality (AR/VR) are being applied in practice, and what benefits they are delivering to construction organizations. To better understand the factors shaping adoption, a survey was administered to members of the CMAC (Construction Management Advisory Council) board representing a range of contractors and industry stakeholders. The survey assessed current technology …

Water Bottle Lid Co Detector, Zeke Bukovansky, Jake Siegel, Jack Wisegarver, Cody Rudman

Mechanical Engineering

This project introduces a portable carbon monoxide detector integrated into a water bottle lid to give users a simple way to stay aware of CO exposure in daily life. The design packages an electrochemical sensor, onboard electronics, and clear visual and audible alerts into a compact form that fits standard bottles. By embedding sensing into an object people already carry, the device offers a practical path toward reducing unrecognized CO risks and improving personal safety.

Per- And Poly-Fluoroalkyl Substances Fate Across California Wastewater Treatment Plants: A Meta-Analysis Of Formation, Distribution, And Persistence, Elizabeth Reineke

Master's Theses

Per- and poly-fluoroalkyl substances (PFAS) are persistent contaminants that move through municipal and industrial wastewater systems with limited attenuation. As a result, they are increasingly detected in drinking water supplies. Despite growing regulatory concern, a systems-level understanding of PFAS behavior across multiple treatment facilities and watershed settings remains incomplete. This study compiled influent, effluent, and biosolids datasets from more than one hundred California wastewater treatment plants to evaluate PFAS occurrence, transformation, and partitioning across diverse treatment configurations. Analytical steps included calculating removal efficiencies, assessing precursor-to-product oxidation, evaluating co-contaminant correlations, and grouping facilities by process design to quantify configuration-specific fate patterns. …

Evaluating Machine-Learning Models For Drone-Based Image Analysis Of Coastal Ecosystem Dynamics, Katharine Mcdaniel, Pragati Toppo

College of Engineering Summer Undergraduate Research Program

Previous work from our group utilized drone-based images and a novel machine learning classification model to quickly and accurately quantify spatial variability in eelgrass in Morro Bay. In this SURP project we aim to develop and evaluate quantifiable estimates of the model’s prediction uncertainty. Our model produces a binary labeling indicating the presence or absence of eelgrass at each pixel. However, internally the model produces a probabilistic output indicating the likelihood of detection at each pixel that we propose to use to produce uncertainty estimates and a confidence interval for the cumulative extent of eelgrass detected. This would allow for …

Behind The Prompt: The Environmental Impact Of Llm Inference, Lucy Hegenderfer, Isaac Huang

College of Engineering Summer Undergraduate Research Program

As the size and demand for large language models (LLMs) increase, the environmental impact of computational inference often exceeds training; yet industry lacks a standardized method of calculating this expanding environmental footprint. Complexity arises with task-specific computational demands, infrastructure overhead, and various GPU architectures, making cross-model assessments burdensome. Combining environmental engineering and computer science principles by validating Jegham et al.’s meta-model, we predict the carbon emissions and water consumption during inference, providing metrics to raise user awareness of AI’s growing environmental footprint. Additional work supports integration into a multi-agent conversational system that encourages responsible scheduling and prompting, guiding the user …

Stretchable Mechanoluminescent Devices For Energy Harvesting And Real-Time Force Sensing, Lucas Taliaferro, Phoebe Ong

College of Engineering Summer Undergraduate Research Program

Our group has been developing a novel manufacturing technique to fabricate flexible sensing devices using electrostatic force. Previously, we focused on utilizing nanomaterials as the sensing materials to measure strains. Building on our experience with the manufacturing technique, we will move forward to incorporate other smart materials in the flexible device to achieve self-powered sensors. Besides, to better understand the fabricated material properties, we are interested in characterizing the microstructural behavior of the material networks via microscopic imaging and finite element simulations. The students will have the opportunity to closely work with Dr. Wang’s interdisciplinary research group.

Seismic Resilience Of Timber Structures, Mia Wootton, Allison Nocon, Mikayla Caruthers, Ava Fineza, Rebecca Slutsky, Min Thit Kant

College of Engineering Summer Undergraduate Research Program

Wood houses dominate the construction landscape in the United States (U.S.), with over 94% of new homes constructed in 2022 being wood framed. New Zealand shares a similar construction landscape, with building practices for wood houses like those in California. Nevertheless, the 2010-2011 Canterbury earthquake sequence damaged nearly three quarters of the housing stock in the region. A total of 150,000 homes were damaged, with about one fifth exceeding NZ$100,000 in damage. To assess the likelihood of economic losses of California’s timber houses, a shake table testing campaign is underway at the California Polytechnic State University Advanced Technology Laboratory in …

Refurbishing And Deploying Oceanographic Equipment, Matthew Moore

College of Engineering Summer Undergraduate Research Program

In this SURP project, a student will help catalog, refurbish, test, and then deploy oceanographic equipment into Morro Bay and nearby coastal regions. In 2024, the Talke lab inherited approximately $300-400k of oceanographic equipment (sticker price) that was originally bought between 2000-2020. Instruments include multiple pressure gauges, velocity instruments, salinity-temperature-turbidity gauges, particle sizers, and a sonar for making bathymetric measurements. Help is needed to check (“talk to”) these instruments, determine which still work, and then field deploy them into the central coast., For some instruments, additional hardware (batteries, cables) and communication adapters may be needed. Because instrument software is often …

Sustainability Literacy In Ceng, The Knowledge-Attitude Disconnect In Sustainability Education: Evidence From Ceng Students, Myron Chen, Rohit Kota

College of Engineering Summer Undergraduate Research Program

Higher education institutions are increasingly incorporating the concept of sustainability into the curricula, but the evaluation of students' level of sustainability knowledge is underdeveloped. The proposed research focuses on Cal Poly's efforts to integrate sustainability principles within the engineering curricula and the impact on students' knowledge. By analyzing existing data collected on the sustainability literacy of Cal Poly’s engineering students, this project aims to enhance teaching strategies and align them with the sustainability goals of both the College and the University. This initiative builds on work initiated last summer and seeks to better prepare engineering students to become future contributors …

Sustainable Development Of Sensing Materials For Structural Health Monitoring, Nat Conti, Matthew Robinson

College of Engineering Summer Undergraduate Research Program

Sensing technologies play significant roles in structural health monitoring (SHM) systems for monitoring and assessing structural conditions in real-time, which can enhance the safety and reliability of various structures. While engineered nanomaterial (ENM)-based sensors have remarkable potential to transform conventional sensing devices, large volume of ENMs released into the environment can significantly jeopardize the environment and public health. Thus, there is a pressing need to develop next-generation sensing materials in a more eco-friendly and sustainable manner. The goal of this interdisciplinary proposal is to sustainably develop sensing nanocomposites for monitoring structural damage by re-using waste materials as nano-/micro-scale functional material …

Wearable Sensing Systems And Data Analytics For Pressure Sensing Prosthetics, Aiden Freeland

College of Engineering Summer Undergraduate Research Program

This interdisciplinary research, in collaboration with Sony, aims to improve the fit and comfort of socket prosthetics for amputees by utilizing sensing technology and data analytical techniques. Many amputees face issues with prosthetic fit, which can lead to discomfort, pain, and even tissue damage. Our goal is to address these problems by developing a low-cost, universal, and wearable sensing system that can continuously monitor the pressures at the residual limb and prosthetic socket interface. This product will provide feedback to the user, allowing for real-time adjustments, ensuring a comfortable fit, and avoiding injury. Our research group has extensive experience in …

Using Hydraulic Simulations To Determine The Effects Of Tidal Behavior And Riparian Restoration On Chorro Creek, Jonathan L. Maas

Master's Theses

This thesis examines how tidal backwater effects and riparian restoration influence flooding in the Chorro Creek watershed, a major tributary to the Morro Bay Estuary on California’s Central Coast. Restoration efforts, including levee removal, floodplain reconnection, and revegetation have attempted to improve ecological function and reduce sediment transport. However, recent flood events suggest that these changes may also affect local hydraulics in ways not fully anticipated, particularly under the influence of tides and sea level rise. To analyze these dynamics, a two-dimensional HEC-RAS model was developed using LiDAR terrain, historical imagery, and field data collected from pressure and ultrasonic gauges. …

Building A Sustainable Home On The Central Coast: An Owner’S Perspective, Austin Chase Anderson

Construction Management

As awareness and technology increase, sustainability as a focus in home construction is also increasing. This case study based research project seeks to understand the process of building a home on California’s Central Coast with sustainability in mind. An interview was conducted with an owner who built their home in Templeton in 2019. The interview was in a semi-structured format which included specific qualitative questions but mostly focused on an open-ended discussion which allowed the owner to share their own experience. The key challenges learned from this interview were that the owner believed price to be the main factor that …

Caed Shop Entrance Wall Redesign, Ellen Elizabeth Untalan, Joelle Schalesky, Katherine Evalyn Timbes

Architectural Engineering: Graduate Reports

This project involved the replacement and redesign of the north wall at the CAED Support Shop at Cal Poly, San Luis Obispo. The redesign aligned the wall with the adjacent Engineering West building. The original concrete wall was designed with jagged recesses to accommodate large trash bins. These recesses no longer serve their intended function due to the permanent relocation of these bins. The replacement CMU low lift grouted wall optimizes courtyard space, enhances aesthetic cohesion, and maintains architectural features consistent with the existing structure. The following report outlines the process necessary to complete this project, including the permitting process, …

Experimental Characterization And Finite Element Analysis Of The Effects Of Pitting Corrosion On The Mechanical Properties Of Stainless Steel, Duncan Jay Fure, Long Wang

Master's Theses

Many structures do not fail from poor design, but instead from environmental degradation. Corrosion is one mode whose effects can be diminished, but not eliminated, by employing corrosion resistant materials, such as 304 stainless steel, which are still subject to pitting corrosion. Pitting corrosion is a chemical process of the localized removal of material leaving cavities. Despite the prevalence of pitting corrosion, there has been limited testing conducted of the effect of stress during corrosion. This study conducted accelerated controlled corrosion experiments with and without mechanical loading and various corrosion times. Pit morphology of different conditions was analyzed with statistical …

Evaluation Of Damages And Economic Losses In Light-Frame Timber Houses, Mason P. Leonard

Master's Theses

This thesis aims to evaluate the damages and economic losses in light-frame timber houses by designing and constructing a two-story, full-scale, fully equipped, code conforming timber assembly. Specifically, the structure will be analyzed based on how the non-structural components (NSC) like gypsum wallboard, interior doors, windows, and sliding patio doors as well as structural components like light-frame timber shear walls impact the economic losses.

Damage limit states were obtained from the Federal Emergency Management Agency (FEMA) P-58, Performance Assessment of Buildings to extract at what inter-story drift (ISD) ratio each damage limit state was expected to occur at. Fragility and …

Tettoia Iperbolica, Lydia Chou, Jack L. Walsh, William Jasper Mors, Simarjot S. Gandhoke, Ian F. Da Silva, Jamie L. Zimmerman

Architectural Engineering

Tettoia Iperbolica (Hyperbolic Canopy) is a multidisciplinary senior project created to revitalize an underutilized outdoor space next to the Architectural Engineering Building 21 at Cal Poly. The project responds to needs identified by faculty and staff, including limited gathering space, inadequate shading for the adjacent conference room, poor drainage, and a lack of ADA accessibility. Building on two previous senior project efforts, the 2025 team advanced the concept into a fully designed, structurally stamped, permitted redwood canopy supported by existing concrete columns and one new steel column.

The work included extensive site investigation to verify subsurface conditions, concrete strength testing, …

The Xenaform, Cassadie J. Golding

Architectural Engineering

The XenaForm explores how complex, expressive structures can emerge from simple, low-tech construction methods using principles of parametric design and structural geometry. By combining folded plate techniques with modular tetrahedral components, the project bridges high-tech digital modeling and hands-on physical fabrication. The result is a lightweight, buildable system that reclaims the engineer’s role as a form-finder.

Architectural Engineering Institute: International Student Design Competition 2025, Alexandra Marie Kersting, Alec Thomas Gibbs, Haley Francesca Sousa, Kline Genevieve Nickel

Architectural Engineering

The AEI International Student Design Competition is an annual competition held by the Architectural Engineering Institute that aims to replicate an integrated building design process. The 2025 Cal Poly team consisted of 4 Architectural Engineering students, each competing in the Structural and Integration disciplines. The team was provided a set of architectural drawings and a 3D architectural Revit model of Carson Headquarters in Omaha, Nebraska. The team was tasked with the creation of a complete structural design as well as a discussion of integration of other building design disciplines.

The Utilization Of Biodiesel In Commercial Equipment In Construction, Ryan Bustos

Construction Management

The utilization of heavy machinery is essential to the success of all construction projects, but the dependence of traditional diesel fuel contributes significantly to the carbon footprint of the industry. Biodiesel presents a cleaner, more sustainable alternative, yet its adoption across construction sites remains limited. This paper will examine the current use of biodiesel by contractors and explore key barriers preventing its implementation. A series of interviews with industry professionals responsible for fuel and equipment management were conducted to collect various insights and perspectives on the alternative fuel. This study focuses on identifying obstacles such as biodiesel cost, availability, compatibility, …

Concrete Patio Demolition And Construction, Tyler Nielsen

Construction Management

A 6.25 cubic yard unreinforced concrete patio was constructed for the non-profit organization. This project included three phases: concrete slab demolition, grading and formwork, and concrete pouring. Each phase was estimated and then received owner approval prior to execution. The demolition phase involved obtaining city permits for a roll-off container for debris removal. This phase also included two days of work with over 10 demolition crew members, who were given the required training and equipment to ensure safety and productivity. The following weeks included grading and setting up formwork. Once the grade was complete, the formwork was laid out and …

Renovations At The Ranch Slo, Brandon Garcia

Construction Management

This paper will follow the construction process for a project completed at The Ranch SLO in the spring of 2025 by two Cal Poly CM students. While the main reason for this paper is to follow construction processes, it will also address preconstruction and estimating associated with the project. The Ranch is a non-profit organization that provides a location where adults with disabilities can go and have recreational and employment training opportunities. The purpose of the project was to make renovations to an existing garden area and a chicken coop. The budget, planning, design, and construction means and methods were …

El Chorro Park Lumber Rack & Trailhead Kiosk Project, Nolan Christopher Gumm, Marvin Michael Garliepp

Construction Management

The EL Chorro Park Lumber Rack and Kiosk project was a collaboration with San Luis Obispo County Parks and Recreation. Located at El Chorro Regional Park in San Luis Obispo, California, the project involved building a 12-foot-long, 6-foot-wide, and 8-foot-tall lumber rack and reconstructing an outdated trailhead kiosk. The lumber rack addressed the need for organized storage of wood and metal pipes, while the kiosk was rebuilt to better serve park visitors. Recycled sheet metal from the client was used for the roof, and local suppliers were selected to support sustainability efforts. Funded entirely by a government entity, there were …

Untold Stories – Precast Concrete Bench Construction And Installation, Lucas Llodra

Construction Management

This paper outlines the design-build process led by an interdisciplinary team of Construction Management students from California Polytechnic State University, San Luis Obispo, to construct four concrete benches. In collaboration with faculty, concrete specialists, and the non-profit organization R.A.C.E. Matters, the project launched in Winter 2025. R.A.C.E. Matters initiated the effort by requesting the design and installation of benches at scenic, high-visibility locations managed by the San Luis Obispo Land Conservancy: Pismo Preserve, the Octagon Barn, and Kathleen’s Overlook. The full project scope included design development, structural calculations, prefabrication, on-site construction, and final installation. Each bench will serve as a …

Renovations At The Ranch Slo, Gerardo Valenciano-Valdivia

Construction Management

The Ranch SLO is a non-profit organization that hopes to aid adults with developmental disabilities by providing outdoor employment opportunities. In the ten-and-a-half-acre property, the employees engage in a variety of different activities, ranging from planting and growing different plants, to caring for farm animals. Some of the structures in the ranch have a long time in service and need reinforcing/renovations, this project focused on two main areas where renovations took place. The first area was a garden table area equipped with a total of 10 garden tables and a shade structure covering exactly half of the tables. The main …

Designing Augmented Reality (Ar) Simulations For Construction Scheduling Education: A Process-Based Approach, Luke Sutherland

Construction Management

This paper presents the design and implementation of an augmented reality (AR) testing protocol developed to assess construction students' planning, sequencing, and real-time decision-making skills. Using Microsoft HoloLens, the simulation exposed students to realistic jobsite scenarios that required them to interpret plans, develop task sequences, and respond to evolving conditions in the field. The protocol was conducted with over 30 construction management students at California Polytechnic State University, San Luis Obispo, and included three progressively complex scenarios focused on underground utilities, concrete formwork delays, and overhead MEP coordination issues. Data was captured through AR interaction logs, time tracking, instructor observation, …

Farm Furniture - City Farm Slo, Aiden Blackburn, Antonio Nunez

Construction Management

Our senior project was to build 4 picnic tables, 6 picnic benches, 2 vegetable tables, and 1 hexagon shaped table for the City Farm SLO in San Luis Obispo, CA. We were grateful to help a local farm who focuses on education in the community and sustainable agricultural practices. We first estimated the project and created a preliminary schedule. This project lasted from mid-April to mid-June. The first step in the process was to estimate the cost and develop a preliminary schedule. The process for constructing the different build types was relatively similar: acquire materials, cut to size, assemble, sand, …