Open Access. Powered by Scholars. Published by Universities.®

Civil and Environmental Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

California Polytechnic State University, San Luis Obispo

Discipline
Keyword
Publication Year
Publication
Publication Type

Articles 451 - 480 of 1728

Full-Text Articles in Civil and Environmental Engineering

Prague 2023 Summer Program Project Case Study, Jack T. Sampson Dec 2022

Prague 2023 Summer Program Project Case Study, Jack T. Sampson

Construction Management

The Prague 2023 Summer Program is a Construction Management based program that allows students to travel abroad to the Czech Republic and increase their Construction Management knowledge. The eight-week program is hybrid and split between four weeks in Prague followed by four weeks of virtual learning. This program contributes to nine units that include: CM-426 International Construction Studies, CM-463 Senior Project, and CM-450 Integrated Project Design and Program Management. The main purposes of this case study were to (1) find and evaluate a construction project to be used for the Prague 2023 Summer Program and (2) create an assignment schedule …

Go to article

The Current State Of Autonomous Construction Robots And The Challenges Of Adoption, Philip Lang Hu Dec 2022

The Current State Of Autonomous Construction Robots And The Challenges Of Adoption, Philip Lang Hu

Construction Management

Autonomous construction robotics is a field of technology that has not traditionally garnered much attention from the mainstream construction industry. The technology has remained relatively under the radar amidst an industry which has yet to experience a fundamental shift in the last several decades. While many industries have found a way to integrate robotics into their everyday functions, the construction industry has yet to standardize the use of robotics on jobsites. Driven by the recent pandemic and subsequent labor shortage, construction robots are now optimally positioned to demonstrate the benefits of flexibility, worker safety, and enhanced productivity and efficiency they …

Go to article

The Growing Trends In Prefabricated Commercial Construction In The Bay Area, Conner Edgar Dec 2022

The Growing Trends In Prefabricated Commercial Construction In The Bay Area, Conner Edgar

Construction Management

With the rise in demand for building greener and more efficient buildings, commercial construction companies, in the San Francisco Bay Area, are constantly finding new methods to keep up with new trends. Prefabricated construction has grown exponentially as a building method over the last decade in the commercial construction industry and continues to evolve and become more efficient. Many companies are resorting to prefabricated construction as it decreases time, expenses, and even the amount of waste on construction jobsites. It is important to realize what the future will hold for prefabricated construction while gaining knowledge of the benefits and disadvantages …

Go to article

Reality Capture Course Content: Exposing The Next Generation Of Builders To Technology Moving The Industry Forward, Maxwell S. Eisner Dec 2022

Reality Capture Course Content: Exposing The Next Generation Of Builders To Technology Moving The Industry Forward, Maxwell S. Eisner

Construction Management

This paper discusses the development and execution of lecture and laboratory educational content regarding reality capture technology and workflows. These educational modules were created to cover different use cases for reality capture technology that are currently being used in the construction industry. They also show how reality capture plays a role in the larger virtual design in construction (BIM) process. Importantly, these labs were designed to be completed with the LiDAR scanner on a typical iPhone, which has lowered the barrier to entry for reality capture education and use in industry. While the initial teaching of these courses was done …

Go to article

Bilingual Advantages To The Construction Industry, Miguel A. Duran Jr. Dec 2022

Bilingual Advantages To The Construction Industry, Miguel A. Duran Jr.

Construction Management

The purpose of this paper is to analyze and emphasize the importance of the Spanish language within the construction industry to construction management students at Cal Poly. Knowledge within another language is also used at an advantage in the industry as it increases one’s value through this key skill, and aids effective team communication on a project. Furthermore, the construction industry is filled with subcontractor’s majority being of Latin-based descent. Though this key skill is not required by companies, this skill can help verbal communication barriers which occur on a project when most subcontractors only speak the Spanish language. Verbal …

Go to article

Site Development Feasibility Study, Andy A. Tenekjian Dec 2022

Site Development Feasibility Study, Andy A. Tenekjian

Construction Management

A feasibility study in the world of construction is deemed as a preliminary due diligence process in which key components of a project are addressed to determine if the project is viable or not. These components are related to time and money, and the end goal of a feasibility study is to determine if the initial investment of time and money is worth the amount of future financial return. What deems a project successful in the preliminary stage is up for interpretation. Each developer and investor have their own return on investment threshold in a multi-family project like the one …

Go to article

Pull Planning Workshop - Central California Valley, Thomas A. Camargo Dec 2022

Pull Planning Workshop - Central California Valley, Thomas A. Camargo

Construction Management

Lean scheduling and pull planning are both excellent methods of scheduling and sequencing a project. It has made huge impacts on scheduling for general contractors in southern and northern region of California. However, Central California has not been able to see the benefits and impacts of these scheduling tools because of the regions lack of use of lean scheduling and pull planning. Lean scheduling is a technique that encourages communication and collaboration between the project stakeholders. Pull planning offers project stakeholders a chance to rally together and collaborate. These pull planning sessions are useful for sequencing work to meet milestones …

Go to article

Construction Management Outreach Event With The Pedrozzi Foundation, Jennifer Padilla Dec 2022

Construction Management Outreach Event With The Pedrozzi Foundation, Jennifer Padilla

Construction Management

The construction industry today continues to be a male-dominated field, often lacking diversity. The lack of diversity and inclusion is attributed to the lack of equitable access to the industry. As a result of continued efforts promoting diversity and inclusion, in August 2022, the construction industry reached an all-time high, with 14% of all construction workers in the U.S. being women. This construction management outreach event, in partnership with the Pedrozzi Foundation, was created to expose young scholars to the topic of construction management. At the event, students and their parents were exposed to the topic of construction management, learning …

Go to article

Shape Deformities In Recycled Concrete As A Substitute Aggregate In Concrete, Carson D. Timmerman Dec 2022

Shape Deformities In Recycled Concrete As A Substitute Aggregate In Concrete, Carson D. Timmerman

Construction Management

Concrete is a universal material that is used widely across the construction industry. Within a standard concrete mix, a fine aggregate and a coarse aggregate are added to the mix design to help with solidity and compressive strength in the mixture. The admixtures, additives, slump, and mix ratios will differ based on the compressive strength you're trying to attain. This paper directly reflects the results of the differences between shapes in recycled concrete used as a coarse aggregate substitute in concrete mixes. As the construction industry grows, so does outreach towards sustainability and reusing materials anywhere the industry can. Testing …

Go to article

Technological Integration To Enhance Jobsite Safety, Luke Barragan Dec 2022

Technological Integration To Enhance Jobsite Safety, Luke Barragan

Construction Management

The content derived in this paper portrays the effect that technology has on safety and how it may be enhanced and altered in the built environment. Ensuring safety on the jobsite is the most important aspect of concluding a successful project. Alongside safety on the jobsite is technology, both of which work coherently together to ensure proper construction. Technology has advanced tremendously in the built environment and it is difficult for all aspects of the project to be up to date universally. Safety lacks the technological integration that is found in the design and preconstruction phases of a project. There …

Go to article

Addition Of An Internship Prep Course To The Cm Curriculum, Zachary C. Boyle Dec 2022

Addition Of An Internship Prep Course To The Cm Curriculum, Zachary C. Boyle

Construction Management

The Cal Poly Construction Management program does an amazing job giving students opportunities to receive summer internships. Just about every student in the CM program will have some form of summer internship during their time at Cal Poly. All CM classes are designed to prepare students for internships. That being said, there is no specific class within the CM curriculum that is 100% Internship focused. Allowing students an opportunity to take a course that would focus on preparing them for their summer internships, students will be more confident and better equipped to take on the tasks of an intern at …

Go to article

Risks Involved With Helicopter Operations On A Remote Jobsite, Noah Hohenester Dec 2022

Risks Involved With Helicopter Operations On A Remote Jobsite, Noah Hohenester

Construction Management

Running a jobsite in a remote location adds unpredictable challenges and such experience is difficult to find. In mountainous terrain where road access is limited, the most efficient way to transport materials from the laydown yard to the jobsite is with a helicopter and a longline. Having an active helicopter on site comes with many detailed plans and preparations for safety risks, emergency evacuations, and lifting procedures. Many variables must be accounted for when getting a helicopter usage plan approved, and everyone in the field must be trained appropriately for any potential hazards. Projects like these are unique and many …

Go to article

Hiinga Hospital Project - Uganda, Africa, Arley W. Landis Dec 2022

Hiinga Hospital Project - Uganda, Africa, Arley W. Landis

Construction Management

This paper outlines the role of a construction management student in the interdisciplinary development of an urgent care clinic and hospital in Kampala, Uganda. This interdisciplinary team was composed of five students all belonging to the College of Architecture and Environmental Design at California Polytechnic State University in San Luis Obispo. The team was tasked by Hiinga Inc., a capital investment company, to provide a preliminary design and construction resources to aid with development of these facilities. Two construction management students worked on this project at different stages. The first student was tasked with constructability research and a preliminary estimate …

Go to article

Comparison Between Shipping Container Homes And Regular Stick-Built Homes In California, Levi Robert Krull Dec 2022

Comparison Between Shipping Container Homes And Regular Stick-Built Homes In California, Levi Robert Krull

Construction Management

The Research that was conducted was to examine the differences and similarities between shipping container construction and stick-built construction within residential homes in California. Shipping Container construction has grown in popularity and has continued to make its way into many different construction industries. I wanted to find the reasoning behind why this has continued to grow and if it could be a future way to construct Californian homes. This information could change how future homebuilders construct homes in California. This information could also provide a home that has a different cost, schedule, and features that could benefit the owner. After …

Go to article

Rainwater Catchment System Designed For California Polytechnic State University Building 34, Jonah S. Aere Dec 2022

Rainwater Catchment System Designed For California Polytechnic State University Building 34, Jonah S. Aere

Construction Management

California Polytechnic State University currently receives its water supply from either Whale Rock Reservoir, for distilled water, or pumped from six ground wells, for agricultural use. Although the university’s Agricultural College requires a certain amount of water to grow crops, these demands are often not met due to the lack of water within these underground wells. A rainwater capture system could be constructed to ease the water supply burden which is already depleting, reduce wasted drainage, and maintain a sustainable agricultural water source without being dependent on other locations. This would benefit the institution by reducing imported water thereby saving …

Go to article

Case Study On The Reduction Of Electrical Packaging To Help With Overall Construction Waste, Hailey Rodriguez Dec 2022

Case Study On The Reduction Of Electrical Packaging To Help With Overall Construction Waste, Hailey Rodriguez

Construction Management

The construction industry has a significant amount of waste accumulated on every job site. This study utilizes research on the types of materials that make up waste and the waste management strategies behind it. Waste materials range from building materials, such as lumber and steel, to packaging materials, like plastic and cardboard. This paper concentrates on material packaging and discovering ways to eliminate some of the construction waste before materials even arrive on the job site. A case study was performed on electrical lighting fixture packaging to observe and analyze the different amounts of waste accumulated. This examination focused on …

Go to article

Determining The Interest For A Drone Certification Course, Joel Alberto Ventura Dec 2022

Determining The Interest For A Drone Certification Course, Joel Alberto Ventura

Construction Management

The purpose of this study is to explore the interest of the Construction Management students at California Polytechnic State University, San Luis Obispo with drone usage and acquiring a drone license. This research paper analyzes students' prior skill sets that were gained from a past internship or class and if that exposure to drones is sufficient enough to apply those skills to the construction industry. Implementing a drone certification course will benefit both the students and companies in the construction industry. Within the construction industry there is a rise in popularity with using technology devices to track and collect data, …

Go to article

Techniques Against Language Barriers: A Company Case Study, Bryan W. Cruz Dec 2022

Techniques Against Language Barriers: A Company Case Study, Bryan W. Cruz

Construction Management

The United States construction industry employed approximately 10.8 million people in 2020. Of these 10.8 million, an estimated 3.3 million, or 30%, were Hispanic workers. On construction job sites, workers are exposed to numerous safety risks, including falls, struck-by incidents, and electrocution. Unfortunately, some Hispanics or workers with limited English language skills encounter language barriers which cause additional safety concerns. Language barriers impact their communication and comprehension abilities and, consequently, their safety. For example, workers who do not speak English do not benefit from safety training conducted purely in English; they also cannot read operation manuals for machinery and equipment …

Go to article

Use Of Gps And Smartgrade Technology In Heavy Civil Construction, Cristian Zarate-Ramirez Dec 2022

Use Of Gps And Smartgrade Technology In Heavy Civil Construction, Cristian Zarate-Ramirez

Construction Management

Heavy Civil is a sector in the construction industry involving a variety of different heavy machinery and construction practices. Technology has evolved as an important aspect in this sector striving to improve efficiency, productivity, and traditional construction methods. Global Positioning System (GPS) technology is one of the many technological advancements that benefit any size of contractor in the heavy civil industry. With the help of a 3D model, base station, and rover, contractors implement advanced building methods that provide excellent owner satisfaction. Similar to GPS, SmartGrade is a tool integrated into heavy machinery that enhances performance without the need of …

Go to article

Researching The Demand Of A New App That Reinvents The Way General Contractors And Subcontractors Communicate, Biko Kavalam Dec 2022

Researching The Demand Of A New App That Reinvents The Way General Contractors And Subcontractors Communicate, Biko Kavalam

Construction Management

This is a research study on the need for a new service that increases efficiency and profit for commercial construction companies. Contractors need an efficient way to hire subcontractors; through detailed and thorough research, we have found a way to make that possible. The research methodology used for the duration of the project is presented. This included contacting general contractors, subcontractors, and owners and discussing in detail the demand for a service like the one proposed. From these discussions, themes like credibility, understanding the market, and finding the right audience were recorded. The results that were obtained reassured us that …

Go to article

Investigation Of Temperature, Solution Strength, And Applied Stress Effects On Cation Exchange Processes In Geosynthetic Clay Liners, Kurt Katzenberger Dec 2022

Investigation Of Temperature, Solution Strength, And Applied Stress Effects On Cation Exchange Processes In Geosynthetic Clay Liners, Kurt Katzenberger

Master's Theses

A laboratory test program was conducted to investigate the effects of temperature, solution strength, and applied stress over increasing conditioning durations on cation exchange processes in sodium bentonite (Na-B) geosynthetic clay liners (GCLs). The test program was intended to determine if the variables of temperature, solution strength, and applied stress had beneficial or detrimental effects on the engineering behavior of Na-B GCLs in municipal solid waste (MSW) landfills and laboratory testing applications. Needlepunched-reinforced, double non-woven Na-B GCL specimens were conditioned in fluids of increasing ionic strength (DI water, 2 mM CaCl2, 50 mM CaCl2, and 200 mM CaCl2 representing control, …

Go to article

Evaluating Smartrock Temperature Sensor Performance In Measuring Concrete Strength, Jack Dasch Nov 2022

Evaluating Smartrock Temperature Sensor Performance In Measuring Concrete Strength, Jack Dasch

Construction Management

Concrete testing is one of the most important parts of the concrete placement process. Traditionally, this is done through the use of 6x12 cylinders cured in a lab that are broken at various stages of the curing process. These cylinders are not necessarily representative of the in-situ concrete because of their differing curing conditions- indoors versus exposed to the elements. Wireless temperature sensors, like Giatec’s SmartRock, have the potential to determine concrete strength based off the temperature of the placed concrete over time, thus eliminating the need for cylinder breaks. Once calibrated to the specific mix design, these wireless sensors …

Go to article

Fabrication Of Thin-Film Composite, Reverse-Osmosis Membranes With Polyethylenimine Modifications For Enhancing Membrane Fouling Resistance, Stephanie N. Hamilton Nov 2022

Fabrication Of Thin-Film Composite, Reverse-Osmosis Membranes With Polyethylenimine Modifications For Enhancing Membrane Fouling Resistance, Stephanie N. Hamilton

Master's Theses

Increasing water reuse opportunities for communities has become increasingly important as access to clean water is becoming more scarce. Reverse Osmosis (RO) is an advanced treatment technology used in water recycling wastewater for potable reuse applications. RO is a promising technology; however, the membranes have limitations including their high energy demand and their susceptibility to membrane fouling. The main objective of this study was to develop a reproducible method for the fabrication of RO membranes with enhanced flux and reduced susceptibility to fouling. Literature contains numerous publications on fabrication of thin film composite (TFC) RO membranes with high performance. However, …

Go to article

Comparison Study Of Laboratory Testing Programs Exploring The Influence Of Initial Static Shear Stress On Liquefaction Triggering, Micaela Saqui Oct 2022

Comparison Study Of Laboratory Testing Programs Exploring The Influence Of Initial Static Shear Stress On Liquefaction Triggering, Micaela Saqui

Master's Theses

Current state of practice for calculating liquefaction triggering and deformations is outlined in multiple published articles (Seed 1971, Youd et al. 2001, Idriss and Boulanger 2008, National Academies of Sciences 2016, etc.). These methods use a factor of safety analysis with the cyclic stress ratio (the cyclic stress caused by the earthquake normalized by the effective vertical stress in the soil) and the cyclic resistance ratio (the resistance of the soil normalized by the effective vertical stress in the soil). These cyclic ratios are calculated first for free-field sites (no external forces on the soil), then correction factors are used …

Go to article

Removing Soluble Phosphorus From Tertiary Municipal Wastewater Using Phosphorus- Deprived, Filamentous Microalgae, Aloysia Ahern Sep 2022

Removing Soluble Phosphorus From Tertiary Municipal Wastewater Using Phosphorus- Deprived, Filamentous Microalgae, Aloysia Ahern

Master's Theses

Harmful algal blooms (HABs) can be detrimental to ecosystems, human health, and economies. The low levels of phosphorus remaining in the effluent of municipal wastewater treatment plants can contribute to HAB formation. To achieve more complete phosphorus removal, an effluent treatment method has been proposed that uses phosphorus-deprived, filamentous microalgae to quickly assimilate soluble phosphorus to low concentrations. This study investigated two parameters that influence the feasibility of such a system: (1) the biomass growth productivity of algal cultures during the phosphorus deprivation period and (2) the correlation between the duration of this period and the phosphorus uptake rate by …

Go to article

Differing Moisture Content In Concrete And Mitigation Methods: Research Of Sacramento, Taylor S. Tonda Sep 2022

Differing Moisture Content In Concrete And Mitigation Methods: Research Of Sacramento, Taylor S. Tonda

Construction Management

The city of Sacramento and its concrete foundations face one of the most challenging conditions in the flooring industry, high RH Moisture. RH Moisture or Relative Humidity Moisture is one of the main causes for flooring systems to fail. The source of High RH Moisture consists of surrounding geographic features like rivers, flood plains, and elevation, as well as improper or nonexistent use of a vapor barrier beneath the concrete foundation. Mapping and other data is used to support these claims. If a flooring system is not properly prepared for high RH Moisture levels, issues such as bubbling, delamination, and …

Go to article

Construction Of Modular Concrete Footings For Use In Cal Poly’S High Bay Laboratory, Tyler W. Giddens Sep 2022

Construction Of Modular Concrete Footings For Use In Cal Poly’S High Bay Laboratory, Tyler W. Giddens

Construction Management

This project-based senior project had the end goal of creating two concrete modular foundations that can be used in the High Bay Laboratory for testing procedures. The concrete modular blocks are 6’ long by 3’ wide, and 1.5’ tall. The foundations each held 100 embeds. Each embed serves as an anchor point for various attachments for testing purposes. This was an interdisciplinary project amongst two CM students and one ARCE student. The ARCE student was responsible for the design of the blocks, encompassing the formwork and the rebar. The CM students were responsible for estimating, scheduling, and the construction of …

Go to article

Analysis Of Current And Future Flood Hazard In The Sacramento-San Joaquin Delta, Nicholas L. Mcguire Sep 2022

Analysis Of Current And Future Flood Hazard In The Sacramento-San Joaquin Delta, Nicholas L. Mcguire

Master's Theses

The primary motivation of this study is to estimate the current and future flood hazard throughout the Sacramento-San Joaquin Delta in the context of sea-level rise. I also analyzed the effects of storm surge and river flow on extreme events to better understand how these events originate and vary spatially and in time. To address this goal, I combined digital water level records (primarily 1983-present) with archival data collected by the California Department of Water Resources (1929-1983) to reevaluate flood hazard in the Delta and investigate the possible sensitivity of the region different sea-level rise projections. Available archival records from …

Go to article

Utilizing Prefabrication In Order To Achieve Leed Credits, Phillip E. Waldman Aug 2022

Utilizing Prefabrication In Order To Achieve Leed Credits, Phillip E. Waldman

Construction Management

This paper is a dissertation on the concept and benefits of utilizing panelization in construction to achieve LEED credits. Panelization is the process of prefabricating construction framing materials, such as walls, floors, and roof systems, to streamline and improve the construction process. This dissertation aims to examine: (1) how prefabrication can optimize construction through effective waste management (2) how prefabrication manufacturing plants are more efficient, cost-effective, and better for the environment with regard to material use and recycling than traditional construction methods (3) how prefabrication can be used to obtain LEED credit points for the Construction and Demolition Waste Management …

Go to article

Typical Demolition Waste Of Tenant Improvement Projects: A Case Study, Gregory K. Jameson Aug 2022

Typical Demolition Waste Of Tenant Improvement Projects: A Case Study, Gregory K. Jameson

Construction Management

Sustainable approaches to the waste generated in construction demolition have been on the rise over the past two decades. In this case study research project, the demolition waste of commercial tenant improvement projects from two separate companies across multiple projects was documented and analyzed. This case study was inspired by a motivation to gain a better understanding of what waste is typical in tenant improvement remodels, what is being done to repurpose this waste and what obstacles currently stand in the way of better waste management practices. After conducting extensive research and analysis of current waste trends in the construction …

Go to article

First Prev Next Last