Open Access. Powered by Scholars. Published by Universities.®

Civil and Environmental Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Transportation Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 601 - 630 of 5920

Full-Text Articles in Civil and Environmental Engineering

Reasearch On Fatigue Failure Law In Tension‑Shear Zone Behind Wheel In Rigid And Flexible Composite Pavement, Cheng Xiaoliang, Deng Fuhao, Wang Yang, Han Leilei, Zhou Wujun May 2024

Reasearch On Fatigue Failure Law In Tension‑Shear Zone Behind Wheel In Rigid And Flexible Composite Pavement, Cheng Xiaoliang, Deng Fuhao, Wang Yang, Han Leilei, Zhou Wujun

Journal of China & Foreign Highway

In order to study the slippage mechanism of asphalt concrete overlay on continuous reinforced concrete composite pavement （CRCP），the structure of the composite pavement was modeled using the elastic layered system，and the interlayer bonding state of the model was calibrated by the measured data of the road.In the analysis of interlayer mechanical behavior，it was found that when the horizontal force coefficient was 1，there existed a tension-shear zone behind the wheel，which may lead to the failure of this zone prior to the position of the maximum interlayer shear stress.Relevant test data analysis shows that when the horizontal force coefficient is 1，under the …

Go to article

Experimental Research On Anti-Uv Aging Performance Of Tire Pyrolysis Carbon Black （Tpcb） Modified Asphalt, Yang Wansheng, Yi Shuaibing, Dai Tianle, Li Tiantian, Gan Youwei May 2024

Experimental Research On Anti-Uv Aging Performance Of Tire Pyrolysis Carbon Black （Tpcb） Modified Asphalt, Yang Wansheng, Yi Shuaibing, Dai Tianle, Li Tiantian, Gan Youwei

Journal of China & Foreign Highway

To investigate the anti-ultraviolet （UV） aging performance of waste tire pyrolysis carbon black （TPCB）-modified asphalt，TPCB-modified asphalt was prepared and subjected to UV aging tests alongside the base asphalt at various intervals.The micro changes and surface roughness of two kinds of asphalt surfaces were studied by atomic force microscopy （AFM）.The behavior changes in ductility，softening point，and penetration of two asphalts before and after UV aging were tested by asphalt performance tests.The results show that the reduction height of TPCB-modified asphalt is smaller than that of base asphalt，and the surface roughness is larger than that of base asphalt at each time.The performance change …

Go to article

Structure And Material Of Rigid‑Flexible Composite Pavements And Development, Liu Zhaohui, Huang You, Yu Shiqing, Liu Jingyu, Li Sheng, Liu Li, Pan Yu May 2024

Structure And Material Of Rigid‑Flexible Composite Pavements And Development, Liu Zhaohui, Huang You, Yu Shiqing, Liu Jingyu, Li Sheng, Liu Li, Pan Yu

Journal of China & Foreign Highway

The rigid-flexible composite pavement，as a kind of durable pavement structure，has been widely used for heavy-duty traffic，special geological conditions，bridge tunnel paving，etc.In order to promote the application of durable rigid-flexible composite pavements and clarify the key research issues and development directions，relevant research progress of rigid-flexible composite pavements in China and abroad was reviewed.Based on the structure design theory and construction technology of rigid-flexible composite pavements，the structural mechanical behavior characteristics of rigid-flexible composite pavements were described，and the stress induced by load and temperature of asphalt surface layer and rigid base layer，as well as their interactions were analyzed.The asphalt surface layer on the rigid …

Go to article

Experimental Study On Double‑Mixture Solidification And Ratio Optimization Of Dredger Fill Sludge, Qin Liang, Chen Zhimin, Lu Yongfei May 2024

Experimental Study On Double‑Mixture Solidification And Ratio Optimization Of Dredger Fill Sludge, Qin Liang, Chen Zhimin, Lu Yongfei

Journal of China & Foreign Highway

In order to study the optimal r atio of cement and calcium oxide by double-mixture solidification for improving dredger fill sludge，the soil modification results by double-mixture solidification were analyzed based on orthogonal experiments.Finally，the fuzzy comprehensive evaluation method was used to quantitatively optimize each ratio scheme.The results show that：① Under the same addition ratio （addition amount of 1.0%‒4.0%），there is a positive linear correlation between the optimal moisture content and the addition amount，and there is a negative linear correlation between the optimal moisture content and the maximum dry de nsity.Under non-equal addition ratios，the law is not obvious.However，compared to cement，the water-reducing effect of …

Go to article

Road Performance Of Reclaimed Asphalt Mixture Mixed With Bagasse Fibers And Rubber‑Modified Asphalt, Jiang Xin May 2024

Road Performance Of Reclaimed Asphalt Mixture Mixed With Bagasse Fibers And Rubber‑Modified Asphalt, Jiang Xin

Journal of China & Foreign Highway

Given the potential resource value of rec laimed asphalt pavement，waste rubber powder，and bagasse fibers，it is meaningful to develop the cooperative utilization of various solid wastes.This paper studied the microstructure and thermal characteristics of bagasse fibers，carried out the mix design of a reclaimed asphalt mixture with bagasse fibers and rubber-modified asphalt，and evaluated its road performance.At the same time，the test road was paved successfully and observed for a time.The results show that the hollow lumen with multilayer fiber structure in bagasse fibers contributes to absorbing free asphalt in mixtures and enhances the adhesion between bagasse fibers and asphalt.The thermal properties of bagasse …

Go to article

Feasibility Of Sandstone Used In Asphalt Pavement Of Expressways, Lou Jianmin, Meng Xiandong, Song Zhike, Zhao Lidong, Bai Julong, Zhao Shengli, Zhu Jishuang May 2024

Feasibility Of Sandstone Used In Asphalt Pavement Of Expressways, Lou Jianmin, Meng Xiandong, Song Zhike, Zhao Lidong, Bai Julong, Zhao Shengli, Zhu Jishuang

Journal of China & Foreign Highway

In order to explore the feasibility of applying sandstone in the asphalt pavement of expressways，the physical and mechanical indexes of sandstone and limestone aggregate were compared，and the high temperature performance，low temperature performance，and water stability of asphalt mixture were studied from the aspects of grading type，asphalt type，and aggregate lithology.The results show that the road performance of asphalt mixture synthesized by clean and regular sandstone aggregate meets the requirements of current specifications.At the same time，the comprehensive road performance of sandstone asphalt mixture with 1% anti-stripping agent has been improved.

Go to article

Key Construction Techniques For Emended Cap Unsealed Bottom Of Deep‑Water Hard Rock, Zeng Jian, Guan Xiaohui, Guo Zhiwei May 2024

Key Construction Techniques For Emended Cap Unsealed Bottom Of Deep‑Water Hard Rock, Zeng Jian, Guan Xiaohui, Guo Zhiwei

Journal of China & Foreign Highway

In the construction of a deep-water embedded cap foundation，it was required to excavate the mud surface to the depth below sealing concrete and clean the bottom carefully，ensuring the height and quality of bottoming concrete.For hard rock under good geological conditions，there exist such problems as difficulty in excavation，long excavation time consumption，and high construction cost.Based on the construction of the main pier caps of the Chongqing Jiahua Metro Bridge，this paper adopted the method of combining theoretical analysis，numerical calculation，and engineering implementation verification，which developed an emended cap unsealed bottom key construction techniques for deep-water hard rock.This construction technology used the method of excavating the …

Go to article

Influence Of Blasting Point Position And Foundation Pit Height On Blasting Vibration During Foundation Pit Blasting Excavation, Liu Kuan, Xu Zhihao, Tang Yuan, Shen Jun, Bao Xiaohua, Shen Pinghuan, Ou Yang May 2024

Influence Of Blasting Point Position And Foundation Pit Height On Blasting Vibration During Foundation Pit Blasting Excavation, Liu Kuan, Xu Zhihao, Tang Yuan, Shen Jun, Bao Xiaohua, Shen Pinghuan, Ou Yang

Journal of China & Foreign Highway

In view of inaccurate vibration prediction of foundation pit blasting，the influence of blasting point position and foundation pit height on vibration during foundation pit blasting excavation was studied by using finite element simulation software.First，based on the foundation pit blasting excavation of the Mawan Cross-Sea Passage，a numerical simulation was carried out to verify the applicability of the model.Then，under unchanged blasting center distance，the distance from the blasting point to the edge of the foundation pit and the foundation pit height were changed respectively，and the influence of these two factors on surface vibration was studied.The results show that a greater distance from the …

Go to article

Excavation Method For Ⅴⅴ‑Grade Surrounding Rock Of Double‑Hole Eight‑Lane Super‑Long‑Span Tunnel, Shi Youzhi, Liu Xudong, Yong Jinzhu May 2024

Excavation Method For Ⅴⅴ‑Grade Surrounding Rock Of Double‑Hole Eight‑Lane Super‑Long‑Span Tunnel, Shi Youzhi, Liu Xudong, Yong Jinzhu

Journal of China & Foreign Highway

In order to reduce the adverse effect of back heading blasting on the completed supporting structure at the entrance of a double-hole eight-lane super-long-span tunnel with Ⅴ-grade surrounding rock，the Niuzhaishan tunnel project in Pingtan was taken as an example.The original design of the double-side heading method is easy to cause the collapse of the temporary steel support that has been completed when blasting happens near the back heading.In view of this，this paper put forward scheme 1 of canceling the temporary transverse support and the up-and-down step method with vertical support （scheme 2）.It then used the finite element method to calculate …

Go to article

Design And Evaluation Of Land‑Saving And Beautiful Median Barriers, Li Jingjun, Wa Ng Xin, Qi Jie, Wang Zijian, Liu Siyuan May 2024

Design And Evaluation Of Land‑Saving And Beautiful Median Barriers, Li Jingjun, Wa Ng Xin, Qi Jie, Wang Zijian, Liu Siyuan

Journal of China & Foreign Highway

During the construction and expansion of expressways and national and provincial highways，more diversified requirements have been put forward for the median barrier，including reliable protective performance，small footprints，beautiful traffic environments，and economic costs.However，the existing median barrier achievements still have some shortcomings.In order to better meet the design and use needs of median barriers for highways，theoretical analysis，computer simulation，and full-scale impact tests with real vehicles were adopted，and the force characteristics of different types of median barriers were analyzed.A new design concept of beam-column integration was put forward.Through systematic research on the barrier height，width，beam，column，foundation，and other structures，a land-saving and beautiful median barrier was developed.The median barrier had …

Go to article

Multi-Region Plane Fitting Algorithm For Texture Depth Of Asphalt Pavements, Zhu Feng, Feng Xingle, Wu Chuan, Lin Xiaoyong May 2024

Multi-Region Plane Fitting Algorithm For Texture Depth Of Asphalt Pavements, Zhu Feng, Feng Xingle, Wu Chuan, Lin Xiaoyong

Journal of China & Foreign Highway

The existing calculation methods for texture depth of asphalt pavements are easily affected by external and human factors.Therefore，a multi-region plane fitting algorithm for the texture depth based on three-dimensional （3D） linear laser data was proposed.The algorithm preprocessed the collected 3D height data matrix of the pavement and derived a slope-based adaptive filtering algorithm for point cloud data.Then, the 3D height matrix was divided into multiple regions，and the local extremum of the center point was determined.Finally，with the three-point and one-surface plane fitting algorithm as the core，the texture depth of asphalt pavements was calculated.The experimental results show that the correlation between this …

Go to article

Key Technology And Numerical Simulation Of Cast‑In‑Place Construction Of Main Arch Ring Of Reinforced Concrete Arch Bridge Based On Suspension Steel Arch Method, Su Xueping, Xia Zhengzhi, Lyu Songgang, Duan Pengjie, Lyu Yigang May 2024

Key Technology And Numerical Simulation Of Cast‑In‑Place Construction Of Main Arch Ring Of Reinforced Concrete Arch Bridge Based On Suspension Steel Arch Method, Su Xueping, Xia Zhengzhi, Lyu Songgang, Duan Pengjie, Lyu Yigang

Journal of China & Foreign Highway

Steel arch frame replaced such construction methods as floor bracket or segment cantilever assembly and it was applied to arch circle cast-in-place across deep water canyons in mountainous areas，which had certain advantages and was worth promoting and applying.By introducing the key construction technologies of Sanchahe Bridge，including steel arch frame cantilever fastener method assembly，arch water tank method precompression，and main arch ring layered pouring，the common problems in the construction process of crossing the deep water canyon were solved effectively.Based on Midas Civil overall modeling of finite elements，the key construction technologies adopted by the bridge were numerically simulated and analyzed，and the successful construction …

Go to article

Guardrail Improvement For Old Bridges In Expressways, Liu Xinping, Zhang Shihui, Shang Zhongping, Han Yue, Zhang Qiang May 2024

Guardrail Improvement For Old Bridges In Expressways, Liu Xinping, Zhang Shihui, Shang Zhongping, Han Yue, Zhang Qiang

Journal of China & Foreign Highway

In view of the insufficient protection grade of the guardrail in old bridges，a combined guardrail suitable for the low concrete wall guardrail in the old bridge was designed and developed by using finite element analysis while not damaging the main structure of the bridge.The protection grade was verified to reach SA grade through a full-scale vehicle collision test.The guardrail was designed with new high-strength alloy steel，with light weight and beautiful appearance.There was no need to dismantle the original concrete foundation in the old bridge，which is convenient for construction and requires low cost.Therefore，it is worth being popularized and applied in the …

Go to article

Improvement Of Gravelly Laterite And Cement Stable Disposal In West Africa, Jin Haibing, Yi Zicheng, Zhuo Rong May 2024

Improvement Of Gravelly Laterite And Cement Stable Disposal In West Africa, Jin Haibing, Yi Zicheng, Zhuo Rong

Journal of China & Foreign Highway

Owing to poor gradation and high liquid limit and plasticity index，the application of gravel laterite on road paving is limited in West Africa.To overcome this issue，laterite granule combined with sand at different content was explored.The performance including the particle composition，limit water content and CBR value was investigated.The results indicate that sand treatment can improve the gradation，enhance the compactness，and reduce the plasticity index.The improved gravel laterite can meet the requirements of subbase，cushion，and base courses.Cement treatment can improve the mechanical properties of laterite grains.Cement and sand content affect the unconfined compressive strength significantly，with an optimal sand content range identified.Specifically，laterite granules mixed with …

Go to article

Addressing Data Limitations Of Commercial Waterways Via Machine Learning And Stochastic Optimization, Sanjeev Bhurtyal May 2024

Addressing Data Limitations Of Commercial Waterways Via Machine Learning And Stochastic Optimization, Sanjeev Bhurtyal

Graduate Theses and Dissertations

Freight transportation is a crucial component of the US economy, with truck, rail, and water contributing significantly to the Gross Domestic Product (GDP). However, challenges arise in maintaining infrastructure capacity to accommodate the growing tonnage and value of freight transportation. Waterways offer high efficiency and environmental friendliness, with the capacity to transport substantial cargo volumes. Utilizing waterways can alleviate bottlenecks in landside transportation, accommodating the rising tonnage of commodity flow in the US. Despite the advantages of waterway transportation, the data limitations hinder informed decision-making regarding port operation and infrastructure investment. The lack of granularity and timeliness in available data …

Go to article

Investigating Rural Traffic Dynamics: A Traffic Study On E 2nd Street Intersection’S Behavior And Safety, Ma Anjelika Rose T. Pineda May 2024

Investigating Rural Traffic Dynamics: A Traffic Study On E 2nd Street Intersection’S Behavior And Safety, Ma Anjelika Rose T. Pineda

2024 Spring Honors Capstone Projects - Archive

Traffic studies guide engineers in designing road networks to ensure smooth traffic flow and public safety. Such studies assess the need for traffic control devices to manage vehicle flow safely and efficiently. This is crucial at intersections which pose high risks of collision and congestion. A traffic analysis at the intersection of Island Grove and E 2nd Street on the FM-4 roadway in Cleburne, TX was conducted to evaluate the sufficiency of the current traffic control device. TxDOT warrants and standards and a field study were utilized and performed to justify the substitution for a traffic signal at the intersection. …

Go to article

Emergency Vehicle Prioritization In Connected And Autonomous Traffic., Mohamadreza Haghani May 2024

Emergency Vehicle Prioritization In Connected And Autonomous Traffic., Mohamadreza Haghani

Electronic Theses and Dissertations

Reducing the response time of emergency vehicles (EV) is highly important due to the relationship between response time and fatality rate. Emerging technologies can help reduce response time by enhancing EV prioritization. On the other hand, EV prioritization can negatively impact general traffic especially in cross streets of signalized intersections. In this research, three main objectives were followed. Firstly, creation and dissipation of EVP disruption on arterial cross streets was studied to recommend solutions to prevent this disruption. Secondly, lane-changing and stopping behavior of CAVs were studied in EV prioritization to identify the best lane-changing behavior through minimizing delay. Thirdly, …

Go to article

Developing Guidelines For The Use Of Lightweight Materials In Culvert Preservation, Charlie Sun, Kean H. Ashurst Jr. May 2024

Developing Guidelines For The Use Of Lightweight Materials In Culvert Preservation, Charlie Sun, Kean H. Ashurst Jr.

Kentucky Transportation Center Research Report

This study addresses challenges that arise during highway embankment construction on road widening projects when additional fill is placed above existing culverts. Researchers conducted reduced-scale model laboratory tests to simulate culvert behavior under different loading conditions and to determine how well lightweight materials (LWMs) perform when subjected to changing loads. Testing showed that proximity of LWM to the culvert’s top surface strongly influences the magnitude of strain reductions or increases. Placing LWMs with relatively low elastic modulus closer to the culvert’s top surface led to reduced culvert ceiling strain and increased culvert wall strain. LWMs with relatively high elastic modulus …

Go to article

Addressing Multimodal Transportation Needs Through Complete Streets Implementation, Eirini Stavropoulou, Nikiforos Stamatiadis, William Staats, Teng Wang, Reginald Souleyrette May 2024

Addressing Multimodal Transportation Needs Through Complete Streets Implementation, Eirini Stavropoulou, Nikiforos Stamatiadis, William Staats, Teng Wang, Reginald Souleyrette

Kentucky Transportation Center Research Report

Since the early 2000s, over 1,600 transportation agencies in the United States have adopted Complete Streets policies. Recently, the Kentucky Transportation Cabinet (KYTC) published its Complete Streets, Roads, and Highways Manual, which aims to implement a safe and equitable transportation system throughout the state, as well as a Complete Streets policy. The manual and policy offer guidance on integrating Complete Streets principles into road design, however, KYTC currently lacks tools or methods to evaluate how well specific projects address Complete Streets goals. This is problematic because systematic assessments are needed to effectively prioritize projects and allocate scarce funding. Based …

Go to article

Estimation Of Benefits From Pedestrian And Bicycle Improvements, Dionysios Tzamakos, Nikiforos Stamatiadis, William Staats, Teng Wang, Reginald Souleyrette May 2024

Estimation Of Benefits From Pedestrian And Bicycle Improvements, Dionysios Tzamakos, Nikiforos Stamatiadis, William Staats, Teng Wang, Reginald Souleyrette

Kentucky Transportation Center Research Report

Delivering safe mobility for all users of the transportation system is a key priority of the Kentucky Transportation Cabinet (KYTC). Because many system users rely on pedestrian and bicycle facilities, it is critical for KYTC to balance pedestrian and bicycle facility accommodations with those for motorized users. Currently, the Strategic Highway Investment Formula for Tomorrow (SHIFT) — the Cabinet’s systematic approach to scoring and prioritizing proposed roadway projects — awards up to five points (out of a possible total of 100) for pedestrian and bicycle projects. But the agency lacks a robust method for estimating the benefits of pedestrian and …

Go to article

Balancing Environmental Clearances With Construction Work Zone Needs, Chris Van Dyke, Steve Waddle, Ying Li May 2024

Balancing Environmental Clearances With Construction Work Zone Needs, Chris Van Dyke, Steve Waddle, Ying Li

Kentucky Transportation Center Research Report

On small, single-span bridge projects (< 100 feet), the Kentucky Transportation Cabinet (KYTC) during project development works to establish an environmentally clear area (ECA) large enough to accommodate contractor operations. An adequately sized ECA gives contractors sufficient room to have materials delivered, park vehicles, store materials, and maneuver equipment around the project site (e.g., cranes, drill rig). If a contractor finds an ECA is too small to support their operations, they are responsible for obtaining additional environmental clearances. Clearing additional areas following the project award can slow down project delivery. To reduce the likelihood of contractors needing to enlarge an ECA, this report includes four documents KYTC can implement immediately to streamline and clarify the environmental clearances process. They include a checklist that project managers can use to coordinate the work of project team members and verify environmental clearances are on track, a combined environmental clearances workflow and best practices document for use by environmental subject-matter experts (SMEs), proposed language that can be inserted into project proposals that describes the environmental clearance process and specifies materials the Cabinet will hand off to contractors showing the location of the ECA, and a one-page explainer for contractors describing the environmental clearances process. Taken together, these deliverables emphasize the importance of early and ongoing coordination among project team members, clearing as much area as practical in and around bridges, and being transparent with contractors about their responsibilities.

Go to article

Dynamics Of Link Importance Across Flood Disaster Phases And Flood Impacts On Operation Of An Industry, Navin Bhatta May 2024

Dynamics Of Link Importance Across Flood Disaster Phases And Flood Impacts On Operation Of An Industry, Navin Bhatta

All Theses

Transportation damage and disruptions will become increasingly common as the frequency of floods increases due to climate change. Given the size and cost of the transportation network construction, communities' mitigation measures should be supported by evaluations that cover both normal and disaster management phases. This thesis examines the criticality of road segments in the normal, flood response, and recovery phases, considering the effects on emergency services, healthcare, industry, education, recreation, and transit and analyses that whether a flood disrupts the operational trips of a company in Anderson County, South Carolina. A 100-year event and a 500-year flood event provides context …

Go to article

Culvert Design And Roadway Restoration Of Cavett Road At Damon Creek, Kevin Harvey May 2024

Culvert Design And Roadway Restoration Of Cavett Road At Damon Creek, Kevin Harvey

Honors College Theses

Cavett Road is a small, two lane rural road located in Kirksey, Kentucky. This road faces the issue of flooding during light-to-moderate rain, posing risk to those who use the road, especially those living along Cavett Road. This flooding is also capable of washing away the surface of Cavett Road and the adjacent banks and soil wall of the creek, creating a risk of erosion and soil subsidence. To reduce the risk of flooding and erosion and improve roadway function, this project outlines a potential solution using newly-installed reinforced concrete box culverts and soil fill above them to improve the …

Go to article

Examining The Impact Of Customer Rfp Characteristics On Award Compliance, Laasya Ravipati May 2024

Examining The Impact Of Customer Rfp Characteristics On Award Compliance, Laasya Ravipati

Data Science Undergraduate Honors Theses

In the context of intermodal transportation, understanding the dynamics of award compliance holds significant importance for operational efficiency and strategic decision-making. Award compliance refers to the percentage of awarded freight volume that is realized, indicating the extent to which contractual agreements are fulfilled. This analysis delves into the intricate relationship between customer characteristics and award compliance, aiming to provide valuable insights into the variability and predictability of compliance rates. By analyzing Request for Pricing (RFP) data and primary awarded freight volumes, the study seeks to address the need for more accurate volume estimations, crucial for sales planning, revenue projections, and …

Go to article

Modeling Pedestrian And Bicyclist Crash Exposure With Location-Based Service Data, Yunwoo Nam, Jason Hawkins, Don Butler, Nicholas Aldridge, Mohammad Elayan, Kwant Il (Jason) Yoo May 2024

Modeling Pedestrian And Bicyclist Crash Exposure With Location-Based Service Data, Yunwoo Nam, Jason Hawkins, Don Butler, Nicholas Aldridge, Mohammad Elayan, Kwant Il (Jason) Yoo

Nebraska Department of Transportation: Research Reports

The rising popularity of non-motorized transportation has brought about safety risks. The inclusion of accurate traffic volume information is one of the key elements to produce robust outcomes when researching safety. The project investigates and enhances transportation safety for pedestrians and bicyclists, emphasizing the integration of Location-Based Services (LBS) data, particularly StreetLight data, to analyze traffic volume and associated risks. The calibration process demonstrates the significance of traffic volume as a key variable influencing prediction accuracy across pedestrian, bicyclist, and vehicle models. The crash analysis reveals a strong correlation between crash counts and traffic activity, with noteworthy findings emerging at …

Go to article

A Dedicated Lane Analysis For Supply Chain Resilience In The U.S.-Mexico Border: Cost-Comparison And Simulation Models, Carlo A. Zorola Gonzalez May 2024

A Dedicated Lane Analysis For Supply Chain Resilience In The U.S.-Mexico Border: Cost-Comparison And Simulation Models, Carlo A. Zorola Gonzalez

Theses and Dissertations

Supply chains have been actively developing and implementing strategies to enhance resilience in response to various disruptive events like the COVID-19 pandemic, hurricanes, geopolitical tensions, and climate change. These strategies aim to address demand and supply imbalances, logistical challenges, and policy restrictions encountered in transborder commerce. One area significantly impacted by such disruptions is cross-border trade between the US and Mexico. Understanding these strategies is crucial for achieving supply chain resilience, defined as the ability of a supply chain to quickly adapt to sudden disruptions without affecting the flow of goods. In both the US-Mexico and US-Canada borders …

Go to article

Final Design Of Legion Hall Revitalization In Potter, Nebraska, Madison Brennfoerder May 2024

Final Design Of Legion Hall Revitalization In Potter, Nebraska, Madison Brennfoerder

Honors Program: Senior Projects (Public)

This project was conducted to renovate and revitalize the Legion Hall community center in the Village of Potter located in western Nebraska north of the Interstate. The work completed for this project can be separated into five disciplines: Hydrologic & Hydraulic Design, Geotechnical Analysis, Structural Analysis, Environmental Analysis, and Transportation Design. Legion Hall is a historical building within The Village of Potter which was built in 1917. The Village of Potter has recently acquired the rights to the hall and is seeking to revitalize the historical community center to increase tourism in the village.

Go to article

Dynamic Impact Testing And Numerical Analysis Of Non-Proprietary Astm F2656-20 M50 Anti-Ram Barrier Components, Weston Kelley May 2024

Dynamic Impact Testing And Numerical Analysis Of Non-Proprietary Astm F2656-20 M50 Anti-Ram Barrier Components, Weston Kelley

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

In a post-9/11 world, hostile actors are using vehicles as weapons to inflict civilian casualties. Pedestrians, vulnerable road users, military personnel, and police may be targeted using a vehicle as a weapon. The United States Department of Defense (DoD) also utilizes Entry Control Facilities (ECFs) which are carefully designed transportation corridors to manage how threat vehicles are able to access military facilities. In 2004, DoD started to upgrade all ECFs using both passive and active barriers. Many anti-ram vehicle barriers were evaluated according to the criteria established in ASTM F2656, but to date few options are available which are (1) …

Go to article

Does California High-Speed Rail Promote Accessibility For Station Cities?: Case Study Of Fresno And Merced, Chih-Hao Wang, Na Chen May 2024

Does California High-Speed Rail Promote Accessibility For Station Cities?: Case Study Of Fresno And Merced, Chih-Hao Wang, Na Chen

Mineta Transportation Institute

California High-Speed Rail (CHSR) will largely change transportation cost across the state after it starts operating. Past studies show that only Fresno and Merced among station cities in the Central Valley would attract more future activities with the CHSR. The establishment of active CHSR also implies a new daily living sphere for all the station cities, and, therefore, accessibility to work and residential amenities should be reviewed to inform planners of future land-use and transportation developments. A research framework has been developed better to understand the impact of CHSR on job and amenity accessibility by driving, transit, and walking in …

Go to article

Impervious Surfaces From High Resolution Aerial Imagery: Cities In Fresno County, Yushin Ahn, Richard Poythress May 2024

Impervious Surfaces From High Resolution Aerial Imagery: Cities In Fresno County, Yushin Ahn, Richard Poythress

Mineta Transportation Institute

This study investigates impervious surfaces — areas covered by materials with restricted water permeability, such as pavement, sidewalks, and parking lots—due to their crucial role in influencing water dynamics within urban landscapes. The impermeability of these surfaces disrupts natural water absorption processes, resulting in adverse environmental consequences such as increased flooding, erosion, and water pollution. The research employs impervious surface analysis, a method involving the mapping and analysis of these surfaces within specified study areas, including cities, counties, and census tracts. Remote sensing techniques, specifically satellites and aerial imagery, are commonly utilized for the identification and classification of impervious surfaces. …

Go to article

First Prev Next Last