Civil and Environmental Engineering Commons^™

Segment Connection Mod E For Stiffening Girder Hoisting Construction Of Long‑Span Steel Truss Girder Suspension Bridge, Shao Guangmiao, Pan Q Uan, Yan Donghuang, Xu Hongsheng

Journal of China & Foreign Highway

In the process of stiffening girder construct ion of a long-span steel truss girder suspension bridge，different connection modes of stiffening girder segments will directly affect the internal force，alignment，and bridge state of the structure during construction.By taking the construction of the stiffening girder of a bridge as the research background，the finite element model of the whole process of the bridge was established.The advantages and disadvantages of the segmented hinge method and the segmented rigid connection method were compared，and the two-two segmented rigid connection scheme was proposed.On this basis，according to the changing law of steel truss section alignment and lower chord opening …

Linkage Control Method For Expressway Toll Stations And Plane Intersections, Lei Qing, Wang Zhaoyong, Wu Yurong, Jiang Weiwei, Luo Zhongbin

Journal of China & Foreign Highway

In order to solve the problem of vehicle queuing overflow caused by the mismatch between the expressway toll stations and the capacity of plane intersections，the formula for calculating the maximum queue length was given by analyzing the traffic operation characteristics between toll stations and plane intersections and considering vehicles ’ lane-changing behavior.Due to the strong coupling of the traffic operation between toll stations and plane intersections caused by a short distance between them，a unified linkage control optimization model was established.The research shows that if the queue length in the connecting direction of the plane intersections exceeds the allowable maximum queue …

Research On T‑Beam System With Diaphragm Based On Intelligent Construction, Liu Lang, Tao Qiyu, Xu Qigang

Journal of China & Foreign Highway

The traditional precast T-beam faces issues such as excessive diaphragms，difficult formwork installation and removal，and low levels of intelligence in intelligent bridge construction.To address these issues，this paper focused on the optimization of the number of diaphragms and the application of prefabricated diaphragms.By analyzing different diaphragm configuration schemes and comparing the contributions of prefabricated diaphragms and precast diaphragms to the lateral stiffness of the bridge，this paper deeply explored the impact of diaphragms on bridge performance.The research results indicate that the T-beam system with fewer diaphragms is feasible in intelligent construction，but the system without diaphragms places higher demands on the performance of bridge …

3d Reconstruction Method Of Tunnel Surrounding Rock Fracture Based On Vtk, Liu Houxiang, Su Heng

Journal of China & Foreign Highway

Fracture parameters are important reference factors for surrounding rock stability analysis.To realize the visualization analysis of surrounding rock fractures，this paper proposed a three-dimensional （3D） reconstruction method of surrounding rock fractures based on the visualization toolkit （VTK）.Firstly，the collected tunnel surrounding rock images were preprocessed by OpenCV for image grayscale and noise reduction.Secondly，the Otsu method and the open operation in morphology were used to segment the image，and the complete surrounding rock fracture map was obtained.Then，the median method was used to replace the linear interpolation method with the traditional Marching Cubes algorithm in VTK to calculate the equivalent point，and the improved Marching Cubes …

Experimental Study On Deformation Characteristics Of High Liquid Limit Soil Considering The Effect Of Temperature, Li Bangwu, Shen Xuning, Zhang Rui, Chen Yanrong

Journal of China & Foreign Highway

In order to study the influence of temperature on the absorbed bound water and deformation characteristics of high liquid limit soil，the high liquid limit soil in Hunan and Hainan provinces were selected for test.The influence of temperature on the content of bound water was measured by a temperature-controlled water bath volumetric flask test.The consolidation test was carried out on the samples with a one-dimensional temperature-controlled consolidometer，and the variation law of high liquid limit soil deformation affected by temperature was analyzed under the modified pore ratio considering the bound water content.The results show that the absorbed bound water in the high …

Surface Grouting Reinforcement Technology For Shallowly Buried Tunnel In Coastal Zone, Xiang Ze, Deng Shiping, Sheng Zhang, Zhou Ye, Wang Wei, Pei Yabing

Journal of China & Foreign Highway

The Ⅵ level surrounding rock section of a project water intake tunnel is located in the coastal zone，with thick overlying sand layers，broken surrounding rock，and other characteristics.To address these issues，laboratory tests were conducted to explore the effect of water glass volume dosing on the final setting time and strength of cement-sodium silicate （CS） liquid slurry，and field tests were carried out for a comprehensive analysis of grouting methods.The constraint-dispersion mode was finally determined to divide the grouting area into several small grouting units.Advance plastic pipe grouting reinforcement was performed according to the grouting sequence of the outermost circle hole interval first，followed by …

Comparison Analysis Of Different Settlement Prediction Models Under Small Post‑ Constructio N Load On Soft Foundation, Han S Hanpeng, Fu Wei, Zhang Junhui, Lin Chen

Journal of China & Foreign Highway

Settlement deformatio n is a key conc ern in soft foundation construction.Since there is still a small load applied after the filling of soft foundation in the actual project,based on the settlement monitoring data of the high-fill section of Zhaoyang West Ring Expressway in Zhaotong City,Yunnan Province,three settlement prediction methods,namely the hyperbolic method,the three-point method,and the Hoshino method,were used to predict,compare,and analyze the settlement of the fill foundation,and the fitting characteristics of each model were summarized.By comparing the fitting curves and the actual settlement curves,it was found that the loading on the roadbed will cause large errors in the prediction …

Dynamic Response Analysis Of Bridge Under Combined Action Of Random Traffic Flow And Wind Based On Simpack Platform, Xiong Tao, Han Yan, Ma Xingchuan, Li Qianming, Yan Naijie, Zhang Fei, Hu Peng

Journal of China & Foreign Highway

To deal with the time-consuming problem of calculating the dynamic responses of the bridge under the combined action of random traffic flow and wind，a steel box continuous girder bridge was taken as the engineering background，and the finite element model of the bridge and the vehicle model were established in the commercial software Ansys and SIMPACK，respectively.Then，the dynamic responses of the bridge subjected to the single vehicle load，wind loads，and multiple vehicle loads were calculated to verify the superposability of the dynamic responses of the bridge.On this basis，the Monte Carlo method was used to generate the random traffic flow samples.By using the verified …

Research Progress Of Rubber‑Modified Asphalt By Wet Process, Ge Dongdong, Jiang Xiangyang, Lyu Songtao, Zhang Honggang, Song Xiaojin

Journal of China & Foreign Highway

The application of waste tires in asphalt pavements can not only effectively reduce resource consumption but also significantly reduce environmental pollution.Crumb rubber could be obtained by processing waste tires and used as a modifier by mixing with asphalt through the wet process to improve the performance of asphalt.This paper reviewed the research progress of rubber-modified asphalt by wet process and discussed its preparation process，influencing factors of performance，and modification mechanism.By reviewing the relevant studies，the critical conditions in the preparation process and their effects on storage stability were summarized.Furthermore，the effects of rubber dosage，particle size，matrix asphalt type，and preparation parameters on the physical and …

Skid Resistance Detection Technology Of Highway Pavement Based On Tie‑Pavement Coupling Noise, Ye Wei, Chen Fei, Hu Xiaoyang, Xu Zhengwei, Li Liguo

Journal of China & Foreign Highway

In order to improve the skid resistance detection technology of highway pavement，this paper summarized the advantages and disadvantages of the traditional pavement noise measurement methods，adopted the vehicle-following method to collect the tie-pavement coupling noise，and optimized the specific positional parameters of the microphone.The speed correction of the equivalent continuous A-weighted sound level was realized through the fitting of driving speed and equivalent continuous A-weighted sound level.The characteristic signal of the tie-pavement coupling noise was extracted by the principal component analysis method，and it can effectively suppress interference signals such as traffic noise，wind noise，and engine noise.The envelope noise energy （ENE） was obtained by …

Effect Of Corn Stover Oil On Rheological Properties Of Aged Asphalt And Its Regeneration Effect, Cheng Peifeng, Bai Yue, Li Yiming, Zhang Zhanming

Journal of China & Foreign Highway

Corn stover oil，as a kind of bio-oil，is low-carbon and renewable.At the same time，it may restore the performance of aged asphalt.In order to further promote the application of corn stover oil in road engineering，this study explored the effect of corn stover oil as a kind of regeneration agent on the rheological properties of aged asphalt through laboratory experiments and analyzed the regeneration effect.On this basis，the regeneration mechanism of corn stover oil regeneration agent was revealed by using an infrared spectroscopy test and gel permeation chromatography test.The results show that the addition of corn stover oil changes the proportion of aged asphalt …

Research And Practice On Demolition Of Lane Separator In Same Direction Along Zhengzhou‒Luoyang Section Of Lianyungang‒Khorgos Expressway, Zhang Nan, Ji Xiang, Ma Gang

Journal of China & Foreign Highway

In order to solve the problem arising after the demolition and closure of the lane separator in the same direction along the expressway，this paper systematically introduced the reconstruction method of the lane separator in the same direction by studying the overhaul project along Zhengzhou-Luoyang section of Lianyungang‒Khorgos Expressway.The paper explored the main diseases and potential safety hazards existing in the lane separator in the same direction by checking the compliance of specifications，analyzing the traffic operation status，exploring the characteristics of traffic accidents，and investigating the traffic safety facilities.On this basis，it demonstrated the feasibility of demolishing the lane separator in the same direction.According …

Mechanical Properties Of Alkali‑Activated Slag‑Fly Ash Geopolymers, Liu Yang, Wang Jizhao, Lu Naiwei, Wang Bowen

Journal of China & Foreign Highway

In order to respond to the national strategy of energy saving and emission reduction and improve the comprehensive utilization rate of industrial waste，the influence of slag content，alkali equivalent，sodium silicate modulus，and water-cement ratio on the compressive strength of slag-fly ash geopolymers was investigated by single variable and orthogonal experiment method.The compressive strength of geopolymers was analyzed by combining XRD，SEM，and porosity.The results show that the gel formation is promoted with the increase in slag content，and the structure of geopolymers is more compact，which is conducive to the development of strength.After 28 days of standard curing，the influence of various factors on the compressive strength …

Mechanical Properties Of Geopolymer‑Stabilized Recycled Aggregates From Construction Solid Wastes, Yuan Kaixin, He Yongjian, Zhang Laijun, Li Hai, Xu Gewei

Journal of China & Foreign Highway

In order to solve the problem of a sharp increase in construction solid wastes and insufficient utilization rate，this paper took slag-fly ash-based geopolymer as an inorganic binder，replaced natural gravels with recycled aggregates from construction solid wastes，and set urban road base layer as the target scene to study the mechanical properties of geopolymer-stabilized recycled aggregates at different contents.The results show that with the increase in geopolymer content，the maximum dry density of the mixture increases.The optimum moisture content increases.The unconfined compressive strength of the mixture increases with the increase in geopolymer content and curing age and decreases with the increase in recycled …

Comparative Experimental Study On Deformation Characteristics Of High Liquid Limit Soil Under Different Dry And Wet States, Qin Lingwei, Zhang Rui, Li Lu, Xiao Yupeng

Journal of China & Foreign Highway

In order to further reveal the internal mechanism of the influence of solid-like bound water on the deformation characteristics of high liquid limit soil，the difference in the influence of different bound water contents on the deformation of soil samples was analyzed through the comparison of dry and wet sides.Four types of high liquid limit soil with different water contents at the same dry density were used，and a low liquid limit soil was used as a comparison sample to carry out a deformation test.The volumetric flask method was used to test the content of adsorbed bound water in each test soil …

Influence Of Loading Methods On Compression Modulus Of Red Sandstone Soil Solidified With Biological Enzyme And Cement, He Liang, Zhang Haixiang, Guan H Ongxin, Li Huili, Yang Hairong, Liu Hongfu

Journal of China & Foreign Highway

There are various methods to test the modulus of cement-stabilized mixtures.The stiffness performance of cement-stabilized materials will be affected after adding biological enzymes.In order to systematically analyze the influence of loading conditions on the compression modulus of the red sandstone soil solidified with biological enzyme and cement，compressive modulus tests were conducted on the red sandstone soil solidified with biological enzyme and cement by using three static modulus test methods including monotonic loading method of middle section，stepwise loading and unloading method of top surface，and stepwise loading and unloading method of middle section，as well as dynamic modulus method of top surface and …

Optimization Of Mix Proportion For New Jersey Precast Concrete Safety Barriers And Performance Tests Under Integral Concrete Vibrating, Chen Lin, Li Beian, Li Yuanrui, Zhao Zixiang

Journal of China & Foreign Highway

New Jersey safety barriers are the most commonly used form of guardrails in highway median separators due to their excellent safety protection.In response to the cost reduction and quality improvement，efficient and rapid preparation process，and quality issues of New Jersey precast concrete safety barriers，this article adopted the automation production process of New Jersey precast safety barriers，optimized concrete mix proportion for precast safety barriers，and studied their performance.The experimental results show that in the designed C 30 concrete，the compressive strength of the concrete mixed with 15% fly ash reaches 39.2 MPa，and th e slump reaches 185 mm.The concrete performance meets the requirements of …

Experimental Study On Shear Behavior Between Nrc‑Uhpc Interface, Chen Zhenkan, Li Junsheng, Shi Quan, Fang Haozhen, Mo Fan, Jiang Haibo

Journal of China & Foreign Highway

In order to investigate the effect of the screw diameter of planted bars and ultra-high performance concrete （UHPC） pouring method on the shear behavior of normal reinforced concrete （NRC） and UHPC， two groups of six push-out specimens were designed for shear behavior tests.The results show that after the failure of the concrete bonding force in the NRC-UHPC interface，the screw can maintain shear behavior so that the failure process of the specimen after the load reaches the peak shows ductile characteristics.For specimens with screw diameters of 12 mm and 16 mm，greater screw diameter indicates higher shear capacity of the specimens and …

Design And Construction Process Of Cross‑Beam Supports For Main Tower Of Changtai Changjiang River Bridge, Zeng Jian, Hu Pei, Wang Chao

Journal of China & Foreign Highway

The construction of the lower cross-beam structure of the main tower of Changtai Changjiang River Bridge has the characteristics of high construction height，large amount of concrete earth volume，and difficult control of down-warping deformation.In order to implement the pouring of the lower cross-beam of the main tower，floor-type steel pipe supports were set at the lower cross-beam，which were used to support the lower cross-beam formwork and bear the load during the concrete pouring.Through the finite element software analysis and calculation，it was found that the asymmetric deformation of the main structure of the lower cross-beam could be effectively controlled，and the overall force of …

Determination Of Manufacturing Parameters Of Large Section Of Continuous Steel Box Beam With Variable Section In Shenzhen‑Zhongshan Passage, Dong Chuangwen, Chen Long, Li Chuanxi

Journal of China & Foreign Highway

Accurate calculation of manufacturing parameters is the key to the efficient，high-precision，and rapid installation of large sections of continuous steel box beam bridges.Taking the steel box beam with the variable section in Shenzhen-Zhongshan Passage as the background，this paper first established a finite element model of the beam element in the whole construction process to obtain the pre-camper.Secondly，the average neutral axis position was calculated based on the height of the neutral axis of each beam section.Then，according to the deformation characteristic that the beam length remained unchanged at the mean neutral axis，the pre-camber was superimposed at the mean neutral axis to get the …

Key Technology For Construction Of New Single‑Wall Steel Suspended Box Cofferdam With High Pile Tied Beams In Deep Water, Yang Jinlong, Zhao Lin, Jiang Qunlong

Journal of China & Foreign Highway

In order to ensure the safe，efficient，and economical completion of the construction of the high pile tied beam of Muping Xiangjiang River Bridge in deep water，a new type of single-wall steel suspended box cofferdam was designed to act as the water retaining and enclosure structure during high pile tied beam construction according to the characteristics of deep water level and shallow stratum cover layer at the high pile tied beam location.Through the innovative design of steel casing on the bottom of the steel suspended box cofferdam，the design height of the wall panel and the amount of steel input were reduced.On the …

Influence Factors Of Carbonization Of Tunnel Segment Structure And Life Prediction Analysis, Li Dongbiao, Miao Miao, Shen Caihua, Chen Wei

Journal of China & Foreign Highway

There are many factors that affect the carbonization life of concrete segments in underwater tunnels，and the prediction methods are not uniform.In this paper，combined with actual engineering，the influencing factors and laws of carbonization of concrete segments in underwater tunnels were analyzed，and three methods for predicting the life of concrete segments were established with the crack limit as the control target.The prediction results of the three methods were compared.The results show that the influence of the temperature and CO2 concentration in the tunnel predicted by the three methods on the life of the tunnel lining structure is basically consistent with the existing …

Key Technology For Incremental Launching Construction Of Double Guide Beam Of Steel Box Girder, Sun Xiaoqiang, Yue Xinxing

Journal of China & Foreign Highway

By taking the incremental launching construction of the steel box girder at the 6th hole of the approach bridge of Baoji Taigu Bridge as the engineering background，the original plan adopted single-guide beam multi-point walking incremental launching technology for assembly and incremental launching on the prestressed reinforced concrete beam of the adjacent hole.Since the middle span of the concrete beam cannot withstand the concentrated force at the incremental launching points，the multi-guide beam multi-point walking incremental launching technology was finally used to arrange the incremental launching points at the transverse diaphragm plate of the end of the concrete beam.By increasing the incremental …

Emergency Vehicle Dispatching Model Considering Demand Urgency And Delivery Fairness, Long Kejun, Liu Jia, Gao Zhibo, Chen Suqian, Zhang Zhonggen

Journal of China & Foreign Highway

In emergency vehicle dispatching after unexpected events，it is crucial to prioritize critical nodes with high demand urgency while minimizing excessive delivery delays at other nodes to prevent secondary impacts.On this basis，this study developed an emergency vehicle dispatching model that considered demand urgency and delivery delay fairness.Firstly，the entropy weight-TOPSIS method was used to calculate the demand urgency for each node，and a delivery delay balance index was introduced to minimize disparities in delivery delays between nodes.Secondly，a multi-objective optimization model was established with total delivery time，overall cost，and delivery delay balance as objectives，while considering constraints such as inventory levels at distribution centers and route …

Working Properties Of Steel Tube Batter Piles With Concrete Infill Based On Abaqus, Yang Meiliang, Li Liemin, Sun Kunjiang, Han Rui, Zhong Yang

Journal of China & Foreign Highway

In order to explore the respons e characteristics of steel tube batter piles with concrete infill under vertical load，the steel tube batter pile with concrete infill used in Saribas Bridge in Malaysia was taken as the research object.Based on the numerical simulation method，the frictional resistance of the inner and outer walls of the steel tube，the frictional resistance around the pile at the section，and the bending moment bearing ratio between the steel tube and the concrete core of this type of batter pile under vertical load were studied.The results show that the passive-side frictional resistance of the 0–15 m pile section …

The State Of The City's Bridges, Leo G. Miranda

Capstones

An analysis by NYCity News Service of 2024 federal bridge inspection found that 118 segments of city bridges are in poor condition, around 8% of all bridges citywide. Among these are segments of major highways and bridges like the Brooklyn Queens Expressway, FDR Drive, Harlem River Drive, Grand Central Parkway and even a part of the iconic Brooklyn Bridge. On a single stretch of highway, where the Grand Central Parkway and the Whitestone Expressway meet in Queens, there are seven parts of highway or ramps in poor condition.

Bridge segments can be any raised roadway that passes over another parkway, …

Minimizing Take Of Threatened Rattlesnakes And Optimizing Project Review In Se Nebraska, Shaun Dunn, Dan Fogell, Colleen Rothe-Groleau

Nebraska Department of Transportation: Research Reports

The western massasauga (Sistrurus tergeminus) and the timber rattlesnake (Crotalus horridus) are protected under Nebraska Statute 37-801-811 and listed as threatened species. These species occur in the right-of-way (ROW) along several roads in Jefferson, Gage, Pawnee, and Richardson Counties which necessitates the need for added Environmental Review (ER) from Nebraska Department of Transportation (NDOT) staff and onsite surveys prior and during maintenance and construction to roadways. This project sought to minimize ER time, staff time, and increase the knowledge of these species in southeast Nebraska by:

1. Identifying precise locations of western massasauga brumation sites;
2. Mapping travel …

Assessment Of Pedestrian Safety At Roundabout Slip Lanes: A Study On Design Configurations And Surrogate Safety Measures, Norran Kakama Novat

Masters Theses

The implementation of slip lanes at roundabouts has been widely adopted to improve traffic flow and reduce vehicle conflicts. However, the presence of slip lanes introduces significant risks for pedestrians, influencing vehicle speeds, merging behaviors, and increasing the potential for pedestrian-vehicle conflicts. This study investigates pedestrian safety at roundabouts with various slip lane designs, focusing on their impact on vehicle speeds, pedestrian-vehicle conflicts, and yielding behavior. Also, the study evaluates commonly used surrogate safety measures by employing extreme value models to assess their efficiency.

The study addresses two primary objectives: (1) analyzing the effects of different slip lane configurations on …

Basic Safety Message Generation Through A Video-Based Analytics For Potential Safety Application, Abyad Enan

All Theses

With the advancement of modern artificial intelligence techniques, computer vision can play a vital role in enhancing roadway safety by reducing the risk of imminent collisions. To do so, a vision-based safety application is required, where a roadside camera can monitor the roadway traffic and predict potential risks of crashes in real-time. If any risky situation or behavior is observed that may lead to a crash, then a safety application can send warnings to the vehicles at risk. For vision-based safety applications on a roadway section, it is important to accurately monitor each vehicle’s location, speed, acceleration, heading direction, etc. …

Sustainable And User-Driven Scope Development Framework For Engineering Design Services Of Transportation Infrastructure Projects, Ahmad Zaki Ghafari

All Dissertations

Rapid economic growth has led to a significant increase in transportation demands, exerting unprecedented pressure on infrastructure systems in the United States. State transportation agencies play a vital role in maintaining and developing transportation infrastructure networks within their regions. State transportation agencies face immense pressure from federal and state governments, elected officials, and the public to deliver projects efficiently and within budget. State transportation agencies rely on professional consultants for engineering design services. Engineering design services for transportation infrastructure projects are delayed due to incomplete inaccurate scope. For state Department of Transportation (DOTs), a streamlined scope development process is essential …