Open Access. Powered by Scholars. Published by Universities.®

Civil and Environmental Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Transportation Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 31 - 60 of 5919

Full-Text Articles in Civil and Environmental Engineering

Study On Structural Design And Load Transfer Performance Of 6-Hole Flat Anchor Plate, Liao Yuanyuan, Ling Lihua, Wu Qibin, Cheng Bin, Dai Dongming Jun 2026

Study On Structural Design And Load Transfer Performance Of 6-Hole Flat Anchor Plate, Liao Yuanyuan, Ling Lihua, Wu Qibin, Cheng Bin, Dai Dongming

Journal of China & Foreign Highway

For negative bending moment prestressed tendons in simply supported-to-structurally-continuous bridges, the flat anchorage method of flange plate is more reasonable, but its widespread application is limited due to the anchoring capacity restrictions of flat anchor plates. To improve the anchoring capacity of a single anchorage zone, reduce the number of prestressed ducts, save concrete, and improve construction efficiency, a novel 6-hole flat anchor plate was developed, designed, and manufactured in this paper. By combining finite element analysis and experimental methods, a finite element analysis model of the concrete load transfer specimen beneath the novel 6-hole flat anchor plate was established, …

Go to article

Analysis Of Shear Bearing Mechanism And Influencing Factors Of Mcl-Shaped Composite Dowel Connector, Zeng Zhuo, Zhou Baicheng, Cheng Xianjie, Cao Zhengxing, Gao Rongxiong, Wang Zichao Jun 2026

Analysis Of Shear Bearing Mechanism And Influencing Factors Of Mcl-Shaped Composite Dowel Connector, Zeng Zhuo, Zhou Baicheng, Cheng Xianjie, Cao Zhengxing, Gao Rongxiong, Wang Zichao

Journal of China & Foreign Highway

To investigate the bearing mechanism of modified clothoid (MCL)-shaped composite dowel shear connectors and the influence laws of various factors on their shear bearing capacity, the stress states and failure modes of the steel dowel, concrete dowel, and transverse through-reinforcement that constitute the MCL-shaped shear connector were deeply analyzed in this paper based on an experimentally validated finite element model. Furthermore, the influence laws of transverse through-reinforcement, steel dowel thickness, and concrete strength on the shear bearing capacity of the MCL-shaped composite dowel were explored. The research results indicate that the bearing process of the MCL-shaped composite dowel exhibits elastic, …

Go to article

Research On Improving Bearing Capacity Of Full-Scale Prestressed Concrete Small Box Girders, Huang Jianyun, Gao Linli, Liu Zufeng, Ma Jinku, Ma Ming, Wang Xiaoguang Jun 2026

Research On Improving Bearing Capacity Of Full-Scale Prestressed Concrete Small Box Girders, Huang Jianyun, Gao Linli, Liu Zufeng, Ma Jinku, Ma Ming, Wang Xiaoguang

Journal of China & Foreign Highway

To solve the problems of lacking comparative research on the improvement effects of different reinforcement methods when formulating reinforcement schemes for prestressed concrete small box girders and that existing bearing capacity improvement tests mostly focus on scale models with insufficient reliability of results, full-scale model tests and numerical simulation analysis of five 30 m span prestressed concrete small box girders with different joint reinforcement measures were conducted in this paper. Finite element models for two single reinforcement measures were established, and the improvement effects of different reinforcement methods on the bearing capacity of prestressed concrete small box girders were studied. …

Go to article

Key Construction Technologies For Single-Tower Rotating-Cable Suspension Bridges With Steel Truss Girders In Mountainous Regions, Gao Shuangjian, Zhang Weichao, Fu Lihong, Zhu Shuo Jun 2026

Key Construction Technologies For Single-Tower Rotating-Cable Suspension Bridges With Steel Truss Girders In Mountainous Regions, Gao Shuangjian, Zhang Weichao, Fu Lihong, Zhu Shuo

Journal of China & Foreign Highway

Given the problems of narrow construction sites, difficult construction organization, and high safety and quality risks faced in the construction of bridges in steep canyon regions of mountainous areas, this paper carried out research on key technologies for bridge construction in mountainous areas based on the Yellow River Three Gorges Bridge of the Jiyuan‒Xin’an Expressway. For the excavation of deep and large anchorage foundation pits in mountainous areas, a technical scheme of “loosening controlled blasting combined mainly with mechanical excavation and supplemented by manual excavation” was adopted. As this project is a single-tower single-span ground-anchored rotating-cable suspension bridge, the technologies …

Go to article

Mix Proportion Design Of Tunnel Shotcrete Based On Diorite Manufactured Sand, Song Funing, Wang Zegang, Liu Naifei, Song Zhanping Jun 2026

Mix Proportion Design Of Tunnel Shotcrete Based On Diorite Manufactured Sand, Song Funing, Wang Zegang, Liu Naifei, Song Zhanping

Journal of China & Foreign Highway

Tunnel construction produces a large amount of waste slag, which cannot be effectively utilized due to various factors. By using tunnel slag to prepare manufactured sand to replace natural sand, resources can be saved; costs can be reduced, and the environment can be protected. Based on the Xi’an‒Shiyan high-speed railway project, the physical and mechanical properties of diorite along the tunnel were tested; the physical properties and concrete performance of manufactured sand and natural sand were comparatively studied, and the effects of water-binder ratio and sand ratio on the performance of shotcrete were analyzed by designing multiple sets of mix …

Go to article

Surface Deep Well Dewatering Methods For Tertiary Water-Rich Semi-Diagenetic Section Of Wangjiazhai Tunnel, Liu Chengwen, Liu Gang, Xu Hua, Wei Meng Jun 2026

Surface Deep Well Dewatering Methods For Tertiary Water-Rich Semi-Diagenetic Section Of Wangjiazhai Tunnel, Liu Chengwen, Liu Gang, Xu Hua, Wei Meng

Journal of China & Foreign Highway

The tertiary semi-diagenetic sandstone of the Wangjiazhai Tunnel on the Yunnan Linqing Expressway is characterized by loose structure, low diagenetic strength, and poor cementation. The geological disasters such as collapse, water gushing, and mud bursting are very easy to happen when the tunnel passes through the water-rich section. With the surface deep well dewatering of the tertiary water-rich semi-diagenetic section of Wangjiazhai Tunnel as an example, the surface deep well dewatering methods and key parameters for tunnel crossing the tertiary water-rich semi-diagenetic section were discussed. Based on the single well surface dewatering test, the groundwater level and strata permeability of …

Go to article

Ventilation Design And On-Site Effect Testing For Construction Of Multiple Working Faces In Tianshan Shengli Tunnel, Xiong Ziyi, Jia Haiyang, Suo Feiyu, Liu Weiwei, Chen Jianxun, Yang Ziyao, Wang Heqi Jun 2026

Ventilation Design And On-Site Effect Testing For Construction Of Multiple Working Faces In Tianshan Shengli Tunnel, Xiong Ziyi, Jia Haiyang, Suo Feiyu, Liu Weiwei, Chen Jianxun, Yang Ziyao, Wang Heqi

Journal of China & Foreign Highway

To explore the ventilation optimization and energy saving issues in the construction of multiple working faces in extra-long highway tunnels, the air volumes required for a single working face under drilling and blasting construction conditions and TBM tunneling conditions were determined respectively based on theoretical calculations. Combined with the tunnel construction organization scheme, two ventilation schemes were proposed, and they were compared and selected according to the configured power of axial fans. Based on the recommended scheme, the layout scheme of pollutant-discharging jet fans was designed, and its feasibility was finally verified by on-site measurements of pollutant concentrations. The research …

Go to article

A Prediction Method For Scale Of Karst Cave Water Inrush And Mud Outburst Based On Comprehensive Advanced Geological Prediction, Yang Weilin, Xiao Huabo, Meng Lubo, Zhang Caihong, Chen Weidong, Wang Hao Jun 2026

A Prediction Method For Scale Of Karst Cave Water Inrush And Mud Outburst Based On Comprehensive Advanced Geological Prediction, Yang Weilin, Xiao Huabo, Meng Lubo, Zhang Caihong, Chen Weidong, Wang Hao

Journal of China & Foreign Highway

To improve the accuracy of water inrush and mud outburst disaster prediction during tunnel construction through karst caves, a method of first forecasting the unfavorable geological conditions of karst caves and subsequently predicting water inrush and mud outburst geological disasters was proposed in this paper. First, a karst cave advanced prediction model based on the polynomial naive Bayes algorithm was established to predict the scale grade of karst caves. Secondly, taking the scale prediction results of karst caves as the input condition for water inrush and mud outburst, a support vector machine (SVM) grade prediction model for karst cave water …

Go to article

Research On Recognition Of Highway Toll Vehicles Based On Dual-View Feature Fusion Network, Xiao Qiang, Chen Xinjia, Chen Jing, Zhao Bin, Yan Kaifeng, Ding Hongwei Jun 2026

Research On Recognition Of Highway Toll Vehicles Based On Dual-View Feature Fusion Network, Xiao Qiang, Chen Xinjia, Chen Jing, Zhao Bin, Yan Kaifeng, Ding Hongwei

Journal of China & Foreign Highway

To solve the practical problems in vehicle type classification on toll roads, a deep learning network based on dual-view feature fusion, named ETCLNet, was proposed in this paper. A dual-branch architecture was adopted by the network to extract the features of vehicle head and side body images, respectively, and combined with an innovatively designed multi-scale feature extraction module, namely IPFE, and an adaptive weighting-based bilinear feature fusion (AWBF) mechanism, efficient and fine-grained vehicle feature representation was achieved. Through the design of parallel multi-scale convolutions and residual connections, the problem of gradient vanishing was effectively alleviated, and the adaptability to complex …

Go to article

Analysis Of Traffic Congestion Patterns In Continuous Bottleneck Construction Zones Of Highways Under Mixed Traffic Of Passenger And Freight Vehicles, Han Hailong, Song Tailong, Ma Tianyong, Fan Zhaodong, Chen Zhexin, Chen Liang Jun 2026

Analysis Of Traffic Congestion Patterns In Continuous Bottleneck Construction Zones Of Highways Under Mixed Traffic Of Passenger And Freight Vehicles, Han Hailong, Song Tailong, Ma Tianyong, Fan Zhaodong, Chen Zhexin, Chen Liang

Journal of China & Foreign Highway

To investigate the traffic congestion pattern changes in continuous bottleneck sections of highway construction zones under mixed passenger and freight traffic conditions, the spatio-temporal evolution laws of vehicle speed and lane-changing trajectory distribution in construction sections with successive lane-narrowing bottlenecks were studied. Based on measured highway data, traffic flow simulation parameters were calibrated using a genetic algorithm. By taking traffic volume and the proportion of passenger and freight vehicles as entry points, a traffic simulation experiment for continuous bottleneck construction zones under multi-factor coupling effects was constructed, and the spatio-temporal variation characteristics of speed and lane-changing trajectory distribution in the …

Go to article

Analysis Of Temperature Field Of Steel Box Girders During Steam Curing Construction Process Of Steel-Uhpc Composite Bridge Decks, Wu Shang, Zhang Yongjian Jun 2026

Analysis Of Temperature Field Of Steel Box Girders During Steam Curing Construction Process Of Steel-Uhpc Composite Bridge Decks, Wu Shang, Zhang Yongjian

Journal of China & Foreign Highway

To clarify the influence of high-temperature steam curing of steel-ultra-high performance concrete (UHPC) lightweight composite bridge deck paving on the temperature field of the steel box girder, taking a certain bridge in Hunan Province as an example, finite element numerical simulation and actual bridge testing were conducted on the temperature field of the steel box girder during the high-temperature steam curing process of the bridge deck paving. The numerical calculations were generally consistent with the test results. The analysis results indicate that under the superimposed effect of solar radiation heating and high-temperature steam curing heating, the maximum temperature of the …

Go to article

Road Design Methods For Brt Projects Based On French Standard System : A Case Study Of A Project In West Africa, Wang Meng, Wu Cheng Jun 2026

Road Design Methods For Brt Projects Based On French Standard System : A Case Study Of A Project In West Africa, Wang Meng, Wu Cheng

Journal of China & Foreign Highway

With the continuous advancement of China ’s “Belt and Road Initiative”, Chinese enterprises have become increasingly involved in international engineering markets, undertaking numerous transportation infrastructure projects, particularly in Africa and Southeast Asia. However, international engineering projects commonly face the challenge of inconsistent design standard systems across different countries, posing significant difficulties for Chinese enterprises during project implementation. To address this issue, the differences in BRT road design under Chinese and French standards were focused on in this study, and their respective design philosophies and methods were analyzed. Taking a BRT project in a West African country as an example, field …

Go to article

Material Point Method Simulation Of Soil Landslide Considering Interface Friction Effect, Zuo Zhipeng, Hu Shengliang, Li Maowen, Tong Chenxi, Li Haichao Jun 2026

Material Point Method Simulation Of Soil Landslide Considering Interface Friction Effect, Zuo Zhipeng, Hu Shengliang, Li Maowen, Tong Chenxi, Li Haichao

Journal of China & Foreign Highway

During the high-speed and long-runout sliding failure process of large landslides, severe friction and heat generation in the sliding zone induce an interface friction effect between the debris flow and the bedrock, influencing the final accumulation morphology of the landslide. In this paper, a two-dimensional landslide model of the Yangbaodi landslide in Shenzhen was established using the material point method. A contact algorithm was introduced through a multi-background grid method to conduct numerical simulations on the initiation, sliding, and accumulation processes of the landslide. The results show that after initiation, the landslide moves over a long distance in a flow-like …

Go to article

Stratified Multi-Well Pumping Tests And Back-Analysis Of Hydraulic Conductivity In Ultra-Deep Circular Foundation Pits, Luo Renkun, Wang Jie Jun 2026

Stratified Multi-Well Pumping Tests And Back-Analysis Of Hydraulic Conductivity In Ultra-Deep Circular Foundation Pits, Luo Renkun, Wang Jie

Journal of China & Foreign Highway

Dewatering prior to foundation pit excavation is a critical measure to prevent engineering hazards such as slope instability at the pit top, seepage around the pit, and bottom heave. As a key parameter in dewatering design, hydraulic conductivity directly influences the risk control in foundation pit engineering. Based on the east anchor foundation pit project of the Shiziyang Passageway, single-well pumping tests and stratified multi-well pumping tests were conducted. The water level variations in the internal dewatering wells and the external observation wells were monitored in stages. Accordingly, a finite difference numerical model for the pumping tests was established. The …

Go to article

Research On Mechanical Properties And Particle Breakage Of Construction Solid Waste Concrete Under Cyclic Loading, Li Xuejian, Song Yang, Dong Chenxi, Li Shengkai, Li Wangyuan Jun 2026

Research On Mechanical Properties And Particle Breakage Of Construction Solid Waste Concrete Under Cyclic Loading, Li Xuejian, Song Yang, Dong Chenxi, Li Shengkai, Li Wangyuan

Journal of China & Foreign Highway

To investigate the mechanical properties and particle breakage effect of construction solid waste, a series of static and dynamic direct shear tests were carried out using a dynamic interface shear tester. Different coarse particle contents (40%, 50%, and 60%), amplitudes (45 kPa, 60 kPa, and 75 kPa), and frequencies (0.5 Hz, 1 Hz, and 2 Hz) were used as variables, and the variation rules of shear stress‒shear displacement curves, shear strength parameters, and particle breakage under three normal stresses (50 kPa, 100 kPa, and 150 kPa) were analyzed. The results indicate that under the same initial normal stress, with the …

Go to article

Study On Mechanical Properties Of Ultra-High Performance Concrete With Granite Manufactured Sand After Heating And Cooling Treatment, Li Gang, Zhou Feilong, Lu Qiuju, Du Kun, Liu Kai Jun 2026

Study On Mechanical Properties Of Ultra-High Performance Concrete With Granite Manufactured Sand After Heating And Cooling Treatment, Li Gang, Zhou Feilong, Lu Qiuju, Du Kun, Liu Kai

Journal of China & Foreign Highway

Due to the frequent occurrence of building fires, the mechanical properties of concrete, as the most widely used construction material, are severely challenged under high temperatures. To explore the effect of granite manufactured sand content on the performance of ultra-high performance concrete (UHPC) after heating and cooling treatment, three types of UHPC specimens with different manufactured sand contents (0, 50%, and 100%) were prepared in this study. Then, the effects of manufactured sand content, heating temperature, and cooling regime on the P-wave velocity and uniaxial compressive strength of UHPC were obtained through experiments. The results indicate that the P-wave velocity …

Go to article

Characteristic Analysis Of Detection Profiles For Internal Moisture Content Of Asphalt Pavements Based On Ground Penetrating Radar, Yang Li, He Pingping, Liu Weizhen, Fu An Jun 2026

Characteristic Analysis Of Detection Profiles For Internal Moisture Content Of Asphalt Pavements Based On Ground Penetrating Radar, Yang Li, He Pingping, Liu Weizhen, Fu An

Journal of China & Foreign Highway

As a novel non-destructive testing method for roads, ground penetrating radar (GPR) can effectively prevent road water damage by regularly detecting the internal moisture condition of roads. However, when the moisture data of GPR are analyzed, the moisture conditions obtained by relying solely on the analysis of a single profile characteristic may be misjudged. To improve the accuracy and reliability of GPR in detecting the internal moisture content of pavements, focus was placed on the time-frequency domain analysis of GPR moisture content detection profiles in this paper. Simulation tests were conducted, and the influencing factors and results of moisture detection …

Go to article

Research On Mechanical Properties Of Concrete At High Temperatures Based On Machine Learning, Liu Junhua, Liu Bin, Cao Haifeng, Liu Zhiguang, Li Zhiyong Jun 2026

Research On Mechanical Properties Of Concrete At High Temperatures Based On Machine Learning, Liu Junhua, Liu Bin, Cao Haifeng, Liu Zhiguang, Li Zhiyong

Journal of China & Foreign Highway

Structural safety is directly affected by the mechanical properties of concrete at high temperatures. Firstly, based on the existing compression and tension test data of concrete at high temperatures, the Abaqus finite element software was adopted for numerical simulation reproduction, and the reliability of the simulation method was verified. Secondly, by simulating the uniaxial tension-compression and confining pressure tests of normal concrete with different strength grades under high temperatures of 20‒800 ℃, the influence rules of temperature on the compressive strength, splitting tensile strength, elastic modulus, and stress ‒ strain relationship of concrete were elucidated. Finally, based on three commonly …

Go to article

Research On Dic Monitoring Of Dynamic Deflection And Damage Identification Method For Small And Medium-Span Bridges, Wang Yong, Li Derui, Tang Haotian, Yan Xingfei, Cheng Bin Jun 2026

Research On Dic Monitoring Of Dynamic Deflection And Damage Identification Method For Small And Medium-Span Bridges, Wang Yong, Li Derui, Tang Haotian, Yan Xingfei, Cheng Bin

Journal of China & Foreign Highway

A large number of built small and medium-span bridges in China are facing the problem of increasingly degrading structural performance. Therefore, it is of great significance to carry out lightweight intelligent monitoring and realize damage identification and early warning, so as to ensure the safe operation of these bridges. For typical small and medium-span simply supported beam bridges, a damage analysis method based on measured dynamic deflection data was established by combining the influence line theory and mechanical constitutive equations. Furthermore, based on the high-precision monitoring algorithm and instruments of digital image correlation (DIC), the real-time dynamic deflection data of …

Go to article

Comparative Study On Pouring Timing Of Sealing Hinge Concrete For Concrete-Filled Steel Tube Arch Bridge, Wang Xiaoliang, Fu Kaige, Zhang Song, Wang Zhongqiang, Chen Zhuoyi Jun 2026

Comparative Study On Pouring Timing Of Sealing Hinge Concrete For Concrete-Filled Steel Tube Arch Bridge, Wang Xiaoliang, Fu Kaige, Zhang Song, Wang Zhongqiang, Chen Zhuoyi

Journal of China & Foreign Highway

The pouring timing of sealing hinge concrete for concrete-filled steel tube arch bridges directly affects the construction duration and the stress state of arch ribs. To clarify the structural response differences at different pouring timings, the Beiliuhe Extra-large Bridge on the Pingxi ‒ Cenxi Expressway in Guangxi Province was taken as the engineering background in this paper. A finite element model was established using Midas Civil, and the following four pouring timings of sealing hinge concrete were comparatively analyzed: immediately after the butt welding of sealing hinge steel pipes; after the closure of arch ribs and before the pouring of …

Go to article

Study On Calculation Method For Incremental Launching Based On Nonlinear Analysis, Mo Shanfeng, Huang Cailiang, Qin Hui Jun 2026

Study On Calculation Method For Incremental Launching Based On Nonlinear Analysis, Mo Shanfeng, Huang Cailiang, Qin Hui

Journal of China & Foreign Highway

In view of the shortcomings of traditional incremental launching calculation methods and the assembly construction control of incremental launching beams, an incremental launching calculation method based on nonlinear analysis was proposed in this paper. This method could truly simulate the running state where the incremental launching pier remains stationary, and the beam moves forward. The assembly alignment of all segments of the beam and the real alignment of the beam under specified working conditions could be directly output. The prefabricated alignment of the main beam (i.e., unstressed alignment) did not need to be consistent with the slide alignment. When the …

Go to article

Summary And Prospect Of Typical Diseases In Energy Transport Channels In Winter Cold Regions Over Past 20 Years, Jia Qinlong, Hou Zhongfei, Yin Yanping Jun 2026

Summary And Prospect Of Typical Diseases In Energy Transport Channels In Winter Cold Regions Over Past 20 Years, Jia Qinlong, Hou Zhongfei, Yin Yanping

Journal of China & Foreign Highway

To investigate the typical disease characteristics of energy transport channels in winter cold regions and guide the design for extending road service life, the causes of diseases such as pavement reflective cracks, continuous potholes on bridge decks, and failures of bridge drainage systems were analyzed based on the 20-year operation data of a 531 km in-service expressway in the coal energy region of northern Shaanxi. The research results indicate that when the asphalt pavement thickness reaches 22 cm, the reflective crack spacing of the expressway operated for 15 years can be controlled to over 50 m. Basically, no base layer …

Go to article

A Conceptual Model Of The External Costs Of Truck Overloading On Road Damage, Emissions, And Traffic Congestion: A Systematic Literature Review, Aleksius Sitepu, Sutanto Soehodho, Andyka Kusuma Jun 2026

A Conceptual Model Of The External Costs Of Truck Overloading On Road Damage, Emissions, And Traffic Congestion: A Systematic Literature Review, Aleksius Sitepu, Sutanto Soehodho, Andyka Kusuma

Smart City

Freight transport services cannot be separated from the infrastructure and facilities involved, each of which faces its own challenges in delivering optimal performance in the logistics sector. A common challenge in Indonesia’s road sector is the presence of overloaded freight vehicles, which has become a national issue. This phenomenon has a negative impact not only on road infrastructure but also on the environment and traffic. This study aims to develop a conceptual model of the external costs caused by truck overloading practices in terms of road infrastructure damage, increased exhaust emissions, and traffic congestion through a systematic literature review. This …

Go to article

Leveraging A Centralized Fleet Assignment Management For An Aviation Resilience, Inof Seno Acton Mr., Sutanto Soehodho, Nahry Yusuf Jun 2026

Leveraging A Centralized Fleet Assignment Management For An Aviation Resilience, Inof Seno Acton Mr., Sutanto Soehodho, Nahry Yusuf

Smart City

Since deregulation in the aviation industry, competition among airlines has intensified. This competition is shown by the increasing number of routes, service times, aircraft, and airports served. This competition causes not all flight services to meet their targets, resulting in aircraft operating less efficiently. Passenger seats are not filled, and flight delays are becoming more frequent. Obviously, this will negatively impact consumers and the airline's finances. The study focused on assigning the fleet used to serve flights to maintain existing aviation services and improve aircraft operational efficiency. This study aims to maximize profits by optimizing fleet assignments through the Centralized …

Go to article

Deep Q Network For Adaptive Pelican Crossing Signal Optimization Balancing Pedestrian Safety And Vehicular Efficiency, Amalia Yasmin Chairunnisa, Andyka Kusuma, Jachrizal R. Sumabrata Jun 2026

Deep Q Network For Adaptive Pelican Crossing Signal Optimization Balancing Pedestrian Safety And Vehicular Efficiency, Amalia Yasmin Chairunnisa, Andyka Kusuma, Jachrizal R. Sumabrata

Smart City

Static pelican crossing systems often fail to accommodate the stochastic arrival patterns prevalent in high-density transit-oriented development (TOD) zones, creating operational inefficiencies between pedestrian clearance and vehicular flow. At the Cikini Station transit hub in Jakarta, existing fixed signal cycles contribute to pedestrian delays and peak-hour congestion. This study evaluates an adaptive signal control model for mid-block pelican crossings using a Deep Q-Network (DQN) algorithm. To calibrate the simulation, empirical data were extracted from field CCTV footage using the YOLOv8 algorithm, accurately capturing 15-minute peak flow fluctuations and commuter surges. The system is formulated as a Markov Decision Process (MDP) …

Go to article

Development Of An Adaptive Pelican Crossing Model Using Fuzzy Logic In Mixed Traffic Conditions, Manazil Adam, Andyka Kusuma, R. Jachrizal Sumabrata Jun 2026

Development Of An Adaptive Pelican Crossing Model Using Fuzzy Logic In Mixed Traffic Conditions, Manazil Adam, Andyka Kusuma, R. Jachrizal Sumabrata

Smart City

Traffic management at at-grade pedestrian crossing facilities (pelican crossings) in highly populated areas, such as the Universitas Indonesia Station, faces significant inefficiency challenges. During peak hours, the fixed-time system is frequently disabled and replaced with subjective manual control by security personnel, thereby triggering irregular stop-and-go cycles and a high accumulation of vehicle delays. This study aims to develop a hybrid adaptive control model integrating Computer Vision, Genetic Algorithm (GA), and Fuzzy Logic to optimize intersection performance under mixed traffic conditions. The research methodology begins with the extraction of traffic and pedestrian characteristic data, calculated manually through recorded field observations. This …

Go to article

Transforming Dredged Sediment Into Reactive Clay: Critical Review Of Calcination, Reactivity, And Sustainable Valorization As Supplementary Cementitious Material, Seongho Han, Sanghwon Wi, Koochul Ji, Keun Hyeok Yang, Farshad Rajabipour, Kamal H. Khayat, Jinyoung Yoon Jun 2026

Transforming Dredged Sediment Into Reactive Clay: Critical Review Of Calcination, Reactivity, And Sustainable Valorization As Supplementary Cementitious Material, Seongho Han, Sanghwon Wi, Koochul Ji, Keun Hyeok Yang, Farshad Rajabipour, Kamal H. Khayat, Jinyoung Yoon

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Dredged sediment (DS) is generated worldwide in large volumes through routine port and waterway maintenance, yet its disposal presents environmental and economic challenges. Recently, calcined dredged sediment (CDS) has emerged as a supplementary cementitious material (SCM), offering a viable alternative to traditional SCMs, such as fly ash and slag cement. This review synthesizes current knowledge on the physical, chemical, and mineralogical characteristics of raw DS and pretreatment strategies aimed at dewatering, organic matter removal, and contaminant stabilization. The effects of calcination on the production of reactive amorphous aluminosilicates are also discussed. Emphasis is placed on physicochemical changes revealed by experimental …

Go to article

Low-Carbon Concrete For Sustainable Construction: A Comprehensive Review Of Performance Characteristics, Implementation Challenges, And Decarbonization Pathways, Fazel Azarhomayun, Jingjie Wei, Kamal H. Khayat Jun 2026

Low-Carbon Concrete For Sustainable Construction: A Comprehensive Review Of Performance Characteristics, Implementation Challenges, And Decarbonization Pathways, Fazel Azarhomayun, Jingjie Wei, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Reducing the carbon footprint of concrete has become a central objective in sustainable construction. Low-carbon concrete (LCC), developed primarily through clinker reduction, supplementary cementitious materials, and alternative binder strategies, offers a promising route for lowering embodied emissions while maintaining the performance requirements of structural concrete. This comprehensive review consolidates the current state of knowledge on LCC, identifies critical research and implementation gaps, and examines its material composition, mixture-design methodologies, performance characteristics, structural applications, implementation challenges, and decarbonization pathways. Single-SCM systems have been reported at clinker-replacement levels approaching 50%, although durability at these replacement levels, particularly carbonation resistance, remains system- and …

Go to article

Recent Advances In The Rheological Properties Of Ultra-High-Performance Concrete: A Critical Review, Le Teng, Kamal H. Khayat, Jiaping Liu Jun 2026

Recent Advances In The Rheological Properties Of Ultra-High-Performance Concrete: A Critical Review, Le Teng, Kamal H. Khayat, Jiaping Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Ultra-high-performance concrete (UHPC) with adapted rheology continues to attract interest considering the requirement for novel processing techniques such as self-consolidating, pumping, spraying, and three-dimensional (3D) printing. The rheology of UHPC is complex due to its high solid volume fraction, low water content, and wide range of constituent materials that affect its flow properties. This work provides guidance for tailoring the mixture proportioning of UHPC to secure proper rheological properties and performance of UHPC for various applications. In the first part of this work, key physical, physicochemical, and chemical factors that can affect the rheological properties of UHPC are discussed. Rheological …

Go to article

Research And Assessment Of Needs For Sign And Signal Maintenance, Megan White, Eric Green Jun 2026

Research And Assessment Of Needs For Sign And Signal Maintenance, Megan White, Eric Green

Kentucky Transportation Center Research Report

Kentucky Transportation Cabinet (KYTC) sign and signal crews have expressed multiple concerns related to compensation, expertise, and having the financial and personnel resources needed to help the agency comply with Manual on Uniform Traffic Control Devices (MUTCD) guidelines while continuing to perform routine job duties. Internal reorganizations and personnel changes have reduced staffing and budgets available to underwrite the activities of sign and signal crews even as workloads have remained steady or increased. To document the challenges facing sign and signal crews and associated engineering staff, Kentucky Transportation Center (KTC) researchers administered a statewide survey. Respondents gave their perspectives on …

Go to article

First Prev Next Last