Civil and Environmental Engineering Commons^™

Investigation Of Way Embankment Stability On Movement Of High Speed Trains, Mirzakhid Khamitovich Miralimov, Shakhboz Ulugbekovich Normurodov

Journal of Tashkent Institute of Railway Engineers

In this paper is considered the problem related with a stressed state of railway embankments taking into account of dynamic loadings from high-speed trains. In the offered technical method is giving wave nature transmissions of dynamic loading from the passenger trains and their interaction of soil layers with various parameters. The design procedure gives a clear physical and mathematical pattern, where all formulas are in detail shown and simple for understanding. Calculation is conducted numerically in two stages. Considering from classical principles of structural mechanics, the first calculation stage of the railway structures includes deformation of the railway sleepers taking …

Research Of Properties Of Composite Elastomeric Material Filled With Montmorillonite Of Karakalpakstan With Nanoparticles, Bakhadir Bakhramovich Kakharov, Akhmadjan Ibadullaev, Elmira Ubaydullayevna Teshabaeva, Marziya Begdullayevna Muftullayeva

Journal of Tashkent Institute of Railway Engineers

The paper presents the results of studies on the effect of montmorillonite of Karakalpakstan with nanoparticles on the specific properties of composite elastomeric materials based on a mixture of rubbers SKMS-30 ARKM-15 (70%) and SKN-26 (30%). It was found that with an increase in the filler content in rubber, the recoverability of the rubber compound after deformation is significantly reduced. Moreover, the ability of the system to accumulate the energy of elastic deformation, i.e. the swelling of the extrudate (Re), largely depends on the specific geometric surface (Ssp) of montmorillonite of Karakalpakstan. Studies of the properties of rubbers showed that …

Innovative Technologies For Formless Forming Of Multi-Hollow Floor Slabs, Anvar Ishanovich Adilkhodjayev, V.M. Tsoy, K Umarov

Journal of Tashkent Institute of Railway Engineers

the article discusses the technology of non-formwork molding and reinforcement of hollow-core floor slabs. Optimal methods of concrete mixture compaction and reduction of cement consumption without loss of the required concrete strength are analyzed. The use of floor slabs developed using no-form molding technology in conditions of increased seismic activity.

About The Influence Of The Organosilicon Hydrophobizer "Gidrofob" On The Properties Of Non-Autoclave Gas Concrete, V.M. Tsoy, S. Hodjayev

Journal of Tashkent Institute of Railway Engineers

The article examines the effect of hydrophobizing additives on the normal density and setting time of the cement paste and the strength of the cement stone. We used an organosilicon additive - "Hydrophobe" as a water-repellent additive. As a result of research, it was found that the introduction of a water repellent agent, depending on its dosage, leads to a significant increase in the setting time and insignificantly affects the strength

2-D Non-Linear Finite Element Analysis Of Folsom Dam: Seismically Induced Separation And Pore Pressure Along The Soil-Concrete Interface, Grace Amoussou

Master of Science in Civil Engineering Theses

The seismic soil-concrete interface stability of composite dams has been an area of interest to many researchers. However, the true interface behavior during a seismic event has not been well understood. During a ground shaking, bonding and de-bonding action along the interface may cause significant separation of soil and concrete surfaces, and such a separation may take place at any depth along the interface creating a stability concern for the overall dam. Moreover, the repetitive nature of bonding/debonding behavior may induce excess pore pressure along the interface, which in turn, may trigger a liquefaction failure or a hydraulic fracture in …

Numerically Modeling Steel Continuous Bridges For Early Age Concrete Deck Cracking, Abdul Aziz Nabil Salah

Graduate Theses and Dissertations

Early age bridge deck cracking is a common problem throughout the United States. Early age cracking develops shortly after the deck is poured. It reduces the serviceability and lifespan of bridges. Early age cracking can be typically attributed to either of two factors, 1) construction practices, and 2) shrinkage. The Arkansas Department of Transportation (ARDOT) has experienced early age bridge deck cracking. ARDOT currently specifies a sequence deck pour on most of their bridges; however, contractors prefer continuous deck pours because of ease and construction time. During the period of this TRC1903 research project, ARDOT has only approved a few …

Best Practices For Asphalt Emulsion Particle Size Analyses Using A Coulter Counter, Logan P. Kiihnl

Graduate Theses and Dissertations

As asphalt pavements develop distresses, pavement preservation, maintenance, and rehabilitation treatments are used to mitigate distresses and extend the life of the pavement. Many of these treatments utilize asphalt emulsion. Previous research has linked particle size to material properties including viscosity and storage stability. General statements have also been made about particle size influencing emulsion performance while other researchers have identified a trend between particle size and prime coat penetration. Even though literature discusses the importance of particle size, there is little guidance on the best practices of asphalt emulsion particle size analyses, specifically with a Coulter counter.

Data collected …

Development Of Multi-Axial Fatigue Retrofits For Lock Gate Components, Logan Verkamp

Graduate Theses and Dissertations

Lock gates are essential infrastructure components to the United State (US) supply chain. They create large cost savings and environmental benefits when compared with traditional methods of transport (freight and rail). Because of the large quantity of goods and dependence on these shipping chains, the US economy can be drastically affected by an unexpected gate closure. Unfortunately, many lock gates within the US have reached or exceeded their designed life. Due to the intensity of cyclic loads and the environment, fatigue cracks have become a prominent issue. Developed cracks near the pintle region (a joint which the gate rotates and …

Potential Of Existing And Proposed Bicycle Facilities To Link Multiple Origin And Destination Needs For Non-Motorized Travel In San Luis Obispo, Sheridan Nansen

City and Regional Planning

The purpose of this study is to investigate the potential of linking multiple origins and destinations for efficient non-motorized travel in San Luis Obispo, California. The city currently has seventy-five miles of bicycle infrastructure with the intention to add thirty-five more miles to create a more functional bicycle network and foster an increase in bicycle trips taken.

Many cities in the United States are following their European counterparts in the push towards more sustainable forms of transportation by promoting bicycling, walking, and the use of public transit. Recently, we have seen an increase in both local and national legislative efforts …

Bike And Pedestrian Safety Planning: Excelsior/Outer Mission District, Alexandra Lee-Gardner

City and Regional Planning

San Francisco’s Outer Mission and Excelsior districts host a vibrant community of small business owners and residents from a variety of backgrounds and cultures. The neighborhood is known for its diversity and sense of community. However, lack of adequate infrastructure and high-speed roadways has created great safety concerns within the community. In the last five years, the Excelsior/Outer Mission area had 828 collisions, nine of which were fatal (Transbase, n.d.). San Francisco Municipal Transportation Agency (SFMTA) has identified nearly 14 miles of streets in the project area that are on the City’s high injury network, meaning collisions there are highly …

Investigation Of Driver License Issuance Alternatives, Steven Andrew Martin, Abraham Najarzadeh, Jennifer R. Walton

Kentucky Transportation Center Research Report

This study develops an alternative model for issuing driver licenses and personal identifications in Kentucky. Under the current model, most licenses are distributed by circuit court clerks at 142 offices across the state while the Kentucky Transportation Cabinet (KYTC) provides central and regional support for specific license types. Given the cumbersome administrative structure and impending REAL ID requirements, both circuit clerks and KYTC administrators would like to explore an alternative distribution model. Researchers at the Kentucky Transportation Center (KTC) projected the costs of transitioning from the current issuance model to a centralized DMV model where licenses are distributed at 18 …

Effect Of Socioeconomic Factors On Crash Occurrence, Nikiforos Stamatiadis, Shraddha Sagar, Samantha Wright, Aaron Berry Cambron

Kentucky Transportation Center Research Report

Road traffic crashes are a leading cause of death in the United States. In Kentucky, per capita crash rates and crash-related fatalities have outpaced the national average for over a decade. Wanting to explain why the U.S. Southeast sees higher crash rates than other regions, researchers have argued the region’s unique socioeconomic conditions provide a compelling explanation. Taking this observation as a starting point, this study examined the relationship between highway safety and socioeconomic characteristics using an extensive crash dataset from Kentucky. This research sought to identify at-risk drivers based on the socioeconomic and demographic attributes of the zip codes …

Understanding Workability In Belitic Calcium Sulfoaluminate Concrete Mixtures, Caleb W. Chesnut

Civil Engineering Undergraduate Honors Theses

Belitic Calcium Sulfoaluminate cement (BCSA) is an emerging technology in the concrete industry. BCSA has similar hardened properties to portland cement (PC) but can set in under 20 minutes and reach 4,000 psi in less than 2 hours. Portland cement accounts for 8% of the world’s CO2 emissions, BCSA cements require less energy to produce. Studies have shown that 40% less CO2 is emitted during the production of BCSA cement than portland cement. This environmental benefit also makes it a very promising PC alternative. Before a new material can be used, designers need to understand the material’s properties. The goal …

Countermeasures For Pedestrian-Involved Accidents On Interstate-Highways, Anna C. Hunter

Civil Engineering Undergraduate Honors Theses

Pedestrian access to the Interstate is prohibited, but many pedestrian-involved accidents still occur on the Interstate in the United States. This project is a case study of West Memphis, Arkansas, which has the second highest occurrence of pedestrian-involved accidents on the Interstate in Arkansas. The study site location includes a segment of Interstate I-40 which is at- grade. The surrounding area contains several different land-uses, which is believed to be the primary generator of these accidents. The goal of this project is to determine the primary causes of these accidents and determine potential countermeasures to reduce the crash rate for …

Applying Performance Engineered Mixture Design To Permeable Concrete, Rachel Pohl

Civil Engineering Undergraduate Honors Theses

The scope of research and application related to permeable pavements has recently broadened. The desire to significantly reduce the environmental impact of large paved areas makes the permeable pavement concept more desirable (American Concrete Institute, 2018). Although research and interest are increasing, the actual application of permeable pavement is still very limited and has not reached the airfield arena. In airfields, permeable pavement could possibly be used for aircraft aprons - which currently require substantial measures to control stormwater runoff. Permeable pavements are typically used in low-traffic-volume / lightly loaded applications; questions remain regarding a permeable pavement’s ability to hold …

Construction-Ready Digital Terrain Models, Rachel Catchings, Steven Waddle, Hala Nassereddine, Gabriel B. Dadi, Makram Bou Hatoum, Walter Johnson

Kentucky Transportation Center Research Report

Since 2009, Kentucky has made its 3D design data available as a supplemental reference to bidders through the project delivery process. This research discusses methods for ensuring electronic engineering data (EED) — and specifically the proposed digital terrain model (DTM) — support modern construction management methods at the Kentucky Transportation Cabinet (KYTC). Researchers performed a literature review, surveyed KYTC construction and design staff, engaged with Cabinet staff and industry members to understand the current state of practice, and evaluated quality- related attributes of the EED through case studies. The report presents a set of targeted recommendations for improving KYTC processes …

Quantitative Resistance Assessment Of Sfrp-Strengthened Rc Bridge Columns Subjected To Blast Loads, Ahmad Alsendi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

The blast resistance of a typical reinforced concrete bridge pier column design was modeled with a nonlinear finite element approach that considers material damage, fracture, and separation. While varying concrete strength, amount of longitudinal reinforcing steel, and gravity load, the effect of applying an externally bonded steel fiber reinforced polymer (SFRP) wrapping was assessed. The presented approach uniquely quantifies column blast resistance in terms of charge weight. It was found that blast capacity was roughly linearly related to concrete strength and steel reinforcement ratio, the former of which is most influential. It was further found that a single layer of …

Load Truncation Approach For Development Of Live Load Factors For Bridge Rating, Sasan Siavashi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

Various local governments have developed state-specific vehicular live load factors for bridge rating. However, a significant computational demand is often associated with such an effort. This is due to the large size of the weigh-in-motion (WIM) databases frequently used in the procedure. In this study, a method is proposed that can significantly reduce the computational cost of the analysis, while still maintaining reasonable accuracy. The proposed approach develops approximate live load random variable statistics by truncating the WIM database based on gross vehicle weight, then a complete reliability analysis is conducted to develop new live load factors that meet AASHTO-specified …

The Impact Of Pev User Charging Behavior In Building Public Charging Infrastructure, Ahmad Almaghrebi

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Plug-in electric vehicles (PEVs) play a significant role in the development of green cities since they generate less pollution than conventional vehicles. To promote PEV adoption and mitigate range anxiety, charging infrastructure should be deployed at strategic locations that are readily accessible to the public. Nebraska is working on the expansion of charging infrastructure around the state; however, stakeholders face several difficulties in trying to minimize irregular charging behaviors. Most electric vehicle users plug in and leave their vehicles for an extended time at public parking lots designated for PEVs. Some users even leave their vehicles for longer than 24 …

Pavement Management System Research Output: A Scientometric Assessment, Shabir Hussain Khahro, Zubair Ahmed Memon, Nur Izzi Md. Yusoff Dr, Lillian Gungat, Muhamad Razuhanafi Mat Yazid

Library Philosophy and Practice (e-journal)

Developing countries are struggling with cost management of pavement construction and rehabilitation. This case is similar to developedcountries butdeveloping countries are suffering issues of inadequate funds. Therefore, most of the countries started usage of Pavement Management Systems (PMS) to manage the decision-making process and alternate/priority assessments for pavement construction and rehabilitation. Hence, the PMS remains the topic of research interest for various researchers. This paper evaluates the scale and effectiveness of articles published by Web of Science (WoS) Group on PMS since 1990. The data has been collected from the WoS database from 1990 till 2020. The datawas processedand analyzed …

Real-Time Pm10 Emission Rates From Paved Roads By Measurement Of Concentrations In The Vehicle's Wake Using On-Board Sensors Part 1. Scamper Method Characterization, Dennis R. Fitz, Kurt Bumiller, Charles Bufalino, David E. James

Civil and Environmental Engineering and Construction Faculty Research

Based on emission factors derived from the AP-42 algorithm, particulate matter from paved roads has been estimated to be a major source of PM10 of geologic origin. This is an empirical formula based on upwind-downwind measurement of PM10 concentrations and is dependent solely on the silt loading of the pavement and the weight of vehicles. A number of upwind-downwind studies conducted in urban areas to validate this algorithm have been generally inconclusive because the PM10 concentration difference between upwind and downwind often is within the measurement uncertainty. In the approach presented here PM10 concentrations were measured directly behind a moving …

Correction To: Recommendations Of Rilem Tc 260-Rsc For Using Superabsorbent Polymers (Sap) For Improving Freeze–Thaw Resistance Of Cement-Based Materials (Materials And Structures, (2019), 52, 4, (75), 10.1617/S11527-019-1375-4), Viktor Mechtcherine, Christof Schröfl, Michaela Reichardt, Agnieszka J. Klemm, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Agnieszka J. Klemm is affiliated to Glasgow Caledonian University, Glasgow, UK.

Hybrid Vehicle-Drone Routing Problem For Pick-Up And Delivery Services Mathematical Formulation And Solution Methodology, Aline Karak

Civil and Environmental Engineering Theses and Dissertations

The fast growth of online retail and associated increasing demand for same-day delivery have pushed online retail and delivery companies to develop new paradigms to provide faster, cheaper, and greener delivery services. Considering drones’ recent technological advancements over the past decade, they are increasingly ready to replace conventional truck-based delivery services, especially for the last mile of the trip. Drones have significantly improved in terms of their travel ranges, load-carrying capacity, positioning accuracy, durability, and battery charging rates. Substituting delivery vehicles with drones could result in $50M of annual cost savings for major U.S. service providers.

The first objective of …

Vehicle Performance Analysis Of An Autonomous Electric Shuttle Modified For Wheelchair Accessibility, Johan Fanas Rojas

Masters Theses

Autonomous vehicles (AV) have the potential to vastly improve independent, safe, and cost-effective mobility options for individuals with disabilities. However, accessibility considerations are often overlooked in the early stages of design, resulting in AVs that are inaccessible to people with disabilities. The needs of wheeled mobility device users can cause significant vehicle design changes due to requirements for stepless ingress/egress and increased space for onboard circulation and securement. Vehicles serving people with disabilities typically require costly aftermarket modifications for accessibility, which may have unforeseen impacts on vehicle performance and safety, particularly in the case of automated vehicles. In this research, …

Social Justice Mitigation In Transportation Projects: Why And How Lexington Fayette Urban County Government Can Support The Lexington Community Land Trust’S Path To Self-Sustainability, Pamela Clay-Young, Steven Douglas Kreis

Kentucky Transportation Center Research Report

The city of Lexington has reached a critical shortage of affordable housing available to families earning 80% - 50% of area median income (AMI). This study focuses on how to grow the Lexington CLT into self-sustainability while also narrowing the affordable housing gaps in Fayette County. Current research offers support for the city’s affordable housing program to adopt the community land trust model (CLT). The research recommends using tools such as the Lexington CLT, the Lexington-Fayette Urban County Landbank Authority (LFUCLA), and Lexington’s Affordable Housing Trust Fund, along with new development incentives, to develop a housing strategy that is cost …

Application Of Internal Curing To Improve Concrete Bridge Deck Performance, Arman Abdigaliyev, Yong-Rak Kim, Jiong Hu

Nebraska Department of Transportation: Research Reports

Due to the relatively high cement content and low water-to-cement ratio (w/c) used, bridge deck concrete is prone to premature cracking. Internal curing has been found to greatly reduce the chance of premature cracking as well as concrete deterioration. This research project was intended to develop internally cured bridge deck concrete based on a local mix design in Nebraska. Four different lightweight fine aggregate (LWFA) as internal curing agents were evaluated, and their effects on fresh, mechanical, durability, and shrinkage properties of concrete were studied. To identify the most effective LWFA dosage for shrinkage reduction, different replacement rates of sand …

Correlation Analysis Of Mdss And Newins, Mark R. Anderson, Curtis L. Walker, Nancy Barnhardt, Nathan Rick, Cameron Wunderlin

Nebraska Department of Transportation: Research Reports

Improving winter maintenance is a goal of most transportation agencies including the Nebraska Department of Transportation (NDOT). One approach is to develop a decision support system to aid in the winter maintenance recommendations. Iteris has developed a maintenance decision support system (MDSS) and has teamed up with NDOT to provide winter weather guidance for operations. This report investigates how well the MDSS functions for several routes across Nebraska for different storm systems. The analysis was performed from saved events within MDSS and compared to meteorological observations during different storm events, mainly Colorado or Alberta Clipper type storms that moved through …

Development And Implementation Of A Moving Nondestructive Evaluation Platform For Bridge Deck Inspection, Sepehr Pashoutani, Jinying Zhu, Chungwook Sim, Brian Mazzeo, Spencer Guthrie

Nebraska Department of Transportation: Research Reports

Degradation in concrete bridge decks is typically manifested as rebar corrosion, concrete delamination, and surface cracks. Nondestructive evaluation and testing (NDE/NDT) technologies have been increasingly used in concrete bridge deck evaluation to identify, localize, and quantify deterioration in bridge decks. Each NDE method has its advantages and limitations on the type of defect that can be detected. Therefore, combining multiple NDE technologies is needed in order to give comprehensive and reliable information about the bridge deck condition. For effective application of multiple NDE tests, we need to use automated positioning for each NDE to facilitate post-processing and data fusion of …

A Rule Based Control Algorithm For On-Ramp Merge With Connected And Automated Vehicles, Ehsan Beheshtitabar

Civil & Environmental Engineering Theses & Dissertations

One of the designs for future highways with the flow of Connected Automated Vehicles (CAVs) cars will be a dedicated lane for the CAVs to form platoons and travel with higher speeds and lower headways. The connectivity will enable the formation of platoons of CAVs traveling beside non-platoon lanes. The advent of connectivity between vehicles and the infrastructure will enable advanced control strategies ̶ improving the performance of the traffic ̶ to be incorporated in the traffic system. The merge area in a multilane highway with CAVs is one of the sections which can be enhanced by the operation of …

Truck Trailer Classification Using Side-Fire Light Detection And Ranging (Lidar) Data, Olcay Sahin

Civil & Environmental Engineering Theses & Dissertations

Classification of vehicles into distinct groups is critical for many applications, including freight and commodity flow modeling, pavement management and design, tolling, air quality monitoring, and intelligent transportation systems. The Federal Highway Administration (FHWA) developed a standardized 13-category vehicle classification ruleset, which meets the needs of many traffic data user applications. However, some applications need high-resolution data for modeling and analysis. For example, the type of commodity being carried must be known in the freight modeling framework. Unfortunately, this information is not available at the state or metropolitan level, or it is expensive to obtain from current resources.

Nevertheless, using …