Civil and Environmental Engineering Commons^™

A Comparative Analysis Of Coastdown Testing Methods From An Electric Drive Unit Engagement Perspective Using A Student-Designed Parallel Hybrid Electric Vehicle, Dawson Everett Dunnuck

Graduate Theses, Dissertations, and Problem Reports (ETD)

Coastdown testing and road load determination are pivotal parts of the automotive design process. Vehicle manufacturers and independent companies perform and analyze road loads determined through a coastdown or similar method to determine a vehicle’s road load for modeling and EPA certification. For a traditional coastdown, the vehicle’s drivetrain must be disconnected through a clutch between the engine and the transmission while traveling at a high rate of speed to place the vehicle in neutral. This changes for hybrid and electric vehicles. Some hybrid, and most electric, vehicles delivered to customers do not have this clutch action to grant the …

Implementation Of Ground Penetrating Radar (Gpr) And Complementary Non-Destructive Testing On Concrete Structures, Macy Spears

College of Graduate Studies: Theses & Dissertations

This study analyzes the application and practicality of different non-destructive testing (NDT) methods for the inspection of reinforced concrete. There are two studies discussed in this paper. The first one is a laboratory investigation, utilizing ground penetrating radar (GPR) on concrete slabs that consisted of simulated defects to mimic those found in real concrete structures. This served as a preliminary experiment to verify the GPR data with the design of the slabs. The following study describes a field investigation on an old bridge deck, which involved multiple testing methods. The techniques used were GPR, impact echo (IE), ultrasonic pulse echo …

Time-Specific Safety Performance Functions For Different Advanced Traffic Management Strategies, Jingwan Fu

Electronic Theses and Dissertations, 2020-2023

Time-specific Safety Performance Functions (SPFs) were proposed to achieve accurate and dynamic crash frequency predictions and bridge the gap between annual crash frequency prediction and real-time crash likelihood prediction. This research proposed time-specific SPFs considering the temporal variation in crashes and traffic characteristics. Firstly, the developed time-specific SPFs that include different ATM strategies (i.e., HOV, merge, diverge and reversible lanes segments) were investigated in this study. The results indicate that the traffic turbulence during specific hours would relate to crash occurrence. Further, the variables that represent the speed and occupancy differences between the HOV lanes/reversible lanes and general-purpose lanes were …

Study Of Eco-Driving And Charging Planning In Connected And Automated Vehicles Environment, Pradeep Bhat

Dissertations, Master's Theses and Master's Reports

In this dissertation, the development of eco-driving and charging planning algorithms in the connected and automated vehicle environment (CAV) are presented. CAV technologies provide opportunities for potential energy savings and efficiency improvement of transportation networks, which are explored through multiple research tasks in this study.

The objective of the first study presented in Chapter 2 is to reduce vehicle dynamic losses and required tractive force while completing trip distance within a given travel time. Sequential Quadratic Programming method is employed for this nonlinearly constrained optimization problem. The validation result illustrates the benefits of optimal velocity trajectories. The objective of the …

The Impact Distracted Driving Has On Fatal Crashes, Adam Pohrte

Williams Honors College, Honors Research Projects

Distracted driving has been a major problem in the United States and around the globe for quite some time. It is one of the leading causes of fatal car crashes, and its impact on road safety has been the subject of much research and debate. The purpose of this paper is to focus on the driver who was distracted that ended up causing the crash. To obtain precise data and results, all the information about these crashes is from the Fatality Analysis Reporting System (FARS). FARS is a nationwide census maintained by the National Highway Traffic Safety Administration (NHTSA) that …

Powering Electric Vehicles: Are We Ready?, Christian Yoder

Williams Honors College, Honors Research Projects

This project will investigate typical power grids and the impacts that electric vehicles have on them. Electric vehicles are rapidly growing in popularity and much of the world is promising to make the switch from combustion engines to EVs. Electric vehicles demand a large amount of electricity. With fast charging becoming available, it is worth asking if the current electrical infrastructure can handle the increase in demand. After talking to a source at FirstEnergy, it seems large electric companies are well aware of areas in need of adjustment and are moving accordingly.

Does The Ite Trip Generation Manual Overestimate The Trip Generation Of Stores In Northeast Ohio?, Shawn Monahan

Williams Honors College, Honors Research Projects

This project will examine the use of the Trip Generation Manual to estimate the number of 'trips' per average weekday. A trip is defined as a vehicular movement from one location to another. The Trip Generation Manual will examine the estimated number of trips generated for local discount superstores in the Northeast Region of Ohio. Surveys were completed for local data, supplemented with a vehicle occupancy rate sample. This will provide a baseline that the Trip Generation Manual will be compared to.

An Analysis Of The Influence Of Speed On Fatal Accidents In Ohio, Megan Johnson

Williams Honors College, Honors Research Projects

Through data collected by NHTSA and FARS, Ohio crash data resulting in fatalities were analyzed through four different breakdowns to determine variables correlating to the fatalities. The breakdowns include dividing data from overall Ohio data, reports involving speeding, then from there to single-vehicle crashes. That data was divided down to only include male drivers and then finally only motorcycles. This data was analyzed as it was broken down to find trends with each category. Through these analyses, the trends were developed to suggest recommendations to implement through education and laws to help reduce the number of crashes resulting in fatalities.

A Study On Crash Reduction Of A Signalized Intersection Converted To A Multi-Lane Roundabout, Ian Fuller

Williams Honors College, Honors Research Projects

An analysis of traffic patterns and design issues with East Main Street in Kent, Ohio. Including potential improvements.

Urban Freight Transportation: The Interaction Of Home Deliveries In Cities, Carla A. Tejada

Dissertations and Theses

The movement of freight in urban areas is a key factor in the sustainable development of cities. If managed correctly, it can potentiate economic growth and support urban lifestyles. Nevertheless, the movement of goods in cities is usually in conflict with other urban flows and is generally perceived as having more negative externalities, above all for environmental and social sustainability. While the first focuses on measuring the impact on the environment, the latter focuses on measuring the impacts of business decisions on people. The main goal of this dissertation is to study the relationship that urban goods movements, mainly residential …

Are Ride-Hailing Services Safer Than Taxis? A Multivariate Spatial Approach With Accomodation Of Exposure Uncertainty, Guocong Zhai, Kun Xie, Hong Yang, Di Yang

Civil & Environmental Engineering Faculty Publications

Despite many research efforts on ride-hailing services and taxis, limited studies have compared the safety performance of the two modes. A major challenge is the need for reliable mode-specific exposure data to model their safety outcomes. Moreover, crash frequencies of the two modes by injury severities tend to be spatially and inherently correlated. To fully address these issues, this study proposes a novel multivariate conditional autoregressive model considering measurement errors in mode-specific exposures (MVCARME). More specially, a classical measurement error structure is used to accommodate the uncertainty of mode-specific exposures estimated, and a multivariate spatial specification is adopted to capture …

Sustainable Transportation: Behavioral Analysis Of Working-From-Home And Electric Vehicles Adoption, Zeinab Bayati

UNF Graduate Theses and Dissertations

Sustainable transportation plays a crucial role in mitigating environmental impacts, and this study examines two key aspects, namely working from home (WFH) and the adoption of electric vehicles (EVs), in the context of promoting sustainable practices.

The first part of this thesis focuses on how people's perceptions towards working from home have changed as a result of their experiences during COVID-19. To analyze these changes, a random parameter logit (RPL) model is developed based on a nationwide public dataset collected during the pandemic in the United States. Dependent variable of the model is constructed through comparing data from the first …

Quantifying Geogrid Reinforcement Mechanism In Roadway Performance Using Cyclic Plate Load (Cpl) Test, G.S. Ellithy, A. Crippa

Publications

For decades, geogrids have been used successfully to improve performance in both paved and unpaved roadway construction. Even though the current state of practice differentiates between the design methodology incorporating geogrids in paved and unpaved roadways, the true improvement contribution of geogrids is to the base layer, or to the layer that is placed directly on top of it. It has been established that the three reinforcement mechanisms by which geogrids enhance roadway performance are: lateral restraint, bearing capacity increase and membrane tension support. In order to quantify these mechanisms and their contribution to the roadway performance improvement, two Cyclic …

Multiscale Evaluation Of The Effect Of Deicing Agents And Environmental Conditions On The Performance Of Asphalt Pavements In Cold Regions, Maryam Mihandoust

Electronic Theses and Dissertations

No abstract provided.

An Analysis Of The Effect Of Temperature On Asphalt Paving In South Dakota, S M Rahat Rashedi

Electronic Theses and Dissertations

Temperature is an important parameter to consider for asphalt paving since this work is generally susceptible to weather due to outdoor construction. The South Dakota Department of Transportation (SDDOT) developed working day weather charts in 1998 to address the expected adverse weather days. This thesis investigated the effect of temperature on adverse weather days for asphalt paving and compared them to the value reported in the 1998 SDDOT study. Moreover, the thesis also examined how closely the maximum temperature data from project sites' weekly progress reports (WPR) matched the data from the closest weather stations. When the maximum temperature (TMAX) …

Extracting Road Surface Marking Features From Aerial Images Using Deep Learning, Michael Kimollo

UNF Graduate Theses and Dissertations

The traffic and roadway safety agencies spend significant efforts each year collecting roadway data, including lane configurations and other road surface marking data, such as areas with school zone markings, sidewalks, left turns, right turns, bicycle lanes, etc., for safety analysis and planning purposes. The current manual data collection methods pose significant operational and quality control challenges as they are costly and prone to errors. In addition to that the manual data collection is labor intensive and takes too much time involving high equipment costs, questionable data accuracy guarantees, and concerns about the safety of the crew.

This study aims …

Exploring Of User Experience And Evaluating Mobility Benefits Of Micromobility Systems And Golf Carts: Case Study Of Florida, Kabhabhela C. Bukuru

UNF Graduate Theses and Dissertations

Micromobility devices and golf carts (GCs)/Low speed vehicles(LSVs) are urban transportation solutions that provide short-distance travel options, including first- and last-mile trips. They mostly operate at speeds of 15 mi/h to 35 mi/h. The micromobility devices include e-scooters and e-bikes. The micromobility devices and golfcarts are increasing rapidly in the transportation system, and thus, it is necessary to explore their various factors. The objective of this study is to explore the user experience and evaluate the mobility benefits of the micromobility systems in Florida.

A survey was conducted in various cities with a substantial user base of micromobility devices. Various …

Visual Sensing For Comprehensive Granular Traffic Data Collection In Support Of Intelligent Transportation Applications, Linjun Lu

Graduate Theses, Dissertations, and Problem Reports (ETD)

Comprehensive granular traffic data collection has been identified as one of the most essential tasks in the development of intelligent transportation systems (ITS). With the recent advances in electro-optical sensors and computational capacities, machine vision is regarded as cost-efficient for traffic data collection. However, the existing vision-based methods are only applicable for collecting limited types of traffic data, and a unified method allowing for comprehensive traffic data collection is still missing in the existing literature. Moreover, there are still challenges that exist for the use of the existing vision-based methods in real settings, including low accuracy and compromised applicability due …

Evaluation Of Nanoclay Additives For Improving Resistance To Moisture Damage In Hot Mix Asphalt (Hma), Amro El Badawy, Ashraf Rahim

Mineta Transportation Institute

Transportation has an enormous impact on the U.S. economy and on the lives of all Americans. Many modes of transportation rely on pavement, but pavement conditions deteriorate over time because of the combined effects of traffic and climate. Exposure to moisture often causes premature failure of asphalt pavements as it reduces the stiffness of the asphalt and enables stripping of the asphalt from the aggregate. This research evaluates the effectiveness of clay nanomaterials (i.e., nanoclays) in improving the resistance of hot mix asphalt (HMA) to moisture damage and compares the enhancement results to anti-stripping additives commonly used in pavement construction. …

Assessment Of Regional Bike And Pedestrian Equity In Transportation Plans, Drew Reiter

Graduate Theses, Dissertations, and Problem Reports (ETD)

While community involvement is legally required as a crucial part of the planning process, historically the traditional state-centric approaches to transportation planning have led to the underrepresentation of transportation-disadvantaged individuals in the process and, thus, to automobile-oriented regions. Planning practices for small urban and rural areas especially, which often lack funding and other resources, have generally overlooked accessible pedestrian, bicycling, and multimodal infrastructure and facilities, resulting in underdeveloped and poorly connected networks. I conducted a social equity evaluation of the regional planning, investment prioritization, and programming processes for pedestrian and bicycling infrastructure using the case study of Monongalia County, West …

Understanding Emerging Travel Behavior In New York City, Md Amdad Hossen

Graduate Theses, Dissertations, and Problem Reports (ETD)

Many large cities face significant challenges in providing safe, economical, equitable, reliable, and efficient mobility services. Moreover, mobility service options have been changing unprecedentedly due to the advent of emerging mobility services. Understanding the impacts of emerging mobility services (e.g., for-hire vehicles, bike sharing) on other travel modes (e.g., transit, non-motorized modes, personal car) and evolving travel behavior is critical to promote sustainable modes for urban residents and reduce auto-dependency. New York City (NYC) has been conducting annual mobility survey since 2017 to understand the emerging travel behavior and mode choice characteristics. This dataset presents a unique opportunity for conducting …

Spatial Analysis Of Bike-Sharing Station Usage And Placement: Redefining Bike-Share Planning For Equity, Sydney E. French

Graduate Theses, Dissertations, and Problem Reports (ETD)

Historically, bike share system (BSS) station locations have been guided by potential economic and environmental benefits associated with increased bike share usage per station. For example, a typical location identification approach may attempt to maximize demand per station based on population size or activity and area characteristics. Such identification methods often result in an unequal representation of specific population groups among the systems’ users, thus hindering the potential sustainability-related benefits. To address these disparities, some bike share organizations have started developing and implementing equity-oriented programs focusing on expanding their reach to underserved communities. Nevertheless, the effectiveness of such programs has …

Estimating Vehicle Infrastructure: Downtown Albuquerque, New Mexico, Zachery Phillip Baiamonte

Architecture and Planning ETDs

Cities have little knowledge about their parking infrastructure despite clear evidence that abundant parking has environmental, economic, and transportation consequences. The objective of this thesis is to illustrate the need to accurately estimate the area dedicated to vehicle infrastructure (parking lots and streets) within urban areas. I focused on a method that estimated the vehicle infrastructure area within the Downtown Core of Albuquerque, New Mexico, by cross-referencing geospatial cadastral data with minimum parking requirements. Three parking space types were identified: 1) parking in structures; 2) surface parking (parking lots and residential driveways); and 3) on-street parking. To illustrate the need …

Inequity Of Access Across America: A Spatial, Temporal, And Modal Disparity Analysis, Sanju Maharjan

Theses and Dissertations

The overarching goal of this dissertation is to examine the spatial, temporal, and modal disparity of access across America. This is achieved by posing three research objectives. The first objective determines the spatial and temporal disparity of transit and automobile access gap, its impact on transit use, and its socioeconomic and built environment correlates. The second objective examines the spatial and temporal disparity of slightly and extremely risky bike infrastructure and measures the social inequity of access to bike infrastructure. The third objective indicates spatial transit access mismatch between high- and low-wage employment across metropolitans. Three findings are discerned. First, …

Improving Building Cfd Peak Pressure Computation Using Les With A Focus On Inflow Turbulence Methods And Grid Spacing Size., Zahra Mansouri

Graduate Theses and Dissertations

Structural failures by extreme winds often leads to economic losses and even deaths. Proper design of buildings requires accurate estimation of wind loads to prevent structural damage. Using routine guidelines generally leads to the underestimation of buildings’ peak pressures, in which most failures occur. To estimate wind loads more accurately three different methods (i.e., field measurement, wind tunnel (WT), and computational fluid dynamics (CFD)) are in use. A well-validated CFD provides more flow field details at lower costs compared to field measurements and WT. As strong winds are extremely turbulent, the effects of turbulence in wind should be incorporated into …

Comparative Analysis Of 3d Printed Bridge Construction In Louisiana, Amirhosein Jafari, Ali Kazemian, Sarah Ataei

Data

A construction 3D printing system could result in automated infrastructure development at reduced cost and time, significantly boosting overall productivity. Although there has been a growing interest in using construction 3D printing for projects such as house construction, implementing this innovative technology for infrastructure development, particularly bridge construction, has not been investigated as extensively. This study aims to compare the environmental impact of precast and 3D concrete printing (3DCP) techniques with a pedestrian bridge case study, located in Louisiana, where the bridge elements were 3D printed off-site and then transported and assembled on the bridge site. A detailed cradle-to-site life …

Comparative Analysis Of 3d Printed Bridge Construction In Louisiana, Amirhosein Jafari, Ali Kazemian, Sarah Ataei

Publications

A construction 3D printing system could result in automated infrastructure development at reduced cost and time, significantly boosting overall productivity. Although there has been a growing interest in using construction 3D printing for projects such as house construction, implementing this innovative technology for infrastructure development, particularly bridge construction, has not been investigated as extensively. This study aims to compare the environmental impact of precast and 3D concrete printing (3DCP) techniques with a pedestrian bridge case study, located in Louisiana, where the bridge elements were 3D printed off-site and then transported and assembled on the bridge site. A detailed cradle-to-site life …

Development Of Ultra-High Performance Engineered Geopolymer Composites (Uhp-Egcs), Hassan Noorvand, Miladin Radovic, Marwa Hassan, Svetlana Sukhishvili, Gabriel Arce, Ruwa Abufarsakh, Adriana A. Alvarado, Oscar Huang, Sang Zhen

Data

This study investigated the possibility of developing novel UHP-EGC materials for the repair and new construction of transportation infrastructure in Region 6 by utilizing locally available resources. To this end, the geopolymers (GPs) in this study were synthesized by activating metakaolin (MK) with potassium silicate and sodium silicate solutions. The solutions were manufactured in the laboratory by dissolving silica fume and potassium hydroxide (KOH) or sodium hydroxide (NaOH) in deionized water. MK-based GP binders, mortars, and fiber-reinforced composites were manufactured and evaluated to determine their density, compressive strength, tensile properties, and slant shear bond strength to Portland cement concrete (PCC). …

Spf-R Online User Guide, Eric Green, Paul Ross, Christopher Blackden, William Staats, Reginald Souleyrette

Kentucky Transportation Center Research Report

SPF-R Online greatly improves and simplifies the SPF development process. Building on the original SPF-R script, the online tool eliminates many of the technical barriers associated with the original process, allowing for a much larger audience to take advantage of SPF-R’s capabilities. Like the original SPF-R script, SPF-R Online lets users quickly explore the effect of roadway network heterogeneity on SPF development, compare CURE plots , and compare goodness-of-fit measures to decide which SPF is most appropriate for a given dataset.

Field Monitoring Of Joint-Less Curved Integral Abutment Bridge In Nebraska, Ramin Ziaei, Yusuf Alhowaidi, Chungwook Sim, Jongwan Eun, Seunghee Kim, Chung Rak Song

Nebraska Department of Transportation: Research Reports

The research objective of this project is to study the behavior of the curved full integral abutment bridge designed in Nebraska through field monitoring and numerical simulation to 1) understand and model the complex short-term and long-term behavior of curved integral abutment bridges, 2) evaluate if the details provided in Nebraska (pile embedment over 4 ft into the abutment) can be expanded for wider design and construction practices (longer spans and larger curvature for curved bridges), and 3) better maintain existing full curved integral bridges in Nebraska based on the findings of this study (revise and optimize design, if needed). …