Civil and Environmental Engineering Commons^™

Comprehensive Inspection On The Experimental Ferritic Stainless Steel By Means Of Transmission Electron Microscopy And Neutron Diffraction Techniques, Parikin Parikin, Mohammad Dani, Riza Iskandar, Aziz Khan Jahja, Andon Insani, Joachim Mayer

Makara Journal of Technology

The field of physical metallurgy is one of the primary beacons that guide alloy developments for multipurpose materials such as the in-core structure materials for pressure vessel components and heat exchangers. The surface microstructure of new ferritic steel with significant local constituent materials was characterized by high resolution powder neutron diffractometer (HRPD) and transmission electron microscope (TEM), combined with the energy dispersive X-ray spectroscopy (EDX). The alloy contains73% Fe, 24% Cr, 2% Si, 0.8% Mn, and 0.1% Ni, in %wt. The charge materials were melted by the casting techniques. The neutron diffractograms obtained shows five dominant diffraction peaks at (110), …

Study On Antibacterial Of Chitosan/Hydroxyapatite Doped Magnesium Composite As A Material For Bone Graft Applications, Andromeda Dwi Laksono, Teodoro A. Amatosa, Jr., Hilda Pebrianti Octaviana Sitorus, Wentika Putri Kusuma Asih, Sulistijono Sulistijono

Makara Journal of Technology

Hydroxyapatite (HAp) is one of the constituent minerals of bone and teeth, that has been widely used for synthesizing bone graft. Due to the limitation on properties of the hydroxyapatite, it is doping with Magnesium (HAp-Mg). The addition of Chitosan (Chi) was expected to improve the antibacterial properties of HAp-Mg. The present research aims to study the influence of Chitosan with 0, 5, 15, and 25 wt% addition on biocompatibility properties of Chi/HAp-Mg composite. HAp-Mg was synthesized using the sol-gel method; meanwhile, Chi/HAp-Mg composite was manufactured by mixing Chitosan in acetic acid, and HAp-Mg was added into the mixture. The …

Evaluation Of Primal-Dual Splitting Algorithm For Mri Reconstruction Using Spatio-Temporal Structure Tensor And L1-2 Norm, Mia Rizkinia, Masahiro Okuda

Makara Journal of Technology

Magnetic resonance imaging (MRI) is an essential medical imaging technique which is widely used for medical research and diagnosis. Dynamic MRI provides the observed object visualization through time and results in a spatiotemporal signal. The image sequences often contain redundant information in both spatial and temporal domains. To utilize this characteristic, we propose a spatio-temporal reconstruction approach based on compressive sensing theory. We apply spatio-temporal structure tensor using nuclear norm, in addition to the wavelet sparsity regularization. The spatio-temporal structure tensor is a matrix that consists of gradient components of the MRI data w.r.t the spatial and temporal domains. For …

Influence Of Nh4f In Dextran Based Biopolymer Electrolytes: Conductivity And Electrical Analysis, Muhamad Hafiz Hamsan, Mohd Fakhrul Zamani Kadir, Shujahadeen Bakar Aziz, Muhammad Amirul Solihin Azha, Saifful Kamaluddin Muzakir

Makara Journal of Technology

Dextran polymer host was doped with different concentrations of ammonium fluoride (NH4F) via casting technique. In this present work, dextran-NH4F film has been employed to investigate the ionic conductivity using electrochemical impedance spectroscopy from 50 to 5 MHz. The highest room temperature conductivity is achieved at (2.33 ± 0.76) × 10-3 S cm-1 with 40 wt.% NH4F. The electrolyte is found to obey Arrhenius rule at high temperature with activation energy of 0.21 eV. Dielectric analysis has been performed to obtain better understanding on the conductivity pattern. The dielectric parameters e.g. ɛreal, ɛimag, Mreal, and Mimag have been tested as …

Acute Toxicitystudy Of Choline Based Ionic Liquids Towards Danio Rerio Fish And The Aggregation Behavior Of Their Binary Mixtures, Mansoor Ul Hassan Shah, Nasruddin Nasruddin, Suzana Bt Yusup, Muhammad Moniruzzaman

Makara Journal of Technology

Marine oil spills are effectively controlled by chemical dispersants. However, the toxicity associated with it reduce its employment in marine environment. To overcome this limitation, the acute toxicity of choline based ionic liquids was evaluated as a potential low toxic variant for oil spill remediation. Further, the aggregation behavior of the individual as well as their binary mixtures was also evaluated by employing tensiometry technique. The half-lethal concentration, LC50on zebrafish (Danio rerio) of three choline based ionic liquids showed that the studied ionic liquids (ILs) fall in the range of “practically nontoxic” ( 100-1000 mg L-1).Various micellar properties showed that …

Neutron Diffraction Study Of Multiferroic 0.6nife2o4/0.4batio3 Composite, Engkir Sukirman, Yosef Sarwanto, Syahfandi Ahda, Andon Insani

Makara Journal of Technology

Neutron diffraction study on the 0.6NiFe2O4/0.4BaTiO3 multiferroic composite has been carried out. The 0.6NiFe2O4/0.4BaTiO3 multiferroic composites have been synthesized by solid reaction method. In this study, 20 g of BaTiO3 (BTO) and 20 g of NiFe2O4 (NFO) compounds were prepared from the powder raw materials of BaO3 and TiO2 for BTO, and NiO and Fe2O3 for NFO. Furthermore, both BTO and NFO were each crushed for 5 hours using High Energy Milling (HEM). Then the BTO and NFO were calcined in the furnace at 950 °C/5 hours and 900 °C/5 hours, respectively. Both NFO and BTO precursors were manually mixed …

Incorporating Geophysical Data In Slope Stability Modeling For Two Slopes In Arkansas, Vanessa Lebow

Graduate Theses and Dissertations

Slope failures in the United States alone cause millions of dollars in damage to infrastructure, threaten national monuments, create environmental hazards, and take an average of 25-50 lives a year. With the inevitable construction that occurs on slopes, it is imperative that the slopes be properly designed which requires a thorough understanding of slope grade, subsurface soil conditions, soil strength parameters, water table locations, and depth to bedrock across the entire site. The preferred method of data collection would be to use borings and other in-situ methods; however, sometimes due to cost constraints or site accessibility only a very limited …

Evaluation Of Concrete Deck Curing Regimens Using Capillary Pressure Sensing System, Samuel Spann

Graduate Theses and Dissertations

Early-age plastic shrinkage cracking is a common problem with the construction of concrete bridge decks due to the high surface area-to-volume ratio and exposure to potentially detrimental environmental effects. Curing regimens are utilized to mitigate cracking risk during the plastic stage of the concrete; the curing regimens evaluated for this study were wet burlap-polyethylene sheeting, two acrylic curing compounds, and one lithium compound. Capillary pressure in the water filled pores has been shown to correlate to the plastic shrinkage cracking risk of concrete. A new portable system has been developed to measure the capillary pressure that could potentially be used …

Truck Activity Pattern Classification Using Anonymous Mobile Sensor Data, Taslima Akter

Graduate Theses and Dissertations

To construct, operate, and maintain a transportation system that supports the efficient movement of freight, transportation agencies must understand economic drivers of freight flow. This is a challenge since freight movement data available to transportation agencies is typically void of commodity and industry information, factors that tie freight movements to underlying economic conditions. With recent advances in the resolution and availability of big data from Global Positioning Systems (GPS), it may be possible to fill this critical freight data gap. However, there is a need for methodological approaches to enable usage of this data for freight planning and operations.

To …

Study Of Internal Strains Developed In Concrete Decks At Early Ages In Steel Continuous Bridges, Fernando R. Benitez Ortiz

Graduate Theses and Dissertations

The Arkansas Department of Transportation (ARDOT) has identified bridge deck cracking shortly after concrete decks are placed and prior to applying traffic loads. Previous researchers have confirmed improper construction practices and design methods can lead to deck cracking. Currently, many contractors throughout Arkansas are using continuous deck pours. This construction approach may restrict the concrete slab from movement during early age shrinkage, causing tensile stresses to develop. The final stresses at the end of construction must be lower than the concrete tensile strength, if not cracking issues will develop. Eventually, these cracks may enlarge due to service load stresses and …

Evaluation Of Fracture Principles In Asphalt Concrete Utilizing The Sc(B) Geometry, Airam Marlee Morales Vega

Graduate Theses and Dissertations

Since cracking is one of the principal distresses to be considered in asphalt concrete, multiple fracture tests and geometries have been used to quantify cracking resistance. One of the most popular geometries that have been used in fracture tests is the Semi-Circular bend (SC(B)). However, for this geometry, most of the fracture test methods use different parameters such as thickness, testing temperatures, and loading rates. Thus, the purpose of this research was first to evaluate fracture energy by performing a ruggedness test based on ASTM E1169. Then, to apply fracture mechanics concepts to evaluate three specimen thicknesses (25, 50, and …

Multifunctional Lightweight Aggregate Containing Phase Change Material And Water For Damage Mitigation Of Concrete, Wenyu Liao, Aditya Kumar, Kamal Khayat, Hongyan Ma

Materials Science and Engineering Faculty Research & Creative Works

This paper presents an innovative concept of multifunctional lightweight aggregate, which is produced by loading phase change material (PCM) into the interior of lightweight sand (LWS) and sealing the surface pores using water. The PCM loaded in the LWS functionalizes it as a temperature management agent in concrete, and the water in surface pores enables internal curing. It has been found that the particle shape and pore structure of crushed expanded shale LWS makes it an ideal carrier for PCM, loading sufficient PCM and maintaining better (compared to natural sand) mechanical interlocking. When coupled with the internal curing effect, the …

Behavior Of Hollow-Core Composite Bridge Columns Having Slender Inner Steel Tubes, Mohanad M. Abdulazeez, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper experimentally investigates the seismic behavior of three large-scale hollow-core fiber-reinforced polymer-concrete-steel (HC-FCS) columns. An HC-FCS column consisted of a concrete shell sandwiched between an outer glass fiber-reinforced polymer (GFRP) tube and an inner steel tube. Both tubes provided continuous confinement for the concrete shell along with the height of the column. The columns had two different steel tube diameter-to-thickness (Ds/ts) ratios of 85, and 254. Each steel tube was embedded into the footing, with an embedded length of 1.25-1.6 times its diameter, while the GFRP tube was not embedded into the footing. Two columns were tested as as-built …

Review On Rheological Characterization Of Bio-Oils/Bio- Binders And Their Applicability In The Flexible Pavement Industry, Ahmed Hemida, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper mainly presents a qualitative review on to what extent the bio-oil has the potential to replace asphalt binder for a sustainable, flexible pavement industry. The current research comprises reviews on the rheological characterization of pure bio-oils and bio-oil modified binders (bio-binders) investigated in the literature. The literature showed that several sources of bio-oils have the potential to contribute to the flexible pavement industry. This research mainly discusses the high-temperature properties, especially viscosity for the construction process (mixing and compaction) and viscoelasticity for the elevated temperature of in-service roads. This review paper encourages orientation towards these kinds of renewable …

Safety Assessment Of Road Vehicle In Crosswind Considering Driver Behavior, Jiexuan Hu

LSU Doctoral Dissertations

With expansion of the economy, more and more highway networks extend to coastal areas and mountain valley areas. Vehicles will be exposed to strong crosswinds when driven on these highway roads, especially in hurricane season and in winter in these two different topographic areas. Strong crosswinds threaten the safety of transportation infrastructure and passing vehicles in forms of vehicle accidents that usually result in traffic blockage and driver injury, posing negative effects on economic growth. This dissertation aimed to evaluate the vehicle safety when running through crosswinds in consideration of driver behaviors.

Firstly, the aerodynamic characteristics of road vehicles were …

The Application Of Gray-Scale Level-Set Method In Segmentation Of Concrete Deck Delamination Using Infrared Images, Chongsheng Cheng, Zhigang Shen

Department of Construction Engineering and Management: Faculty Publications

Conventional nondestructive delamination detection of concrete pavements through thermography is often based on temperature contrasts between delaminated and sound areas. Non-uniform backgrounds caused by the environmental conditions are often challenging for contrast-based methods to robustly differentiate the delaminated areas from the sound areas. Instead of focusing on the temperature contrast, this study proposes a temperature gradient-based level set method (LSM) to detect boundaries for delamination segmentations. A modified edge indicator function is developed to represent the normalized temperature gradient of a thermal image. The experimental study was conducted to evaluate its applicability and stability for boundary detection in terms of …

Pore Characteristics And Computed Permeability Of Pastes Subject To Freeze-Thaw Cycles At Very Early Ages By X-Ray Ct, Ya Wei, Zehong Wu, Xiang Gao

International Conference on Durability of Concrete Structures

Freeze-thaw cycling can damage microstructure of concrete and reduce the service life of concrete structures. This is especially detrimental for concrete subject to freeze-thaw cycles at very early-ages, such as within the first few days after constructions. Typical low and high water-to-cement (w/c) ratio pastes are investigated experimentally and numerically in this study. The pastes are subject to freeze-thaw cycles at the age of 1, and 7 days and then sealed-cured to the age of 45 days. The pore size distribution is measured and quantified by X-ray computer tomography (CT) with high resolution. The permeability of the corresponding pastes is …

Development Of Engineered Cementitious Composites With Conductive Inclusions For Use In Self-Sensing Applications, Benny Suryanto Dr, Danah Saraireh Ms, Steven Walls Mr, Jaehwan Kim Dr, W John Mccarter Prof

International Conference on Durability of Concrete Structures

The mechanical and a.c. electrical properties of a new varietal of engineered cementitious composite (ECC) incorporating conductive inclusions are presented. Electrical measurements were undertaken over a wide frequency range while curing and when under uniaxial tensile loading to study the influence of ongoing hydration and multiple microcrack formation on the composite electrical impedance. When presented in Nyquist format, the work shows that conductive inclusions reduce the bulk resistance of the composite while enhancing its polarizability, transforming the classic, single-arc bulk response of typical cement-based materials to a two-arc response. The bulk resistance was shown to increase with time and damage, …

Rehabilitation Of Low Rise Rcc Structure Along 9m High Retaining Wall, Aniruddha Nakhawa Er, Vivek Deshmukh Dr

International Conference on Durability of Concrete Structures

Mumbai is the financial, commercial and entertainment capital of India, facing bigger challenges in accommodating its over growing population day by day. The Mumbai City has population of 18.4 million over its 634 km2 area, ie. Almost 350 ft2/person. This enormous rise in population density has restricted the development to expand vertically. This also, results in growth of major slums, which is almost 62% of the population dwelling in slums. Subsequently, the authorities is in need of a large scaled Slum Sanitation Program, which utilize the scarcely available land for construction of Community Toilet Blocks with involvement of NGO’s and …

Residual Service Life Estimation And Its Importance For Pretensioned Concrete (Ptc) Bridges In Coastal Cities, Dyana Joseline, Deepak K. Kamde, Sripriya Rengaraju, Radhakrishna G. Pillai

International Conference on Durability of Concrete Structures

Many pre-tensioned concrete (PTC) bridges are experiencing premature chloride-induced corrosion. Hence, it is crucial to estimate their residual service life and update it with newer data on a periodic basis - to plan for corrosionpreventionorcontrolmeasuresandensuresafetyofexistingbridges.Criticalchloridethreshold(Cl th) is one of the parameters necessary to estimate the corrosion initiation period. However, quantitative estimates on Clth for prestressing (PS) steel are not well-reported in literature. This paper presents experimental data on the Clth of PS steel, the chloride diffusion coefficient (Dcl), and surface chloride concentration (Cs) of concrete samples obtained from a PTC bridge girder in a coastal city in India. For estimation …

Mechanical And Microstructure Characteristics Of Concrete-Mixtures Designed For Durability Of Rc-Structures In Corrosive Environment, Saeid A. Alghamdi Dr., S. Ahmad, M. M. Khaled

International Conference on Durability of Concrete Structures

As exposures to chloride-salts are known as prime factors causing initiation and continuity of corrosion-process of steel reinforcement bars in reinforced concrete (RC) structures, it has always been a major concern for designers considering the requirements of structural-durability for targeted-service life of RC-structures in aggressively corrosive environments typically prevalent in coastal regions. Research works previously reported by the researchers have modeled corrosion-process in terms of corrosion-current density, and it was realized that concrete-mixtures design quality and characteristics, degree of exposures to corrosive-agents such as chloride salts, and protective-concrete cover-thickness are now known beyond doubt to be determinant factors as regards …

Study On Accelerated Microbial Corrosion Of Concrete By Artificially Intensified Sewage, L. J. Kong, M. F. Cao, Xiangming Zhou Prof, H. R. Lu, H. Lu, G. Kastiukas

International Conference on Durability of Concrete Structures

In this study, the artificially intensified sewage with different levels of chemical oxygen demand (COD) were prepared, and the changes in weight and strength, as well as the micro morphology, mineral compositions and pore structure of concrete specimens immersed in the artificially intensified sewage and water were investigated in comparison. In parallel, the COD, pH, H₂S and O₂ values, as well as the microbial species and contents of sewage were monitored in the corrosion process. Furthermore, the microbial structure and activities within biofilm developed on concrete surface were also analyzed. The results indicated that the increase of …

Service Life And Life-Cycle Assessment Of Reinforced Concrete With Fly Ash And Limestone Calcined Clay Cement, Ravindra Gettu, Radhakrishna G. Pillai, Manu Santhanam, Sundar Rathnarajan, Anusha Basavaraj, Sripriya Raju, Yuvaraj Dhandapani

International Conference on Durability of Concrete Structures

Environmental impact due to the emission of carbon dioxide during concrete production can be taken care by reducing the clinker content in the cement. The clinker content can be reduced by replacing it with fly ash and limestone calcined clay. Such systems can have a potential to exhibit enhanced durability/service life when exposed to chloride and carbon dioxide. However, estimating probabilistic service life of concretes with such alternative binder systems is difficult due to the lack of quantitative estimates of the input parameters such as chloride diffusion coefficient (D_Cl), ageing coefficient (m), carbonation coefficient (K_CO2), and …

Effect Of Mix Parameters On Strength Of Geopolymer Mortars - Experimental Study, Abdolhossein Naghizadeh, Stephen O. Ekolu

International Conference on Durability of Concrete Structures

In this article, an investigation is reported on development of strength in South African fly ash (FA) – based geopolymer mixtures. Locally available Class F, FA from one of the coal power stations was used in the investigation. The alkali-activator used consisted of sodium silicate (SS) and sodium hydroxide (SH) mixed in varied ratios of 1.0, 1.5, 2.0, 2.5 and 3.0 SS to SH. The SS of silicate modulus = 2.5 was used but the SH concentration in the activator was varied to 10, 12, 14M NaOH. Mortars of 2.25 aggregate/binder ratio were used to prepare 50 mm cubes. In …

New Model For Natural Carbonation Prediction In Reinforced Concrete – Concept And Validation On Chemical Admixtures, Stephen O. Ekolu, M Raats

International Conference on Durability of Concrete Structures

A new model for prediction of natural carbonation in reinforced concrete structures has recently been developed and presented in (Ekolu, 2018). For brevity, the model is referred to as ESS model. It employs concrete strength as the primary property depicting core carbonation behaviour of any given concrete while other factors induce secondary influence. Chemical admixtures in concrete significantly influence concrete behaviour. Using experimental data from the literature (Dan-Herrera et al., 2015), the model behaviour is verified under use of various types of chemical admixtures of concrete including internal curing, shrinkage reducing, viscosity modifying, and high range water reducing admixtures. Class …

Strength And Durability Performance Of Ultra-High-Performance Cementitious Composite Enhanced With Carbon Nanofibres, Jlg Nim, Sudharshan Naidu Raman, Mfm Zain, R Hamid, Fc Lai

International Conference on Durability of Concrete Structures

Ultra-high-performance concrete (UHPC) is known for exhibiting excellent strength and a more durable matrix compared to conventional concrete. Typically UHPC consists of carefully selected constituent materials of: ultrafine graded sand, silica fume (or other alternative binders), steel micro-fibres, and ordinary (or special blends) Portland cement. This study was initiated to synthesize a new blend of Ultra-high-performance cementitious composite (UHPCC) with compressive strength higher than 150 MPa under normal curing conditions, and to investigate the influence of two different sources of carbon nanofibres (CNF) on its strength, durability and microstructure properties. Several mix designs with different CNF percentages were designed, optimised …

Strength And Durability Of Hybrid Fibre Reinforced Binary Blend Geopolymer Concrete, Namasivayam Ganesan, P V Indira, R Sahana

International Conference on Durability of Concrete Structures

This paper deals with an investigation on the influence of hybrid fibres on the strength and durability of binary blend geopolymer concrete. Geopolymer concrete was prepared using Fly ash and GGBS as source material and mix design was carried out as per the guidelines of Professor Rangan of Curtin University, Australia. Different fly ash-GGBS proportions namely 50-50%, 60-40%, 70-30%, 80-20% and 90-10% were considered. The tests on Geopolymer concrete reveal that the compressive strength increases as the percentage of GGBS increases up to 30%. Hence the combination of 70% fly ash and 30% GGBS was considered as a base material. …

Program Progress Performance Report #5, Missouri University Of Science And Technology. Inspire - University Transportation Center

Semi-Annual Progress Reports

No abstract provided.

Soil-Recycled Aggregate-Geopolymer Road Base/Subbase Mixtures: Steps Towards Sustainability, Mohammad Khattak, Daniel Odion

Data

Corresponding data set for Tran-SET Project No. 18GTLSU10. Abstract of the final report is stated below for reference:

"This study deals with the development of Soil-Geopolymer mixtures using flyash, alkali activator and recycled aggregates (RAG) including recycled concrete (RCA) and reclaimed asphalt (RAP) as an alternative to soil-cement for pavement base and subbase layers. Several mix constituents were varied such as flyash type and content, RCA and RAP content and ratio of sodium silicate and sodium hydroxide. Experiment design was established and mechanical and durability characteristics of Soil-RAG-Geopolymer mixtures were evaluated and then compared to the conventional soil-cement mixtures. The …

In-Plane Cyclic Shear Performance Of Pipe Stem Reinforced Cob Wall, Dezire Q'Anna Perez-Barbante

Master's Theses

This thesis investigates full-scale pipe stem reinforced cob walls under in-plane cyclic shear loads. Cob is the combination of clay subsoils, sand, straw and water that is built in lifts to produce monolithic walls. There is insufficient amount of information on cob as a building material in today’s age. The prior research that exists has examined varying straw content and type, water content, and mixture ratios to determine their effect on strength. There is currently one report that analyzes full-scale cob walls under in-plane loading. This thesis looks to iterate the full-scale tests and specifically studies the effect of reinforcement …