Civil and Environmental Engineering Commons^™

Iso 9001:2015 Risk-Based Thinking: A Framework Using Fuzzy-Support Vector Machine, Ralph Sherwin A. Corpuz

Makara Journal of Technology

Risk-based thinking (RBT) is one of the distinct new features of the International Organization for Standardization 9001:2015. Interestingly, the standard does not prescribe any tools. Hence, organizations are puzzled as to the extent of conformance. Some organizations have adopted formal tools. However, these tools seem insufficient in linking the standard into an evidence-based decision support system. To resolve gaps in RBT implementation, this paper proposes a framework based on fuzzy inference system (FIS) and support vector machine (SVM) to automate risk analysis and evaluation, proposal and verification of action plans, and prediction of the feasibility of risks and opportunities according …

Ccfss Technical Bulletin Fall 2020, Vol. 21, Number 2, Wei-Wen Yu Center For Cold-Formed Steel Structures

CCFSS Technical Bulletins (1993 - 2020)

No abstract provided.

Ccfss Technical Bulletin Fall 2020, Vol. 21, Number 1, Wei-Wen Yu Center For Cold-Formed Steel Structures

CCFSS Technical Bulletins (1993 - 2020)

No abstract provided.

Experimental Testing Of A Lightly Reinforced Concrete Shear Wall, Jerry Hue Truong Luong, Rory Sebastian De Sevilla

Architectural Engineering: Graduate Reports

This project report summarizes the findings of a half-scale laboratory test on a slender lightly reinforced concrete (LRC) shear wall subjected to cyclic loading. LRC shear walls, specifically those of pre-1980’s type design, have longitudinal and horizontal reinforcement ratios near the code minimum, while often lacking confinement in the wall end-zones. These walls are thought to exhibit brittle compressive failure mechanisms such as rebar buckling or concrete crushing based on observations from past earthquakes. Non-ductile concrete buildings are a large contributor to earthquake losses around the globe, as noted in the San Fernando (1971) and Christchurch (2011) earthquakes, to name …

Wei-Wen Yu Center For Cold-Formed Steel Structures (1990-2020), Roger A. Laboube, Wei-Wen Yu

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

Final Report: Wei-Wen Yu Center For Cold-Formed Steel Structures

Seismic Loading Effects Within Orthogonally Connected Steel Lateral Force Resisting Systems, Alhussin Faraj Aliwan

Graduate Theses and Dissertations

Steel buildings located within seismically active regions require special design considerations to ensure public safety and prevent collapse during an extreme seismic event. Two commonly used steel systems are special moment frames (SMFs) and buckling-restrained braced frames (BRBFs). When two seismic systems share a common column in an orthogonal configuration (such as at a building corner), design specifications currently consider a 100+30 rule wherein the shared column is designed for 100% fuse demand in one direction, plus 30% fuse demand from the other direction. While this rule has been shown to be reasonable for elastic building response, a few studies …

Using Bcsa Cement To Repair Waterway Transportation Structures, Anazaria Johanis Ortega Gonzalez

Graduate Theses and Dissertations

Many maritime structures (e.g., locks, dams, ports) in the US are either reaching or are past their design lives, and there are limited funds for the necessary maintenance activities which can lead to repairs that requires closures. These structures are not easy to detour and often require dewatering before repairs can be made, closures can cause delays and business-related losses which can have a large effect on the nation’s economy. Thus, it is advantageous to reduce the repair time for maritime structures. BCSA (belitic calcium sulfoaluminate) cement is a promising material to perform this type of repair due to its …

Comparison Of Additively Manufactured And Wrought 17-4 Ph Stainless Steels In Ultra Low Cycle Fatigue, Timothy Strasser

Graduate Theses and Dissertations

Additive manufacturing (AM) processes allow for creation of complex geometries that are otherwise impractical to fabricate with traditional subtractive methods. AM technology has potential to improve the optimization of seismic lateral force resisting components which dissipate seismic energy through large plastic strains; however, the ultra low-cycle fatigue performance of AM metals are not yet well understood. Void formation during the AM fabrication process has potential to affect performance. This study compares the performance of heat-treated and non-heat-treated AM and wrought 17-4PH stainless steel in Ultra Low Cycle Fatigue. To understand ULCF performance differences between the AM and wrought specimens, post …

Behavior Of Concrete Structures Reinforced With High Strength Steel, Rahman S. Kareem

Graduate Theses and Dissertations

The structural strength and corrosion resistance of concrete members are improved when A1035 steel is used as the main reinforcement. The enhancement of A1035 is achieved by the modification of the composition and microstructure of the steel. Therefore, the behavior of concrete structures reinforced with high-performance steel (A1035) is different from those reinforced with the regular steel (A615). Concrete bridge decks reinforced with different amounts of A1035 were studied in this research program. The structural behavior of twelve concrete bridge decks reinforced with A615 Grade 420 (60 ksi) and A1035 Grade 830 (120 ksi) steel was investigated at both service …

Moisture Monitoring Of A Clt Structure In A Southern Climate, Elizabeth Poblete

Graduate Theses and Dissertations

Understanding of moisture behavior in cross laminated timber (CLT) is critical to the widespread use of CLT in construction in the United States. Currently, very little data exists on the long-term impact of moisture on CLT. The objective of this research is to collect data regarding the long-term moisture variation in the CLT panel at the University of Arkansas Adohi Hall residence hall. The climate of Northwest Arkansas is different from previously monitored buildings, as they were in the Pacific Northwest. Comparatively, Northwest Arkansas has a warmer climate with higher average annual precipitation. Waterproofing efforts are usually employed to prevent …

Innovative Approach To Repair Corroded Steel Piles Using Ultra-High Performance Concrete, Binod Shrestha, Ahmed Gheni, Mohanad M. Abdulazeez, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Steel H-piles are a common structural system in existing bridges. Many steel H-piles have been corroded as a result of severe weather and acid/alkaline salt exposures, causing a reduction in the axial load capacity. This paper experimentally investigates the use of ultra-high performance concrete (UHPC) encasement as a novel repair method for corroded steel H-pile. UHPC displays better tensile strength, early compressive strength, workability, and durability compared with conventional concrete. The proposed repair is used to bridge the corroded section in H-pile using either a cast-in-place or precast UHPC elements. A series of push-out tests was conducted on eight full-scale …

Bond Behavior Between Steel Fiber Reinforced Polymer (Srp) And Concrete, Xingxing Zou, Lesley Sneed

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Steel fiber reinforced polymer (SRP) composite materials, which consist of continuous unidirectional steel wires (cords) embedded in a polymeric matrix, have recently emerged as an effective solution for strengthening of reinforced concrete (RC) structures. SRP is bonded to the surface of RC structures by the same matrix to provide external reinforcement. Interfacial debonding between the SRP and concrete is a primary concern in this type of application. This study aimed to investigate the bond characteristics between SRP and concrete determined by single-lap direct shear tests with different composite bonded lengths and fiber sheet densities (cord spacings). Specimens with medium density …

Tensile Behavior Of Frp Anchors Made From Cfrp Ropes Epoxy-Bonded To Uncracked Concrete For Flexural Strengthening Of Rc Column, Yasir Saeed, Wisam Amer Aules, Franz N. Rad, Anis M. Raad

Civil and Environmental Engineering Faculty Publications and Presentations

One of the major problems with using fiber reinforced polymer (FRP) in strengthening reinforced concrete (RC) structures is FRP premature debonding. Anchoring FRP materials to concrete has become associated with most of the strengthening techniques. One of the anchoring techniques is using handmade anchors made from FRP materials. In previous studies, most FRP anchors were made from rolling pre-cut FRP sheets and had short embedment (mm) as they were used for flexural or shear strengthening of RC beams. In the present study, FRP anchors were made from carbon fiber reinforced polymer (CFRP) ropes and had long embedment to be used …

Tanzanian Concrete Masonry Walls, Edward J. Kaminski

Architectural Engineering

Walls that replicate masonry walls used in Tanzania are constructed and tested. The results from testing was compared with the respective predictions made using code guidelines from ASCE 7 and TMS 402.

Exploring The Variability In The Gray Scale Imaging Process Of Asphalt Samples, David Oluwawade Olatunji

Civil Engineering Undergraduate Honors Theses

Gray scale image analysis is a powerful tool for testing asphalt concrete materials. From material composition to surface properties, gray scale analysis has shown evidence as a non-invasive way to obtain information from asphalt samples. Casillas et al. used a gray scale analysis to measure the Representative Volume Element of three asphalt sample geometries to understand the minimum size at which an asphalt sample is representative of a larger homogeneous mixture [1]. While the gray scale analysis used in this experiment yielded results, there were unknown factors in the image capturing process. Particularly, not much was known about the effect …

Analysis Of Electric Vehicle Charging Behavior Patterns With Function Principal Component Analysis Approach, Chenxi Chen, Yang Song, Xianbiao Hu, Ivan G. Guardiola

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This manuscript focused on analyzing electric vehicles’ (EV) charging behavior patterns with a functional data analysis (FDA) approach, with the goal of providing theoretical support to the EV infrastructure planning and regulation, as well as the power grid load management. 5-year real-world charging log data from a total of 455 charging stations in Kansas City, Missouri, was used. The focuses were placed on analyzing the daily usage occupancy variability, daily energy consumption variability, and station-level usage variability. Compared with the traditional discrete-based analysis models, the proposed FDA modeling approach had unique advantages in preserving the smooth function behavior of the …

Investigation Of Bolted Connections In Cold-Formed Steel Members Using Sae J429 Bolts, Babak Yeganeh, Cheng Yu

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The report presents a research project aimed at comparing ASTM and SAE J429 bolts. The research includes comparison of those two bolt standards in terms of tensile strength, chemical and mechanical properties, shanks length, head size, thread profile and bolt styles. The research shows that the overall dimension, tensile strength, head and shank size for both standards are the same and no considerable difference is observed.

Real Records Scaling Factors Optimization To Fit The Syrian Design Spectra Using Genetic Algorithm, Seraj Jdyd

Journal of the Arab American University مجلة الجامعة العربية الامريكية للبحوث

After selecting real seismic records it is necessary to scale these records to match the intensity of the earthquake expected for the site. Generally, scaling can be made by ground motions uniform scaling in time domain which is simply scaled up or down the ground motions uniformly to best match (in average) the target spectrum within a period range of interest. It’s an engineer’s job to find the best scaling factors to best match the target spectrum, which is a complex task, so we employed the Genetic Algorithm (GA) in finding those scaling factors to achieve the best results.

Genetic …

The Provision Of Educational Needs Of The Old City Of Sana'a According To The Concept Of Sustainable Preservation, Ali Amer

Journal of the Arab American University مجلة الجامعة العربية الامريكية للبحوث

The idea of sustainable development begun in the eighties of the 20th century, soon after, this concepts started to be use in different fields, including the preservation of historical cities, which known as sustainable preservation. Sustainable preservation cares about using the valuable cultural heritage to meet the modern needs of the historical cities as a way of continuously preserving the heritage, and to bring it to the next generations as good as possible.

The current lack of educational environment in the old city of Sanaa is one of the main dangers to preserve the authentically of the ancient city, especially …

Effect Of Landfill Leachates On Some Water Quality Indicators Of Selected Surface Water And Groundwater At Ilokun, Ado-Ekiti, Nigeria, Olorunwa Omofunmi, Adesola Satimehin, Abraham Oloye, Okwunna Umego

Makara Journal of Technology

This study was conducted to examine the impact of dumpsites on the quality of groundwater and surface water. The water samples and leachates were collected from dumpsites in respective zones. The physicochemical properties of the samples were examined and determined in accordance with the standards of the American Public Health Association. Results indicated that the groundwater and surface water that are close to the dumpsites have an electrical conductivity of 385 and 245 Sd/cm, total dissolved solids of 168 and 128 mg/L, a turbidity of 4.6 and 22 NTU, a total alkalinity of 103 and 50 mg/L, a total hardness …

Microstrip Filters: A Review Of Different Filter Designs Used In Ultrawide Band Technology, Hussain Bohra, Giriraj Prajapati

Makara Journal of Technology

In this study, optimization techniques applied in designing microstrip bandpass ultra-wideband (UWB) filters are presented. Optimization based on various defected ground structure techniques, resonator designs, and type of dielectric materials is discussed. Microstrip bandpass filters implemented at UWB frequency bands used in wireless communication systems have key features to control frequency response in passband and stopband. Optimization techniques are studied to attain optimum performance of bandpass microstrip filters to ensure minimum insertion loss, high selectivity, compactness, sharp transitions at cut-off frequencies, high return loss, and excellent linearity. Extensive study shows that proper selection of fabrication techniques and type of material …

Effect Of Catholyte Concentration On Current Production During Chocolate Industry Wastewater Treatment By A Microbial Fuel Cell, Diana Rahayuning Wulan, Suprihanto Notodarmojo

Makara Journal of Technology

Microbial fuel cells (MFCs) use bacteria as a catalyst to oxidize organic and/or inorganic substrates and produce electric currents. Wastewater could function as an electron donor in the anode chamber and, thus, represents a very promising energy source. Catholytes, as electron acceptors, influence power production in MFCs by increasing the availability of electrons. The present research aims to determine the influence of catholyte concentration on current production in an aerobic two-chamber MFC. Aerobic treatment was carried out in the two-chamber MFC operated in an incubator at 37  1 °C with and without aeration in the cathode chamber. Wastewater from …

Evaluation Of Il-17a And Il-17f Gene Expression In Peripheral Blood Mononuclear Cells In Different Clinical Stages Of Chronic Hepatitis B Infection In An Iranian Population, Tannaz Akbari Kolagar, Seyed Reza Mohebbi, Fatemeh Ashrafi, Shahrzad Shoraka, Hamid Asadzadeh Aghdaei, Mohammad Reza Zali

Makara Journal of Technology

Hepatitis B virus (HBV) infection is one of the main causes of liver damage, which can also lead to chronic hepatitis B (CHB) infection. More than 240 million individuals worldwide are chronic carriers of HBV. Among individuals with CHB who are untreated, approximately 15% – 40% will progress to liver cirrhosis or cancer. The interactions between HBV and host immune response play significant roles in the progression of CHB. CHB can be generally divided into four different clinical phases: immune tolerance (IT), immune clearance, inactive carrier, and Hepatitis B surface antigen (HBsAg)-negative reactivation phase (ENEG). Many studies showed that interleukins …

Redesign Of Product Packaging With Kansei Engineering: Empirical Study On Small-Medium Enterprises In Indonesia, Amalia Suzianti, A. Aldianto

Makara Journal of Technology

Small-medium enterprises (SMEs) in Indonesia have been proven to be one of the important pillars of the national economy. Unfortunately, some problems hinder their development, and one of the critical problems is the quality of product packaging. The packages of SME products are considered poor, dirty, and unattractive. Packaging problem is one of the factors why consumers are less interested in buying and why SME products always lose in the competition with other products. This study discusses how to employ Kansei engineering to design better SME product packaging with a focus on psychological (affective) aspects. This research concludes that there …

Effect Of Pvdf-Ca Ratio On Electrospun Membrane For Water–Oil Filtration Application, Mohamad Haziq Alias, Izan Izwan Misnon, Rajan Jose

Makara Journal of Technology

Oil spillage and generation of industrial water–oil wastewater mixture ignite a focus on filtration technology. Electrospinning technique provides a versatile route in producing tunable diameter and pores in nanofiber filtration membrane development. In this work, polyvinylidene difluoride (PVDF) and cellulose acetate (CA) electrospun membrane at different concentration ratios were synthesized for water–oil filtration application. The polymeric solutions were characterized using viscometer and conductivity testing, whereas the membranes were analyzed using contact angle, tensile test, scanning electron microscopy (SEM), and filtration testing of oil (dichloromethane). Conductivity test showed a decreased conductivity along with decrement of CA ratio in the polymeric solution. …

Performance-Shaping Factors Of Personnel Performing Evacuation And Escape On Offshore Installations In Tropical, Norafneeza Norazahar, Nur Azizah Arryanie Morshidi, Arshad Ahmad, Wijayanuddin Mohd Ali

Makara Journal of Technology

Performance-shaping factors (PSFs) are used to address the strengths and weaknesses of workers performing escape and evacuation activities. These PSFs are time, environmental factors as stressors, complexity of activities, experiences and training, interaction between workers and emergency equipment, workers’ physical conditions, and procedures. This paper presents a survey work on fitness for the duty of workers performing basic offshore survival and emergency response training. The training provides credible scenarios of escape and evacuation in case of an emergency of offshore installations in tropical waters. The survey is conducted among participants of the tropical basic offshore safety induction & emergency training …

Evaluation Of Anti-Aging Performance Of Biochar Modified Asphalt Binder, Wenhao Dong, Feng Ma, Chen Li, Zhen Fu, Yue Huang, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

As a renewable biomass resource, biochar is new to modify or replace asphalt binder in pavement engineering. This paper focuses on the effect of biochar on the anti-aging performance of asphalt binder. The short-and long-term aging properties of biochar modified asphalt binder were investigated using dynamic shear rheometer (DSR) and bending beam rheometer (BBR) tests. The modification mechanism was investigated through the Fourier-transform infrared spectroscopy (FTIR) test. The aging tests and viscosity analysis showed that the softening point of biochar modified asphalt binder was higher than base asphalt binder, while the aging index and aging viscosity ratio were lower than …

Risk Assessment Of Water Inrush Caused By Karst Cave In Tunnels Based On Reliability And Ga-Bp Neural Network, Zhaoyang Li, Yingchao Wang, C. Guney Olgun, Shengqi Yang, Qinglei Jiao, Mitian Wang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In order to evaluate the risk level of water inrush caused by karst cave accurately and effectively, a novel quantitative assessment model was established based on the reliability theory and genetic algorithm-back propagation (GA-BP) neural network. First, the reliability theory and the calculation formula of the minimum safe thickness were used to calculate the water inrush probability. Second, the GA-BP neural network was applied to predict the disaster consequence caused by water inrush. Six factors, including water pressure, hydraulic supply, type of gap, filling situation, degree of water enrichment and reserves of cave, were selected as the input layer of …

Detection Of Corrosion-Indicating Oxidation Product Colors In Steel Bridges Under Varying Illuminations, Shadows, And Wetting Conditions, Dayakar L. Naik, Hizb Ullah Sajid, Ravi Kiran, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Early detection of corrosion in steel bridges is essential for strategizing the mitigation of further corrosion damage. Although various image-based approaches are available in the literature for corrosion detection, most of these approaches are tested on images acquired under uniform natural daylight illuminations i.e., inherent variations in the ambient lighting conditions are ignored. Owing to the fact that varying natural daylight illuminations, shadows, water wetting, and oil wetting are unavoidable in real-world scenarios, it is important to devise a robust technique for corrosion identification. In the current study, four different color spaces namely ‘RGB’, ‘rgb’, ‘HSV’ and ‘CIE La*b*’ along …

Failure Sampling With Optimized Ensemble Approach For The Structural Reliability Analysis Of Complex Problems, Christopher Eamon, Kapil Patki, Ahmad Alsendi

Civil and Environmental Engineering Faculty Research Publications

Failure sampling is a structural reliability method based on modified conditional expectation suitable for complex problems for which reliability index-based approaches are inapplicable and simulation is needed. Such problems tend to have non-smooth limit state boundaries or are otherwise highly nonlinear. Previous studies recommended implementation of failure sampling with an extrapolation technique using Johnson's distribution or the generalized lambda distribution. However, what implementation method works best is problem dependent. The uncertainty of which approach provides best results for a particular problem limits the potential effectiveness of the method. In this study, a solution is proposed to this issue that eliminates …