Civil and Environmental Engineering Commons^™

Sediment Transport On The River Bandon, Co. Cork, Ireland, Laurence Lomasney

Theses

This thesis analyses sediment transport on the River Bandon, Co. Cork, Ireland. Bedload transport and suspended sediment transport were monitored on the River Bandon over an extended period to determine rates of transport over varying flow conditions. A literature review of sediment properties (individual and bulk sediment), sediment transport, and numerical modelling was undertaken. A manual field sampling programme was undertaken at different locations on the River Bandon to collect bed sediment and suspended sediment for laboratory testing. This data, and data collected using an automatic water sampler and bed sediment traps also, was used to determine baseline conditions for …

Repairable Precast Bridge Bents For Seismic Events, Kallan Hart

Electronic Theses and Dissertations

Concrete bridge columns are designed to withstand earthquakes by undergoing large displacements. Current seismic bridge codes guarantee collapse prevention, but damage to concrete and longitudinal reinforcement often requires demolition of the structure. Repairable detailing and advanced bridge construction connections may be utilized in concrete bridge columns to allow for quick construction as well as replacement of damaged reinforcement after an earthquake. This detailing may be an attractive alternative to bridge owners to reduce construction and replacement costs as well as ensure the functionality of critical routes after an earthquake. Three repairable precast bridge columns with exposed longitudinal reinforcement were tested …

Finite Element Method Calculation Of A Prestressed Self Consolidating Concrete Beam, Vladyslav Machulsky

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this study, a prestressed concrete box beam produced for the Stalnaker Run Bridge (SRB) replacement project using self-consolidating concrete (SCC) was simulated using finite element method (FEM) numerical technique. ANSYS, a commercial FEM software, was used to build the prestressed SCC box beam model. The FEM model was developed to understand the behavior of concrete and steel under prestressing loads, long-term effects, and superimposed loads. The SOLID65 and REINF264 element types were chosen to simulate the behavior of concrete and steel materials. Experimentally measured mechanical properties of concrete from the SRB project were used in the analysis allowing for …

Review Of Innovative Rehabilitation Techniques For Reinforced Concrete Buildings, Demetrius Karoubas

Graduate Theses, Dissertations, and Problem Reports (ETD)

Building rehabilitation encompasses the act of repairing damaged structural elements, as well as the upgrading of older buildings to bring them up to modern standards. In recent years, due to the extreme economic and environmental cost of new construction, building rehabilitation is gaining ground as the most viable solution to the problem posed by damaged or substandard buildings. With the constant development of new materials with favorable properties and the improvement of our understanding of earthquakes, new rehabilitation techniques are being developed, improving on the efficiency and effectiveness of older ones. Reinforced Concrete (RC) buildings are a type of building …

Investigation Of The Experimental And Numerical Flexural Behavior Of Innovative Totally Encased Composite Beams, Nour Wehbi, Adnan Masri, Oussama Baalbaki

BAU Journal - Science and Technology

Composite steel-concrete beams have been widely used in long span construction and high rise buildings due to their favorable behavior in terms of high strength, stiffness, and ductility. In this research, the flexural behavior of an innovative steel-concrete composite section is investigated experimentally and verified numerically using ABAQUS software. The studied section is composed of steel tubular specimen or steel hollow pipe totally encased in concrete in the absence of any flexural or shear reinforcement. Instead, steel mesh wraps are used around the tubular steel specimen to provide sufficient steel-concrete bond. All of the studied beams have the same 3m …

New Type Of Lightweight Aggregate For Use In Structural Concrete, Jamal Khatib, Ali Jahami, Oussama Baalbaki, Adel Elkordi

BAU Journal - Science and Technology

This research studied the utilization of municipal solid waste incineration bottom ash (MSWI-BA) in lightweight coarse aggregate (LWC) production. A special method was followed to prepare the new aggregate to fully replace the normal aggregates (NWA) in concrete. The mechanical properties such as compressive strength, tensile strength, and elasticity modulus were investigated for the LWC concrete. Then, two beams were prepared; one from LWC and the other from NWC. The structural performance of beams made up of lightweight aggregates compared to normal aggregates was investigated. The results showed that this type of aggregates led to a 20% reduction in concrete …

Truss Bridge Damage Localization And Severity Estimation Using Influence Lines, Hamoud Alshallaqi

Civil and Environmental Engineering Theses and Dissertations

The safety of bridges is one of the primary concerns of researchers, engineers, and bridge owners and managers, especially when bridges are approaching the end of their intended service lives. The estimation of bridge condition and remaining service life is critical to prioritize the allocation of available funding for repairs and rehabilitation. Various methods, including both dynamic and static approaches, have been developed to detect and localize bridge damage and estimate its severity. This research presents a methodology for detecting a single damaged member in a truss bridge and estimating the severity of the damage using static vertical deflection influence …

Hyperspectral Imaging And Data Analytics For Civil Infrastructure Inspection, Genda Chen

INSPIRE Archived Webinars

In this 50-minute lecture, the fundamental concept of hyperspectral imaging is reviewed. Each hyperspectral image represents a narrow, contiguous wavelength range of an electromagnetic spectrum, which could be indicative of a chemical substance. All the images in the spectral range of a hyperspectral camera are combined to form a three-dimensional hyperspectral data cube with two spatial dimensions and one spectral dimension. A hyperspectral cube can be sampled in four ways: spatial scanning, spectral scanning, snapshot imaging, and spatio-spectral scanning. This presentation will be focused on spatial scanning from a line-scan camera. The feasibility of horizontal imaging from a synchronized hyperspectral …

Effects Of Bonding Pressure And Lamina Thickness On Mechanical Properties Of Clt Composed Of Southern Yellow Pine, Cody S. Bates

Theses and Dissertations

This study produced cross-laminated timber panels at a range of four lamina thickness (5/8, 1, 1 1/8, and 1 1/4 inch) and three bonding pressures (50, 125, 200 psi), producing a total of 12 panels for mechanical testing. The goal of this study is to observe how the thickness and pressure trends affect the mechanical properties of CLT. Tests include flatwise bending, flatwise shear, internal-bond, and delamination. Results showed that bending MOE decreases as the panel thickness increases while bonding pressure had no significance. Bending MOR was less significant for the thickness and more significant for pressure compared to the …

Field Durability Test Of Clt Wall Envelope Using Physical Barriers Against Termites And Structural Performance Of Nailed Hold-Down Brackets Connected To Fungus-Exposed Clt Walls, Kamal Neupane

Theses and Dissertations

The effectiveness of using commercial polyethylene flashing and stainless-steel mesh in CLT wall systems as the termite barriers were evaluated in a short-term field test. American Wood Protection Association (AWPA) E21's visual ratings ranged from 10 to 9 in the specimens showing little damage when no physical barriers were used. Termites were able to crawl beyond the physical barriers in few specimens showing the necessity of further research on height and installation method of physical barriers. On the second part, the effect of decay caused due to Postia placenta, a brown-rot fungus, on the structural performance of hold-down brackets connected …

Additive Manufacturing Of Soil Using Bio-Cementation, Christina Childress

Graduate Theses and Dissertations

Microbially Induced Calcite Precipitation (MICP) is an emerging soil treatment technique that is proven to increase strength, decrease erosion, reduce liquefaction risk, enhance slope stability, decrease compressibility, decrease swelling potential, and overall create a more competent soil. The benefits and applications of MICP are broad, and this research seeks to broaden them further by developing a single-phase additive manufacturing application with no treatment time delay. This is done by analyzing layering behaviors of five USCS soil classifications (100 % Ottawa sand, sand clay mixtures, and 100% lean clay) which provides insight into process variables such as the solution volume and …

Shear Strength Of Concrete Beams Made With Belitic Calcium Sulfoaluminate Cement, Caleb W. Chesnut

Graduate Theses and Dissertations

The need for a cleaner alternative to portland cement (PC) concrete has led to increasing interest in alternatives to PC. Structural properties of most of these alternative cements are still an open research topic. One promising alternative cement is belitic calcium sulfoaluminate (BCSA) cement. The study presented in this paper investigated the shear strength, long term compressive strength, and carbonation in BCSA cement and PC concrete beams. A total of twelve eight-foot long beams were made; eight BCSA cement concrete beams and four PC concrete beams to be tested at various ages depending on cement type. Two beams of each …

Improve The Prediction Of Camber, Deflection, And Prestress Losses In Precast, Prestressed Concrete Bridge Girders, Ahmed Ali Hussein Al Mohammedi

Graduate Theses and Dissertations

Many precast, prestressed concrete girders have camber less or higher than the design values. This discrepancy between the design and the actual camber creates construction problems when installing the cast-in-place concrete deck. The objective of this research was to improve the accuracy of estimating long-term camber, deflection, and prestress losses of precast, prestressed concrete girders.

The experimental program consisted of measuring concrete properties and performing field measurements of camber, deflection, and prestress losses for girders in Arkansas. The investigation involved testing nine full-scale girders from two prestressed concrete plants that regularly supply concrete girders to bridge projects in Arkansas. The …

Relating The Dongre Workability Test To Cold In-Place Recycled Asphalt Pavements, Gus Williams

Civil Engineering Undergraduate Honors Theses

The Dongre Workability Test (DWT) is a test for determining an asphalt pavement’s relative workability from the stress-strain curve of a sample. While the DWT has seen favorable results with warm mix and hot mix asphalt, Casillas and Braham (2020) attempted to apply this test to cold in-place recycled (CIR) asphalt pavements with limited results. This paper looked at the process of reexamining the DWT method to more favorable results with CIR samples. Phase 1 consisted of defining ten possible metrics from the stress-strain curve and applying them to samples with three different curing conditions. From these preliminary results, the …

Gaylord Produce Removal Machine, Marcus Takashi Hirose Lee, Jacob Michael Perlman, Carissa Abigail Kamm, Mark Misao Loera

Mechanical Engineering

This Final Design Review Report outlines the senior design project that began Winter Quarter of 2021 at California Polytechnic State University. Our team consists of three mechanical engineers and a general engineer, working together to design, build, and test a product for Alameda County Food Bank. The goal of the final product is to relieve volunteers and employees of tedious manual labor and increase efficiency during the removal of produce from large Gaylord containers. This document describes background research, the objectives of the project, chosen concept design, analysis and initial prototyping of said concept, the final design, and verification prototype …

Hybrid Structural Health Monitoring Using Data-Driven Modal Analysis And Model-Based Bayesian Inference., Jice Zeng

Electronic Theses and Dissertations

Civil infrastructures that are valuable assets for the public and owners must be adequately and periodically maintained to guarantee safety, continuous service, and avoid economic losses. Vibration-based structural health monitoring (VBSHM) has been a significant tool to assess the structural performance of civil infrastructures over the last decades. Challenges in VBSHM exist in two aspects: operational modal analysis (OMA) and Finite element model updating (FEMU). The former aims to extract natural frequency, damping ratio, and mode shapes using vibrational data under normal operation; the latter focuses on minimizing the discrepancies between measurements and model prediction. The main impediments to real-world …

Development And Promotion Of Mass Timber Noise Barrier For Highways, Harsh Bothra

All Theses

Highways are some of the biggest causes of noise pollution in the United States of America. To deal with the traffic noise coming from these highways, noise barriers have been erected across major highways. The goal is to reduce as much noise as possible through a sustainable solution. Unfortunately, the use of steel and concrete, commonly used materials, have undesired environmental impacts. A suggested sustainable alternative material would be mass timber. Mass timber products such as cross-laminated timber (CLT) and mass plywood panels (MPP) has attracted the attention of the construction industry in the U.S, as they are sustainable, light, …

Development Of Lambda Factors For Masonry Design With Lightweight Grout, Rumi Shrestha

All Theses

Reduction in structural mass, improvement in thermal performance, and reduction in shrinkage cracking through internal curing are some of the reasons that lightweight (LW) aggregates have been used in structures and pavements for decades. However, lightweight grout is still not permitted for use in reinforced masonry construction by the TMS 402/602-16 code. In order to realize the benefits of lightweight grout in U.S. reinforced masonry construction, a codified procedure for its use is required which must be informed by experimental testing.

This research is a pilot project directed to characterize the performance of LW grout in comparison to normal weight …

Seismic Performance Assessment Of Building Contents: Monetary Losses And Injuries, Sereen Majdalaweyh

All Dissertations

Building contents include all the components that are not attached to the building which the owners place after the construction phase, such as furniture, electrical equipment, glassware, and other personal items. Loss and damage assessment of building contents proved to be challenging in performance-based earthquake engineering frameworks because of the data sparsity. Damages to building contents during an earthquake not only cause monetary losses; tumbling and over-toppling of heavy building contents could result in injuries and even deaths of occupants. While major advancements have been made in performance-based earthquake engineering; however, the focus is mainly on damages and collapse risk …

Connected And Automated Vehicles: Their Implication On Capacity Of A Basic Freeway Section And Impacts On Walkway Safety, Sia Macmillan Lyimo

Dissertations

Autonomous vehicles have recently gained the attention of researchers due to their expected potential benefits on highway traffic streams, such as improving roadway capacity, among others. It is imperative to investigate how these expected benefits can be leveraged in the transportation sector. Understanding the safety and operational benefits helps the concerned transportation agencies and other key stakeholders to make necessary infrastructural and policy adjustments to accommodate such future traffic operation changes. The main goal of this dissertation is to study the impact of connected and automated vehicles on freeway capacity. The simulated environment was created to emulate autonomous vehicle behaviors, …

Naturally Occurring Van Der Waals Heterostructure Lengenbachite With Strong In-Plane Structural And Optical Anisotropy, Arindam Dasgupta, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Lengenbachite is a naturally occurring layered mineral formed with alternating stacks of two constituent PbS-like and M₂S₃-like two-dimensional (2D) material layers due to the phase segregation process during the formation. Here, we demonstrate to achieve van der Waals (vdW) heterostructures of lengenbachite down to a few layer-pair thickness by mechanical exfoliation of bulk lengenbachite mineral. The incommensurability between the constituent isotropic 2D material layers makes the formed vdW heterostructure exhibit strong in-plane structural anisotropy, which leads to highly anisotropic optical responses in lengenbachite thin flakes, including anisotropic Raman scattering, linear dichroism, and anisotropic third-harmonic generation. Moreover, …

Cyber Physical Systems For Non-Contact Infrastructure Monitoring, Roya Nasimi

Civil Engineering ETDs

In recent decades, the decay of infrastructure has become a relevant challenge of both developed and under developing countries. Prioritization of maintenance and repairs of transportation infrastructure is a new worldwide priority since it is important to quantify the rate of decay of assets to increase both safety and cost-efficient operations. Infrastructure owners need frequent inspections on their assets to predict and to avoid unsafe conditions prone to cause disasters. Frequent infrastructure inspections call for cost-effective methods. Traditional measurement methods require human access to the infrastructure, are subjective, expensive, and unsafe. Therefore, infrastructure managers are interested in exploring new non-contact …

Assessing The Vertical Displacement Of The Grand Ethiopian Renaissance Dam During Its Filling Using Dinsar Technology And Its Potential Acute Consequences On The Downstream Countries, Hesham El-Askary, Amr Fawzy, Rejoice Thomas, Wenzhao Li, Nicholas Lahaye, Erik Linstead, Thomas Piechota, Daniele Struppa, Mohamed Abdelaty Sayed

Mathematics, Physics, and Computer Science Faculty Articles and Research

The Grand Ethiopian Renaissance Dam (GERD), formerly known as the Millennium Dam, is currently under construction and has been filling at a fast rate without sufficient known analysis on possible impacts on the body of the structure. The filling of GERD not only has an impact on the Blue Nile Basin hydrology, water storage and flow but also poses massive risks in case of collapse. Rosaries Dam located in Sudan at only 116 km downstream of GERD, along with the 20 million Sudanese benefiting from that dam, would be seriously threatened in case of the collapse of GERD. In this …

Faster Post-Earthquake Damage Assessment Based On 1d Convolutional Neural Networks, Xinzhe Yuan, Dustin Tanksley, Liujun Li, Haibin Zhang, Genda Chen, Donald C. Wunsch

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Contemporary deep learning approaches for post-earthquake damage assessments based on 2D convolutional neural networks (CNNs) require encoding of ground motion records to transform their inherent 1D time series to 2D images, thus requiring high computing time and resources. This study develops a 1D CNN model to avoid the costly 2D image encoding. The 1D CNN model is compared with a 2D CNN model with wavelet transform encoding and a feedforward neural network (FNN) model to evaluate prediction performance and computational efficiency. A case study of a benchmark reinforced concrete (r/c) building indicated that the 1D CNN model achieved a prediction …

Machine Learning For High-Fidelity Prediction Of Cement Hydration Kinetics In Blended Systems, Rachel Cook, Taihao Han, Alaina Childers, Cambria Ryckman, Kamal Khayat, Hongyan Ma, Jie Huang, Aditya Kumar

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The production of ordinary Portland cement (OPC), the most broadly utilized man-made material, has been scrutinized due to its contributions to global anthropogenic CO₂ emissions. Thus -- to mitigate CO₂ emissions -- mineral additives have been promulgated as partial replacements for OPC. However, additives -- depending on their physiochemical characteristics -- can exert varying effects on OPC's hydration kinetics. Therefore -- in regards to more complex systems -- it is infeasible for semi-empirical kinetic models to reveal the underlying nonlinear composition-property (i.e., reactivity) relationships. In the past decade or so, machine learning (ML) has arisen as a promising, …

Semi-Annual Progress Report #9, Missouri University Of Science And Technology. Inspire - University Transportation Center

Semi-Annual Progress Reports

No abstract provided.

Three-Dimensional Printing Of Reinforced Concrete And Nozzle Therefor, Chenglin Wu, Genda Chen, Dimitri Feys, Guirong Grace Yan, Bryce Tyler Tafolla

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A three-dimensional printing system for reinforced concrete and a nozzle therefor. The system employs an extruder for extruding unreinforced concrete and a concrete reinforcement feeder is for feeding one or more elongate reinforcement members. The nozzle has an outlet and is operatively connected to the extruder and the concrete reinforcement feeder to receive the unreinforced concrete from the extruder and to receive the one or more elongate reinforcement members from the concrete reinforcement feeder. The nozzle combines the unreinforced concrete from the extruder and the one or more elongate reinforcement members from the concrete reinforcement feeder into a reinforced concrete …

Effects Of Fiber Clustering On Fatigue Behavior Of Steel Fiber Reinforced Concrete Beams, Danying Gao, Zhiqiang Gu, Congjie Wei, Chenglin Wu, Yuyang Pang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper investigated the effects of fiber clustering on fatigue behavior of steel-fiber-reinforced concrete (SFRC) beams with reinforcements by experimental and numerical analysis. The steel fiber volume fractions of beams were 0 vol%, 0.5 vol%, 1.0 vol%, and 1.5 vol%. One beam was tested under static loading, and eight beams under fatigue loading with different stress levels. Moreover, the fiber distribution in the cross section of concrete was experimentally characterized to understand the underlying mechanism. The results indicated that the fatigue life of beam increased with increasing fiber volume fraction from 0 to 1.0 vol% and decreased from 1.0 vol% …

3d Printed Concrete & Polymer Concrete For Infrastructure Applications, Daniel Heras Murcia

Civil Engineering ETDs

Additive manufacturing technology has been established as one of the fastest-growing building technologies worldwide. Three-dimensional concrete printing (3DCP) has developed an increasing interest in the last decade due to its prospects as a transformative technology for industries such as the concrete precast. Besides the improvements in automation technologies in construction, traditional construction has faced considerable challenges: high accident rates, labor dependency, significant potential for automation, and high costs associated with the use of traditional formwork. In this context, three-dimensional concrete, also referred to as physical prototyping, is a novel construction technique in which the concrete is extruded layer-to-layer. 3DCP is …

Image-Based Bridge Defect Detection And Monitoring Technologies, Jian Zhang

INSPIRE Archived Webinars

Computer-vision is an emerging technology which has been widely used in the field of structural health monitoring. This seminar will cover the latest achievements of our research group in defect detection, health monitoring, and construction control using image-based technologies. For defect detection, advanced unmanned aerial vehicles (UAVs) have been developed to automatically detect surface cracks and other types of structural damages based on digital image processing techniques. An integrated navigation system combining binocular camera and inertial sensor enables automated route planning for the developed UAVs in case of GPS failure. Specifically, a wall-climbing UAV is designed to acquire detailed surface …