Civil and Environmental Engineering Commons^™

Final Report - Climbing Robots With Automated Deployments Of Sensors And Nde Devices For Steel Bridge Inspection, Hung La, Son Nguyen

Project AS-2

Automated solutions for infrastructure inspection are desirable. However, arduous engineering is delaying our progress. A complete system needs to deal with three main problems: (1) locomotive performance for high complexity of steel bridges including differential curvatures, transitions between beams and obstacles; (2) data collection capability, inclusive of visible and invisible damages, in-depth information such as vibration, coat, and material thickness, etc.; and (3) working condition made up of gust wind. To have such a complete system, this technical report presents novel developments in inspection-climbing robots. Four different robot versions are designed to look for the simplest and most effective configuration …

A Review Of Current Construction Guidelines To Inform The Design Of Rammed Earth Houses In Seismically Active Zones, David Thompson, Charles Augarde, Juan Pablo Osorio

Articles

Sustainability in the materials we use for construction is a prime concern, focusing on reducing the embodied energy and carbon footprints of the materials used. The cement used in concrete products is responsible for a significant proportion of Man's CO2 emissions and its production requires substantial energy input, as do fired clay products. For this reason, products formed from unfired earthen materials are of increasing interest and the current challenges include devising means of robust design for strength and to address durability concerns. One form of earthen construction that employs an in-situ method is rammed earth, and it is a …

Experimental And Numerical Investigation Of 3d-Printed Viscoelastic Dampers, Mohammed Jaradat

Civil Engineering ETDs

Elastomeric materials are extensively used in energy dissipation applications to mitigate large lateral displacements and attenuate vibrations. One way of exploiting the capabilities of elastomeric materials is using shear-damping mechanisms such as viscoelastic damping devices (VEDs).

In this research the freedom of design offered by additive manufacturing technology is utilized to produce 3D printed elastomeric parts that act as the viscoelastic layer in an energy damping device. A mechanically interlocked viscoelastic damper (MIVED) with a jigsaw-like interlocking mechanism was designed and manufactured. MIVED is composed of a rigid and soft phase. It operates in two modes, modes I and II, …

Enhancing The Performance Of Dowel Type Fasteners And A Case Study Of Timber Truss Failure, Lon A. Yeary

Theses and Dissertations

This document will outline the findings of three separate and independent studies: Study 1: In or around 1972, an experimental building was constructed. One of the intents of the construction project was to demonstrate advancements in wood building construction design. It was value-engineered throughout. That is, its materials and systems were intended to function at or near design capacity. In 2019, part of the roof of the structure collapsed. This case study investigates two potential factors that led to the failure: stress concentration in excess of the 12 allowable stress for 2 × 4 web members and insufficient plywood sheathing …

The Living Breakwaters Pdr Efforts: Conceptual Scheduling, Calvin O. Walters Jr.

Publications and Research

On October 29, 2012, Superstorm Sandy caused nearly $19 billion in damages in New York City including 69,000 residential units across the five boroughs. This disaster precipitated a post-disaster-rebuilding (PDR) project including roughly $4.2 billion in a Community Development Block Grant allocated towards PDR projects. A portion of the grant was used to construct a living breakwater in Tottenville, Staten Island, consisting of a resiliency approach to risk reduction through erosion prevention, wave energy attenuation, and enhancement of ecosystems and social resiliency to improve resistance to storms for the community of Tottenville. The ridges of each breakwater are designed with …

Structural Design For Fire Conditions Of A Prototype Metal Building Using The New Proposed Appendix To Aisi S100, Xia Yan, Thomas Gernay

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

Performance-based design for fire conditions has been increasingly adopted for different structural systems over the last decade. The objective of this project is to exemplify through a case study how the newly proposed Appendix 4 to AISI S100 [1] on ‘Structural Design for Fire Conditions’ could be used by the metal building industry. The scope of work on the project includes the following:

(1) Identification of a prototype metal building to serve as an exemplar case study for the structural fire design procedure.

(2) Definition of the performance objectives and design requirements for the building in the fire situation. This …

Port Infrastructure Resilience Through Combined Wind-Surge Demand Characterization, Kaley Callaway

Graduate Theses and Dissertations

The United States economy is reliant on maritime transportation for 70% of imports and exports. Structures that are integral to the operation of ports, such as cranes, are jeopardized when tropical storms approach land. While wind is the only environmental load used to design dockside container cranes, storm surge often accompanies severe wind events and can create large structural loads. This study focuses on determining coupled storm-surge demands and the effect of waves on dockside container cranes. A damage index prediction tool that considers both maximum wind speed and storm surge height is developed and applied to historical hurricane data …

Refining Particle Size Specification For Asphalt Emulsion, Pedro Luis Diaz Romero

Graduate Theses and Dissertations

Pavements begin to deteriorate as soon as they are constructed, and traffic is released. The rate at which a pavement deteriorates depends on the material quality, the environment, and the loads carried. To properly preserve pavements and extend their life, various pavement preservation treatments are used. For flexible pavements, a considerable number of these treatments use asphalt emulsion (which are refer to simply emulsions from here on). Emulsions are classified based on their particle charge and reactivity. Emulsions used in chip seals are usually of rapid set reactivity and are classified based on tests over fifty years old.

It has …

Cyclic Behavior Of Laterally Skewed Special Moment Frame Connections: Experimental Testing And System-Level Analyses, Mohammad Hossein Kashefizadeh

Graduate Theses and Dissertations

Special moment frames (SMFs) are frequently used in high seismic areas for architecturally constrained designs. SMFs provide lateral system stiffness without the use of braces that often obstruct views and architectural features. Current American Institute of Steel Construction (ASIC) provisions (AISC 341-16) provide prequalified SMF connection details; however, all prequalified details only consider orthogonal connections between the beam and column. This dissertation investigates the effect of adding skew within SMF beam-to-column connections. The study presented herein involves system-level dynamic time-history analyses of skewed SMF connections, the analytical component-level investigation into the effect of the concrete slab on behavior of the …

Validation Of Cfd Tornado Pressure On Building And Wind Field With Ttu Vortex Chamber Measurements, Sumit Verma

Graduate Theses and Dissertations

Structural failure of low-rise buildings is the root cause of higher number of casualties, death tolls and economic losses at the place of occurrence of tornadoes. Proper design of low-rise buildings in tornado-prone areas require accurate estimation of tornado-induced wind loads; however, exhaustive research to estimate the wind loads reliably on buildings during tornadic events is still lacking. Several studies have been carried out to investigate the magnitude of forces induced by tornado winds on buildings from experimental as well as computational side. However, the wind pressures obtained on the building from different experimental studies have shown significant variation from …

Analyzing Vulnerabilities In The Northwest Arkansas Highway Network Using Mathematical Optimization, Brandon Jerome

Industrial Engineering Undergraduate Honors Theses

The highway and bridge network is a critical infrastructure that allows for the free transportation of citizens and enables truck-borne freight transportation. Disruption of this system could be caused by a terrorist attack, natural disaster, growth of population, required repairs and upgrades, or collapse caused by old age or malfunction. In the event of a disruption cities and regions can experience increased traffic and supply chain shortages, thus causing cascading effects throughout surrounding areas. With this motivation, we develop a network interdiction optimization model to identify a limited subset of roads that, if disrupted, causes the greatest increase in the …

Wave Interactions And Energy Cascade, Bailey Downing

Civil Engineering Undergraduate Honors Theses

Structural engineers design buildings and their components to withstand code-specified wind loads. The ASCE 7-16 manual sets the standards for calculating wind loads in the U.S. Depending on the velocity of wind, deflections may occur as wind passes through the building. The pressure reported from ASCE are based on wind tunnel measurements. The peak pressure from ASCE 7 is much less than what is measured from the field for a low-rise building. As an alternative economic tool, Computer modeling has been developed to help with this dilemma. Methods based on computational fluid dynamics (CFD) are used to calculate velocities and …

Strain Measurements In Skewed Reduced Beam Section Special Moment Frame Connections, Elizabeth Moriconi

Civil Engineering Undergraduate Honors Theses

A series of experimental tests were conducted in the Civil Engineering Research and Education Center (CEREC) at the University of Arkansas to evaluate the effect of beam skew on a reduced beam section. Various degrees of skew on deep and shallow column depths were tested following a cyclical loading protocol, established by the AISC Seismic Provisions, to analyze the capacity of the out-of-plane skew connection [1]. Using the prequalified cyclical loading protocol allows for the evaluation of SMF connections in skew configurations against seismic events. Strain distributions throughout the RBS section, the welded beam-column connection, and the column flange were …

Strain-Based Design Of Steel-Polymer-Steel Composite Pipes, Vul Thang

LSU New Orleans Theses and Dissertations

Many offshore single-wall pipelines and structural failures have occurred in the past. As a result, lives were lost, and billions of dollars were spent. In addition, natural disasters such as earthquake fault zones can cause a large volume of soil movement. This can easily damage single-wall pipelines or piles of fixed offshore platforms in the earthquake fault zone.

Currently, the single-wall pipelines are used for the offshore and onshore oil and gas industry. This research investigated the use of double-wall composite pipe steel-polymer-steel (SPS) in place of single-wall pipe to prevent such failures. The double-wall composite pipe has a larger …

Comparing The Stiffness Of Cold In-Place Recycled Asphalt Pavement To Hot Mix Asphalt: Determining The Reproducibility Of The Stiffness Rebound Test, Tanner Turben

Civil Engineering Undergraduate Honors Theses

The Stiffness Raveling Mechanism Test (SRMT) was originally developed as an indirect measure of pavement stiffness to determine a pavement’s tendency to ravel, a type of damage. Regarding rehabilitation of existing roadways by Full Depth Reclamation (FDR) Cold In-Place Recycling (CIR), concern of field repeatability was expressed (Hill & Braham, 2016).

An analysis of lab-compacted samples of CIR and Hot Mix Asphalt (HMA) was performed to determine if the results could be reproduced between CIR and HMA. Additionally, the experiment observed the effects of percent air voids, temperature, and moisture conditioning on CIR and HMA. Three samples were prepared for …

Evaluating The Effects Of Curing Methods On Bcsa Cement Concrete, Hannah Allen

Civil Engineering Undergraduate Honors Theses

BCSA cement is a type of cement that makes concrete set up much quicker than typical portland cement concrete. BCSA cement concrete also has a much higher compressive strength than that of portland cement concrete. This study was conducted to determine the effect of different curing conditions on the compressive strength of BCSA cement concrete.

Semi-Annual Progress Report #10, Missouri University Of Science And Technology. Inspire - University Transportation Center

Semi-Annual Progress Reports

No abstract provided.

Mechanical Behavior Of Clay Soil Stabilized With Fly Ash And Bottom Ash, Soewignjo Agus Nugroho, Azra Zulnasari, Ferry Fatnanta, Andius Dasa Putra

Makara Journal of Technology

Soil is one of the most important aspects of an infrastructure given its functions of receiving and holding structural loads. However, not all soils have good physical and mechanical properties. To overcome those conditions, stabilization of the soil is practiced to meet the technical requirements. This study aims to determine the behavior of high plasticity clay stabilized with lime, fly ash, and bottom ash. These additives can be used as a stabilizing agent to increase soil strength. The percentage of additives varied from 5%–25% then mixed with clay and were tested through the (Unconfined Compression Strength (UCS) test. The UCS …

Enhancement Of Biogas Production Through Solid-State Anaerobic Co-Digestion Of Food Waste And Corn Cobs, Lukhi Mulia Shitophyta, Anisa Salsabila, Firanita Angraini Putri, Siti Jamilatun

Makara Journal of Technology

Although biogas has been primarily produced through liquid anaerobic digestion, this method leads to the floating and stratification of fibers and non-homogeneous mixing, which can reduce the biogas yield. Alternatively, biogas can be produced by the solid-state anaerobic digestion (SS-AD) of organic material with a high solid content, such as corn cobs. We investigated the co-digestion of food waste and corn cobs as a biomass feedstock for SS-AD in biogas production. We measured the effects of the total solid (TS) content, percentage of food waste, and reduction in volatile solids (VS), from which we determined its appropriate kinetic model. We …

Control Strategy For Solar Energy-Saving Lamps For Optimized Energy Utilization And Sustainability Of Operation Durability: Indonesia Case, Burhanuddin Halimi, Agus Purwadi, Nana Heryana

Makara Journal of Technology

To solve the electrification ratio issue, the Indonesian government has promoted the use of solar energy-saving lamps. This study proposes a control strategy that adopts current reference time-based profiling for solar energy-saving lamps. For optimal energy consumption, the current reference profile is determined according to users’ daily energy requirements. From the aspect of user comfort, a gradual step reference profile is also introduced to provide a subtle change in lighting intensity level. The proposed control strategy can minimize energy consumption and optimize the operation durability of the system. The concept is verified by simulating four scenarios, the results of which …

Structural Health Monitoring: From Virtual Shakers To Machine Learning, Ahsan Kareem

Abbett Distinguished Seminar Series

Structural health monitoring (SHM) is a critical means of assessing the performance of aging civil infrastructure. Earlier studies used heavy dynamic shakers to assess the dynamics of structures, which are unwieldy and reliance has been shifted to ambient vibration of structures to extract dynamic features. This study introduces a “virtual shaker” concept that effectively replaces the physical shaker and provides all the desired features for SHM. Examples are provided along with an App that facilitates the use of this concept to identify dynamic features. A traditional structural health monitoring (SHM) operation requires a wired system, which is often termed “hub …

Machine Learning-Based Bridge Load Posting Prediction, Sai Naga Sasi Aditya Bandaru

LSU Master's Theses

1600 (12%) of Louisiana's 13,000 bridges that allow the passage of people, goods, and services are load posted, meaning they are deemed incapable of securely carrying all legal loads. A machine learning framework for estimating the number of load-posted bridges within a regional bridge portfolio would be extremely valuable in the future for allocating essential resources during long-term planning. A framework of this type is necessary since a significant proportion of the bridges are load posted. Furthermore, deterioration due to aging and future increases in legal loads can compound this situation. In this setting, there is a lack of data-driven …

Machine Learning-Based Bridge Load Posting Prediction, Sai Naga Sasi Aditya Bandaru

LSU Master's Theses

1600 (12%) of Louisiana's 13,000 bridges that allow the passage of people, goods, and services are load posted, meaning they are deemed incapable of securely carrying all legal loads. A machine learning framework for estimating the number of load-posted bridges within a regional bridge portfolio would be extremely valuable in the future for allocating essential resources during long-term planning. A framework of this type is necessary since a significant proportion of the bridges are load posted. Furthermore, deterioration due to aging and future increases in legal loads can compound this situation. In this setting, there is a lack of data-driven …

A Case Study Of Protecting Bridges Against Overheight Vehicles, Aly Mousaad Aly, Marc Hoffmann

Faculty Publications

Most transportation departments have recognized and developed procedures to address the ever-increasing weights of trucks traveling on bridges in service today. Transportation agencies also recognize the issues with overheight vehicles’ collisions with bridges, but few stakeholders have definitive countermeasures. Bridges are becoming more vulnerable to collisions from overheight vehicles. The exact response under lateral impact force is difficult to predict. In this paper, nonlinear impact analysis shows that the degree of deformation recorded through the modeling of the unprotected vehicle-girder model provides realistic results compared to the observation from the US-61 bridge overheight vehicle impact. The predicted displacements are 0.229 …

Optimizing The Self-Healing Efficiency Of Hydrogel Encapsulated Bacteria In Concrete, Ricardo Hungria

LSU Master's Theses

Calcium carbonate precipitation through microbial means is a promising pathway for concrete self-healing technologies, mainly for its microcrack sealing attributes. The main goal of this project was to study and optimize the crack healing efficiency of hydrogel encapsulated bacteria in concrete. To achieve this purpose, Bacillus pseudiformus was implemented as the bacteria strain at a concentration of 10⁸ cells/ml. This bacterium strain along with yeast extract was combined along with three different mineral precursors corresponding to magnesium acetate, calcium lactate, and sodium lactate. All these three precursors were evaluated at two concentrations (67.76 mM/l and 75 mM/l). For each …

Cost-Efficient Bridge Scour Health Monitoring Using Commercial Sensors, Connor Embleau, Tien Yee, Metin Oguzmert, Mahyar Amirgholy, Alan Akazemi, Dale Goff

Symposium of Student Scholars

Bridge scouring has been a major international issue regarding bridge health and the overall longevity of a bridge. A common bridge health concern such as scouring accounts for close to 60% of bridge failures in the United States and is a leading cause to a bridge being in critical condition. Traditional methods to combat this failure is to measure the scour depth to assess a bridge health. Due to safety concerns of the traditional method, this study proposes to monitor a bridge’s health using a vibration-based technique. At present, vibration-based techniques have yet to be utilized reliably in the field. …

Fast Forest Fire Smoke Detection Using Mvmnet, Yaowen Hu, Jialei Zhan, Guoxiong Zhou, Aibin Chen, Weiwei Cai, Kun Guo, Yahui Hu, Liujun Li

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Forest fires are a huge ecological hazard, and smoke is an early characteristic of forest fires. Smoke is present only in a tiny region in images that are captured in the early stages of smoke occurrence or when the smoke is far from the camera. Furthermore, smoke dispersal is uneven, and the background environment is complicated and changing, thereby leading to inconspicuous pixel-based features that complicate smoke detection. In this paper, we propose a detection method called multioriented detection based on a value conversion-attention mechanism module and Mixed-NMS (MVMNet). First, a multioriented detection method is proposed. In contrast to traditional …

Reducing Early-Age Shrinkage Cracks Of Bridge Decks And Rails, Soumitra Das, George Morcous, Jiong Hu

UNL Student Research Days Posters, Graduate

Early-age shrinkage cracking of concrete bridge decks and rails accelerates the penetration of water and chemicals which leads to reinforcement corrosion, delamination, and eventually spalling. All this results in shorter service life, road closure, and costly repair. Development of Low-cement concrete(LCC) mix to reduce early age shrinkage crack through aggregate grading optimization was done in this research work. This approach also reduces concrete cost ($15-$20/cyd) (15–25%) and its carbon footprint (≈15%).

Evaluating The Effects Of Shored Construction On Steel Girder Composite Bridges, Parker Brooks

Doctoral Dissertations and Master's Theses

Steel composite girder bridges provide economic advantages and higher load-carrying capacity than non-composite alternatives. Over the years, a conventional sequence of un-shored construction for steel girder composite bridges has been developed. There is an alternative construction sequence, known as shored construction, that uses temporary supports (discretely or fully supported) for the superstructure during the installation of metal forms and the pouring of concrete. Shored construction also can be used in an Accelerated Bridge Construction (ABC) practice where construction occurs at a nearby site and fully-formed elements are transported to the final site using self-propelled modular transporters (SPMTs). In order to …

Monitoring Of Structural Quality Under Construction Using 3d Point Cloud Data, Xinxing Yuan

Civil Engineering ETDs

Inspection of infrastructure under construction has become an active research topic in the past few decades. Due to rising costs and safety concerns of current inspection methods, automated inspection methods are proposed. In this context, this dissertation has developed a framework that uses 3D point cloud data from the bridge under construction and evaluates the design specifications and the strength capacity of the structure while is being built. This study presents a slicing algorithm for automatically evaluating rebar placement using 3D point cloud data. The outcomes of this research provide structural engineering with (i) automatic inspection of reinforcement during construction; …