Civil and Environmental Engineering Commons^™

Lane Changing Control To Reduce Traffic Load Effect On Long-Span Bridges, Colin C. Caprani, Bernard Enright, Colm Carey

Conference papers

Long span bridges are critical parts of a nation’s infrastructure network and congested traffic loading is the governing form of traffic loading. Groups of trucks travelling in conveys are created when fast-er moving vehicles, such as cars, change lane. In this research the authors investigate how the control of these lane-changing events can help reduce the traffic load effects on long span bridges. Real traffic data is used to simulate a traffic stream on a virtual road and bridge using a microsimulation model. Various lane-changing restrictions are examined and compared to the typical case of free lane changing. It is …

Estimation Of Lifetime Maximum Distributions Of Bridge Traffic Load Effects, Eugene J. Obrien, Donya Hajializadeh, Emma Sheils, Bernard Enright

Conference papers

This paper considers the problem of assessing traffic loading on road bridges. A database of European WIM data is used to determine accurate annual maximum distributions of load effect. These in turn are used to find the probability of failure for a number of load effects. Using the probability of failure as the benchmark, traditional measures of safety – factor of safety and reliability index – are reviewed. Both are found to give inconsistent results, i.e., a given factor of safety or reliability index actually corresponds to a range of different probabilities of failure.

Optimisation Of Cold-Formed Steel Purlin Cross-Sections, Matt Clifford

Theses

The subject of buckling of steel members is introduced and the critical nature of local buckling in slender members is highlighted.

The main thrust of work this semester is an investigation into the following buckling modes:

Flexural buckling;

Lateral torsional buckling;

Torsional buckling;

Shear buckling;

Web buckling;

Distortional buckling;

Local buckling.

This investigation has three main components:

1. Review of theory, books and appropriate published work;

2. Investigation into the relevant parts of Eurocode 3;

3. Finite element analysis using the LUSAS FE program to illustrate the various buckling modes.

Finally, the areas to be covered in the Realisation Stage …

Effects Of Cyclic Loading On Offshore Foundation Systems, Shane Browne

Theses

A brief description of the various offshore foundation systems currently available is provided in this report, including the advantages and disadvantages for each system and water depth in which they can be used. These foundation types include floating structures, jacket structures, gravity base structures and the monopile foundation, on which this research specifically focuses.

The monotonic lateral loading of the monopile structure is also examined and the reasons why monotonic testing is required are highlighted, along with the potential analysis that can be generated to improve the design of the monopile foundation. A review of previous test programmes for monopiles …

An Empirical Study Of Particulate Matter Exposure For Transit Users At Bus Stop Shelters, Adam Moore

Dissertations and Theses

Congested traffic corridors in dense urban areas are key contributors to the degradation of urban air quality. While waiting at bus stops, transit patrons may be exposed to greater amounts of vehicle-based pollution, including particulate matter, due to their proximity to the roadway. Current guidelines for the location and design of bus stops do not take into account air quality or exposure considerations. This thesis provides a unique contribution to roadside air quality studies and presents an innovative method for the consideration of bus shelter placement. Exposure to roadside pollutants is estimated for transit riders waiting at three-sided bus stop …

Flexural Behavior Of Laterally Damaged Full-Scale Bridge Girders Through The Use Of Carbon Fiber Reinforced Polymers (Cfrp), Nicholas James Alteri

UNF Graduate Theses and Dissertations

ABSTRACT

The repair and strengthening of concrete bridge members with CFRP has become increasingly popular over recent years. However, significant research is still needed in order to develop more robust guidelines and specifications. The research project aims to assist with improving design procedures for damaged concrete members with the use of CFRP.

This document summarizes the analysis and testing of full-scale 40’ foot long prestressed concrete (PSC) bridge girders exposed to simulated impact damage and repaired with carbon fiber reinforced polymers (CFRP) materials. A total of five AASHTO type II bridge girders fabricated in the 1960’s were taken from an …

Failure Analysis Of Impact-Damaged Metallic Poles Repaired With Fiber Reinforced Polymer Composites, Robert Arthur Slade

Electronic Theses and Dissertations

Metallic utility poles, light poles, and mast arms are intermittently damaged by vehicle collision. In many cases the vehicular impact does not cause immediate failure of the structure, but induces localized damage that may result in failure under extreme service loadings or can promote degradation and corrosion within the damaged region. Replacement of these poles is costly and often involves prolonged lane closures, service interruption, and temporary loss of functionality. Therefore, an in situ repair of these structures is required. This thesis examines the failure modes of damaged metallic poles reinforced with externally-bonded fiber reinforced polymer (FRP) composites. Several FRP …

The Structural Performance Of Timber Connections, Daniel Coleman

Theses

This thesis sets out to assess the behaviour of mechanically fastened timber-to-timber connections. The design aspects of timber connections are described in detail, with particular emphasis on nailed connections. The effects of inherent variations in timber properties on joint behaviour are also described.

The two types of connections considered were:

■ Corbel (cantilever);

■ Splice.

For each connection type, different nail configurations, nail diameters and shaft lengths were used. Testing undertaken was conducted to investigate the influence of a number of nail configurations on a connection’s initial stiffness. The test results, presented using moment- rotation curves are also used to …

Developments In Performance Monitoring Of Concrete Exposed To Extreme Environments., W. J. Mccarter, T. M. Chrisp, G. Starrs, A. Adamson, E. Owens, P. A. M. Basheer, S. V. Nanukuttan, S. Srinivasan, Niall Holmes

Articles

The performance of the surface zone of concrete is acknowledged as a major factor governing the rate of deterioration of reinforced concrete structures because it provides the only barrier to the ingress of water containing dissolved ionic species such as chlorides, which ultimately initiate corrosion of the reinforcement. In situ monitoring of cover-zone concrete is therefore critical in attempting to make realistic predictions as to the in-service performance of the structure. To this end, this paper presents developments in a remote interrogation system to allow for continuous, real-time monitoring of the cover-zone concrete from an office setting. Use is made …

Development Of Self-Stressing System For Bridge Application With Emphasis On Precast Panel Deck System, Marcelo Ferreira Da Silva

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Steel girder bridges often utilize continuity over the pier to reduce interior forces on the spans. In continuous structures with composite concrete decks, the location of maximum negative bending moment is over the interior supports. This moment produces tensile stresses in the concrete deck and compressive stress in the bottom flanges of the girders. The tensile stress in the deck leads to cracking which allow intrusion of moisture and road salt, causing corrosion of the reinforcement and supporting girders. Continued maintenance is required to forestall the deterioration; however, replacement of the deck is eventually required.

To overcome this problem, a …

Development Of A Design Procedure For Concrete Traffic Barrier Attachments To Bridge Decks Utilizing Epoxy Concrete Anchors, Benjamin J. Dickey

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

A guide for the design of epoxy anchors for the use in concrete traffic barriers was developed in this study. A series of dynamic bogie tests and static tests was conducted on single and double anchors. The dynamic increase factor for the noted anchors was determined to be 1.06. Protective epoxy coatings for the anchors was observed to contribute to a 9 percent decrease in anchorage strength. The effects of anchors located in close proximity to each other was also investigated. Calibration factors were developed to apply recommended changes to the ACI code for use in bridge rail anchorages.

A …

Expanding The Length Of Jointless Bridges By Providing Rotational Capacity Over The Pile Head, Ardalan Sherafati

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Jointless bridges have been in service for more than 50 years. Since no expansion joint is utilized in these structures, they have longer service life, reduced maintenance and construction costs, improved riding quality, and added redundancy. Because of integrity of the superstructure with the substructure, the thermal movements as well as other longitudinal movements are transferred to substructure. These lateral movements can induce relatively large forces and moments in the substructure elements including the abutment and the piles. Typically, flexible foundations which include single row of piles are preferred in jointless bridges to reduce the stiffness of the system against …

Wim Based Load Models For Bridge Serviceability Limit States, Przemyslaw Rakoczy

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The safety of aging bridge inventory is one of the main concerns of the state and federal agencies. Therefore, there is a need to quantify the safety margin of existing infrastructure and new design bridges. The Serviceability Limit States, i.e. fatigue, requires additional statistical parameters and not only the maximum values but also load spectra, i.e. frequency of occurrence of loads. The maximum values are needed for shorter time periods, such as day, week, month or year. Load spectra as well as material resistance are random variables. To quantify the safety margin of existing and future bridges load and resistance …

Flexible Connection Elastomeric Rubber As A Pounding Resisting Element Between Two Adjacent Buildings, Yuskar Lase, James Jatmiko Oetomo

Makara Journal of Technology

Flexible Connection Elastomeric Rubber as a Pounding Resisting Element between Two Adjacent Buildings To solve pounding problem of two adjacent buildings, structural designer usually employs a dilatation between the structures or make the two structures as a monolith structure. Other alternative is by using an elastomeric rubber as a pounding resisting element between the two structures. Effectiveness in applying elastomeric rubber component as flexible connection of two adjacent structures is the main focus of this paper. Various simulations such as structure models, earthquake excitations and openings in gap element are studied. Observation of maximum structural responses will be performed for …

Improvement Of High Temperature Oxidation Of Low Carbon Steel Exposed To Ethanol Combustion Product At 700 °C By Hot-Dip Aluminizing Coating, Mohammad Badaruddin

Makara Journal of Technology

Low carbon steel (AISI 1005) was coated by hot-dipping into a molten Al-10% Si bath at 700 °C for 18s. After hotdipping treatment, the coating layers consisted of Al, Si, FeAl3, τ5-Fe2Al8Si, and Fe2Al5. The bare steel and the aluminized steel were isothermally oxidized at 700 °C in ethanol combustion product at atmospheric pressure for 49 h. The aluminized steel shows good performance in high temperature oxidation because the formation of Al2O3 layer on the coating surface. The growth of iron oxide nodules on the surface coating was accelerated by rapid outward diffusion of Fe-ions due to the presence of …

Effect Of Copper Addition On Mechanical Properties And Electrical Conductivity Of Pp/C-Cu Bipolar Plate Composites, Anne Zulfia, Taufik Abimanyu, Verina Warga Dalam

Makara Journal of Technology

Effect of Copper Addition on Mechanical Properties and Electrical Conductivity of PP/C-Cu Bipolar Plate Composites. Bipolar plate is a major component in PEM fuel cell which possess main function of collecting and removing electrons from anode to cathode. Therefore, materials for bipolar plates produced must have high electrical conductivity. To obtain bipolar plate materials which is cheap, lightweight and high conductivity, so it is developed bipolar plates material based on PP/C-Cu composite. PP/C-Cu composites has been made by mixing all materials then compounding, rheomix, hot blending and hot press. Cu (Copper) has been used various from 0.1 wt%, 1 wt% …

Application Of Principal Component Proximity Transform And Geostatistics Methods For Volume Shale Distribution As Reservoir Characreristic Imaging In Seismic 3d, Nur Islami

Makara Journal of Technology

Application of Principal Component Proximity Transform and Geostatistics Methods for Volume Shale Distribution as Reservoir Characreristic Imaging in Seismic 3D. Principal component proximity transform (PCPT) technique was used to predict the content of volume shale into seismic data in reservoir modeling framework. The goal in this research is to get the volume shale imaging in three dimensions and allow for reservoir modelling. The reservoir modelling requires an integrated quantitative and qualitative data sources collected separately, such as well and seismic data. Integrating PCPT and Geostatistic methods can generate the detail information for characterization of reservoir’s properties. Finally, it shows that …

Application Of Empirical Orthogonal Function Models To Analyze Shoreline Change At Bangkalan Madura, Darius Arkwright, Suntoyo Suntoyo

Makara Journal of Technology

Bangkalan’s shoreline, especially on the opposite side of Surabaya, has been evaluated to determine the morphological changes due to wave attack, near-shore current, long-shore sediment transport and coastal configuration. This research aims to determine the dominant patterns of variation of Bangkalan’s shoreline change, expressed by Eigen-function in empirical orthogonal function (EOF) models. That was started with data collection such as oceanographic data (wave and tidal), bathymetry and topographic map and sediment data. All data was used for forecasting two-monthly shoreline. Coordinate of two-monthly shoreline was used as input of EOF model. The first Eigen mode is a profile of shoreline …

Establishment Code Hand Palm (Palm Code) 2d Gabor-Based Method, I Ketut Gede Darma Putra, Wira Bhuana, Erdiawan Erdiawan

Makara Journal of Technology

Establishment Code Hand Palm (Palm Code) 2D Gabor-Based Method. Palmprint is relatively new in physiological biometrics. Palmprint ROI segmentation and feature extraction are two important issues in palm print recognition. This paper introduces two steps in the center of mass moment method for ROI segmentation that will be applied in the Gabor 2D filter to obtain palm code as palmprint feature vector. Normalized Hamming distance was used to measure the similarity degrees of two feature vectors of palmprint. The system was tested using database 1000 palmprint images generated from 5 samples from each of the 200 persons randomly selected with …

The Effectiveness Of Anaerobic Baffled Reactor And Rotating Biological Contactor In Batik Wastewater Treatment, Augustinus Ignatius Kristijanto, Widhi Handayani, Purwanti Asih Anna Levi

Makara Journal of Technology

Batik is one of popular arts of Indonesia. The batik industries in Sragen, Central Java, are prepared to compete in global market. In order to realize that objective, batik products should fulfill some qualifications, one of which is “environmental friendliness”. As batik production is usually generating wastewater which pollutes the environment, the technology of wastewater treatment should be developed to solve the problem. This preliminary study has been done to assess the effectiveness of anaerobic baffled reactor (ABR) and rotating biological contactor (RBC) in batik wastewater treatment. In 40 days of treatment period, the ABR performance in reducing pollutants showed …

Physical Characterization And Desulfurization Of Biobriquette Using Calcium-Based Adsorbent, Mahidin Mahidin, Asri Gani, Khairil Khairil

Makara Journal of Technology

Combustion of coal and co-combustion of their co-fuel contribute to gas emissions. Among the gas emissions are SOx, NOx, CO and CO2. Introduction of calcium based adsorbent is addressed to absorb SO2 that release to the atmosphere during the combustion process. Objective of the research is at first to observe the physical characteristics of biobriquettes as a function of briquette compositions (coal to palm kernel shell ratios) and Ca/S ratios (Ca in adsorbent and S in briquette) using a natural adsorbent (shellfish waste). The second objective is to investigate desulfurization characteristics as a function of Ca/S ratios and desulfurization temperatures …

Flutter Analysis Of Rx-420 Balistic Rocket Fin Involving Rigid Body Modes Of Rocket Structures, Novi Andria

Makara Journal of Technology

Flutter Analysis of RX-420 Balistic Rocket Fin Involving Rigid Body Modes of Rocket Structures. Flutter is a phenomenon that has brought a catastrophic failure to the flight vehicle structure. In this experiment, flutter was analyzed for its symmetric and antisymmetric configuration to understand the effect of rocket rigid modes to the fin flutter characteristic. This research was also expected to find out the safety level of RX-420 structure design. The analysis was performed using half rocket model. Fin structure used in this research was a fin which has semispan 600 mm, thickness 12 mm, chord root 700 mm, chord tip …

Analytical And Computational Simulation Approaches To Design Low Energy Glass Block, Floriberta Binarti, Agustinus Djoko Istiadji, Prasasto Satwiko, Priyo Tri Iswanto

Makara Journal of Technology

Analytical and Computational Simulation Approaches to Design Low Energy Glass Block. An environmentally friendly process was developed to produce a low embodied energy glass block from waste glasses. The energy efficiency of the glass block is represented by its thermal conductance (U)

Medium Density Fibreboard Made Of Acetylated Sludge From Paper Mill, Luthfi Hakim, Evalina Herawati, I Nyoman Jaya Wistara

Makara Journal of Technology

Medium Density Fibreboard Made of Acetylated Sludge from Paper Mill. Research of using sludge as raw material for making medium density fibreboard (MDF) was useful to create additional value of sludge. The objective of the research was to evaluate physical properties, mechanical properties, and durability of MDF from acetylated sludge in 4 levels of acetate anhydride (0%, 3%, 5%, and 7%) with 3 replicates. The MDF was made using dry process. After materials were mixed with adhesives, they were pressed using hotpress under 170 oC temperature and 45 Pa pressure for 25 minutes. The size of the MDF sample was …

Optimation Of Nitrogen And Phosphorus In Azolla Growth As Biofertilizer, Hany Handajani

Makara Journal of Technology

Nitrogen is one of the most important minerals for living organisms. Azolla is known as a small water fern which can fix nitrogen through the symbiotic association with the blue green algae Anabaena. Experimental studies were carried out in the glass house, investigating the growth of Azolla using different levels of nitrogen and phosphorus in the media. The experiment used 12 treatments with 3 levels of nitrogen (0, 5, and 10 mg atom/L) and 4 levels of phosphorus (0, 10, 20, and 30 mg atom/l) in a factorial design with 3 replicates. The results show that the highest biomass for …

Antibacterial Activity Of Papaya Leaf Extracts Against Pathogenic Bacteria, Elisa Friska Romasi, Jessica Karina, Adolf Jan Nexson Parhusip

Makara Journal of Technology

It was reported that the extracts of papaya leaves could inhibit the growth of Rhizopus stolonifer. Antibacterial activity of Carica papaya leaf extracts on pathogenic bacteria was observed in this study. Papaya leaves were extracted by using maceration method and three kinds of solvents: ethanol, ethyl acetate, and hexane. Papaya leaf extracts were tested against Bacillus stearothermophilus, Listeria monocytogenes, Pseudomonas sp., and Escherichia coli by agar diffusion method. The objectives of this study were to determine extract ability against pathogenic bacteria, to observe the influence of pH, NaCl, and heat on extracts ability, and to observe extract ability against B. …

Cassava Pulp As A Biofuel Feedstock Of An Enzymatic Hydrolysis Proces, Djuma’Ali Djuma’Ali, Nonot Soewarno, Sumarno Sumarno, Dyah Primarini, Wahono Sumaryono

Makara Journal of Technology

Cassava pulp, a low cost solid byproduct of cassava starch industry, has been proposed as a high potential ethanolic fermentation substrate due to its high residual starch level, low ash content and small particle size of the lignocellulosic fibers. As the economic feasibility depends on complete degradation of the polysaccharides to fermentable glucose, the comparative hydrolytic potential of cassava pulp by six commercial enzymes were studied. Raw cassava pulp (12% w/v, particle sizeμm) hydrolyzed by both commercial pectinolytic (1) and amylolytic (2) enzymes cocktail, yielded 70.06% DE. Hydrothermal treatment of cassava pulp enhanced its susceptibility to enzymatic cleavageas compared to …

Alos/Palsar Image Processing Using Dinsar And Log Ratio For Flood Early Detection In Jakarta Based On Land Subsidences, Dodi Sudiana, Mia Rizkinia

Makara Journal of Technology

Flood that occurred in Jakarta is not only influenced by rainfall, urban planning system and drainage alone, but also may be involved land subsidence (LS). LS is possible in because Jakarta stands on top of layers of sediments and the presence of ground water consumption in very large quantities. In this research, the Advanced Land Observing Satellite (ALOS)/Phased Array type L-band Synthetic Aperture Radar (PALSAR) data was processed to determine the level of LS in Jakarta area and its relation to flood potential area. Differential interferometry method (DInSAR) was performed on two PALSAR data with different acquisition years, i.e. 2007 …

Code Of Standard Practice For Cold-Formed Steel Structural Framing, 2011 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Effects Of Column Stiffness On Seismic Behavior Of Steel Plate Shear Walls, Xuhua Guo

Master's Theses

Steel plate shear walls (SPSWs) are a lateral force resisting system consisting of thin infill steel plates surrounded by boundary frame members. The infill steel plates are allowed to buckle in shear and subsequently form diagonal tension field actions during earthquake events. Hysteretic energy dissipation of this system is primarily achieved through yielding of the infill plates. Conceptually, in a SPSW system with ideally rigid columns pinned to ground, the infill plates at different stories will yield simultaneously as a result of the lateral loads. However, when the columns become flexible, infill plate yielding may initially occur at one story …