Civil and Environmental Engineering Commons^™

Processing Of Gis Data And Building Of 3d Dem Models With Fme Transformer Tools, Hebib Alili, Fadil Shehu, Shenur Muslija

UBT International Conference

The processes of processing of 2D or 3D geodetic or geo-information data by using the FME software and other software's or tools in combination and then through mathematical logics in FME building of such 3D models from original measured terrain data within transformers given by FME, could be considered as very important attempt of creating of such 3D models, exactly when we have to deal with huge data by the size of its as input data. These kind of doing of processing of data through FME software, can be considered as important issue also for resolving of other today related …

The Effects Of Recycling Asphalt Use In Terms Of Economic Growth And Environmental Improvement In Kosova, Muhamet Ahmeti, Binak Beqaj

UBT International Conference

Through this paper is analysed the possibility of recycling asphalt and reusing this in receipts of new asphalt to build road infrastructure inside urban areas and inter-urban areas, because analysing the investments that are being realized in the road infrastructure in Kosova last years, and investments that are going on, there are indicators showing economical, environmental and ….benefits of the society .

According to database of the Kosova Ministry of Transport and Telecommunication until the year 2014, the territory of Kosova has 2005.5 km of the road, 4% are highways, magisterial roads 32% and 64% regional roads, most of them …

Climate Change And Drinking Water, Muhamet Ahmeti, Ilira Abdullahu

UBT International Conference

The period June 2012 – March 2014 saw a prolonged deficit of precipitation below normal. This led to a major continental scale drought across southern Europe, and in eastern Kosova in particular. E.g. see figure 1 below for the month of December 2013, from Drought Monitoring Center for SEE. In fact December 2013 was the fifth driest month in the recorded history of Kosova. February registered the driest month in the recorded hydro-meteorological history of Kosova, since 1927 with only 2.1 mm precipitation, which expressed in Standardized Precipitation Index (SPI). The chance of getting this value in February was 1 …

Standard For Cold-Formed Steel Framing -- Prescriptive Method For One- And Two-Family Dwellings, 2015 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

A Comparison Of The Bond Behavior Of Pbo-Frcm Composites Determined By Double-Lap And Single-Lap Shear Tests, Lesley Sneed, T. D'Antino, C. Carloni, C. Pellegrino

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents the results of an investigation on the bond behavior and stress-transfer mechanism of polyparaphenylene benzo isoxazole (PBO) fiber-reinforced cementitious matrix (FRCM) composites bonded to a concrete substrate using double-lap and single-lap shear tests. Results of double-lap shear tests with different composite bonded lengths and widths are presented and compared with those from single-lap shear tests previously reported by the authors. The idealized load response developed from single-lap shear tests is found to characterize the response of the composite in double-lap shear tests, although with a few key differences. With the double-lap shear test, load redistribution among the …

Pre-Construction Rock Treatment And Soil Modification Program Using Low Mobility Grout To Mitigate Future Sinkhole Development In A 2,787.1 Square Meter (30,000 Sf) Maintenance Facility, Steven W. Shifflett

Sinkhole Conference 2015

The US Army required construction of a 2,787.1 square meters (30,000 sf) maintenance facility supported on shallow foundations at the Fort Campbell Military Installation. During the subsurface investigation a seven foot air-filled void was encountered in the bedrock within the building footprint. Electrical Resistivity Imaging (ERI) was conducted in an attempt to determine the lateral extent of the encountered void and to establish the general prevalence of karst features at the site. Due to uncertainty in the subsurface conditions, a rock treatment and soil modification program was developed which consisted of a series of targeted exploratory grout holes advanced in …

Test Standard For Joist Connectors Attached To Cold-Formed Steel Structural Framing, 2015 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Test Standard For Cold-Formed Steel Framing -- Nonstructural Interior Partition Walls With Gypsum Board, 2015 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Test Standard For Through-The-Web Punchout Cold-Formed Steel Wall Stud Bridging Connectors, 2015 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Code Of Standard Practice For Cold-Formed Steel Structural Framing, 2015 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Behavior And Strength Of Pultruded Frp I-Section Columns Including Uniaxial And Biaxial Bending, Emad M. Amin

Civil & Environmental Engineering Theses & Dissertations

This thesis presents the outcome of a study of the behavior and strength of pultruded glass fiber reinforced polymer (FRP) I-section columns including uniaxial and biaxial applied bending moments. Also included in the study is a critical assessment of ASCE-LRFD Pre-standard for pultruded FRP structures in view of the rigorous analysis presented herein. The theoretical solution is based on a system of three coupled differential equations of equilibrium combined with pinned flexural and torsional boundary conditions. Effects of induced warping due to second-order terms as well as initial out-of-straightness are accounted-for in the governing differential equations. Detailed investigations into the …

Experimental And Predicted Behavior Of Frp Beam-Columns Including Retrofitting, Ali Al-Huazy

Civil & Environmental Engineering Theses & Dissertations

This thesis presents the outcome of a theoretical and experimental study of Fiber Reinforce Polymer (FRP) beam-columns with uniaxial bending and including retrofitting. The research involved the design and fabrication of a testing apparatus which was then used for a series of beam-column tests. Three different types of beam-column cross sections were used, namely, channel section, I-section, and square tube section. Six non-retrofitted beam-columns were tested in addition to two retrofitted ones. The members were subjected to an eccentric vertical load applied through a lever arm generating gradually increasing axial load and uniaxial bending moment up to the maximum load. …

Role Of Soil Parameters On Loading Of Buried Structures, Xiao Zhang, Mark D. Bowman, Rafael R. Armendariz Briones

The Summer Undergraduate Research Fellowship (SURF) Symposium

Load rating is the process to evaluate and explore the structural capacity of bridges as much as possible within safety range. As a balance between economy and safety, proper load ratings save money and keep public safe. Knowing the contribution and interaction of each different soil parameter on the loading can significantly reduce the amount of work when load rating those structures. However, for buried structures without plans, such contribution or interaction is never known. This parametric study explores how much each soil parameter of three types of soils can affect the loading of buried structures without plans. An existing …

Straining Definitions, William Pollalis, Santiago Pujol

The Summer Undergraduate Research Fellowship (SURF) Symposium

The concept of strain is ubiquitous in engineering textbooks. It is defined early in engineering education as change in length divided by initial length, and is used to quantify deformations due to things like stresses and temperature changes. The concept itself is quite straightforward and represents homogenous materials well, but homogenous materials are rarely present in engineering design. Composite materials such reinforced concrete cannot be simply defined, as their properties are heavily influenced by their non-uniformity. For example, there are large deformations around tensile cracks in reinforced concrete, where the reinforcement withstands all the tensile stress, and little deformation in …

Seismic Vulnerability Assessment Of Low-Rise Reinforced Concrete Buildings In Kathmandu, Nepal, Prateek Pratap Shah, Santiago Pujol

The Summer Undergraduate Research Fellowship (SURF) Symposium

In seismically active cities like Kathmandu, there often exists a need to assess the seismic vulnerability of a large number of poorly designed buildings within a short period of time. Traditional analysis techniques do not work because they require building data that are either inaccurate or unavailable. One alternative to traditional analysis techniques is to use simple correlations like the Priority Index. This index uses basic building information such as floor area, column area, and wall area to estimate the seismic vulnerability of a building. Following the 2015 Nepal earthquake, 146 low-rise reinforced concrete buildings were surveyed in Kathmandu, Nepal. …

Application Of Fiscal Incentives For Development Of East Natuna Gas Field For Long-Term National Natural Gas Demand, Marwan Batubara, Widodo Wahyu Purwanto, Akhmad Fauzi

Makara Journal of Technology

East Natuna gas field, which has proven reserves of 46 trillion cubic feet, is projected to meet long-term natural gas needs. However, CO2-content of the gas reserves reaches 71%, leading to expensive development costs. This research investigates the feasibility of the field based on several fiscal incentives. Firstly, gas supply-demand until year 2040 was analyzed. Then, based on the analysis, the field was developed using high CO2 gas separation technology to produce gas of 1300 MMSCFD in 2023, 2600 MMSCFD in 2031, and 3900 MMSCFD in 2039. Finally, the economic feasibility was assessed using cash flow analysis in accordance with …

Transmission Electron Microscopy Characterization Of High-Temperatur Oxidation Of Fe-20cr-5al Alloy Prepared By Focused Ion Beam Technique, Mohammad Dani, Pudji Untoro, Teguh Yulius Surya Panca Putra, Parikin Parikin, Joachim Mayer, Arbi Dimyati

Makara Journal of Technology

The Focused Ion Beam (FIB) technique was applied for cross section preparation of the oxidized alloy for Transmission Electron Microscopy (TEM) study. Prior to preparation, the specimens of Fe-20Cr-5Al alloy sheet were oxidized in air at 1200 oC for 2 minutes, 10 minutes, 2 hours, and 100 hours. The microstructure and elemental composition of the samples were characterized using TEM equipped with an Energy Dispersive X-Ray Spectroscopy (EDX). The Electron Energy Loss Spectroscopy (EELS) was used to determine of the light elements. The TEM investigation reveals remarkable microstructure evolution of the specimens during oxidation which generally exhibit a typical multi-layer …

High Temperature Corrosion Of Aluminized Aisi 4130 Steel With The Different Composition Of Nacl/Na2so4 Deposits, Mohammad Badaruddin, Chaur Jeng Wang, Yudhistyra Saputra, Abu Khalid Rivai

Makara Journal of Technology

The high temperature corrosion of AISI 4130 steel can be increased by hot-dip aluminizing coating. The aluminized steel specimens with the deposit composition of 100/0, 30/70, 50/50, 70/30, and 0/100 (wt.%) NaCl/Na2SO4 were oxidized at 750 °C for 1-49 h periods. According to a parabolic rate constant (kp) value, the aluminized steel with deposit composition of 70/30 NaCl/Na2SO4 shows the highest kp value (3.71 × 10-11 g2cm- 4s-1), later followed by the kp value of 3.35 × 10-11 g2cm-4s-1 for 100/0 and the lowest kp value is 7.731 × 10-12 g2cm-4s-1 for 0/100. Whereas, the kp value for the aluminized …

Effects Of Supplier-Manufacturer Relationships On Supply-Chain Performance Of Manufacturing Industries In Indonesia, Rachmad Hidayat, Khisbullah Hudha, Sabarudin Akhmad

Makara Journal of Technology

The present study describes the relationships between commitment, communication, satisfaction, trust, relationship quality with suppliers, and supply-chain performance. The population of the study was manufacturing companies in Indonesia. Respondents were the chief executive officers or corporate secretaries or the designated managers involved in strategic decision making. Samples were taken by using a proportional area random sampling technique. Structural Equation Modeling (SEM) was used for analysis. Results of both direct and indirect testing of hypothesis indicated two hypotheses of positive and significant effects and nine hypotheses of positive but insignificant effects. Those hypotheses of positive and significant effects were the direct …

A New Method For Simulating Power Flow Density Focused By A Silicon Lens Antenna Irradiated With Linearly Polarized Thz Wave, Catur Apriono, Eko Tjipto Rahardjo, Norihisa Hiromoto

Makara Journal of Technology

A terahertz system uses dielectric lens antennas for focusing and collimating beams of terahertz wave radiation. Linearly polarized terahertz wave radiation has been widely applied in the terahertz system. Therefore, an accurate method for analyzing the power flow density in the dielectric lens antenna irradiated with the linearly polarized terahertz wave radiation is important to design the terahertz systems. In optics, ray-tracing method has been used to calculate the power flow density by a number density of rays. In this study, we propose a method of ray-tracing combined with Fresnel’s transmission, including transmittance and polarization of the terahertz wave radiation …

Stochastic Optimization Of Supply Chain Risk Measures –A Methodology For Improving Supply Security Of Subsidized Fuel Oil In Indonesia, Adinda Yuanita, Andi Noorsaman Sommeng, Anondho Wijonarko

Makara Journal of Technology

Monte Carlo simulation-based methods for stochastic optimization of risk measures is required to solve complex problems in supply security of subsidized fuel oil in Indonesia. In order to overcome constraints in distribution of subsidized fuel in Indonesia, which has the fourth largest population in the world—more than 250,000,000 people with 66.5% of productive population, and has more than 17,000 islands with its population centered around the nation's capital only—it is necessary to have a measurable and integrated risk analysis with monitoring system for the purpose of supply security of subsidized fuel. In consideration of this complex issue, uncertainty and probability …

Thermodynamic Analysis Of Irreversible Heat-Transformers, Niccolo` Giannetti, Arnas Arnas, Andrea Rocchetti, Kiyoshi Saito

Makara Journal of Technology

Absorption heat transformers extend the possibilities for efficient and environment-friendly energy conversion processes. Based on a general thermodynamic model of three-thermal cycles with finite thermal capacity of the heat sources, this paper is intent upon analyzing and optimizing the performance of absorption heat transformers, by including the influence of irreversibility in the analytical expression of the system efficiency. Dimensionless parameters for an overall optimization are defined and a first screening is performed to clarify their influence. Dependence on the main factors is highlighted to suggest how to change them in order to enhance the whole system performance. Under this point …

Strain Distribution And Crack Detection In Concrete Overlays With Pulse Pre-Pump Brillouin Optical Time Domain Analysis, Yi Bao, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This report is focused on the measurement of strain distributions and crack detection in unbonded and bonded pavement overlays. The main objectives of this study are: (a) to characterize the strain sensing properties of distributed fiber optic sensors with recently developed pulse pre-pump Brillouin optical time domain analysis (PPP-BOTDA), (b) to develop an installation method for real world applications, (c) to document the performance of the PPP-BOTDA technology in unbonded/bonded pavement applications, and (d) to develop a numerical model to facilitate the analysis of mechanical behavior of unbonded pavement overlay under vehicle wheel loads. A thin concrete layer can be …

Thermal Energy Storage In Building Integrated Thermal Systems: A Review. Part 2. Integration As Passive System, Dervilla Niall, Sarah Mccormack, Philip Griffiths, Luisa Cabeza, Lidia Navarro, Albert Castell, Alvaro De Grazia, Maria Brown

Articles

Energy consumption trends in residential and commercial buildings show a significant increase in recent decades. One of the key points for reducing energy consumption in buildings is to decrease the energy demand. Buildings envelopes are not just a structure they also provide protection from outdoor weather conditions always taking into account the local climate. Thermal energy storage has been used and applied to the building structure by taking advantage of sensible heat storage of materials with high thermal mass. But in recent years, researchers have focused their studies on the implementation of latent heat storage materials that if well incorporated …

Advancing Seismic Simulation Of Cold-Formed Steel Framed Buildings, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The objective of this research is to create a computationally efficient seismic analysis framework for cold-formed steel (CFS) framed-buildings supported by hysteretic nonlinear models for CFS members and screw-fastened connections. Design of CFS structures subjected to lateral seismic forces traditionally relies on the strength of subassemblies subjected to lateral loading of systems, such as strapped/sheathed shear walls and diaphragms, to provide adequate protection against collapse. Enabling performance-based seismic design of CFS buildings requires computationally efficient and accurate modeling tools that predict the nonlinear cyclic behavior of CFS buildings, the individual CFS components and connections. Such models should capture the energy …

Bridge Seismic Retrofit Measures Considering Subduction Zone Earthquakes, Peter Dusicka, Ramiro Bazaez, Sarah Knoles

Civil and Environmental Engineering Faculty Publications and Presentations

Over the years, earthquakes have exposed the vulnerability of reinforced concrete structures under seismic loads. The recent occurrence of highly devastating earthquakes near instrumented regions, e.g. 2010 Maule, Chile and 2011 Tohoku, Japan, has demonstrated the catastrophic impact of such natural force upon reinforced concrete structures. Research was conducted to investigate the effect of subduction zone earthquakes on structural damage. The study suggests that large magnitude ground motions of long duration have the potential of significantly increasing the number of inelastic excursions and consequently incur more extensive structural damage as compared to ground motions with similar elastic spectral demands but …

Interface Friction Parameters For The Mathematical Modeling Of Shell Structures With Infill, Alexander T. Bekker, Nikita Ya. Tsimbelman, Tatiana I. Chernova, Vadim D. Bruss, Ömer Bilgin

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Thin metal or reinforced concrete shells with granular infill structures are considered in this article. These structures are massive and they are used as support for the construction of berthing quays, piers, artificial islands, shore protection, and other structures of coastal infrastructure. It is more convenient to use the thin shell structures during the development of the Arctic shelf, because it is possible to install them from the ice side. In addition, it is possible to enhance the technology and install thin shells with infill on deeper solid foundation layers. A mathematical model for the stresses on a compressible foundation …

Seismic Retrofit Benefit Considering Statewide Transportation Assessment, Selamawit Tesfayesus Mehary, Peter Dusicka

Civil and Environmental Engineering Faculty Publications and Presentations

The purpose of this study was to identify and demonstrate a methodology to prioritize bridges for retrofit in the State of Oregon. Given the limited resources available, retrofitting all vulnerable bridges in the foreseeable future would not be practical. Instead, a retrofit strategy needs to be developed to prioritize the inventory and enumerate the retrofit cost. In this study, a prioritization methodology used a holistic assessment of overall roadway system to consider highway route segments, rather than individual bridges. The overall assessment was based on a cost-benefit analysis including retrofit cost, expected economic loss (with or without retrofit) and social …

Experimental Investigation Of Fiber Reinforced Concrete Beams, Karrar Ali Al-Lami

Dissertations and Theses

Shear strength of fiber reinforced concrete beams was studied in this research project. Three types of fibers were examined: hooked-end steel fiber, crimped-steel fiber, and crimped-monofilament polypropylene fibers. The experimental program included five beam specimens. Two of the beams were control specimens in which one was reinforced with minimum shear reinforcement according to ACI 318, while the other one did not have any shear reinforcement. Each one of the other three specimens was reinforced with one of the above mentioned fibers by 1% volumetric ratio. In addition to the beam specimens, three prisms were also made for each type fiber …

Power Maximization Of A Three-Phase Hydrokinetic Turbine, Matthew Carleson

Senior Theses

As Earth`s expendable resources dwindle, the need for alternative, renewable energy sources grows. Out of this need, an old favorite source is rising in popularity: small water turbines. Water-driven turbines first began as a means for turning mills and eventually evolved into massive dams that can power whole regions. This project focused on the construction of, and testing the properties of, a small pico-hydro power turbine. By using compressed air to drive the turbine, a representation of the peak power output was measured, serving as a basis for determining the value of pico-power systems in regards to the world`s current …