Civil and Environmental Engineering Commons^™

Minimum Ghg Emissions And Energy Consumption Of U.S. Pet And Polyolefin Packaging Supply Chains In A Circular Economy, Utkarsh S. Chaudhari, Abhishek Patil, Tasmin Hossain, David Watkins, Damon S. Hartley, Barbara K. Reck, Robert Handler, Anne T. Johnson, Vicki S. Thompson, David Shonnard

Michigan Tech Publications

There is a wide agreement on the urgency of transforming linear management of plastics towards a circular economy model. However, no clear pathways exist as to required recycling technologies involved and system-wide environmental impacts. This study explores such pathways in the U.S. for the most commonly used packaging plastics through a combination of mechanical and emerging advanced recycling technologies. A system optimization model aimed at minimizing environmental impacts was developed to determine optimal end-of-life (EOL) management and locations of existing and emerging U.S. recycling infrastructures. Our study includes material flows from virgin resin production through semi-manufacturing processes to existing EOL …

Fire Fossils: Biomineral Infrastructures In Untangling Climates, Tanmayee More

Masters Theses

Diatoms drift, sediments sink, wildfires generate their own weather. Lightning strikes can blast sand into glass, and microscopic organisms do the same in the cold recesses of the ocean. What alchemies and metabolisms catalyze space, time, and energy? What are the thermodynamics of infrastructure in Climate Change?

Places, materials, and beings are afterimages. Through alchemical experiments, and multi-scalar imaging, I develop simulations of wildfires, and their profound, reverberating effects. In this thesis, a glass-meets-landscape experimental process enters these obscured conditions and renders new material relations for the built environment.

An Artificial Neural Network-Based Battery Management System For Lifepo4 Batteries, Roger Painter, Ranganathan Parthasarathy, Lin Li, Irucka Embry, Lonnie Sharpe, S. Keith Hargrove

Civil and Architectural Engineering Faculty Research

We present a reduced-order battery management system (BMS) for lithium-ion cells in electric and hybrid vehicles that couples a physics-based single-particle model (SPM) derived from the Cahn–Hilliard phase-field formulation with a lumped heat-transfer model. A three-dimensional COMSOL® 5.0 simulation of a LiFePO4 particle produced voltage and temperature data across ambient temperatures (253–298 K) and discharge rates (1 C–20.5 C). Principal component analysis (PCA) reduced this dataset to five latent variables, which we then mapped to experimental voltage–temperature profiles of an A123 Systems 26650 2.3 Ah cell using a self-normalizing neural network (SNN). The resulting ROM achieves real-time prediction accuracy comparable …

Bayesian Model Updating Of Structural Parameters Using Temperature Variation Data., Ujjwal Adhikari

Electronic Theses and Dissertations

Physical digital twins have now emerged as a technology in structural health monitoring and other domains of structural modeling. A Finite Element Model can be a tool for digital twin technology in conjunction with measured physical data. Developing an accurate digital model requires the integration of various parameters to replicate the real structure; however, temperature is dynamically changing, resulting in difficulty in the identification of structural parameters. Typically, temperature is considered noise or filtered out. Limited research has addressed the physics-based model using temperature variation related to structural modal properties. Finite Element Model Updating (FEMU) is a typical inverse problem-solving …

Design And Optimization Of Aquaculture Gear: Development Of A Cage-Integrated Reeling Mechanism For Oyster Farming, Felicity Bryant

Honors Theses

This project encompasses the design, fabrication, and testing of a cage-integrated reeling system aimed at reducing the physical labor required in oyster aquaculture at Bama Bay Oyster Farm, the last operational oyster farm in Mobile Bay. The proposed system includes two primary components: lightweight, modular oyster cages and a dual-winch reeling device for automated retrieval. Three cage prototypes—rectangular, oval, and hexagonal—were evaluated for structural performance and fabrication feasibility. The oval design was ultimately excluded due to practical fabrication limitations. The rectangular and hexagonal designs were fabricated using recycled materials and tested under the most extreme environmental conditions derived from years …

Finding Groundwater With Electricity: Research And Testing Of An Electro-Resistive Ground-Surveying Device For Use In Well-Drilling Applications, Samuel L. Heath

Senior Honors Theses

A custom-built electro-resistive water detection device is tested under various conditions to evaluate its overall performance and sensitivity to changing variables. The tests, designed to assess accuracy and precision, revealed that the prototype exhibits high reliability (~ 99%) for both Schlumberger and Wenner arrays across different electrode spacings and soil conditions. Moreover, the measured resistivity values from the soil tests aligned with established literature ranges for each soil type. The device also showed the ability to consistently detect changes in soil water content by producing measurable variations in resistivity. At a total cost of $181, this prototype can serve as …

Vibration-Based Algorithm For Diagnostic And Prognostic Condition Monitoring Of Railroad Bearings And Wheels, Jeffery Ray Pams

Theses and Dissertations

Bearing and wheel failure accounts for the majority of equipment-related train derailments on US railroads. Current wayside monitoring systems have been insufficient in the prevention of catastrophic derailments prompting the rail industry to explore the possible integration of onboard condition monitoring systems into their rail operations. The University Transportation Center for Railway Safety (UTCRS) in partnership with Hum Industrial Technology, Inc., has developed a wireless onboard system intended for the condition monitoring of railroad bearings and wheels. This thesis presents the development, evaluation, and implementation of an algorithm designed to be used in conjunction with these systems to provide railroad …

The Prototype Of A Fully Automated Pressuremeter For Various Geotechnical Applications, Anuar Akchurin

Theses and Dissertations

The geotechnical engineering field requires high-quality in-situ testing equipment that ensures consistency in the test execution. This research focuses on developing and testing a prototype of a fully automated pressuremeter control unit to allow the industry to obtain reliable and controlled stress-strain data, thereby improving efficiency and reducing testing time.

The objectives of this work are to design and develop a system with the necessary components to perform the pressuremeter test, integrate the testing procedure into the state machine design, enable automated testing, and validate the results by comparing the stress-strain data with that obtained from the existing hand-operated pressuremeter …

Building Resilience: Strategies For Sustainable Wildfire Management In California, Jaiden Rennie, Pegah Zamani

Symposium of Student Scholars

Wildfires in California are becoming more intense and destructive, threatening communities, ecosystems, and livelihoods. This project explores how resilience and sustainability can work together to reduce wildfire risks and long-term damage. By reviewing research, case studies, and expert insights, it examines what’s driving these fires, climate change, poor land management, and human activity, and looks at solutions that can make a real difference. From community education programs to AI-driven fire detection and smarter policies, the findings highlight practical ways to better prepare for and manage wildfires. The goal is to contribute to a future where communities and the environment are …

Dust Analyses In Ventilation Ducts, Karolina Vyhlidalova, Petr Vlček, Olga Rubinová, Jiří Bernard

Journal of Sustainable Construction Materials and Technologies

The paper describes the importance of monitoring the dust in the atmosphere of human life. It deals with the issue of dust in air ducts, approaching the methods that can be used to detect the amount of dust. For conditions for buildings in the Czech Republic there is created the methodology of quantitative and qualitative evaluation of dust sediment for the needs of HVAC and other building surfaces. The scale for visual evaluation was created and it has been elaborated the assessment of kind of particles contained in dust.

Assessment Of Long Time Approximation Equation To Determine Thermal Conductivity Of High Porous Materials With Nss Probe, Hussein Humaish, Bastien Ruet, Laurent Marmoret, Hassen Beji

Journal of Sustainable Construction Materials and Technologies

Recent economic changes have increased the focus on energy conservation in buildings. Improve insulation represents one of the biggest challenge to save energy. The TP02 Huksefux® Non Steady State Probe (NSSP) has been used to determine the thermal conductivity of the building insulation materials. Usually, the long term approximation equation (linear form) is applied to determine the thermal conductivity when using hot wire techniques. Long term approximation has been successfully used to characterize glycerol: a fluid which doesn’t present contact resistance and porosity. But, an S-shaped appears for more porous materials. So to generalize the possibility of using this method, …

Wind-Resilient Solar: Harnessing Cfd For Enhanced Load Estimation, Aly Mousaad Aly

Faculty Publications

Solar panels are a cornerstone of renewable energy infrastructure, playing a pivotal role in global sustainability efforts. To ensure their resilience and long-term viability, accurate wind load estimations are essential for designing supporting structures, which account for nearly 50% of their total cost. However, traditional building codes lack comprehensive guidance for solar panels, resulting in inconsistent estimations due to discrepancies in scaled wall-bounded wind tunnel testing methodologies. These inaccuracies pose safety risks, increase costs, and hinder adoption. Emerging technologies like computational fluid dynamics (CFD) simulations offer a promising alternative by enabling full-scale analysis under realistic conditions of complete turbulence. This …

Advancing Solar Farm Resilience: Cfd-Driven Wind Load Optimization, Aly Mousaad Aly

Faculty Publications

This study investigates wind load design methods for ground-mounted solar panels and arrays by comparing Computational Fluid Dynamics (CFD) simulations with design standards. A case study of a solar farm impacted by Hurricane Maria examines the effects of elevation height, tilt angle, and variations in the American Society of Civil Engineers (ASCE) standards on wind loads and structural failure. Turbulence models, including Reynolds Stress Model, k–ε Model, and Large Eddy Simulation (LES), are used to analyze wind pressures, lift, drag, and peak pressures. Results show Phase 1 experienced higher wind loads than Phase 2 due to design differences. A cost-benefit …

Impulse, Spring 2025, Jill Fier, Micayla Standish, Jerome J. Lohr College Of Engineering

Impulse (Jerome J. Lohr College of Engineering Publication)

2 | Faculty, Staff Honored
4 | The State of Lithium
6 | 100 Years of Ag and Biosystems Engineering
8 | Major Milestones
12 | Distinguished Engineer Geldert-Murphy
14 | Distinguished Engineering Heitkamp
16 | By the Numbers
18 | Space Grant Consortium at SDSU
20 | Healthcare Systems Engineering Program
22 | Ridgway Three-Peat
23 | Aerospace Club Launches
24 | Power and Energy Scholarships
25 | More Take Part in Nasa Challenges
26 | Weber Recognized as Student Leader
30 | Wild Hare Racing Ready
32| Sebern’s Success as Sole Operator
34 | Meink: From Prairie to …

Investigating The Discrepancies Between Acoustic And Radar Measurements Of Water Level Using Data Analysis And Computational Modeling, Ohiedul Haque Mohammad Asad

Civil & Environmental Engineering Theses & Dissertations

Observations indicate that there is a discrepancy between water level measurements from NOAA’s acoustic gauges and radar gauges. NOAA’s acoustic gauges use a downward-looking acoustic sensor that measures the instantaneous distance from the sensor to the water level. To create a calm water surface for measurements, the sensor is placed in a PVC tube that penetrates the water surface to a certain depth. This tube is called the stilling well. In this thesis, discrepancies in water level measurements from acoustic and radar sensors were explored through data analysis and computational modeling. Specifically, the correlations between the error, which is defined …

Intelligent Turning Cyber-Physical Systems Modeling Using Sysml, Prithbey Raj Dey, David Lee Enke, Mario F. Buchely

Engineering Management and Systems Engineering Faculty Research & Creative Works

Cyber-Physical Systems (CPS) support industrial automation that incorporates people, hardware, signal, computation, and control using networking to achieve desired results. The complex automated CPS design demands a standard and comprehensive approach to appropriately identify the system requirements, define the architecture, and model the relationships among the software and hardware components. Systems Modeling Language (SysML) provides the capability for a comprehensive modeling to capture the desired design requirements in the systems architecture. SysML enables performance estimation of the model by analyzing constraints while identifying interactions among the components through various behavioral diagrams. In this paper, SysML is applied to the design …

Enhancing The Efficiency Of Eaop Degradation Using Ultrasound: A Study With Methylene Blue And Pfoa As Model Pollutants, Jamiu Busayo Ahmed

Master's Theses

No abstract provided.

Development Of Planetary Drive System For Formula Sae Electric Race Car, Brian Wong, Bradley Maruoka, Joshua Charles Fine, Madison Kai

Mechanical Engineering

Hub motors are compact electric motors mounted directly on each outboard wheel hub. Utilized in Formula SAE and Formula Student vehicles, this configuration offers several advantages over traditional drivetrains, including packaging optimization within the chassis, vehicle traction, and improved efficiency. Although hub motors are not yet common in 4WD vehicles, they are being explored for use in EVs and may become more common in the future. Every year, Cal Poly Racing FSAE designs and builds a formula-style race car. To improve drivetrain performance, the team is investigating the achievability of a hub motor 4WD drivetrain, requiring extensive research, development, and …

Design And Implementation Of Secured Hybrid Gateway Node For Securing Iot - Enabled Distribution Automation, Ally Bitebo

Tanzania Journal of Engineering and Technology (TJET)

The integration of smart grid and Internet of Things (IoT) technologies plays a crucial role in enhancing the quality of services provided by traditional electrical grids. This combination has enabled the introduction of new services, such as demand response, automatic meter reading, and IoT-enabled Distribution Automation (IoT-DA), which incorporates sensors, actuators, intelligent electrical devices (IEDs), and information and communication technologies to monitor and control the grid. However, this integration also introduces network security risks, including Denial of Service (DoS) attacks, false data injection, and masquerading attacks, such as system node impersonation that can transmit incorrect readings, trigger false alarms, and …

Effects Of Technical Debt On Software Interoperability, Leonard Peter Binamungu

Tanzania Journal of Engineering and Technology (TJET)

Technical debt (TD) refers to sub-optimal development decisions that make the software costly to maintain and evolve. Examples of TD include structural complexity, violation of coding styles, and code complexity. Existing research has investigated the nature, causes and indicators of TD, as well as tools and strategies for managing TD. However, although TD could hinder the ability of a software system to be interoperable with others, existing literature has limited evidence on how TD affects systems interoperability. This limits the ability of software engineering teams to manage TD in ways that do not hinder systems interoperability. To fill this void, …

Lessons In Low-Tech: A Handbook For Sustainable Education, Ceri Almrott, Loann Astorino, Sébastien Bette, Benoit Delinchant, Philippe Fortemps, Ulysse Girard, Paul Hendrick, Sacha Hodencq, Fabian Lecron, Julie Lhuissier, Kévin Loesle, Luis Miguel Lopez Santiago, Santiago Perez Rodriguez, Gauthier Renard, Tatiana Reyes, Virginie Vandenbulcke, John Walsh

Other resources

LT4SUSTAIN, an Erasmus+ funded transnational project, is at the forefront of responding to the increasing awareness of environmental and climate challenges. This awareness, particularly among youth, has led to a demand for social justice. With the coordinated work among six institutions, ranging from higher education institutions to private companies and associations, LT4SUSTAIN aims to raise awareness of Lowtech across society.

LT4SUSTAIN is pioneering a unique approach to technology design. By developing “hackathons” and other “hands-on” events, we are engaging students and industry in a way that improves inclusiveness. Our objective is to equip individuals with the skills to embark on …

Thermo-Rheological And Tribological Properties Of Low- And High-Oleic Vegetable Oils As Sustainable Bio-Based Lubricants, Abiodun Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Vegetable oil-based lubricants have attracted increased research attention in recent decades as sustainable alternatives to conventional petroleum-based lubricants in metal machining. However, more studies are required to fully elucidate the thermo-rheological and tribological properties. This study presents an investigation of the thermo-rheological and tribological properties of different vegetable oils, including low- and high-oleic soybean oil, high-oleic sunflower, safflower, and canola oils. The lubricity, and evolution of viscosity and thermodynamic properties as a function of temperature were investigated to obtain important parameters including the viscosity index, flow behavior index, flow activation energy, specific heat capacity, thermal conductivity, coefficient of friction, contact …

Simplified Molecular Diagnostics Methods For Environmental Testing Of Pathogens And Other Applications, Mohammad Dehghan Banadaki

Theses and Dissertations--Mechanical and Aerospace Engineering

Environmental Surveillance (ES) has emerged as a powerful tool to monitor the emergence and persistence of a pathogen within a facility or community using wastewater/water analysis. Over the past four years, implementation of ES has experienced an explosive acceleration, driven by efforts to monitor the spread of SARS-CoV-2, which has made ES a routinely used public health tool in many locations. We can now use ES to measure the emergence/presence/abundance of different viruses (e.g., SARS-CoV-2, influenza, mpox), bacteria (e.g., E. coli, V. cholerae, antibiotic-resistant strains), fungi (e.g., C. auris), and other biological markers indicative of infectious diseases. However, its broad …

Controlling Nitrogen Pickup During Induction Melting Of Ultrahigh-Strength Cr-Ni-Mo-V Steels, Kingsley T. Amatanweze, Viraj A. Athavale, Mario F. Buchely, Laura N. Bartlett, Ronald J. O'Malley, Daniel M. Field

Materials Science and Engineering Faculty Research & Creative Works

Nitrogen pickup during air induction melting can result in porosity and a loss of fracture toughness in ultrahigh-strength quenched and tempered steel castings. Nitrogen atoms are easily adsorbed into liquid steel upon exposure to the air, and argon shrouding alone has limited effectiveness. Previous studies have shown that proper charge sequencing and maintaining a high amount of dissolved oxygen in the melt prior to tapping and deoxidation can limit nitrogen pickup in the melt. In the current study, the effect of melt practice and charging procedure on nitrogen pickup was studied as a function of hold time in a series …

Parametric Analysis Of Water Jet Descaling Efficiency Of Reheated Continuously Cast Thin Slab, Tochukwu P. Ojiako, Mario F. Buchely, Simon Lekakh, Ronald J. O'Malley, Richard Osei, Taha Tayebali

Materials Science and Engineering Faculty Research & Creative Works

Efficient oxide scale removal is critical for maintaining surface quality and process efficiency in steel manufacturing. This study optimizes water jet descaling by evaluating the performance of flat and rotary jet nozzles under varying process parameters. Using a combined approach of experimental analysis and computational fluid dynamics, it investigates the influence of pressure (138–275 bar), lead angle (0°, 15°, 25°), working distance (50–100 mm), and spray angle (15°–25°) on descaling efficiency. Findings indicate that flat jet nozzles achieve superior performance at short working distances due to concentrated impact forces, while rotary jet nozzles sustain efficiency over extended distances through dynamic …

Effect Of Gating Design On Filling And Inclusion Control In An Al-Killed Cr-Mo-Ni Steel, Kingsley T. Amatanweze, Koushik Balasubramanian, Soumava Chakraborty, Viraj A. Athavale, Mario F. Buchely, Laura N. Bartlett, Ronald J. O'Malley, Daniel M. Field, Krista R. Limmer, Katherine M. Sebeck

Materials Science and Engineering Faculty Research & Creative Works

The effect of gating system design on the inclusion population and size distribution in an aluminum-killed low-alloy advanced high strength steel casting was studied. A mold with four different gating systems: pressurized and non-pressurized with side risers, naturally pressurized with a side riser, and naturally pressurized with a top riser, was designed using computational fluid dynamics and solidification software. The design allowed inclusion populations in castings produced with each gating system to be compared during the same pouring event. Samples taken from different positions just below the top surface of each casting were analyzed using an SEM/EDS system with automated …

Evaluating The Effectiveness Of Stay-In-Place Forms To Improve The Tosional Stability Of Box Beam Bridges During Erection, Karl E. Barth, Michael W. Seek, Gregory K. Michaelson, Dimitra Pyrialakou, Brook T. Woldegabriel

Engineering Technology Faculty Publications

Cold-formed tub girders provide an effective steel solution for short-span bridges. The girders are often delivered with an open top with stay-in-place forms installed on site. Walkways may be installed to the side of the girder that can induce significant torsion rotations in the open cross section. Full scale tests on girder specimens have shown that installing one or two panels of stay in place forms at the ends of the girder can significantly reduce the torsion rotation of the girder by providing warping resistance. Cantilever tests on the stay in place forms are performed to investigate the influence of …

Design, Fabrication, & Laboratory Testing Of A Strain Gage Instrumentation System For Marine Applications, Salem C. Homrighausen

UNF Graduate Theses and Dissertations

A strain gage-based instrumentation system was designed and fabricated to measure the moment present at the base of a mock, diesel-engine snorkel for a submerged vehicle designed to operate in the surf zone. Afterwards, a lab experiment was designed and executed to determine the accuracy of the instrument and a 2-dimensional, matrix-vector equation was formulated to relate pairs of voltages, Vx and Vy, to moments, Mx and My for the experiment. Three versions of this model were built. The first model was created using traditional statics equations governing strain, stress, moment, force. The second and third models were built directly …

Application Of Satellite Interferometry To Tailings Damages To Determine Their Stability, Mukhlisa Khasanovna Rakhimova

Technical science and innovation

In our country and abroad, the construction of special alluvial hydraulic structures - tailings storage facilities - is being carried out on a large scale for storing waste from the mineral enrichment process, the operation of which requires ensuring and observing strict technological control, failure of which leads to serious accidents and even disasters. Tailings dams play a critical role in the mining and metallurgy industry by providing safe storage of production waste. However, their stability and safety are a constant concern. Satellite interferometry (InSAR) is an innovative technology that can effectively monitor deformations and changes in the condition of …

Energy-Efficient Technologies For Drying Mulberry Silkworm Cocoons Using Infrared Radiation, Doston Ishmukhammat Ugli Samandarov

Technical science and innovation

The article presents the results of theoretical and experimental studies on drying of mulberry silkworm cocoons. Based on the analysis of drying efficiency and silk quality, the use of infrared radiation (IR) at a temperature of 70 °C was found to be optimal. The experimental data were tested on six mathematical models, among which the Midilli model most accurately described the drying process. The effective moisture diffusion coefficient was found to vary in the range of 1.847×10^-⁹-4.339×10^-⁹ m²/s, and the drying rate was found to be 0.32-0.79 kg of water/hour. IR radiation promotes accelerated evaporation of …