Civil and Environmental Engineering Commons^™

A Study On Dielectric Properties Of The Cellulose Derivative-Nh4br-Glycerol- Based The Solid Polymer Electrolyte System, Nur Muhitul Jalilah Rasali, Saifful Kamaluddin Muzakir, Ahmad Salihin Samsudin

Makara Journal of Technology

The characterization of biopolymer-based solid polymer electrolytes (SPEs) has been carried out in this present work. Cellulose derivative was chosen due to its superior physical attributes. In this work, NH4Br-doped glycerol plasticized carboxyl methylcellulose-based SPEs were successfully prepared via the solution casting method. The conductivity and dielectric properties of the prepared films were investigated using the impedance analysis which presented ~1.91×10-3 Scm-1 (with addition of 6 wt% of glycerol). In addition, the studied SPE system shows a non-Debye behaviour without a single relaxation time. The findings of the research indicate that the complexes of NH4Br and glycerol in the cellulose …

Urban Drainage Management And Flood Control Improvement Using The Duflow Case Study: Aur Sub Catchment, Palembang, South Sumatra, Indonesia, Charlotte De Fraiture, Robiyanto Hendro Susanto, F.X. Suryadi, Harrini Mutiara Hapsari Wahyu

Makara Journal of Technology

Urban flooding often times staggers the livelihood in an urban area, which most likely happens in the lowland urban area. Therefore, the existing urban drainage system should be improved in order to tackle the upcoming urban flooding events, which are more than likely to be more devastating than those in the previous years. The research location is in Palembang, Sumatra, Indonesia, where 30% of its urban part is a lowland area. The selected Aur Sub Catchment is located in Silaberanti. The main objective of this research is to improve the current drainage system in order to achieve the optimal design …

Ethanol Purification Using Activated Natural Zeolite, Chandra Wahyu Purnomo, Nelliza Putri, Indra Perdana, Hirofumi Hinode

Makara Journal of Technology

Bio ethanol is one of the potential fuels in the future. However, ethanol in water mixture has an azeotropic concentration of 95.6 wt. %, which makes it difficult to purify further. The common method of purification is by using an azeotropic distillation column, which requires an intensive energy and an addition of specific solvent. In this study, ethanol purification is done using an adsorption column packed with zeolite Raschig rings. The natural zeolite ring was modified beforehand using the NaOH solution to enhance the material’s water adsorption performance. The ethanol purity can reach more than 99% with the modified zeolite …

Physical And Mechanical Properties Of Palm Kernel Oil-Based Polyester Polyurethane/Multi-Walled Carbon Nanotube Composites, Khairul Anuar Mat Amin, Muhammad Alif Zailani, Nurul Nabilah Zulkifli, Khairiah Haji Badri

Makara Journal of Technology

In this study, polyurethane (PU) films from palm kernel oil-based polyester (PKO-p) incorporated multi-walled carbon nanotubes (MWNTs) are prepared via a evaporative casting method. Nanoparticle fluid dispersions containing 0.02%, 0.03%, and 0.05% wt. of MWNTs are added into PKO-p based resin and mixed by digital probe sonicator for 30 min followed by mixing with isocyanate to produce PU-MWNTs composite films. The mechanical properties, swelling, water vapour transmission rate (WVTR) and conductivity of the PU-MWNTs composite films are examined. Results show that the toughness (T) or flexibility, the tensile strength (TS), and Young’s modulus (YM) values of PU-MWNTs composite films increase …

Personality Trait Based Intervention For Workplace Accident Prevention, Yassierli Yassierli, Nurhayati Nurhayati, Marisa Anatasia, Shamsul Bahri

Makara Journal of Technology

Previous research has suggested that some traits may be useful as the predictors of risk behaviours behaviors. Therefore, personality traits seem to play a role in accident involvement. The purpose of this study is was to explore the relationship between the personality traits based on the Big Five Inventory (BFI) and worker accident experiences in order to elaborate personality traits based intervention for workplace accident prevention. A cross cross-sectional study was conducted among 173 workers in a cement company using a set of questionnaires consisting of respondents’ characteristics, BFI, and self-reported accident experience. The correlations were computed using Goodman Kruskal’s …

The Impact Of Power Curve Estimation On Commercial Wind Power Forecasts - An Empirical Analysis, Gianni Goretti, Aidan Duffy, Tek Tjing Lie

Conference papers

An increasing number of utilities participating in the energy market require short term (i.e. up to 48 hours) power forecasts for renewable generation in order to optimize technical and financial performances. As a result, a large number of forecast providers now operate in the marketplace, each using different methods and offering a wide range of services. This paper assesses five different day-ahead wind power forecasts generated by various service providers currently operating in the market, and compares their performance against the state-of-the-art of short-term wind power forecasting. The work focuses on how power curve estimations can introduce systematic errors that …

Introduction To Signal Timing & Traffic Control, Sarah V. Hernandez, Mariah Crew, Karla Diaz-Corro, Taslima Akter

Civil Engineering Teaching and Learning

The purpose of these lesson plans is to introduce students to traffic signalization basics. Students will be lead through a series of mini-lectures on traffic control and signalization including a discussion on the limitations and benefits of traffic signalization. The lesson plans compliment a computer simulation “game” in which students act as manual operators for a single up to four by four gridded intersection. Students attempt to control the progression of signals to understand the relationship between signal timing and user delay. Through experimentation with the simulation, students generate a presentation discussing the benefits and drawbacks of signal timing and …

Estimating Transit Ridership Patterns Through Automated Data Collection Technology: A Case Study In San Luis Obispo, California, Ashley Kim

Master's Theses

Public transportation offers a crucial solution to the travel demand in light of national and global economic, energy, and environmental challenges. If implemented effectively, public transit offers an affordable, convenient, and sustainable transportation mode. Implementation of new technologies for information-harvesting may lead to more effective transit operations. This study examines the potential of automated data collection technologies to analyzing and understand the origin-destination flow patterns, which is essential for transit route planning and stop location placement.

This thesis investigates the collection and analysis of data of passengers onboard San Luis Obispo Transit buses in February and March 2017 using Bluetooth …

2017 Spring Engr333 Project Final Report (Section A), Devin Auld, Scott Bokach, Joshua Bronner, Alex Meador, Ryan Hoek, Robert Lanser, Matthew Lenko, Elliot Slenk, Brendan Biesboer, Kyle Mailhot, Nate Zylstra, Jonah Engel, Rich Floro, Björn Krebs, Ethan Postmus, Cameron Bell, Caleb Bieske, Chris Griffin, Bernice Portugal, Ryan Beezhold, Dillon Carhuff, Ian Mcclaskie, Jared Vanderklay, Rounak Chatterjee, Toby Dalla Santa, Jenny Haney, Joel Hoskins, Caleb Senyshyn

ENGR 333

The objective of ENGR-333-A was to develop a well-defined, bottom-up energy demand model for the energy consumption of the dormitories on Calvin College’s campus for each year of the past decade within an accuracy of ± 2%.

2017 Spring Engr333 Project Final Report (Section B), Daniel Dick, Nathan Swaim, Jonathan Sager, Ellen Reidy, Jordan Swets, Joel Van Dyke, Connor Macdonald, Josiah Markvluwer, Justin Rohlicek, John Lee, Zach Mouw, Daniel Wharton, Sam Hanover, Jay Noyola, Adam Christenson, Scott Stamper, Aaron Tucker, Bethany Waanders, Joel Schaefer, Maddie Collins, Matthew Cok, Philip Kim, Steve Vanden Berg

ENGR 333

The Physical Education Complex is located in the North-end of Calvin College’s campus, and supports many athletic, academic, event and recreational functions. Due to its heavy use, the complex contributes 20% of the College’s electricity consumption. Monetarily, this equated to electricity costs of about $385,000 last year. With these financial implications, the College is searching for ways to reduce the cost. While there is little to no room for electricity cost rate reductions, there is opportunity for improvement through the implementation of more efficient components. However, the sources of electricity demand are largely unknown. Our objective is to develop a …

2017 Spring Engr333 Seminar Presentation, Jonah Engel, Rich Floro, Björn Krebs, Ethan Postmus, Brendan Biesboer, Kyle Mailhot, Nate Zylstra, Ryan Beezhold, Dillon Carhuff, Ian Mcclaskie, Jared Vanderklay, Rounak Chatterjee, Toby Dalla Santa, Jennifer Haney, Joel Hoskins, Caleb Senyshyn, Alex Meador, Scott Bokach, Devin Auld, Joshua Bronner, Elliot Slenk, Matthew Lenko, Robert Lanser, Ryan Hoek, Cameron Bell, Caleb Bieske, Chris Griffin, Bernice Portugal, Sam Hanover, Dan Wharton, Jay Noyola, Zachary Mouw, John Lee, Daniel Dick, Jonathan Sager, Nathan Swaim, Ellen Reidy, Jordan Swets, Joel Van Dyke, Connor Macdonald, Josiah Markvluwer, Justin Rohlicek, Adam Christensen, Scott Stamper, Aaron Tucker, Bethany Waanders, Joel Schaefer, Maddie Collins, Matthew Cok, Philip Kim, Steve Vanden Berg

ENGR 333

File for student presentation, given by students in the Spring 2017 class of ENGR333.

College Of Engineering Senior Design Competition Spring 2017, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Transportation Engineering: Traffic Control Simulator, Sarah V. Hernandez, Karla Diaz-Corro, Taslima Akter, Magdalena Asborno, Fu Durandal

Civil Engineering Teaching and Learning

The purpose of these lesson plans is to introduce students to traffic signalization basics. Students will be lead through a series of mini-lectures on traffic control and signalization including a discussion on the limitations and benefits of traffic signalization. The lesson plans compliment a computer simulation “game” in which students act as manual operators for a single up to four by four gridded intersection. Students attempt to control the progression of signals to understand the relationship between signal timing and user delay. Through experimentation with the simulation, students generate a presentation discussing the benefits and drawbacks of signal timing and …

A Plastic Design Method For Rc Moment Frame Buildings Against Progressive Collapse, Hadi Faghihmaleki

Makara Journal of Technology

In this study, progressive collapse potential of generic 3-, 8- and 12-storey RC moment frame buildings designed based on IBC-2006 code was investigated by performing non-linear static and dynamic analyses. It was observed that the model structures had high potential for progressive collapse when the second floor column was suddenly removed. Then, the size of beams required to satisfy the failure criteria for progressive collapse was obtained by using the virtual work method; i.e., using the equilibrium of the external work done by gravity load due to loss of a column and the internal work done by plastic rotation of …

In Vitro Toxicity Evaluation Of Caffeine Imprinted Polymer (Caf-Mip) For Decaffeination Method On Normal Chang Liver Cells, Fatimah Hashim, Faizatul Shimal Mehamod, Naizatul Akmal Nawi

Makara Journal of Technology

Over consuming of caffeine is one of the factors to a few health problems such as insomnia, hypertension and cardiovascular disease. This preliminary study was conducted to evaluate the Caffeine-Imprinted Polymer (CAF-MIP) toxicity that was synthesized for a new alternative method for decaffeination. It is crucial to evaluate the toxicity of CAF-MIPas this product is potential to be used as complimentary with any drinks containing caffeine. In this study, the CAF-MIP toxicity potential was confirmed on Normal Chang Liver cell (NCLC) based on its IC50 value andacridine orange and propidium iodide (AO/PI) staining for mode of cell death observation.Proliferation assay …

Sorption And Ion Exchange Behaviour Of Natural Zeolite Packing, Chandra Wahyu Purnomo, Bernice Lenora, Wiratni Budhijanto, Hirofumi Hinode

Makara Journal of Technology

It is well known that zeolite is an efficient metal ions adsorbent. The excess charge of the zeolite building blocks i.e. (AlO4)-5 and (SiO4)-4 creating a negative surface charge that attract metal cations. Beside the surface charge, zeolite also has three dimensional pore structure and reasonably large surface area which also can be used as adsorption sites. Ease of cation uptake make it suitable for many process with adsorption and desorption application. This study was conducted to observe the sorption and ion exchange behaviour of zeolite-betonite rings toward iron and cobalt cations. The results shows that the adsorption patterns follow …

Encapsulation Process Of Propolis Extract By Casein Micelle Improves Sunscreen Activity, Muhamad Sahlan, Dara Dienayati, Darul Hamdi, Soraya Zahra, Heri Hermansyah, Malyn Chulasiri

Makara Journal of Technology

Propolis, a wax bee glue, have antioxidant activity and effective as broad spectrum UVB and UVA photoprotection sunscreens agent. To improve photoprotection activity in sunscreen cream, the propolis was encapsulated by casein micelle. The Indonesian propolis was extracted by ethanol and separated the wax by freeze precipitation. The extract was encapsulated by casein and reduced their size by ball mill homogenizer with the encapsulation efficiency about 80% and size of particles about 80 nm. The particles was applied in sunscreen cream, evaluate their stabillity and photoprotection activity Sun Protection Factor (SPF) spectrophotometer (Optometric 290s). The results shows that the selected …

Nano-Channels Early Formation Investigation On Stainless Steel 316ti After Immersion In Molten Pb-Bi, Abu Khalid Rivai, Mardiyanto Mardiyanto, Annette Heinzel

Makara Journal of Technology

Development of fuel cladding and structural materials in Pb-Bi environment, especially at high temperature, is a critical issue for the deployment of LFR (Lead alloy-cooled Fast Reactor) and ADS (Accelerator Driven Transmutation System). This is because of the corrosive characteristic of Pb-Bi to metals as constituent materials of fuel cladding and structural of the reactors. Corrosion test of a high-chromium austenitic stainless steel i.e. SS316Ti in molten Pb-Bi at 550 ºC has been carried out for about 300 hours continuously. The characterization using SEM-EDS (Scanning Electron Microscopy - Energy Dispersive X-ray Spectroscopy) showed that an iron oxide as the outer …

Synthesis Of Libob Fine Powder To Increase Solubility, Etty Marti Wigayati, Titik Lestariningsih, Christin Rina Ratri, Ibrahim Purawiardi, Bambang Prihandoko

Makara Journal of Technology

Lithium bis (oxalate) borate or LiBOB compound has captured interest of researchers, because it is potentially viable to be used as electrolyte salt in lithium-ion battery system. This compound is easy to synthesize and considered to be more environmentally friendly compared to conventional electrolyte salt because LiBOB does not contain halogen element. This research focused on the synthesis of LiBOB fine powder, which main purpose is improving LiBOB salt solubility in liquid electrolyte solution. This will aid the ion transfer between electrodes which in turn will increase the electrolyte performance. Solid state reaction was employed in this experiment. Synthesis of …

Influence Of Polyethylene Glycol (Peg) In Cmc-Nh4br Based Polymer Electrolytes: Conductivity And Electrical Study, Nur Khalidah Zainuddin, Ahmad Salihin Samsudin

Makara Journal of Technology

The present work was carried with new type and promising polymer electrolytes system by development of carboxyl methylcellulose (CMC) doped NH4Br and plasticized with polyethylene glycol (PEG). The sample was successfully prepared via solution casting with no separation phase and good mechanical properties. The electrical conductivity and thermal conductivity of CMC-NH4Br-PEG based PEs system have been measured by the electrical impedance spectroscopy method in the temperature range of 303–373 K. The highest ionic conductivity gained is 2.48 x 10-3 Scm-1 at ambient temperature for sample contain with 8 wt. % PEG. It can be concluded that the plasticized is accountable …

Purification Simulation With Vapor Permeation And Distillation-Adsorption In Bioethanol Plant, Misri Gozan, Mia Sari Setiawan, Kenny Lischer

Makara Journal of Technology

High purity of Bioethanol is required in biofuel mixing with gasoline (EXX). In bioethanol production line, the azeotropic property of ethanol-water becomes the barrier for purification process. This study examined two bioethanol separation processes by support of simulation tools, Superpro Designer 9.0 software. Ethanol purity and a low costeconomical process were the major considerations. Purification method of vapor permeation membrane technology was compared with distillation-adsorption method. Data from previous lab experiments and some literatures were used. The results showed that distillation-adsorption method is more economical compared to vapor permeation technology. Payback period of the simulation is 3.9 years and 4.3 …

2017 Spring Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Spring 2017 ENGR333 project focused on campus energy consumption.

I asked the students “Can you construct a fine-grained, bottom-up electricity demand model that predicts the annual electricity consumption for the dormitories (section A) and the PE complex (section B) for each year of the last decade with an accuracy of ±2%?”

Customer

The customer for this project was Jack Phillips, Assistant Director (Mechanical) at Calvin’s Physical Plant.

Automatic Power Management For Instructional Computers At Humboldt State University: A Calculation Of Potential Energy Savings And Greenhouse Gas Emissions Reductions, Nicholas F. Flenghi

Projects

Computers consume an estimated 5,610 GWh per year in California alone. Much of that energy is consumed by computers that are not being used. In this project, detailed user login data are used to estimate the energy consumption of instructional computers at Humboldt State University (HSU) over the course of one semester. The data are also used to estimate the potential energy savings from automating the shutdown process. Potential cost savings and greenhouse gas (GHG) emissions reductions resulting from implementing an automatic-shutdown power management plan are also calculated.

There are approximately 1,000 computers used for teaching and learning purposes at …

Development Of A Novel Kalman Filter Bank Predictor To Optimally Schedule The Renewable Energy Contribution Within A Micro-Grid, Conor Lynch

Theses

This PhD thesis presents a novel Kalman Filter Bank (KFB) methodology. The novel KFB is applied to predict and optimally schedule the operation of micro-grid energy resources with a public fixed-grid connection and an auxiliary battery storage backup facility. This methodology relies on a sliding single time step forecast projection to accurately acquire the anticipated schedule for a range of time dependent parameters, stochastic by nature, that have inherent embedded cyclical patterns. The innovative feature here consists of a novel bank of hourly adjacent Kalman Filter estimators, which operate in synchronism, for accurate parameter prediction over a selected time horizon. …

Identification, Calculation And Warning Of Horizontal Curves For Low-Volume Two-Lane Roadways Using Smartphone Sensors, Shaohu Zhang

Electronic Theses and Dissertations

Smartphones and other portable personal devices that integrate global positioning systems, Bluetooth Low Energy, and advanced computing technologies have become more accessible due to affordable prices, product innovation, and people’s desire to be connected. As more people own these devices, there are greater opportunities for data acquisition in Intelligent Transportation Systems, and for vehicle-to-infrastructure communication. Horizontal curves are a common factor in the number of observed roadway crashes. Identifying locations and geometric characteristics of the horizontal curves plays a critical role in crash prediction and prevention, and timely curve warnings save lives. However, most states in the US face a …

Optimising The Performance Of Cement-Based Batteries, Aimee Byrne, Shane Barry, Niall Holmes Dr., Brian Norton

Articles

The development of a battery using different cement-based electrolytes to provide a low but potentially sustainable source of electricity is described. The current, voltage, and lifespan of batteries produced using different electrolyte additives, copper plate cathodes, and (usually) aluminium plate anodes were compared to identify the optimum design, components, and proportions to increase power output and longevity. Parameters examined include water/cement ratio, anode to cathode surface area ratio, electrode material, electrode spacing, and the effect of sand, aggregate, salts, carbon black, silica fume, and sodium silicate on the electrolyte. The results indicate that the greatest and longest lasting power can …

Smart Rocks For Bridge Scour Monitoring -- Design And Localization Using Electromagnetic Techniques And Embedded Orientation Sensors, Andro Radchenko

Doctoral Dissertations

"River bridge scour is an erosion process in which flowing water removes sediment materials (such as sand, rocks) from a bridge foundation, river beds and banks. As a result, the level of the river bed near a bridge pier is lowering such that the bridge foundation stability can be compromised, and the bridge can collapse. The scour is a dynamic process, which can accelerate rapidly during a flood event. Thus, regular monitoring of the scour progress is necessary to be performed at most river bridges. Present techniques are usually expensive, require large man/hour efforts, and often lack the real-time monitoring …

Detection Of Fatigue Damage In Shear Connections Using Acoustic Wave Propagation, Zichao Wang

Dissertations, Master's Theses and Master's Reports

Fatigue damage is an important concern in structural steel connections where frequent load reversals are expected. Detection of fatigue damage is typically done with infrequent visual inspections that are subjective and limited to surface features. A permanent embedded structural health monitoring (SHM) system could be helpful in detecting damage as it occurs. Current methods for detecting fatigue damage include inference of fatigue life expended through cycle counting from long-term strain measurement campaigns, and through short-term impedance measurements. The first approach has the advantage that it is relatively simple from an algorithmic point of view, but it is an indirect measure …

Audio-Based Productivity Forecasting Of Construction Cyclic Activities, Chris A. Sabillon

College of Graduate Studies: Theses & Dissertations

Due to its high cost, project managers must be able to monitor the performance of construction heavy equipment promptly. This cannot be achieved through traditional management techniques, which are based on direct observation or on estimations from historical data. Some manufacturers have started to integrate their proprietary technologies, but construction contractors are unlikely to have a fleet of entirely new and single manufacturer equipment for this to represent a solution. Third party automated approaches include the use of active sensors such as accelerometers and gyroscopes, passive technologies such as computer vision and image processing, and audio signal processing. Hitherto, most …

College Of Engineering Senior Design Competition Fall 2016, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …