Civil and Environmental Engineering Commons^™

Residential Thermal Storage And Cooling, Joao Marcelo Rocha Belmonte, Jacob Anderson, Andrew Clarke, Daphne Forester, Bianca Hardtke, Josh Hartman, Marc D. Compere

Sustainability Conference

No abstract provided.

Load-Balancing Rendezvous Approach For Mobility-Enabled Adaptive Energy-Efficient Data Collection In Wsns, Jian Zhang, Jian Tang, Zhonghui Wang, Feng Wang, Gang Yu

Faculty and Student Publications

Copyright © 2020 KSII The tradeoff between energy conservation and traffic balancing is a dilemma problem in Wireless Sensor Networks (WSNs). By analyzing the intrinsic relationship between cluster properties and long distance transmission energy consumption, we characterize three node sets of the cluster as a theoretical foundation to enhance high performance of WSNs, and propose optimal solutions by introducing rendezvous and Mobile Elements (MEs) to optimize energy consumption for prolonging the lifetime of WSNs. First, we exploit an approximate method based on the transmission distance from the different node to an ME to select suboptimal Rendezvous Point (RP) on the …

Revisiting Lightweight Encryption For Iot Applications: Error Performance And Throughput In Wireless Fading Channels With And Without Coding, Yazid M. Khattabi, Mustafa M. Matalgah, Mohammed M. Olama

Faculty and Student Publications

© 2013 IEEE. Employing heavy conventional encryption algorithms in communications suffers from added overhead and processing time delay; and in wireless communications, in particular, suffers from severe performance deterioration (avalanche effect) due to fading. Consequently, a tremendous reduction in data throughput and increase in complexity and time delay may occur especially when information traverse resource-limited devices as in Internet-of-Things (IoT) applications. To overcome these drawbacks, efficient lightweight encryption algorithms have been recently proposed in literature. One of those, that is of particular interest, requires using conventional encryption only for the first block of data in a given frame being transmitted. …

Cooperative Relay Selection For Load Balancing With Mobility In Hierarchical Wsns: A Multi-Armed Bandit Approach, Jian Zhang, Jian Tang, Feng Wang

Faculty and Student Publications

© 2013 IEEE. Energy efficiency is the major concern in hierarchical wireless sensor networks(WSNs), where the major energy consumption originates from radios for communication. Due to notable energy expenditure of long-range transmission for cluster members and data aggregation for Cluster Head (CH), saving and balancing energy consumption is a tricky challenge in WSNs. In this paper, we design a CH selection mechanism with a mobile sink (MS) while proposing relay selection algorithms with multi-user multi-armed bandit (UM-MAB) to solve the problem of energy efficiency. According to the definition of node density and residual energy, we propose a conception referred to …

Timcc: On Data Freshness In Privacy-Preserving Incentive Mechanism Design For Continuous Crowdsensing Using Reverse Auction, Xiaoqiang Ma, Weiwei Deng, Feng Wang, Menglan Hu, Fei Chen, Mohammad Mehedi Hassan

Faculty and Student Publications

© 2013 IEEE. As an emerging paradigm that leverages the wisdom and efforts of the crowd, mobile crowdsensing has shown its great potential to collect distributed data. The crowd may incur such costs and risks as energy consumption, memory consumption, and privacy leakage when performing various tasks, so they may not be willing to participate in crowdsensing tasks unless they are well-paid. Hence, a proper privacy-preserving incentive mechanism is of great significance to motivate users to join, which has attracted a lot of research efforts. Most of the existing works regard tasks as one-shot tasks, which may not work very …

Data Driven Synthetic Load Modeling For Smart City Energy Management Studies, Fernando Bereta Dos Reis

Electronic Theses and Dissertations

The primary aim of this dissertation is to provide synthetic residential load models with granular level information on the customers having information about the appliances that constitute each individual residential customer through time. The synthetic load model is capable of being widely utilized by the power system research community since only publicly available data is utilized for its generation. This gives researcher’s access to how the synthetic load was made and also how accurate the model is in representing real power system regions. As the title of the dissertation suggests, the synthetic residential load models are intended for smart city …

Internet Of Things For Sustainable Mining, Abdul Salam

Faculty Publications

The sustainable mining Internet of Things deals with the applications of IoT technology to the coupled needs of sustainable recovery of metals and a healthy environment for a thriving planet. In this chapter, the IoT architecture and technology is presented to support development of a digital mining platform emphasizing the exploration of rock–fluid–environment interactions to develop extraction methods with maximum economic benefit, while maintaining and preserving both water quantity and quality, soil, and, ultimately, human health. New perspectives are provided for IoT applications in developing new mineral resources, improved management of tailings, monitoring and mitigating contamination from mining. Moreover, tools …

Carbon-Based Interlayers In Perovskite Solar Cells, Aleksandr P. Litvin, Xiaoyu Zhang, Kevin Berwick, Anatoly V. Fedorov, Weitao Zheng, Alexander V. Baranov

Articles

Perovskites are solution-processed, high-performance semiconductors of interest in low-cost photovoltaics. The interfaces between the perovskite photoactive layers and the top and bottom contacts are crucial for efficient charge transport and minimizing trapping. Control of the collection of charge carriers at these interfaces is decisive to device performance. Here, we review recent progress in the realization of efficient perovskite solar cells using cheap, easily processed, stable, carbon-based interlayers. Interface materials including graphene, carbon nanotubes, fullerenes, graphene quantum dots and carbon dots are introduced and their influence on device performance is discussed.

Multi-Modal Natural Frequency Response Of Utility Transmission Tapered Wood Poles Under Various Soil Foundation Conditions: Natural Frequency Response Under Various Soil Conditions, Ramani Ayakannu, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

Studied herein is the multi-modal natural frequency response of utility transmission tapered wood poles under various soil foundation conditions. Strong winds and hurricanes in various parts of the world have resulted in collapse of such utility poles and have resulted in the disruption of electrical distribution systems in addition to creating hazardous conditions for the public. To avoid the development of resonance under such dynamic loading, the multi-modal natural vibration of the utility poles first needs to be understood in the presence of practical soil foundation conditions. To capture the soil-structure interaction effects on the multi-modal frequencies, a SAP2000 dynamic …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

2019 Fall Engr333 Project Final Report, Megan Black, Evan Block, Jacob Deysher, Zach Erickson, Peter Atma, John Macy, Paul Steenwyk, Justin Skaggs, Justin Eekhoff, Adam Marquardt, Alan Samdel, Nathan Van Wyhe, Zach Ashenfelter, Brett Ermer, Clayton Lockwood, Ryan Schierbeek, Andrew Zerull, Matthew Buist, Hannah Chilkiewicz, Nathan Hall, Holly Straup, Ivy Chipinda, Andrew Huston, Peter Oh, Tony Vander Ploeg, Josh Hallenbeck, Cameron Ilbrink, Bridget Pertzsch, Lillie Spackman, Zuber Abdella, Michael Merz, Nathan Schuten, Abigail Willson, William Benneh, Marcus Gelder, Steven Vanast, Tyler Johnson, Christopher Pappageorge, Trevor Sando

ENGR 333

Today, many institutions and individuals see energy efficiency as an important issue; reducing energy consumption is thought to decrease demand for fossil fuels and consumes energy more sustainably. However, while more efficient devices can save users both energy and money, they do not always result in less energy use as a society. This discrepancy between expected and actual energy savings is called the rebound effect. This can be a result of several factors: increased use of the device drawing more energy, manufacturers using more energy to create the new device, or money saved by the users being respent in the …

2019 Fall Engr333 Poster, Megan Black, Evan Block, Jacob Deysher, Zach Erickson, Peter Atma, John Macy, Paul Steenwyk, Justin Skaggs, Justin Eekhoff, Adam Marquardt, Alan Samdel, Nathan Van Wyhe, Zach Ashenfelter, Brett Ermer, Clayton Lockwood, Ryan Schierbeek, Andrew Zerull, Matthew Buist, Hannah Chilkiewicz, Nathan Hall, Holly Straup, Ivy Chipinda, Andrew Huston, Peter Oh, Tony Vander Ploeg, Josh Hallenbeck, Cameron Ilbrink, Bridget Pertzsch, Lillie Spackman, Zuber Abdella, Michael Merz, Nathan Schuten, Abigail Willson, William Benneh, Marcus Gelder, Steven Vanast, Tyler Johnson, Christopher Pappageorge, Trevor Sando

ENGR 333

Energy efficiency can be a worthy goal for institutions and individuals; reducing energy consumption decreases demand for fossil fuels and consumes energy more sustainably. However, more cost-effective devices can lead to behavioral changes that ultimately increase energy consumption, even though the devices themselves are more energy efficient: This called the rebound effect. Rebound occurs when less energy is saved than expected. This can be a result of several factors: increased use of the device drawing more energy, manufacturers using more energy to create the new device, or money saved by the users being re-spent in the economy. The combination of …

College Of Engineering Senior Design Competition Fall 2019, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

2019 Fall Engr333 Seminar Presentation, Ivy Chipinda, Andrew Huston, Adam Marquardt, Lillie Spackman

ENGR 333

File for student presentation, given by students in the Fall 2019 class of ENGR333.

A New Synthesized Microalloys Steel Ods Of High Amplitude Ultrasonically Irradiation, Marzuki Silalahi, Hanif Abdurrahman Wicaksana, Ferhat Aziz, Syahfandi Ahda, Mohamad Riza Iskandar

Makara Journal of Technology

Micropowders of oxide-dispersion-strengthened (ODS) steel have been synthesized using the ultrasonic irradiation method with variations in amplitude. The ultrasonic irradiation process is performed for 50 h at a frequency of 20 kHz with 40%, 50%, and 60% amplitudes in toluene solution. The formation of Fe-Cr microalloys in the preparation of Fe- 15Cr-0.5Y2O3 powder was analyzed using SEM-EDS, X-ray diffraction (XRD), and TEM-EDS. The percentage of Fe- Cr phase mass fraction of ODS steel micropowder formed during ultrasonic irradiation with 40%:50%:60% amplitude was 12.2%:34.1%:22.1%, with 25.67:77.02:38.51 nm crystallite size. The crystallite size at 50% amplitude was the largest, and the diffusion …

Comprehensive Inspection On The Experimental Ferritic Stainless Steel By Means Of Transmission Electron Microscopy And Neutron Diffraction Techniques, Parikin Parikin, Mohammad Dani, Riza Iskandar, Aziz Khan Jahja, Andon Insani, Joachim Mayer

Makara Journal of Technology

The field of physical metallurgy is one of the primary beacons that guide alloy developments for multipurpose materials such as the in-core structure materials for pressure vessel components and heat exchangers. The surface microstructure of new ferritic steel with significant local constituent materials was characterized by high resolution powder neutron diffractometer (HRPD) and transmission electron microscope (TEM), combined with the energy dispersive X-ray spectroscopy (EDX). The alloy contains73% Fe, 24% Cr, 2% Si, 0.8% Mn, and 0.1% Ni, in %wt. The charge materials were melted by the casting techniques. The neutron diffractograms obtained shows five dominant diffraction peaks at (110), …

Study On Antibacterial Of Chitosan/Hydroxyapatite Doped Magnesium Composite As A Material For Bone Graft Applications, Andromeda Dwi Laksono, Teodoro A. Amatosa, Jr., Hilda Pebrianti Octaviana Sitorus, Wentika Putri Kusuma Asih, Sulistijono Sulistijono

Makara Journal of Technology

Hydroxyapatite (HAp) is one of the constituent minerals of bone and teeth, that has been widely used for synthesizing bone graft. Due to the limitation on properties of the hydroxyapatite, it is doping with Magnesium (HAp-Mg). The addition of Chitosan (Chi) was expected to improve the antibacterial properties of HAp-Mg. The present research aims to study the influence of Chitosan with 0, 5, 15, and 25 wt% addition on biocompatibility properties of Chi/HAp-Mg composite. HAp-Mg was synthesized using the sol-gel method; meanwhile, Chi/HAp-Mg composite was manufactured by mixing Chitosan in acetic acid, and HAp-Mg was added into the mixture. The …

Evaluation Of Primal-Dual Splitting Algorithm For Mri Reconstruction Using Spatio-Temporal Structure Tensor And L1-2 Norm, Mia Rizkinia, Masahiro Okuda

Makara Journal of Technology

Magnetic resonance imaging (MRI) is an essential medical imaging technique which is widely used for medical research and diagnosis. Dynamic MRI provides the observed object visualization through time and results in a spatiotemporal signal. The image sequences often contain redundant information in both spatial and temporal domains. To utilize this characteristic, we propose a spatio-temporal reconstruction approach based on compressive sensing theory. We apply spatio-temporal structure tensor using nuclear norm, in addition to the wavelet sparsity regularization. The spatio-temporal structure tensor is a matrix that consists of gradient components of the MRI data w.r.t the spatial and temporal domains. For …

Influence Of Nh4f In Dextran Based Biopolymer Electrolytes: Conductivity And Electrical Analysis, Muhamad Hafiz Hamsan, Mohd Fakhrul Zamani Kadir, Shujahadeen Bakar Aziz, Muhammad Amirul Solihin Azha, Saifful Kamaluddin Muzakir

Makara Journal of Technology

Dextran polymer host was doped with different concentrations of ammonium fluoride (NH4F) via casting technique. In this present work, dextran-NH4F film has been employed to investigate the ionic conductivity using electrochemical impedance spectroscopy from 50 to 5 MHz. The highest room temperature conductivity is achieved at (2.33 ± 0.76) × 10-3 S cm-1 with 40 wt.% NH4F. The electrolyte is found to obey Arrhenius rule at high temperature with activation energy of 0.21 eV. Dielectric analysis has been performed to obtain better understanding on the conductivity pattern. The dielectric parameters e.g. ɛreal, ɛimag, Mreal, and Mimag have been tested as …

Acute Toxicitystudy Of Choline Based Ionic Liquids Towards Danio Rerio Fish And The Aggregation Behavior Of Their Binary Mixtures, Mansoor Ul Hassan Shah, Nasruddin Nasruddin, Suzana Bt Yusup, Muhammad Moniruzzaman

Makara Journal of Technology

Marine oil spills are effectively controlled by chemical dispersants. However, the toxicity associated with it reduce its employment in marine environment. To overcome this limitation, the acute toxicity of choline based ionic liquids was evaluated as a potential low toxic variant for oil spill remediation. Further, the aggregation behavior of the individual as well as their binary mixtures was also evaluated by employing tensiometry technique. The half-lethal concentration, LC50on zebrafish (Danio rerio) of three choline based ionic liquids showed that the studied ionic liquids (ILs) fall in the range of “practically nontoxic” ( 100-1000 mg L-1).Various micellar properties showed that …

Neutron Diffraction Study Of Multiferroic 0.6nife2o4/0.4batio3 Composite, Engkir Sukirman, Yosef Sarwanto, Syahfandi Ahda, Andon Insani

Makara Journal of Technology

Neutron diffraction study on the 0.6NiFe2O4/0.4BaTiO3 multiferroic composite has been carried out. The 0.6NiFe2O4/0.4BaTiO3 multiferroic composites have been synthesized by solid reaction method. In this study, 20 g of BaTiO3 (BTO) and 20 g of NiFe2O4 (NFO) compounds were prepared from the powder raw materials of BaO3 and TiO2 for BTO, and NiO and Fe2O3 for NFO. Furthermore, both BTO and NFO were each crushed for 5 hours using High Energy Milling (HEM). Then the BTO and NFO were calcined in the furnace at 950 °C/5 hours and 900 °C/5 hours, respectively. Both NFO and BTO precursors were manually mixed …

Fractional Order State Feedback Control For Improved Lateral Stability Of Semi-Autonomous Commercial Heavy Vehicles, Rasheed Mazen Abdulkader

Graduate Theses and Dissertations

With the growing development of autonomous and semi-autonomous large commercial heavy vehicles, the lateral stability control of articulated vehicles have caught the attention of researchers recently. Active vehicle front steering (AFS) can enhance the handling performance and stability of articulated vehicles for an emergency highway maneuver scenario. However, with large vehicles such tractor-trailers, the system becomes more complex to control and there is an increased occurrence of instabilities. This research investigates a new control scheme based on fractional calculus as a technique that ensures lateral stability of articulated large heavy vehicles during evasive highway maneuvering scenarios. The control method is …

2019 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2019 ENGR333 project focused on the energy rebound effect.

I asked the students “How much energy does energy efficiency save?”

This project resulted in a working paper and two journal articles submitted to The Energy Journal. The journal articles remain under review as of October 2023.

Customer

The customer for this project was Dr. Paul E. Brockway, University of Leeds, UK.

Combining Virtual Reality And Machine Learning For Enhancing The Resiliency Of Transportation Infrastructure In Extreme Events, Supratik Mukhopadhyay, Yimin Zhu, Ravindra Gudishala

Data

Corresponding data set for Tran-SET Project No. 18ITSLSU09. Abstract of the final report is stated below for reference:

"Traffic management models that include route choice form the basis of traffic management systems. High-fidelity models that are based on rapidly evolving contextual conditions can have significant impact on smart and energy efficient transportation. Existing traffic/route choice models are generic and are calibrated on static contextual conditions. These models do not consider dynamic contextual conditions such as the location, failure of certain portions of the road network, the social network structure of population inhabiting the region, route choices made by other drivers, …

Combining Virtual Reality And Machine Learning For Enhancing The Resiliency Of Transportation Infrastructure In Extreme Events, Supratik Mukhopadhyay, Yimin Zhu, Ravindra Gudishala

Publications

Traffic management models that include route choice form the basis of traffic management systems. High-fidelity models that are based on rapidly evolving contextual conditions can have significant impact on smart and energy efficient transportation. Existing traffic/route choice models are generic and are calibrated on static contextual conditions. These models do not consider dynamic contextual conditions such as the location, failure of certain portions of the road network, the social network structure of population inhabiting the region, route choices made by other drivers, extreme conditions, etc. As a result, the model’s predictions are made at an aggregate level and for a …

Evaluation Of The Uncertainty In Satellite-Based Crop State Variable Retrievals Due To Site And Growth Stage Specific Factors And Their Potential In Coupling With Crop Growth Models, Nathaniel Levitan, Yanghui Kang, Mutlu Özdogan, Vincenzo Magliulo, Paulo Castillo, Fred Moshary, Barry Gross

Publications and Research

Coupling crop growth models and remote sensing provides the potential to improve our understanding of the genotype x environment x management (G X E X M) variability of crop growth on a global scale. Unfortunately, the uncertainty in the relationship between the satellite measurements and the crop state variables across different sites and growth stages makes it diffcult to perform the coupling. In this study, we evaluate the effects of this uncertainty with MODIS data at the Mead, Nebraska Ameriflux sites (US-Ne1, US-Ne2, and US-Ne3) and accurate, collocated Hybrid-Maize (HM) simulations of leaf area index (LAI) and canopy light use …

A Study Of The Electron Regeneration Efficiency Of Solar Cells Fabricated Using Cmc/Pva-, Alginate-, And Xanthan-Based Electrolytes, Nur Farha Shaafi, Saifful Kamaluddin Muzakir, Bouchta Sahraoui

Makara Journal of Technology

A photovoltaic (PV) mechanism consists of three important steps, i.e., (i) electron excitation upon absorption of photon with energy higher than the bandgap of fluorophore, (ii) excited-state electron injection from the fluorophore to the pho-toelectrode, and (iii) electron regeneration from the electrolyte to the fluorophore. An efficient electron regeneration could be achieved upon fulfillment of the requirements of energy alignment, i.e., lowest unoccupied molecular orbital of fluorophore (LUMOfluorophore) > redox potential of electrolyte > highest occupied molecular orbital of fluorophore (HOMOfluorophore). This study investigated the electron regeneration efficiency of excitonic solar cells fabricated using three polymer-based electrolytes, i.e., (i) 60% carboxymethyl cellulose …

Use Of The “Dnachecker” Algorithm For Improving Bioinformatics Research, Nausheen Bhat, Ezra Bernadus Wijaya, Arli Aditya Parikesit

Makara Journal of Technology

Basic Local Alignment Sequencing Tool (BLAST) is a bioinformatics tool used for analyzing nucleotide sequences with regards to their similarity. BLAST can be found online on biological databases such as the National Center for Biotechnology Information (NCBI) and other such repositories. The mechanism of BLAST allows the target sequence to be compared with other sequences to find regions of local similarity, and thus, a comparability quotient that determines the resemblance between the sequences is created. Due to the open-platform nature of the online databanks, several sequences can be accepted with little to no interjections regarding the quality of sequence submitted. …

Study Of Ecological Design Of Residential Complexes Using Spss To Elevate Resident Satisfaction, Soheil Malekpour Kolbadinejad, V. Malekpour Ravasjan, A. Darvish

Makara Journal of Technology

This article reports the general residential satisfaction, affecting ecological factors, and their importance in area in Tehran. The collected field data was analyzed using SPSS. Cronbach's alpha variable was used to determine the reliability of the questionnaire and the Friedman test was used to assess priorities that influence residential satisfaction. The results show that the quality of residential environments and general satisfaction of their residents may be enhanced by identifying these criteria and making appropriate plans for their improvement.

Adsorption Of Heavy Metal Ions By Oil Palm Decanter Cake Activated Carbon, Mohd. Ezreeza Mohamed Yusoff, Juferi Idris, Nahrul Hayawin Zainal, Mohamad Faizal Ibrahim, Suraini Abd-Aziz

Makara Journal of Technology

Adsorption processes are widely used for the removal of heavy metals from waste streams. Oil palm decanter cake (OPDC) is used as a bioadsorbent because of its compositional properties for activated carbon production; moreover, it is a readily available raw material produced in palm oil mills and is thus abundant and cheap. In this study, the OPDC was carbonized at 700 °C and activated using steam at 700 °C to produce oil palm decanter cake activated carbon (AC-OPDC). Batch adsorption experiments were carried out to compare the adsorption capacities of the raw OPDC and the AC-OPDC for heavy metals removal. …