Civil and Environmental Engineering Commons^™

Innovative Contracting Prequalification/Selection Model Using Analytical Hierarchy Process (Ahp), Saad J. Zidan

Masters Theses

Design-Build, Cost-Plus-Time, and warranty are the three innovative contracting methods that the Federal Highway Administration (FHWA) decided to fund. FHWA allowed the usage of these methods in federally funded projects if this will result in reducing time, improving quality, and saving tax payers' money. Prequalification is recognized as the best way of assuring that contractors do have the required qualifications to deliver projects successfully. Prequalification is even more critical when low-bid selection method is used with any of the innovative contracting, since incompetent contractors may get awarded for low-bids that are not based on valid assumptions.

This study presents a …

Color Management Of Desktop Input Devices: Quantitative Analysis Of Profile Quality, Xiaoying Rong

Masters Theses

This thesis investigates the color management principle and input device profiling. The input devices discussed in this thesis are flatbed scanners.

In this thesis, the human visual system, CIE L*a*b* color space, ICC profiles are reviewed, and the evaluation of profile quality is discussed. Grayscale and standard color targets of three primary suppliers are used to create profiles for a scanner. The quantitative analyses of the quality of different profiles, created by two primary commercial profiling software, are conducted according to the Delta-E of the CIE L*a*b* color space. Finally, the relationship of different color targets and profiles for desktop …

Bs News

Building Services Engineering

No abstract provided.

Bs News

Building Services Engineering

No abstract provided.

Bs News

Building Services Engineering

No abstract provided.

An Evaluation Of Public Construction Contracting Methods For The Public Building Sector In Oregon Using Data Envelopment Analysis, Gerald Herman Williams Jr.

Dissertations and Theses

Since 1976 public agencies in Oregon have been allowed to select construction contractors using a "qualification" based competition instead of the more typical lowest responsible bid or Design-Bid-Build (DBB) basis. Since 1985, at least 136 such selections, commonly known as CM/GC for Construction Manager/General Contractor, have been made. The results of this policy have not previously been analyzed. This research compares these selection methods, seeking to answer the following questions:

1. Does the CMl/GC method result in projects that differ from DBB projects regarding cost and schedule control?

2. Are CMl/GC projects more efficient than DBB projects, where efficiency is defined as …

   ---

   Go to article

A Descriptive Performance Model Of Small, Low Cost, Diskless Beowulf Clusters, Curtis R. Nielson

Theses and Dissertations

Commodity supercomputing clusters known as Beowulf clusters, have become a low cost alternative to traditional supercomputers. Beowulf clusters combine inexpensive computers and specialized software to achieve supercomputing power. The processing nodes in a diskless Beowulf cluster do not have a local hard disk unlike the nodes in most commodity clusters. Research has provided performance information for diskless clusters built with expensive, high performance equipment. Beowulf clusters use commodity off-the-shell hardware, and little information is available about their performance. This research includes the construction of several diskless Beowulf clusters. Using the NAS Parallel Benchmarks, the performance of these clusters was measured. …

Bs News

Building Services Engineering

No abstract provided.

Bs News

Building Services Engineering

No abstract provided.

Bs News

Building Services Engineering

No abstract provided.

Bs News

Building Services Engineering

No abstract provided.

Future Housing In The United States: Senior’S Housing Demand, Sandeep Singh

Masters Theses

In the United States, persons born between 1942 and 1964 are within 10 to 15 years of traditional retirement age and are identified as baby boomers. The data shows that the number of persons aged 65 years and older have grown from 10 percent of the population in 1970 to nearly 13 percent in 1996. Furthermore, the population that is 65 years old or older is projected to be 20 percent of the population in 2030. As a result, the demographic change nurtures a demand for senior’s housing.

On the other hand, the concern is for the elderly living in …

Development Of A Redesign Plan For Moore Hall Using Architectural Principles Of Green Building And Sustainable Design, Alkhaziam Saad

Masters Theses

An existing in-use office and classroom building on Western Michigan University's main campus was chosen for a redesign project which incorporated study of architectural principles of green building and sustainable design. The study emphasized the central importance of buildings themselves in modem life, their effects on building users and their work, their effects on user relationships with one another and the surrounding environment, and the need to enhance the building's positive, natural, and life-supporting relationship with the total environment including the users.

The redesign problem statement reflected issues and ideas from recent architectural and building construction literature, which emphasized green …

Bs News

Building Services Engineering

No abstract provided.

Beyond The Big Dig, Robert Turner

New England Journal of Public Policy

For more than a decade, from the day that the decision was made to put Boston’s Central Artery underground, many forward-looking planners and designers have been conjuring up visions of the mile-long street-level corridor that would replace the elevated highway, reshaping the heart of downtown. By the end of 2001, the corridor had acquired a name, the Rose Kennedy Greenway, but work was far more advanced on the traffic tunnel underground than on the open space above. These precious twenty-seven acres had the potential to flower into a magnificent, vibrant urban oasis that would become known the world over. But …

Bs News

Building Services Engineering

No abstract provided.

A Proposed Military Construction Facility Investment Model, Andre R. Dempsey

Theses and Dissertations

The fiscal year (FY) 1999 and FY2000 National Defense Authorization Acts (NDAA) amended Title 10 USC, Section 17, and directed the secretary of defense to report annually on the capability of installations and facilities to provide support to forces in the conduct of their missions. This has come to be known as the Installations' Readiness Report (IRR). The Air Force's IRR links facility sustainment, restoration, and modernization (SRM) requirements, with the impact on the installation's ability to support the mission associated with the particular facility class. The Air Force's centralized military construction (MILCON) program model used to program major facility …

Bs News

Building Services Engineering

No abstract provided.

Rationalising The Construction Materials Purchasing Process, Louis Gunnigan, Alan V. Hore, Trevor Orr

Conference papers

This paper is concerned with the process used in locating and removing inefficiency in the construction materials purchasing process. In the first part, a case study is presented showing the build-up of costs involved in purchasing materials. Potential for substantial savings is revealed. The second part of the paper gives a status report on a rationalisation pilot project currently being undertaken by the Construction Information Technology Alliance (CITA). This project aims to show how greater effectiveness and efficiency can be applied to the administration of the construction materials purchasing process by the application of information technology already used widely in …

Scientific And Engineering Studies Of Systems, Structures, And Components Important To Safety For A Potential Repository At Yucca Mountain, Nevada, Ian Buckle, E. Manos Maragakis

Publications (YM)

TASK 26: Upgrade of Earthquake Simulation Facilities in the Large-Scale Structures Laboratory at University of Nevada Reno The objective of this Task was to purchase, install and commission the equipment necessary to upgrade two existing shake tables in the Structures Laboratory at UNR, from uniaxial to biaxial motion. It was recognized that a parallel effort, funded by NSF and HUD, to add a third biaxial table with identical properties to the upgraded existing tables, would be undertaken at the same time.

Bs News

Building Services Engineering

No abstract provided.

A Model For Integrating Construction Design And Schedule Data, Zhigang Shen, Raja R. A. Issa, William O'Brien

Department of Construction Engineering and Management: Faculty Publications

The difficulty of timely retrieval of useful information from heterogeneous data sources is a major cause of low productivity in the construction industry. The goal of this research is to provide a new methodology to handle the data-heterogeneity problems encountered in a construction project. This research proposes a tree-structured product model, which binds design knowledge, cost data and schedule data together, as a feasible solution for the data integration problem in construction projects. The methodology uses the knowledge representation of construction projects based on an ontology. Metadata are used to describe the conceptual structure of the project knowledge. The concept …

Rationalising The Construction Materials Purchasing Process, Louis Gunnigan, Alan V. Hore, Trevor Orr

Conference papers

This paper is concerned with the process used in locating and removing inefficiency in the construction materials purchasing process. In the first part, a case study is presented showing the build-up of costs involved in purchasing materials. Potential for substantial savings is revealed. The second part of the paper gives a status report on a rationalisation pilot project currently being undertaken by the Construction Information Technology Alliance (CITA). This project aims to show how greater effectiveness and efficiency can be applied to the administration of the construction materials purchasing process by the application of information technology already used widely in …

A Reflection On The Development, Activities And Deliverables Of The Construction It Alliance (Cita) In Ireland, Ken Thomas, Alan V. Hore

Conference papers

This paper reflects on the development, activities and deliverables of the Construction IT Alliance in the Republic of Ireland. This alliance was formed in 2001 with the vision of harnessing the potential of information and communication technologies in the Irish construction sector. CITA is a prime example of academia-industry-government collaboration in Ireland. A key driver in the development of CITA is the need to increase the extent of IT knowledge within the Irish construction sector. Membership of CITA includes leading architectural, engineering, surveying, management, construction, supplier, IT and academic organisations. The leading academic institutions in CITA are the Technological University …

Management Commitment To Construction Safety, Areen M. Shaar

Masters Theses

The objective of all businesses including construction is to make money and to be profitable. The costs resulting from personal injuries and equipment damage, combined with the associated financial impact resulting from schedule disruptions, insurance hikes, and workers compensation can definitely impact the profitability of any construction operation. Most times those costs can be minimized or avoided by giving safety more attention on construction job sites.

The main purpose of this research is to determine the correlation between management commitment to safety and its impacts on the frequency of injuries and illnesses. To achieve this, a survey was methodically developed …

Adaptation Of Project Finance To Small Contractor Financing, Ragunathan Venkateswaran

Masters Theses

One key reason for the poor performance of small construction establishments in securing a higher chunk of the annual project volume is funding. While construction industry does not require a large capital investment it does require a large working capital to start up the project and generate bills so that the resulting cash flow may take over the remaining funding requirements. Unfortunately for small contractors there are very limited options available from the banks or other lending institutions to cover this large working capital requirement in the absence of sufficient collateral. The "Project Finance" method, which has been used in …

An Imaging System For Concrete Bridge Inspection, Mohammed Talal Al-Bataineh

Masters Theses

Bridges are the most important element in the road network because of, the strategic position a bridge occupies, its direct impact on safety, and its high cost. Therefore, a continuous maintenance and inspection should be performed. During the past years visual inspection has been the primary method of bridge inspection.

Pontis is a comprehensive bridge management system developed as a tool to assist in the challenging task of bridge management. Pontis stores bridge inventory and inspection data and formulates network-wide preservation and improvement policies for use in evaluating the needs of each bridge in a network.

The concrete bridge inspection …

Building Deconstruction Guidelines: Tools For Recovering Building Materials, Ali Ayedh Merzen

Masters Theses

The traditional method of tearing down building when its life cycle is completed is known as demolition, which means destroying most of the structures and burying it in the landfills. This is the most common practice in most countries, but in recent years there is a new movement toward using the components of these buildings. Burying usable or recyclable materials in landfills means more pollution and increasing the need for more landfills. The concept of reusing or recycling building materials is known as Deconstruction. This practice is relatively new in the construction industry and requires more research and studies to …

Bs News

Building Services Engineering

No abstract provided.

Bs News

Building Services Engineering

No abstract provided.