Civil and Environmental Engineering Commons^™

การประยุกต์ใช้เหล็กกล่องเติมด้วยคอนกรีตกำลังสูงเป็นเสาในโครงสร้างที่พักอาศัย, พีรดนย์ ลอออรรถพงศ์

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้มีวัตถุประสงค์เพื่อศึกษาและประเมินสิทธิภาพของโครงสร้างเหล็กกล่องเติมด้วยคอนกรีตกำลังสูง (High-Strength Concrete-Filled Steel Tube, HSCFST) สำหรับการประยุกต์ใช้กับบ้านพักอาศัย อันเป็นการตอบสนองต่อปัญหาการขาดแคลนแรงงานฝีมือ การเพิ่มขึ้นของค่าแรง และความจำเป็นในการลดระยะเวลาการก่อสร้างและต้นทุน การศึกษาได้พิจารณากรณีบ้านพักอาศัยสูง 3 ชั้น จำนวน 4 หลัง โดยทำการจำลองโครงสร้างด้วยโปรแกรม ETABS เพื่อตรวจสอบพฤติกรรมการรับแรงในแนวดิ่งและแรงจากแผ่นดินไหวของโครงสร้าง ซึ่งการออกแบบเสาเหล็กกล่องเติมด้วยคอนกรีตกำลังสูงอ้างอิงมาตรฐาน AISC 360-22 (LRFD) ผลการออกแบบพบว่าสามารถลดขนาดเสาให้เล็กลงเหลือ 125 มิลลิเมตร และ 150 มิลลิเมตร เพื่อให้มีขนาดไม่เกินความหนาของผนังบ้านได้เมื่อใช้คอนกรีตที่มีกำลังรับแรงอัดสูงกว่า 60 เมกะปาสคาล ร่วมกับเหล็กกล่องชนิดที่มีจำหน่ายในท้องตลาด โดยโครงสร้างที่ได้ออกแบบทั้ง 4 หลัง พบว่ามีประสิทธิภาพในการรับน้ำหนักบรรทุกและแรงแผ่นดินไหวดีกว่าโครงสร้างคอนกรีตเสริมเหล็กแบบเดิมในทุกด้าน ทั้งยังพบว่ามีต้นทุนการก่อสร้างที่ต่ำกว่าเสาคอนกรีตเสริมเหล็กอย่างมีนัยสำคัญ นอกจากนี้ยังได้ทำการทดสอบเสาเหล็กกล่องเติมด้วยคอนกรีตกำลังสูงในห้องปฏิบัติการ เพื่อเปรียบเทียบกำลังรับแรงอัดกับค่าที่ได้จากสมการทำนายตามมาตรฐาน AISC 360-22 พบว่าค่าที่ได้จากการคำนวณมีค่าต่ำกว่าผลการทดสอบจริงค่อนข้างมาก ส่งผลให้เกิดความมั่นใจยิ่งขึ้นต่อการนำเสาเหล็กกล่องเติมด้วยคอนกรีตกำลังสูงไปใช้จริงในงานก่อสร้างบ้านพักอาศัย

Experimental Evaluation Of Corrosion Of Strands And Wires To Estimate Corrosion Rate In Grout And Concrete, Dipendra Shrestha

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Premature failure of prestressed and post-tensioned concrete structures is frequently caused by undetected corrosion of prestressing steel. Although extensive research has addressed corrosion rates in conventionally reinforced concrete, the interpretation of non-destructive parameters, such as half-cell potential (HCP) and concrete/grout resistivity, for estimating corrosion rates in prestressing steel are not adequately investigated.

This research experimentally evaluates chloride-induced corrosion of prestressing steels to establish material-specific relationships between in-situ measurable parameters and corrosion rate. Thirty-six macrocell specimens incorporating plain wires, indented wires, and seven-wire strands in structural concrete and commercial post-tensioning grout- half with pre-formed surface cracks, were subjected to accelerated cyclic …

Centralized Deep Reinforcement Learning For Homogeneous Multi-Component Maintenance Optimization, Joseph W. Wittrock

Theses and Dissertations

This thesis explores an application of reinforcement learning (RL) in maintenance optimization. Recent advances in hardware-accelerated computation and deep learning have made RL a powerful tool for solving optimization problems which are too complex for traditional methods. Maintenance optimization involves improving the efficiency and effectiveness of maintenance activities through data-driven approaches, ultimately reducing costs and increasing asset availability. Making informed maintenance decisions is crucial to long-term sustainability.

A desirable maintenance policy maximizes a utility signal while minimizing the cost of maintenance. Techniques in sequential decision making such as dynamic programming (DP) and RL have found success in optimizing these maintenance …

Coastal Flooding Along The Lower Brazos During The Landfall Of Hurricane Beryl -A Model-Based Investigation, Sabiha Tasnuva Khan

Civil Engineering Theses - Archive

Hurricane Beryl generated a complex hydrodynamic response along the Texas coast and Lower Brazos River, producing storm surge, elevated coastal water levels, intense rainfall, and widespread inundation. Low-gradient coastal rivers such as the lower portion of the Brazos River are particularly sensitive to the interaction of these drivers, yet the inland decay of surge energy and its interplay with watershed runoff remain poorly quantified. This study aims to characterize the physical mechanisms controlling water-level amplification, flow reversal, surge attenuation, and inundation development during Hurricane Beryl along the Lower Brazos and to determine the relative contributions of surge and rainfall to …

Stable Oxygen And Hydrogen Isotopic Ratios Of Precipitation And Modelling Of Precipitation Sources In Central Kentucky, Usa, 2017-2022, Ariel Gold-Mccoy

Theses and Dissertations--Civil Engineering

Our goals were to carry out analyses of a multi-year δ¹⁸O and δ²H dataset of precipitation from central Kentucky and to analyze the source of precipitation for storm events from 2017 to 2022. δ¹⁸O and δ²H were measured for 244 weekly precipitation samples collected by the National Atmospheric Deposition Program at Mackville, Kentucky, USA. Modelling precipitation source was carried out using HYSPLIT model for 414 events. Results of δ¹⁸O and δ²H from central Kentucky show: consistent seasonality, including summer highs and winter lows for δ¹⁸O and δ²H; correlation with air temperature; and …

An Investigation Of The Legitimacy Of The Underlying Assumptions Of The Scs Curve Number Method By Application To Actual Urban Watersheds, Robert K. Peterson

Theses and Dissertations--Civil Engineering

The Soil Conservation Service (SCS) Curve Number (CN) method is widely used to estimate direct runoff, and its TR-55 urban-adapted Curve Numbers are commonly applied in stormwater design. However, the underlying assumptions of the method have been the subject of contemporary review, and concerns remain that these values underestimate runoff in actual urban watersheds. This study evaluates the performance of TR-55 CNs using rainfall–runoff data from twenty real-world urban watersheds in the National Stormwater Quality Database.

Empirical Curve Numbers were derived using two calibration techniques, the asymptotic CN method (CN∞) and a nonlinear least-squares optimization method (CN_LS), and …

Earthquake Wrangler: Leveraging Ios Technology For Earthquake Detection And Early Warning Application To Enhance Public Safety., Luis F. Salome

Theses and Dissertations--Civil Engineering

Earthquakes are devastating natural phenomena and generate secondary hazards such as tsunamis, landslides and fires. Their catastrophic impacts span both developed nations including the United States, Japan, Turkey, and Italy and developing countries such as El Salvador, Haiti, Nepal and the Philippines, where disparities in early warning infrastructure remain important. Seismic events start with stress waves generated by tectonic plate motion, with body waves (P- waves and S-waves) and surface Rayleigh and love waves that carry energy through the earth. While some regions have adopted advanced early warning systems based on seismic hazard models and strong ground motion analysis, others …

Harmful Algal Bloom Prediction Modeling In The Face Of A Changing Climate, Jordan E. Spears

Theses and Dissertations--Civil Engineering

Harmful algal blooms (HABs) in rivers pose significant threats to drinking water quality and public health, yet the predictive understanding of their proliferation remains limited, particularly regarding the influence of flow conditions in large rivers. This thesis addresses the critical knowledge gap of the relationship between seasonal flow variability and HAB proliferation in the Ohio River, with the Markland Pool serving as the primary study site. This study quantified the impact of early summer high flow events (>7500 m³ s^-1) and late summer to early fall low flow conditions (< 1500 m³ s^-1) by integrating …

Development Of Generalizable Data-Driven Traffic State Prediction Solutions: A Comprehensive Approach, Md Mobasshir Rashid

Graduate Thesis and Dissertation post-2024

Increased urbanization and population growth lead to more traffic in the transportation system, causing severe congestion. Particularly during disruptive events such as hurricanes or traffic incidents, the traffic flow in the network worsens significantly. As a result, there is a need for data-driven traffic prediction models to reduce congestion in real-time, and the prediction model should be generalizable to be applicable across different dynamic scenarios. Additionally, a robust and adaptable traffic prediction model can help traffic managers to take proactive actions to optimize traffic flow. However, the majority of data-driven traffic prediction models suffer from limited applicability as they are …

Gfrp Reinforced Bridge Barriers: Experiment Testing, Manish Kumar Gadhe

Masters Theses

This study focused on evaluating the performance of concrete bridge barriers reinforced with Glass Fiber Reinforced Polymer (GFRP) compared to those reinforced with conventional mild steel. Four full-scale barriers were constructed, three using GFRP bars as the reinforcement and one with mild steel reinforcement. These were cast on two concrete slabs to ensure consistent support conditions. The use of GFRP aims to address durability concerns associated with steel reinforced concrete (RC), particularly corrosion of these bars in harsh environments.

To simulate real-world impact scenarios, a weighted cart was launched at each barrier using a guided sled system. Sensors, including load …

Prioritizing Amd Impaired Watersheds For Watershed-Scale Restoration Using Multi-Criteria Decision Analysis, James Nicholas Marino

Graduate Theses, Dissertations, and Problem Reports (ETD)

Acid Mine Drainage (AMD) remains a significant environmental challenge in coal-mining and hard rock regions like West Virginia, degrading water quality and ecosystem health. Traditional site-specific remediation efforts often prove inefficient in addressing AMD at large scale. This study explores watershed-scale restoration as a more effective solution, leveraging centralized treatment facilities and multi-source pollution management. This study will follow Multi-criteria Decision Analysis (MCDA), specifically the Analytical Hierarchy Process (AHP), to develop a structured rubric for grading watersheds. The process involves identifying critical criteria, organizing them into a hierarchy, and generating weights for clusters of criteria through collaboration with decision makers. …

Citizen-Centric Building Energy Retrofits: Understanding And Supporting Citizens As Occupants, Participants, Decision-Makers, And Learners In Home Energy Retrofits, Nikhil Singh Yaduvanshi

Civil Engineering Dissertations - Archive

Residential building retrofits remain significantly under-adopted despite substantial technological advances, economic incentives, and policy efforts, creating a critical gap between technical potential and actual implementation in achieving climate goals. Assessment of citizen involvement in building retrofit processes plays a critical role in formulating effective home retrofit program designs to ensure maximum adoption rates and avoid energy waste. Although, existing retrofit programs and decision-making models recognize the importance of citizen involvement, the extent of citizen capabilities and the effects of citizen-centered approaches on retrofit adoption and building performance has not been comprehensively examined. The adoption and success of retrofit programs depends …

Assessment Of The Feasibility Of Utilizing Plastic Waste In Infrastructure To Promote Circular Economy In Bangladesh, Md Lutfor Rahman

Civil Engineering Dissertations - Archive

This study presents a comprehensive assessment of municipal solid waste (MSW) and plastic waste characterization across Bangladesh, with a focus on circular economy opportunities and the long-term economic viability of plastic road. Using on-site waste characterization data for 13 major cities from four geographic zones of Bangladesh —Northwest, Northeast, Southwest, and Southeast—the research identifies food waste as the dominant component of the national waste stream (67.3%), followed by plastic (12.4%), textiles (7.8%), and paper (4.7%). Among plastics, low-density polyethylene (LDPE) overwhelmingly dominates (89.7%), highlighting the continued prevalence of single-use flexible plastics.

A life cycle cost analysis (LCCA) was conducted comparing …

Implementation And Performance Evaluation Of Plastic Road Mix Design In Parking Lot, Ishraq Faruk

Civil Engineering Dissertations - Archive

The uncontrolled proliferation of plastic waste has emerged as a global environmental crisis, with high-density polyethylene (HDPE) constituting a substantial fraction of the waste stream due to its extensive use in packaging and its resistance to degradation. In parallel, asphalt pavements particularly in urban infrastructure such as parking lots experience accelerated deterioration from raveling, rutting, and cracking as a result of thermal cycling, repetitive loading, and inadequate drainage. These converging challenges present an opportunity for innovative, circular-economy-based sustainable pavement technologies that simultaneously improve surface durability and mitigate plastic waste accumulation.

This research investigates the full-scale implementation and monitoring of HDPE …

Leveraging Product And Process Characteristics Across The Concrete Pavement Life Cycle To Integrate Global Warming Potential Into Project Procurement Processes, Michelle Annette Cooper

Dissertations, Master's Theses and Master's Reports

The objective of this research is to support sustainable procurement of concrete pavements by linking materials-level global warming potential (GWP) to the project-level. Infrastructure owners require reliable environmental product declarations (EPDs) and methodologies for integrating GWP into the procurement process to ensure equitable decision-making. This work provides insights into current EPD reliability by assessing the sensitivity of concrete GWP to materials-level contributors to recommend a level of supply chain specificity needed to effectively communicate GWP. A benchmarking methodology was developed and implemented to establish reference values for procuring sustainable products. Having provided evidence towards EPD reliability, this work presents a …

Ansi Z97 Impact Testing Of Thin Glass, Justin P. Anthony

Dissertations, Master's Theses and Master's Reports

To determine whether thin glass constructions can pass Z97 impact test to qualify as safety glass an extensive protocol was performed. Constructions including monolithic, chemically strengthened, filmed, laminated, and triple pane insulated glass units comprised of thin glass ranging in thickness between 0.50 mm and 1.6mm were evaluated. Test results indicate annealed specimens, and laminated specimens performed similar to constructions with 3 mm and 6 mm glass. Specimens with 0.2 mm film consistently performed as safety glass for thicknesses between 0.7 mm and 1.6 mm and similar performance for specimens with 0.1 mm film with thickness of 1.1 mm and …

Life Cycle Assessment And Life Cycle Cost Assessment Of A Floating Treatment Wetland In A Wastewater Lagoon Located In Copper Harbor, Michigan, Erin Browne

Dissertations, Master's Theses and Master's Reports

A full-scale floating treatment wetland was implemented in a wastewater treatment lagoon in Copper Harbor, Michigan. Copper Harbor is a small, rural community located in a cold climate. Many studies have focused on the performance of floating treatment wetlands in mesocosm studies in warmer climates, but there is not a lot of research conducted on the feasibility and performance of full-scale floating treatment wetlands in wastewater lagoons, specifically in cold climates. The 2024 treatment season was the first season with the floating treatment wetland implemented in the wastewater lagoon. A preliminary assessment of the cost and environmental impacts of a …

Estimating Unconfined Compressive Strength (Ucs) Of Rocks From Measurement While Drilling (Mwd) Data, Can Erdem

Dissertations, Master's Theses and Master's Reports

Measurement-while-drilling (MWD) technology enables the real-time monitoring of drilling parameters during the drilling process. MWD data can provide valuable insight into the mechanical behavior of intact rocks and rock masses, which is essential for geotechnical applications such as foundation design and underground construction. The aim of this study is to correlate real-time drilling parameters, recorded using a laboratory-developed MWD system, with the unconfined compressive strength (UCS) of rocks. A custom laboratory MWD system was designed to simultaneously record four key drilling parameters: thrust (axial force, crowd), torque, penetration rate, and rotational speed. The custom-built MWD system was used to continuously …

Performance And Environmental Impact Of Waste Glass Asphalt In Cold Regions, Kai Xin

Dissertations, Master's Theses and Master's Reports

The reuse of waste glass in asphalt mixtures has significant potential in sustainable pavement engineering, yet its performance under cold, freeze–thaw conditions remain underexplored. This dissertation presents a first-of-its-kind comprehensive evaluation of glass asphalt for cold regions, simultaneously assessing its low-temperature cracking resistance, moisture susceptibility, field performance, and life-cycle environmental impacts. A series of laboratory tests were performed on asphalt mixtures incorporating various proportions of crushed waste glass aggregate, including Disk-Shaped Compact Tension (DCT) and Indirect Tensile (IDT) tests for low-temperature fracture resistance, and Tensile Strength Ratio (TSR) and Hamburg Wheel Tracking (HWTT) tests for moisture damage and rutting susceptibility. …

Enhancing Operational Efficiency Of Paratransit Services Using Predictive Models, Troyee Saha

Civil Engineering Dissertations - Archive

Paratransit services play a vital role in supporting the mobility of older adults and individuals with disabilities, yet they experienced major disruptions during the COVID-19 pandemic and continue to face ongoing operational issues such as trip cancellations. This dissertation explores these challenges through three distinct analyses using data from Arlington, TX. The first chapter investigates how COVID-19-related factors (policies, cases, and vaccination) and socio-demographics influenced paratransit usage from 2019 to 2021. Applying SARIMAX and Poisson regression models, the study finds a substantial drop in ridership—41% in 2020—and a shift toward essential medical travel. It also reveals that restrictive policies, such …

Development Of Supervised Machine Learning-Based Life-Cycle Cost Estimation And Prediction Models For Comparative Sewer System Rehabilitation Using Open-Cut And Trenchless Cured-In-Place Pipe Methods, Gayatri R. Thakre

Civil Engineering Dissertations - Archive

Aging wastewater infrastructure in the United States demands renewal strategies that balance cost-effectiveness, sustainability, and minimal social disruption. Conventional open-cut pipeline installation (OCPI) involves extensive excavation and restoration, whereas trenchless alternatives such as Cured-in-Place Pipe (CIPP) Renewal Technology offer reduced surface disturbance and environmental impacts. However, existing studies primarily focus on Construction Costs (CC), neglecting integrated life-cycle evaluations that also account for Environmental Costs (EC) and Social Costs (SC).

The primary objectives of this research are to develop supervised machine-learning (ML) models to estimate and predict CC in 2025 US dollars (USD) per linear foot of OCPI and CIPP Renewal …

Development Of A Drone-Assisted Pavement Management Framework Based On The Pavement Condition Index For University Parking Lots, Omesh Pasuluru

Civil Engineering Theses - Archive

Efficient pavement management is essential for keeping university parking lots in good condition. At the University of Texas at Arlington, parking areas experience heavy use and environmental wear, which can cause damage if not addressed early. Traditional methods for assessing pavement conditions are time-consuming, interrupt daily activities, and are expensive. Hence, there is a need for better solutions. This study introduces a drone-based pavement management approach that uses the Pavement Condition Index (PCI) system. The PCI is a numerical scale from 0 to 100 that rates pavement quality based on surface condition. A high PCI score (85-100) indicates the pavement …

Structural Performance Of High-Rise Rc Buildings With Sfrc Columns And Shear Walls Subjected To Seismic Loading, Ali Azzawi

Civil Engineering Theses - Archive

To investigate the seismic performance of high-rise RC buildings with steel fiber reinforced concrete (SFRC) columns and shear walls, a detailed numerical analysis was established using RISA-3D software on twelve-story RC buildings subjected to earthquakes. The variables included in this research are steel fiber volume fraction (SFVF), number of stories with SFRC columns and shear walls, and concrete strength grade. The mechanical properties of the concrete for each mix are evaluated experimentally. Three types of concrete mix designs were performed in the Civil Engineering Laboratory Building (CELB) using different dosages of steel fibers (0, 25lb/cy, and 70lb/cy). The properties of …

Investigation Of Aluminum Hollow Shapes Subject To Torsion, Nora Frederick

Honors Theses

This research investigates the torsional strength of hollow aluminum shapes, specifically fairly stocky square and circular cross-sections made from 6061-T6 alloy. A total of six cross-sections were tested, with six specimens for each cross-section, resulting in 36 tests. Torque and angular deformation data were recorded for each specimen to determine the torque corresponding to full- yield of the cross-section. Additionally, Strand7 finite element models were created to simulate the experimental results and assess whether the torsional behavior could be accurately replicated through numerical analysis. This allows for future research to be conducted using Strand7 or similar finite element software.

The …

Using Electro-Peroxone Process To Remediate Soil Contaminated With Phenol, Elaheh Faghih Nasiri, Farhad Qaderi, S. Mustapha Rahmaninezhad

Civil Engineering Faculty Publications

Industrial processes are among human activities that cause production of a large volume of wastewater containing organic pollutants such as phenol and its derivatives. Soil remediation is crucial for enhancing environmental quality for both humans and other living organisms. This study investigate the use of an electro-peroxone system to remove environmental pollutants from soil. In conjunction with ozonation, the study employed electrochemically generated hydrogen peroxide using a carbon electrode, addressing concerns about transportation and storage. Experiments were structured using response surface methodology (RSM) with three variables: ozone dosages ranging from 4 to 8 l/h, initial pollutant concentrations from 20 to …

Experimental And Simulation Of Compression After Impact (Cai) Tests For Thermoplastic Composite Materials, M. M. Shahzamanian, Sydney Houck, Li Ai, Md Mushfiqur Rahman Fahim, Sourav Banerjee, Wout De Backer, Paul Ziehl

Civil Engineering Faculty Publications

Damage caused by low velocity impacts in composite materials may go undetected, resulting in significant damage being unnoticeable. This phenomenon has been studied using experiments and simulations on a typical composite material, Toray T1225 LM-PAEK UD Tape, following impacts with varying energy levels. To the authors’ knowledge, there is a lack of information on thermoplastics and compression after impact (CAI) in the publicly available literature, and there have been insufficient results and discussions regarding CAI tests on thermoplastic composite materials at the relatively high levels of impact used, especially with the rise in the use of thermoplastic materials for the …

Hydronic Parking Lots: A Solution For Urban Heat Island Mitigation, Sumeet Jinnappa Paramaj

Theses and Dissertations

The Urban Heat Island (UHI) effect has emerged as a critical challenge in modern cities. It contributes to elevated local temperatures, placing significant stress on urban ecosystems and public health. One of the primary drivers of this phenomenon is the widespread use of impervious surfaces, such as dark-colored parking lots, which absorb heat during the day and gradually release it at night. This ongoing cycle results in persistently warmer urban environments. As cities continue to expand and densify, the need for effective, sustainable strategies to reduce urban heat becomes increasingly urgent.

This project aims to explore innovative interventions, particularly in …

Framework To Guide The Review And Update Of Wvdoh Schedule Review Practices And Specifications, Myles Joshua Avery

Graduate Theses, Dissertations, and Problem Reports (ETD)

Roadway and bridge construction projects are often complex, necessitating high quality schedules to ensure the work is completed on time and within budget. The West Virginia Division of Highways (WVDOH) utilizes scheduling procedures and policies outlined within the Prosecution and Progress section of its Standard Specifications for Roads and Bridges to ensure timely and cost-effective project deliveries. Recently, concern has risen that the existing language within this section is outdated and fails to cater to modern scheduling techniques, technologies, and industry practices. In turn, WVDOH personnel question whether schedules that follow the existing specifications align with the complexities, types, values, …

In-Plane Shear Stiffness Of Stay-In-Place Forms And Bracing Effects On The Torsional Stability Of Press-Brake-Formed Tub Girders, Ethan L. Host

Graduate Theses, Dissertations, and Problem Reports (ETD)

Press-brake-formed tub girders have welded internal angle bracing that is believed to be necessary for torsional stability under eccentric loading. However, this bracing creates fatigue weld hotspots overtime, which are subject to cracking. This study was performed to assess the torsional behavior of the Valmont U12 press-brake-formed tub girder (PBFTG) under various configurations using finite element analysis (FEA) modeling and experimental laboratory testing. The primary objective was to (1) determine the necessity of various angle bracing throughout the beam, and the effects removing said braces has on the torsional stiffness of the girder and (2) investigate the use of stay-in-place …

Dynamic Modulus Of Sbs-Modified Asphalt Mixtures Added With Ground Tire Rubber Content, Azharul Islam

College of Graduate Studies: Theses & Dissertations

The study investigates the improvement of the dynamic shear modulus in the base and styrene butadiene styrene (SBS) modified asphalt mixture by accumulating varying amounts of ground tire rubber through an Asphalt mixture performance tester (AMPT). This thesis specifically explores how different percentages of ground tire rubber (GTR) influence the mechanical properties and durability of the asphalt mixture articulated with two grades, PG 64-22 and PG 76-22. The experimental framework consisted of preparing asphalt mixtures blended with 10% to 15% of the binder for PG 64-22 and 3% to 8% of GTR for PG 76-22. The laboratory testing involved using …