Civil and Environmental Engineering Commons^™

Audio-Based Productivity Forecasting Of Construction Cyclic Activities, Chris A. Sabillon

College of Graduate Studies: Theses & Dissertations

Due to its high cost, project managers must be able to monitor the performance of construction heavy equipment promptly. This cannot be achieved through traditional management techniques, which are based on direct observation or on estimations from historical data. Some manufacturers have started to integrate their proprietary technologies, but construction contractors are unlikely to have a fleet of entirely new and single manufacturer equipment for this to represent a solution. Third party automated approaches include the use of active sensors such as accelerometers and gyroscopes, passive technologies such as computer vision and image processing, and audio signal processing. Hitherto, most …

Long-Period Fiber Grating Corrosion Sensors For Life-Cycle Monitoring And Assessment Of Reinforced Concrete Structures, Yizheng Chen

Doctoral Dissertations

"This study aims to: (1) explore, develop, calibrate and validate Fe-C coated, long period fiber grating (LPFG) sensors for short-term mass loss measurement of the Fe-C coating; (2) develop, calibrate, and validate steel tube-encapsulated, fiber optic probes and LPFG sensors for long-term mass loss detection of the steel tube; (3) correlate the corrosion process of packaging metal materials with that of steel bars in direct contact with the packaged probe or sensor except for a thin insulation tape; and (4) apply both types of corrosion sensors into reinforced concrete (RC) structures for reinforcing bar corrosion monitoring and structural condition assessment. …

Smart Rocks For Bridge Scour Monitoring -- Design And Localization Using Electromagnetic Techniques And Embedded Orientation Sensors, Andro Radchenko

Doctoral Dissertations

"River bridge scour is an erosion process in which flowing water removes sediment materials (such as sand, rocks) from a bridge foundation, river beds and banks. As a result, the level of the river bed near a bridge pier is lowering such that the bridge foundation stability can be compromised, and the bridge can collapse. The scour is a dynamic process, which can accelerate rapidly during a flood event. Thus, regular monitoring of the scour progress is necessary to be performed at most river bridges. Present techniques are usually expensive, require large man/hour efforts, and often lack the real-time monitoring …

Novel Applications Of Pulse Pre-Pump Brillouin Optical Time Domain Analysis For Behavior Evaluation Of Structures Under Thermal And Mechanical Loading, Yi Bao

Doctoral Dissertations

"This study aims to: (1) develop an analytical model for the strain transfer effect of distributed fiber optic sensors in a uniform or non-uniform stress field; (2) develop a measurement approach to monitor strains in concrete and detect damage (e.g. crack and delamination) in bonded and unbonded concrete overlays; (3) characterize the strain and temperature sensitivities of distributed fiber optic sensors at elevated temperatures; (4) develop a thermal annealing approach to enhance the thermal stability and temperature sensitivity of the distributed sensors; and (5) apply the distributed sensors to assess structural behaviors of concrete and steel structures exposed to fire. …

Characterization And Performance Of Eco And Crack-Free High-Performance Concrete For Sustainable Infrastructure, Iman Mehdipour

Doctoral Dissertations

"The main objective of this study is to develop, characterize, and validate the performance of a new class of environmentally friendly, economical, and crack-free high-performance concrete referred to as Eco and crack-free HPC that is proportioned with high content of recycle materials. Two classes of Eco-HPC are designed for: (I) pavement (Eco-Pave-Crete); and (II) bridge infrastructure (Eco-Bridge-Crete). Eco-HPC mixtures were designed to have relatively low binder content up to 350 kg/m³ and develop high resistance to shrinkage and superior durability. A stepwise mixture design methodology was proposed to: (i) optimize binder system and aggregate skeleton to optimize packing density …

High-Volume Recycled Materials For Sustainable Transportation Infrastructure, Seyedhamed Sadati

Doctoral Dissertations

"The objective of this study is to investigate the feasibility of using high performance concrete made with high-volume of recycled materials in transportation infrastructure. The main focus was to develop mixtures for rigid pavement construction. A variety of fine and coarse recycled concrete aggregates (RCA) were investigated. The feasibility of replacing 50% of Portland cement with industrial by-products and supplementary cementitious materials (SCMs) was also evaluated. Experimental program was conducted to quantify the effect of concrete mixture design and RCA characteristics on mechanical properties, drying shrinkage, cracking potential, and durability of concrete. The development of a database and analysis using …

Durability Behavior Of Fiber Reinforced Polymer And Steel Reinforced Polymer For Infrastructure Applications, Wei Wang

Doctoral Dissertations

"Crack development in reinforced concrete (RC) structures is common in elements such as bridge decks. However, these cracks can impose significant problems over time, because they allow chlorides from deicing chemicals to infiltrate concrete which will then corrode steel bars as RC structures are exposed to harsh weather. In the last decade, composite reinforcement systems are internally or externally applied to concrete structures instead of traditional steel reinforcing bars, or to strengthen concrete elements in flexure and shear. However, studies regarding the long-term durability performance of composite reinforcement systems is limited. Therefore, in order to popularize the application of these …

Design And Performance Of Cost-Effective Ultra-High Performance Concrete For Prefabricated Elements, Weina Meng

Doctoral Dissertations

"This study presented in this thesis aims to: (1) develop a mixture design methodology for cost-effective ultra-high-performance concrete (UHPC) incorporating high volume of supplementary cementitious materials and conventional concrete and masonry sands; (2) developed UHPC with adapted rheology incorporating lightweight sand, hybrid fibers, and nanomaterials with improved properties; (3) design prefabricated UHPC panels with fiber-reinforced polymers (FRP) for enhanced flexural properties of stay-in-place panels made with optimized UHPC; and (4) explore potential applications of such UHPC elements. The proposed design methodology produced UHPC mixtures with 28-days compressive strengths higher than 125 and 168 MPa under standard water curing and 1-d …

Development Of Disaster Management In Turkey: From 1999 Kocaeli Earthquake To 2011 Van Earthquake, Mert Tolon, Kağan Cenk Mızrak

Civil Engineering Faculty Publications

The natural disasters that have occurred in Turkey are categorized as % 61 earthquakes, followed by landslides, floods, rock falls, fires and storms. Between the years of 1903 and 2000, there have been nearly 150 earthquakes in Turkey which led to damage and this is a challenge for Turkey. The management and plans of these natural disasters in Turkey were first developed in 1959. In 1999, with the magnitude of 7.4, The Kocaeli and Duzce earthquakes affected a region of Turkey that constitutes % 23 of the country’s population. After that, in 2000 necessary laws have been prepared and enacted. …

Optimising The Performance Of Cement-Based Batteries, Aimee Byrne, Shane Barry, Niall Holmes Dr., Brian Norton

Articles

The development of a battery using different cement-based electrolytes to provide a low but potentially sustainable source of electricity is described. The current, voltage, and lifespan of batteries produced using different electrolyte additives, copper plate cathodes, and (usually) aluminium plate anodes were compared to identify the optimum design, components, and proportions to increase power output and longevity. Parameters examined include water/cement ratio, anode to cathode surface area ratio, electrode material, electrode spacing, and the effect of sand, aggregate, salts, carbon black, silica fume, and sodium silicate on the electrolyte. The results indicate that the greatest and longest lasting power can …

Seismic Retrofit Case Study Of Reinforced Concrete Bridges With Buckling Restrained Braces, Michael K. Miotke

Civil and Environmental Engineering Master's Project Reports

Many highway bridges in Oregon have been designed with minimal considerations for seismic hazard and are in need of retrofit. Although buckling restrained braces (BRBs) are not necessarily a new concept, using them to seismically retrofit bridges is. This case study investigates the BRB retrofit concept as compared to traditional retrofit measures for a sample of typical vulnerable bridges in Oregon. The objectives of evaluating these cases were to determine the feasibility of the concept both in terms of performance as well as construction costs. This study builds on the ongoing research at Portland State University into the development of …

An Investigation Of The Hydraulics In A Prototype Pool-And-Chute, Vortex Weir Fishway For Anadromous Fish Passage., Brendan Foster

Cal Poly Humboldt theses and projects

This thesis presents the hydraulic characteristics and simulated passage efficiency of a hybrid pool-and-chute, vortex weir fishway designed by Michael Love & Associates. A physical 1:15 scale model was constructed and evaluated at an 8% slope over three prototype flow rates representing high and medium fish passage flows. The highest velocities and turbulent kinetic energy (TKE) values were concentrated along the fishway centerline at the high and medium flow rate and the pool sides showed lower velocities and TKE. Large eddies spin laterally and longitudinally throughout each pool. The velocity vector directions at the lowest flow rate measured differed from …

A Validated Tropical-Extratropical Flood Hazard Assessment For New York Harbor, Philip M. Orton, T. M. Hall, Stefan A. Talke, Alan F. Blumberg, Nickitas Georgas, S. Vinogradov

Civil and Environmental Engineering Faculty Publications and Presentations

Recent studies of flood risk at New York Harbor (NYH) have shown disparate results for the 100 year storm tide, providing an uncertain foundation for the flood mitigation response after Hurricane Sandy. Here we present a flood hazard assessment that improves confidence in our understanding of the region's present-day potential for flooding, by separately including the contribution of tropical cyclones (TCs) and extratropical cyclones (ETCs), and validating our modeling study at multiple stages against historical observations. The TC assessment is based on a climatology of 606 synthetic storms developed from a statistical-stochastic model of North Atlantic TCs. The ETC assessment …

Input Parameters In Discrete Element Modeling, Seyedali Yousefi

Civil Engineering ETDs

The discrete element method (DEM) is employed to study complex behaviors of particulate media. Input parameters may greatly affect the response of DEM models and should therefore be selected carefully. Scaling techniques are employed to enlarge prohibitively small time-steps. To study these techniques, dimensionless input parameters were defined. Responses of models in the dimensionless scale were invariant with choice of density, elastic modulus, and characteristic length if the dimensionless parameters were kept constant. Hence, density scaling is equivalent to use of a higher strain-rate, and stiffness scaling results in a higher strain-rate and an elevated stress state in the dimensionless …

Solar Urban Planning: Addressing Barriers And Conflicts Specific To Renewable Energy Policy And The Current Field And Practice Of Urban Planning Within The Context Of A Changing Climate, Toryl P. Hanna

Capstone Collection

The world is in a period of rapid urbanization while experiencing unprecedented rise in global temperature as a result of climate change. Questions have been raised as to how strategies for urbanization will be able to address the fetish for energy, while halting carbon emissions produced by traditional energy sources for urban inhabitants around the world. First, this paper seeks to look to cities, at the intersection of solar energy and the field of urban planning, looking into the opportunities and challenges that are currently surfacing. Conflicts and barriers in traditional urban land use patterns emerge as a topic of …

The Impact Of Project Delivery Methods On Dispute Occurrence In Public Highway Projects, Samaneh Nasrollahi, Ghada M. Gad, Alan Atalah

Master of Technology Management Plan II Graduate Projects

The construction industry is a complex and competitive industry in which different participants with different expertise, talents, and levels of knowledge work together to achieve their objectives and complete a project. Sine different participants with different interest involve in a construction project, therefore, conflicts arise and become inevitable. Conflicts in projects will cause an adversarial environment which result to disputes. Hence, if conflicts are not well managed and resolved in a timely manner, they quickly turn into disputes, which prevent the successful completion of the construction project, in terms of cost and time, and increasing the potential for poor project …

Hydraulic And Hydrologic Properties Of The Sabine River, Annie L. Bryant

Civil Engineering Theses

The Sabine River is located in Northeast Texas and is home to many threatened and endangered species as well as a growing human population. It is important to understand channel properties and flow characteristics of rivers in order better manage these important natural resources. The Sabine was monitored for hydraulic and hydrological properties as this is a poorly understood river at this point in time.

Hydraulic modeling was conducted to determine channel velocities and shear stresses during different storm frequencies. It was found that velocity and shear stress had a direct relationship at lower velocities. A comparison of existing Geographic …

Lucidpipe™ Power System, Purdue Ect Team

ECT Fact Sheets Archive

In most gravity fed water transmission pipelines, it is desired to reduce excess pressure head to prevent undue strain on a pipeline and lower the incidence of leaks. Normally this is done with pressure reducing valves that essentially burn off this excess pressure as heat. The LucidPipe™ system converts it to low cost electricity thereby removing unwanted pressure and generating energy at the same time - energy that can be put used behind the grid or put back on the grid. The LucidPipe™ system extracts a small percentage of pressure head providing nearly invisible operation allowing water operators to fulfill …

I-94 Advanced Bridge Replacement, Saleem Alsharari

Honors Theses

The Michigan Department of Transportation has always felt the need of improving and increasing the capacity of the most critical highway in the state of Michigan, I-94. Part of the improvement plan is to increase the capacity of a 6-mile segment along a corridor of I-94 from French Avenue to Trumbull Avenue which is in a suburban neighborhood of Detroit. There are eight bridges built in the 1950’s that need to be re-constructed for a capacity increase. Vehicular and non-motorized traffic must be accounted for in the design of these bridges. The project is intended to increase the service life …

Total Bridge Replacement Of M-13 Over Cheboyganing Creek, Daniel Burns

Honors Theses

The Michigan Department of Transportation sought a proposal consisting of design and construction engineering services for the total bridge replacement of M-13 over Cheboyganing Creek. The M-13 Bridge Project is located on M-13 over Cheboyganing Creek on the Saginaw River in Portsmouth Township, Bay County, Michigan.

Several components of the existing bridge have been rated in poor or serious condition on the National Bridge Inventory rating scale. A total bridge replacement is required and aligns with MDOT strategies to address critical infrastructure needs in the state as well as the Bay Region's five-year plan for managing bridge and culvert infrastructure. …

Expression And The Functional Study Of Fusion Proteins Α-Amylase And Hemolysin- Αas An Application In Biofilm Polysaccharide Degradation, Gede Yuda Sugiarta, Anggoro Wiseso, Siska Yuliana Sari, Etri Dian Kamila, Vanessa Geraldine, Diana Christina, Muhammad Hanifi, Dwiantari Satyapertiwi, Robby Hertanto, Budiman Bela, Masafumi Yohda, Muhamad Sahlan

Makara Journal of Technology

Biofilm is an aggregate of consortium bacteria that adhere to each other on a surface. It is usually protected by the exopolysaccharide layer. Various invasive medical procedures, such as catheterization, endotracheal tube installation, and contact lens utilization, are vulnerable to biofilm infection. The National Institute of Health (NIH) estimates 65% of all microbial infections are caused by biofilm. Periplasmic α-amylase (MalS) is an enzyme that hydrolyzes α-1, 4- glicosidic bond in glycogen, starch, and others related polysaccharides in periplasmic space. Another protein called hemolysin-α (HlyA) is a secretion signal protein on C terminal of particular peptide in gram negative bacteria. …

Design Of The Human Assembly Strategy In A Self-Optimizing Assembly Cell: A Case Study Of Indonesians, Novie Susanto, Ratna Purwaningsih, Kharisma Panca Kurniawati

Makara Journal of Technology

This paper presents a continuing study of the human cognitive aspect application in the technical systems. The last studies design a human-centered design based on the German culture. The result shows a significant difference of human performance between Germans and Indonesians. Therefore, this study examines the human cognitive model based on Indonesian culture to investigate whether the different cognitive model based on the culture aspect can improve the human performance. The study was conducted on 60 people classified by age, young (16-34 years old) and old (older than 34 years old). Participants render predictions on an assembly activity for two …

Optimizing Supply Chain Collaboration Based On Agreement Buyer-Supplier Relationship With Network Design Problem, Wahyudi Sutopo, Ayu Erliza, Arien Heryansyah

Makara Journal of Technology

In recent years, the rising competitive environment with shorter product life cycles and high customization forces industries to increase their flexibility, speed up their response, and enhance concurrent engineering designs. To integrate these prospects, supply chain collaboration becomes a pertinent strategy for industries to strengthen their competitiveness. The network design problem is used to implement supply chain collaboration. In the buying and selling process, sharing information between buyer and supplier are important to obtain a transaction decision. The optimimum supply chain profit can be identified by mathematical model of network design problem. The Mathematical Model takes into consideration the uncertainity …

Effect Of Milling On The Densification Of Sic-Basedcomposites From Polysilazane, Alfian Noviyanto, Toshiyuki Nishimura

Makara Journal of Technology

High density SiC-based composites from polysilazane were fabricated by high energy milling and hot pressing. After cross-linking at 200 °C, the polysilazane was pyrolysed at 1000 °C in N2 for 2 h to form amorphous Si-C-N-O followed by high energy milling for 1 h. Milled amorphous Si-C-N-O was sintered in hot pressing at 1600 and 1700 °C for 1 h in vacuum under the applied pressure of 50 MPa. Although no sintering additives were used, dense SiC-based composites were obtained with this method. Sintered density was 3.04 g/cm3, while only 2.57 g/cm3 for amorphous Si-C-N-O without milling. It is suggested …

Characterization And Utilization Of Calcium Oxide (Cao) Thermally Decomposed From Fish Bones As A Catalyst In The Production Of Biodiesel From Waste Cooking Oil, Aldes Lesbani, Sabat Okta Ceria Sitompul, Risfidian Mohadi, Nurlisa Hidayati

Makara Journal of Technology

Thermal decomposition of fish bones to obtain calcium oxide (CaO) was conducted at various temperatures of 400, 500, 800, 900, 1000, and 1100 °C. The calcium oxide was then characterized using X-ray diffractometer, FTIR spectrophotometer, and SEM analysis. The calcium oxide obtained from the decomposition at 1000 °C was then used as a catalyst in the production of biodiesel from waste cooking oil. Diffraction pattern of the calcium oxide produced from decomposition at 1000 °C showed a pattern similar to that of the calcium oxide produced by the Joint Committee on Powder Diffraction Standard (JCDPS). The diffractions of 2q values …

Thermoeconomic Optimization Of Cascade Refrigeration System Using Mixed Carbon Dioxide And Hydrocarbons At Low Temperature Circuit, Nasruddin Nasruddin, Arnas Arnas, Ahmad Faqih, Niccolo Giannetti

Makara Journal of Technology

Many applications and industrial processes require very low cooling temperature, such as cold storage in the biomedical field, requiring temperature below -80 °C. However, single-cycle refrigeration systems can only achieve the effective cooling temperature of -40 °C and, also, the performance of the cycle will decrease drastically for cooling temperatures lower than -35°C. Currently, most of cascade refrigeration systems use refrigerants that have ozone depletion potential (ODP) and global warming potential (GWP), therefore, in this study, a cascade system is simulated using a mixture of environmentally friendly refrigerants, namely, carbon dioxide and a hydrocarbon (propane, ethane or ethylene) as the …

Developing Road Infrastructure Route Planning: Increasing Feasibility Of Toll Road Project, Mohammed Ali Berawi, Teuku Yuri Zagloel, Perdana Miraj, Abdur Rohim Boy Berawi, Wellsi Titaheluw, Saipol Bari Bin Abd Karim

Makara Journal of Technology

Indonesian government attempts to improve connectivity and to increase regional activities in Sumatera Island through the development of Trans Sumatera Toll Road (TSTR). However, despite its benefits to local economic development in Sumatera, the project shows low feasibility due to a low amount of investment. It can be attributed from the lack of planning in the initial phase to produce a comprehensive route that considers the various potentials of the regions. Thus, this research aims to investigate alternative route planning of Trans Sumatera Toll Road particularly in this paper for Central Sumatera by studying Gross Regional Domestic Product (GRDP), population …

Thermal And -Γ –Ray Irradiation Effects On The Ionic Conductivity Of (Licl)X(Montmorillonite)1-X, Safei Purnama, Aziz Khan Jahja, Takeshi Sakuma

Makara Journal of Technology

Compositesof montmorillonite (MMT) - lithium salts have been prepared using a simple process of powders mixing followed by heating. The powders resulting from this method are expected to beionic conductors with a high ionic conductivity characteristics. This characteristics is also further improved by employing gamma-ray irradiation technique at specified irradiation doses. The best results were obtained for the (LiCl)0.5(MMT)0.5 composite with a room temperature ionic conductivity of 2.192 mS/cm, which then increases to ~5 mS/cm after gamma irradiation at a dose of 400 kGy. This value is equivalent to the value of the ionic conductivity of current commercial rechargeable lithium …

Economic Feasibility Of Campus-Wide Photovoltaic Systems In New England, Jongsung Lee, Byungik Chang, Can B. Aktas, Ravi Gorthala

Civil Engineering Faculty Publications

Compared to the national average residential retail electricity price, Connecticut (CT) had the 4th 26 highest electricity price in the country with 19.23 cents/kWh in September 2015, nearly 50% 27 higher than the national average for price of electricity. This study aims to assess the economic 28 feasibility of the solar PV systems at the campus under realistic constraints, by analyzing actual 29 data from the solar array on campus. The project focused on the economic feasibility of solar PV 30 systems on campus with physical, spatial, and practical constraints that result in a project to 31 deviate from theoretical …

Sustainable Temporary Housing: Global Trends And Outlook, Daniel V. Perrucci, Bianca A. Vazquez, Can B. Aktas

Civil Engineering Faculty Publications

The concept of sustainable housing can take many forms or definitions. The view embraced in this study for sustainable housing was a structure that is low-cost, energy efficient, and one that uses local renewable or recycled materials, while at the same time being safe and providing shelter to its occupants from the elements. Rather than focus on a few aspects of housing in isolation from spatial necessities or occupant demographics, the approach used in this study was to seek best practices for sustainable temporary housing that also accounts for local climatic conditions. The global need for temporary housing may be …