Civil and Environmental Engineering Commons^™

Bs News September/October

Building Services Engineering

No abstract provided.

Hydrologic Impacts Of Bioswale Porous Media On Parking Lot Drainage, Jungseok Ho, James Jihoon Kang

Civil Engineering Faculty Publications

Bioswales are stormwater control structures designed stormwater runoff volume and filter stormwater solids and pollutant from surface runoff. Bioswale generally consists of sloped surface ground with native wetland plants to lead stormwater percolation and infiltration, porous media to allow for stormwater retention and stormwater contaminant filtration, and stormwater drain conduit under the porous media. In this study, we monitored the bioswale evaluation factors of stormwater total volume reduction, peak flow rate reduction, and peak time attenuation. It is concluded that, based on a total of 29 monitoring of storm events, pumice is a hydrologically best performing material for the bioswale …

Performance Evaluation And Development Of Mechanistic Empirical Pavement Design Procedure Of Thin Rcc Pavements, Moinul Islam Mahdi

LSU Doctoral Dissertations

With the increasing shale gas exploration, agricultural and logging activities on the low volume roadways, the Louisiana Department of Transportation and Development (LADOTD) and the Louisiana Transportation Research Center (LTRC) are interested in thin applications of Roller Compacted Concrete (RCC) to be used as a design alternative for those low volume roadways having frequently heavy truck trafficking. The objectives of this research were: (1) to evaluate the structural performance and cracking failure mechanism of thin RCC pavements; (2) to develop a mechanistic-empirical based RCC pavement thickness design procedure for LADOTD to use in their low-volume pavement design.

In this study, …

Characterization Of Asphalt Healing And Incorporation In A Fatigue Damage Model, Umme A. Mannan

Civil Engineering ETDs

Healing is defined as the restoration of the material property during the rest period after damage. The healing property of the asphalt binder is opposite to fatigue damage, which occurs due to repeated traffic loading. On the other hand, healing occurs in the rest period between loading. Most of the existing methods for characterizing the fatigue damage and healing of asphalt are empirical in nature and do not consider the mechanism of healing. Although the asphalt concrete is a mixture of asphalt binder, fines and aggregates, most of the healing occurs in the asphalt binder. Therefore, it is important to …

A Decision Making Tool For Incorporating Sustainability Measures In Rigid Pavement Design, Neveen Samy Talaat Soliman

LSU Doctoral Dissertations

One of the most important tools in assessing rigid pavement design sustainability (or environmental impact) is a lifecycle assessment (LCA), which may be applied in any stage of a product’s lifecycle from cradle to grave, such as pavements. Although LCA was the focus of much research and codification by organizations such as the International Organization for Standards and the Society of Environmental Toxicology and Chemistry, limitations exist, such as a) LCA is time consuming; and b) the used data may become outdated, inaccurate, biased, incomplete, and/or expensive to use. These limitations are not a deficiency in LCA as a tool, …

On The Ramberg-Osgood Stress-Strain Model And Large Deformations Of Cantilever Beams, Ronald J. Giardina Jr

LSU New Orleans Theses and Dissertations

In this thesis the Ramberg-Osgood nonlinear model for describing the behavior of many different materials is investigated. A brief overview of the model as it is currently used in the literature is undertaken and several misunderstandings and possible pitfalls in its application is pointed out, especially as it pertains to more recent approaches to finding solutions involving the model. There is an investigation of the displacement of a cantilever beam under a combined loading consisting of a distributed load across the entire length of the beam and a point load at its end and new solutions to this problem are …

Performance Of Mud Mortar Walls Under Seismic Loading, Christian L. Berneking Vi, Santiago Pujol, Prateek Pratap Shah, Lucas Laughery

The Summer Undergraduate Research Fellowship (SURF) Symposium

The inherently brittle nature of unreinforced masonry structures results in poor performance during earthquakes, presenting major hazards to communities. Many of these structures found in Nepal were severely damaged or destroyed during two earthquakes in 2015. The purpose of this project is to test the effect on seismic response of several modifications to stone and mud mortar structures. These structures are common in many areas of Nepal. Two T-shaped stone and mud mortar masonry walls are constructed. The first wall has no modifications and represents current building practices. The second wall uses steel wire mesh as external reinforcement. Each wall …

Electrochemical Removal Of Lead In Water With Multi-Wall Carbon Nanotube Filters, Benjamin M. Stryker, Sol Park, Zhi Zhou

The Summer Undergraduate Research Fellowship (SURF) Symposium

Heavy metals, such as lead, are highly toxic and typical removal techniques are costly for household applications; causing serious public health risks and economic burdens. Previous studies using electrochemical filtration showed that singe-wall carbon nanotube membranes (SWCNTs) were effective at removing lead, but the use of less expensive multi-walled carbon nanotubes (MWCNTs) has not been fully explored. Therefore, there is a critical need to determine if MWCNTs are cost-effective for the removal of lead in water. The removal efficiency of lead(II) ions in an aqueous solution was evaluated in a flow-through filtration system over 50 minutes at 1.5 mL/min. Calcium …

Evaluation Of Radiation And Design Criteria For A Lunar Habitat, Hayley E. Bower, Daniel Gomez, Antonio Bobet, Julio A. Ramirez, Shirley J. Dyke, H. Jay Melosh

The Summer Undergraduate Research Fellowship (SURF) Symposium

Extraterrestrial habitation has long been the object of science fiction, and experts in the fields of science and engineering have proposed many designs for a lunar base. The research conducted has focused on either structural stability, radiation protection, or meteorite-impact vulnerabilities, but rarely have these been considered together. The Resilient ExtraTerrestrial Habitats (RETH) project aims to design a lunar habitat from a hazards perspective, considering general degradation, meteorite impacts, seismic activity, radiation exposure, thermal extremes, and geomagnetic storms in addition to the physiological, psychological, and sociological aspects of astronauts living in such a habitat. Several members of the RETH team …

Technology To Manufacture Oriented Pvc (Pvc-O) Pipes, Purdue Ect Team

ECT Fact Sheets Archive

The development of Molecor´s technology, which is based on the application of a Molecular Orientation process, has delivered a significant turning point in the pipelines sector. With this technological development, the company has begun to manufacture TOM® PVC-O pipes, the most eco-friendly pipes on the market. The Molecor technology enabled eradicating many of the existing disadvantages of thermoplastic pipes.

This technology delivers a clear objective; to provide the water industry with a solution for pipes carrying pressurized water in an environmentally friendly, yet cost efficient manner. This also extends a service life compared to pipeline materials currently in use.

The …

Full-Water Column Turbulence Parameterization Of Stratified Waters In Southern Lake Michigan, Kyla A. Prendergast, Cary D. Troy, David Cannon

The Summer Undergraduate Research Fellowship (SURF) Symposium

Full water column mean flow and turbulence structure was characterized at two stratified locations in Lake Michigan (a. Muskegon, MI; b. Michigan City, IN) in order to better understand the filtration potential of invasive quagga mussels. Invasive quagga mussels in Lake Michigan are filter feeders and can dramatically alter clarity as well as the biological/chemical characteristics of the water column. This filtering capacity is highly contingent on turbulence characteristics throughout the water column, which is poorly understood in the Great Lakes. Using velocity, temperature, and turbulence data collected from these locations, the structure of the water column turbulence was modeled …

Hazard Assessment Of Meteoroid Impact For The Design Of Lunar Habitats, Herta Paola Montoya, Shirley Dyke, Julio A. Ramirez, Antonio Bobet, H. Jay Melosh, Daniel Gomez

The Summer Undergraduate Research Fellowship (SURF) Symposium

The design of self-sustaining lunar habitats is a challenge primarily due to the Moon’s lack of atmospheric protection and hazardous environment. To assure safe habitats that will lead to further lunar and space exploration, it is necessary to assess the different hazards faced on the Moon such as meteoroid impacts, extreme temperatures, and radiation. In particular, meteoroids pose a risk to lunar structures due to their high frequency of occurrence and hypervelocity impact. Continuous meteoroid impacts can harm structural elements and vital equipment compromising the well-being of lunar inhabitants. This study is focused on the hazard conceptualization and quantification of …

Purdue Airsense: An Affordable Way To Measure And Study Air Pollution, Stephane Junior Nouafo Wanko, Shadi Tariq Azouz, Ruihang Du, Brandon Boor, Greg Michalski

The Summer Undergraduate Research Fellowship (SURF) Symposium

Air pollution is a major health hazard worldwide, accounting for one-eighth of all deaths in 2012 (World Health Organization). Globally, there is a severe lack of ground-based spatiotemporal monitoring of gaseous and particulate air pollutants, particularly in Africa, South and Central America, and the Middle East. This is in great part due to the high costs of air quality instrumentation that meet accuracy and reliability criteria set by monitoring agencies. The air quality data that is available is often not presented to the public in a user-friendly manner. Taking advantage of recent developments in low-cost sensing technologies, an integrated sensor …

Buckling Of Cylindrical Shells Under Wind Loading, Tianlong Sun, Eyas Azzuni, Sukru Guzey

The Summer Undergraduate Research Fellowship (SURF) Symposium

Cylindrical shells such as aboveground steel storage tanks are widely used to store gases, chemicals and fuels. Stiffener rings are introduced to prevent cylindrical shells from buckling due to wind loads. The current top wind stiffener design rules used in the USA for such cylindrical storage tanks are specified in API 650. However, the design methodology of top stiffener rings is overly conservative. Therefore, relaxation of the design rules for the top stiffener is investigated in this study. The API 650 mandated top stiffener size was reduced to the same size as the mandated intermediate stiffener ring in this study. …

Spectroscopic Contrast Of Diarylethene Molecules On Octanethiol Monolayer, Arramel Arramel, Tibor Kudernac, Nathalie Katsonis, Bernard Lucas Feringa, Bart Jan Van Wees

Makara Journal of Technology

We present a systematic scanning tunneling microscopy (STM) study of bias-dependent imaging of disulfur diarylethene (2S-DE) molecules on octanethiol (C8) monolayer at room temperature. In a rigid confinement of the C8 matrix, we did not observe any significant variation in the appearance of the 2S-DE. On the contrary, a reversal in the apparent height of the 2S-DE was present when the molecule was situated on a gold vacancy island. We attributed this finding to the presence of a new electronic state that became accessible for a tunneling event. In addition, the C8 surface structure underwent a reversible phase transformation from …

Residual Stress Measurements On The Tig Weld Joint Of 57fe15cr25ni Austenitic Steel For Structural Material Applications By Means X-Ray Diffraction Techniques, Parikin Parikin, Agus Hadi Ismoyo, Riza Iskandar, Arbi Dimyati

Makara Journal of Technology

Measurements of residual stress on the 57Fe25Cr15Ni steel plate with no-filler TIG-welding process were carried out. This work was conducted to determine the nature of weld ability in synthesized steel. The bulks were formed in a dimension of 30x20x7 mm3 to ease data retrieval. Results show that the largest residual stress occurred in the weld metal area, amounting to 82.40 MPa with lattice stretching of 0.18%. Conversely, the values decreased to 65.92 MPa and a stretch of 0.14% in the HAZ area. This residual stress is a tensile stress that can reduce the mechanical strength of the material since it …

An Efficient Palladium-Thiourea Catalysed Heck Cross-Coupling Reaction For Molecular Electronic Interest, Wan M. Khairul, Mohd Shahrul Shahmi Md Shariff, Rafizah Rahamathullah, Adibah Izzati Daud, Mustaffa Shamsuddin, Siti Kamilah Che Soh

Makara Journal of Technology

The synthesis and utilization of C-C bonds formation are concerned about the key steps for the building of several conducting molecular electronics involving many asymmetric catalysts approached, which is an essential task that most researchers would ignore in preparing these materials to enhance the production yield of cross-coupling materials. Despite the enormous progress, there still remains a great demand for economic and practicable cross-coupling processes involving ultra-low catalyst loadings with high turnover numbers due to the employment of conventional metal catalyst. Thus, there has been an excessive interest to cultivate non-phosphine palladium catalysts for excellent achievement of activity, stability, and …

A Study On Dielectric Properties Of The Cellulose Derivative-Nh4br-Glycerol- Based The Solid Polymer Electrolyte System, Nur Muhitul Jalilah Rasali, Saifful Kamaluddin Muzakir, Ahmad Salihin Samsudin

Makara Journal of Technology

The characterization of biopolymer-based solid polymer electrolytes (SPEs) has been carried out in this present work. Cellulose derivative was chosen due to its superior physical attributes. In this work, NH4Br-doped glycerol plasticized carboxyl methylcellulose-based SPEs were successfully prepared via the solution casting method. The conductivity and dielectric properties of the prepared films were investigated using the impedance analysis which presented ~1.91×10-3 Scm-1 (with addition of 6 wt% of glycerol). In addition, the studied SPE system shows a non-Debye behaviour without a single relaxation time. The findings of the research indicate that the complexes of NH4Br and glycerol in the cellulose …

Urban Drainage Management And Flood Control Improvement Using The Duflow Case Study: Aur Sub Catchment, Palembang, South Sumatra, Indonesia, Charlotte De Fraiture, Robiyanto Hendro Susanto, F.X. Suryadi, Harrini Mutiara Hapsari Wahyu

Makara Journal of Technology

Urban flooding often times staggers the livelihood in an urban area, which most likely happens in the lowland urban area. Therefore, the existing urban drainage system should be improved in order to tackle the upcoming urban flooding events, which are more than likely to be more devastating than those in the previous years. The research location is in Palembang, Sumatra, Indonesia, where 30% of its urban part is a lowland area. The selected Aur Sub Catchment is located in Silaberanti. The main objective of this research is to improve the current drainage system in order to achieve the optimal design …

Ethanol Purification Using Activated Natural Zeolite, Chandra Wahyu Purnomo, Nelliza Putri, Indra Perdana, Hirofumi Hinode

Makara Journal of Technology

Bio ethanol is one of the potential fuels in the future. However, ethanol in water mixture has an azeotropic concentration of 95.6 wt. %, which makes it difficult to purify further. The common method of purification is by using an azeotropic distillation column, which requires an intensive energy and an addition of specific solvent. In this study, ethanol purification is done using an adsorption column packed with zeolite Raschig rings. The natural zeolite ring was modified beforehand using the NaOH solution to enhance the material’s water adsorption performance. The ethanol purity can reach more than 99% with the modified zeolite …

Physical And Mechanical Properties Of Palm Kernel Oil-Based Polyester Polyurethane/Multi-Walled Carbon Nanotube Composites, Khairul Anuar Mat Amin, Muhammad Alif Zailani, Nurul Nabilah Zulkifli, Khairiah Haji Badri

Makara Journal of Technology

In this study, polyurethane (PU) films from palm kernel oil-based polyester (PKO-p) incorporated multi-walled carbon nanotubes (MWNTs) are prepared via a evaporative casting method. Nanoparticle fluid dispersions containing 0.02%, 0.03%, and 0.05% wt. of MWNTs are added into PKO-p based resin and mixed by digital probe sonicator for 30 min followed by mixing with isocyanate to produce PU-MWNTs composite films. The mechanical properties, swelling, water vapour transmission rate (WVTR) and conductivity of the PU-MWNTs composite films are examined. Results show that the toughness (T) or flexibility, the tensile strength (TS), and Young’s modulus (YM) values of PU-MWNTs composite films increase …

Personality Trait Based Intervention For Workplace Accident Prevention, Yassierli Yassierli, Nurhayati Nurhayati, Marisa Anatasia, Shamsul Bahri

Makara Journal of Technology

Previous research has suggested that some traits may be useful as the predictors of risk behaviours behaviors. Therefore, personality traits seem to play a role in accident involvement. The purpose of this study is was to explore the relationship between the personality traits based on the Big Five Inventory (BFI) and worker accident experiences in order to elaborate personality traits based intervention for workplace accident prevention. A cross cross-sectional study was conducted among 173 workers in a cement company using a set of questionnaires consisting of respondents’ characteristics, BFI, and self-reported accident experience. The correlations were computed using Goodman Kruskal’s …

Viscoelastic Analysis And Fatigue Characterization Of Bituminous Materials In Two Length Scales Under The Influence Of Aging, Santosh Reddy Kommidi

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Fatigue cracking in asphalt concrete (AC) is of immense importance to pavement design and analysis because it is one of the most important forms of distress that can lead to structural failure in pavement. Once started, these types of cracks can be combined with other environmental factors leading to detrimental effects such as faster rates of pavement deterioration and shortened pavement life and functionality.

Currently AASHTO TP101, also known as linear amplitude sweep (LAS) specification, is being widely used to evaluate the ability of an asphalt binder to resist fatigue. The LAS method, although mechanistic in its approach, has certain …

Geophysical Assessment Of Kinion Lake Dam, Tim Allen Moody

Graduate Theses and Dissertations

Geophysical methods including Capacitively-Coupled Resistivity (CCR), Electrical Resistivity Tomography/Imaging (ERT/ERI), Multichannel Analysis of Surface Waves (MASW) with Love and Rayleigh waves and a Full-Waveform Inversion (FWI) were performed on Kinion Lake Dam, an earth-filled embankment dam that has historically experienced significant seepage and internal erosion issues. Surveys were completed along the crest and downstream toe of the dam. Results from the surveys indicate that each method is capable of resolving the bedrock depth within 1-2 m of locations shown on previous drilling logs, though some discrepancies between the methods exist. A weathered bedrock layer is believed to have led to …

Mitigation And Evaluation Of Alkali-Silica Reaction (Asr) And Freezing And Thawing In Concrete Transportation Structures, Richard Albert Deschenes Jr.

Graduate Theses and Dissertations

An evaluation of alkali-silica reaction (ASR) and freezing and thawing (F/T) in concrete transportation structures is presented along with mitigation methods for slowing the rate of deterioration in concrete. A combination of field and laboratory testing confirms ASR deterioration is exacerbated by exposure to F/T. Laboratory testing indicates an aggregate previously deemed inert to ASR, caused ASR deterioration in several concrete pavement and transportation structures. Existing standard test methods deem this aggregate safe for use in concrete. A modified test method shows the concrete can deteriorate rapidly when subjected to cycles of conditions promoting ASR and F/T. Several structures containing …

Conditional Bias-Penalized Kalman Filter For Improved Estimation And Prediction Of Extremes, Miah Mohammad Saifuddin

Civil Engineering Theses - Archive

Kalman filter (KF) and its variants are widely used for real-time updating of model states and prediction in environmental sciences and engineering. Whereas in many applications the most important performance criteria may be the fraction of the times when the filter performs satisfactorily under different conditions, in many other applications the performance for estimation and prediction of extremes, such as floods, droughts, algal blooms, etc., may be of primary importance. Because KF is essentially a least squares solution, it is subject to conditional biases (CB) which arise from the error-in-variable, attenuation, effects when the model dynamics are highly uncertain, the …

Hydrocarbon Pool Fire Performance Of Reinforced Elastomeric Bearing Pads, Shashank Malal

Civil Engineering Theses - Archive

Bearing pads are used as support for bridge girders to transfer the reaction forces to the substructure. They are designed to accommodate high axial loads from girder, shear deformations due to lateral thermal expansion of girder, and rotational deformation. Apart from these deformations bearing pads may also be subjected to thermal stresses due to daily temperature variations and extreme events like fire hazard. Current design methods do not account for these thermally induced stresses in elastomeric bearing pads. The objective of this research is to study the hydrocarbon pool fire performance of elastomeric bearing pad. This research has three parts. …

Investigation And Proposed Remedy Of Vibration Problem In Industrial Crane System Due To Human Operation, Dustin C. Lorance

Civil Engineering Theses - Archive

A recent investigation of a crane system began when a facilities manager reported a runway beam under-going torsional vibration during operations. The investigation revealed the runway beam’s twisting was caused by resonance vibration due to “inching” of the crane hoist. A Fourier spectrum analysis revealed that one of the harmonic frequencies of this rhythmical motion coincided very close to the natural frequency of the crane system. The runway beam, although met strength requirements, failed to meet serviceability criteria due to the resonance vibration. Resonance vibration issues due to human activity in crane operation (inching, sway, etc.) is often encountered by …

Performance Of Lime- And Cement- Based Treatments Of Sulfate-Rich Soil Via Rc Testing, Azadeh Asghariastaneh

Civil Engineering Theses - Archive

Chemical treatment of expansive sulfate-rich soils, particularly lime- and cement-based methods, had been rather popular due to their relatively low cost and ready availability. However, over the last few decades, extensively documented pavement failures, mainly caused by excessive heaving and/or shrinkage of lime- and cement-treated subgrades with moderate-to-high sulfate content, have led to thorough investigations to assess the actual feasibility and effectiveness of calcium based stabilizers in sulfate-rich soils. Studies have concluded, with solid experimental evidence, that the calcium present in the chemical stabilizers react with the sulfate and alumina of the treated soil to form Ettringite, an expansive mineral …

Making Public Health Performance Measures For Transportation Accessible To Practitioners, Ziaur Rahman

Civil Engineering Dissertations - Archive

Pollutants emitted into the atmosphere from static and mobile sources pose a threat to human health. The detrimental impact associated with air pollution varies by the type of pollutant, the magnitude, frequency and duration of exposure, and the associated toxicity. While stationary sources play an important role in air pollution, motor vehicle exhaust emissions represent the single largest source of regional air pollution in urban areas. Moreover, outdoor physical activity requires an increased oxygen level with an increase in exercise intensity. Research has shown that both the ventilation and deposition fractions increase significantly during outdoor activities, which may lead to …