Civil and Environmental Engineering Commons^™

Detection And Elimination Of Rock Face Vegetation From Terrestrial Lidar Data Using The Virtual Articulating Conical Probe Algorithm, Kenneth John Boyko

Doctoral Dissertations

"A common use of terrestrial lidar is to conduct studies involving change detection of natural or engineered surfaces. Change detection involves many technical steps beyond the initial data acquisition: data structuring, registration, and elimination of data artifacts such as parallax errors, near-field obstructions, and vegetation. Of these, vegetation detection and elimination with terrestrial lidar scanning (TLS) presents a completely different set of issues when compared to vegetation elimination from aerial lidar scanning (ALS). With ALS, the ground footprint of the lidar laser beam is very large, and the data acquisition hardware supports multi-return waveforms. Also, the underlying surface topography is …

Development Of Lidar Assisted Terrestrial Radar Interferometry For Rock Deformation Monitoring, Ricardo Javier Romero Ramirez

Doctoral Dissertations

"Rock and soil slope movements cost millions of dollars annually. During the past few decades, engineers have relied on traditional methods to detect slope movements. These tools are valuable for small spatial areas but, may not be adequate or cost effective for large spatial areas. Remote sensing methods such as terrestrial laser scanning (TLS) and terrestrial radar interferometry (TRI) provide excellent spatial coverage, and with adequate post-data-processing software, sub-millimetric scale deformation sensitivity can be achieved.

This work will present a comparative experimental study between TLS and TRI. The comparative experimental study will allow us to achieve the two main objectives …

Minimizing Trihalomethane Formation Through Source Water Monitoring And Optimizing Treatment Practices, Nashid Mirza

Graduate Theses, Dissertations, and Problem Reports (ETD)

Trihalomethanes, a family of halogenated disinfection byproducts, are prevalent in finished drinking water. According to USEPA’s Disinfectants and Disinfection Byproducts Rules (DBPRs), the regulatory standard of the total trihalomethanes (TTHMs) is 80 μg/L, and water treatment plant operators are required to closely monitor TTHMs in the finished water on a quarterly basis. Although total organic carbon (TOC) has been identified as a precursor for the TTHMs, knowledge gaps still exist in how specific water and treatment related factors (e.g., intake water quality, seasonal variation, contact time, and treatment train) affect TTHMs formation. Focusing on water treatment plants in southwestern Pennsylvania, …

Review Of Water Allocation Models For West Virginia, Madison Lee Alexis Thompson

Graduate Theses, Dissertations, and Problem Reports (ETD)

Modeling river basins started gaining in popularity and usage in the western part of the United States in large part due to its extreme droughts. Planning is necessary to sustain the population, industries, and recreational water use year-round. Water allocation modeling is a tool used to aid in the issues that come from managing water resources. This work considers the continuous models that synthesized the hydrologic processes that occur and provides a simulation of past, current, or future conditions.

West Virginia, located on the eastern side of the United States, does not have an extreme drought problem as seen in …

Direct Determination Of The Dynamic Elastic Modulus And Poisson's Ratio Of Timoshenko Prisms And Rods, Guadalupe Leon

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this study, the exact solution of the Timoshenko beam vibration frequency equation under free-free boundary conditions was determined with an accurate shear shape factor. The exact solution was compared with a 3-D finite element calculation using ABAQUS program, and the difference between the exact solution and the 3-D FEM was within 0.15% for both the transverse and torsional modes. Furthermore, relationships between the resonance frequencies and Poisson’s ratio were proposed that can directly determine the elastic constants, unlike the equations provided by ASTM C215. The frequency ratio between the 1^st bending mode and the 1^st torsional mode, …

The Mechanics Of Precision Presplitting, Anthony Joseph Konya

Doctoral Dissertations

"Precision Presplitting is a widely used method of presplit blasting for the mining and construction industries. In recent years considerable effort has gone into the development of empirical equations based on field data to be able to better design the Precision Presplit for various rock types and structural environments. However, the most widely discussed theory about the mechanics of the presplit formation, that of shockwave collisions, does not appear to be applicable for this method of presplitting.

This research has disproven this theory based on insufficient magnitude of the shockwave from modeling with basic wave mechanics. Other authors have suggested …

Accuracy Of 3d Point-Cloud And Photo-Based Models Of City Street Intersections, Mariah D. Peart

College of Graduate Studies: Theses & Dissertations

From Georgia Southern University’s Built Environment and Modeling lab, this study compares point positions and distance measurements completed with state-of-the-art instruments and equipment. A modern, 12-second, laser scanner, a modern unmanned aerial vehicle and a highly accurate, 1-second robotic total station were employed for this study. The latter serving as the benchmark instrument. The main objective of this quantitative comparison is to explore the accuracy and usability of a relatively large point-cloud model, as a virtual surveying tool for redesign/reconstruction purposes. This project involves the generation of large, 3D, point-cloud models of two busy and complex city street intersections. One …

Finite Element Modeling Of Mechanically Stabilized Earth Walls Built With Welded Wire Wall Panels, Dejuan G. Solan

College of Graduate Studies: Theses & Dissertations

In this thesis, a finite element modeling of Mechanically Stabilized Earth (MSE) walls using welded wire wall panels was performed. The implementation of finite element modeling and analysis proved to be quite efficient in simulating the three-dimensional behavior of wall panels that are a part of MSE walls. The comprehensive finite element model included defined concrete and steel material properties in order to present both the realistic behaviors of each component in the model as well as better facilitating and increasing the accuracy of the simulation of numerous finite element analysis (FEA) cases. FEA was employed to simulate welded wire …

Feasibility And Assessment Of Using Recycled Rubber For Infrastructure Applications, Ahmed A. Gheni

Doctoral Dissertations

“The United States needs to mine billions of tons of raw natural aggregate each year. At the same time, millions of scrap tires are stockpiled every year. Therefore, replacing natural aggregate with recycled crumb rubber aggregate will be beneficial to the construction industry and environment. This research aimed to investigate the feasibility of using recycled rubber in new construction applications. Based on size, recycled rubber was selected to match its natural counterpart. Different ratios of recycled crumb rubber were used as a fine aggregate replacement in concrete masonry units (CMUs) where the rubberized units showed a lower unit weight, higher …

Load Rating Mobility As A Framework For Bridge Owners, Bryan Keith Stephens

Open Access Theses & Dissertations

In this time of financial economy, bridge owners are faced with the important decision of where to focus financial assets while attempting to determine which structures are in most need. Bridge Engineers and researchers alike agree that a large portion of the United States bridge population are reaching the end of their design life. Researchers are currently investigating various means and methods of lengthening the amount of usefulness of these key pieces of infrastructure. This paper introduces the novel idea of bridge Load Rating Mobility and how it can be leveraged by stake holders to assist in making those financial …

Towards Multiple Model Approach To Bridge Deterioration, Jin A. Collins

Open Access Theses & Dissertations

The Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) marked the start of a new era in transportation in the United States. ISTEA required transportation agencies to take a proactive approach to planning and management of their assets. This included requirements for managing pavement, bridges, safety, congestion, public transportation, and intermodal systems. For horizontal transportation assets (i.e., bridges and pavement), deterioration modeling is an essential tool (Yanev and Chen 1993). Since ISTEA, Bridge Management Systems (BMS) have been utilized to inform decision-making regarding bridge projects such as maintenance, rehabilitation, and replacement (MR&R) under financial limitations (Agrawal, Kawaguchi, and Chen 2010). …

Assessment Of Point Of Use (Pou) Systems For Reducing Health Risks Associated With Drinking Water Along The U.S.-Mexico Colonias In The Paso Del Norte Region, Varinia Viridiana Felix Parra

Open Access Theses & Dissertations

In the Paso del Norte Region along the U.S. Mexico Border, there are more than 5,000 families living in impoverished communities known as colonias that lack access to basic infrastructure services such as a public water system. These depend on hauling trucks that deliver water into their storage tanks. Water storage practices by colonia residents on both sides of the border pose an enormous risk for waterborne disease outbreaks and heavy metal contamination because the water quality can decrease rapidly due to volatilization of the residual chlorine, intrusion of rainfall and air-laden dust. Since connection to centralized water treatment and …

Structural Design Of Complex Components, Armando Antonio Ochoa

Open Access Theses & Dissertations

The University of Texas at El Paso (UTEP) and the Center for Space Exploration and Technology Research (cSETR) is determined to develop a launch vehicle that is made completely of additive manufacturing materials, has the capability to transport a 100 lb payload to low earth orbit (LEO) as well as completing the design of a strucutral steel mobile launch stand that has the capability of withstanding the launch vehicle's static and dynamic loadings. The project will consist of carbon composite components to reduce weight while maintaining efficiency, strucutral steel components to resist extreme loadings and maintain strucutral shape, and lastly …

Quantifying Early-Age Concrete Mechanical Properties And Curing Conditions Utilizing An Automated System, Benjamin Arras

Open Access Theses & Dissertations

The validation of concrete quality based on the 28-day strength is a lengthy process. Predicting concrete mechanical properties through early-age methods can streamline the construction process. Early-age concrete behavior consists of assessing the concrete curing as-related to setting stages, the hydration process, strength and stiffness development, while considering various environmental system parameters. This paper reports on a nondestructive method for observing the early-age strength and modulus development of concrete mixes over seven days in a controlled, laboratory setting. An apparatus was designed and built for continuous acquisition of seismic modulus data (using free-free resonant column) and heat of hydration/maturity information …

Decision Support Tools For Parking Management On University Campuses, Okan Gurbuz

Open Access Theses & Dissertations

University campuses generate and attract trips with unique characteristics. Most universities are constantly challenged by the parking congestion issues. To manage campus parking infrastructure, most universities have established parking departments. This department is referred as the University Parking Office (UPO) in this Dissertation. There is no methodology or tool to assist the UPOs in their decision-making process. This Dissertation focuses on student parking and has developed models and methodologies as decision support tools to assist UPOs in managing student parking on campuses.

This Dissertation answers six Research Questions related to parking management on university campuses: (1) How many students are …

System Dynamic Model Of 1-Dimensional Unsaturated Water And Solute Transport For Predicting Salinity Stress In Crops, Thomas Poulose

Open Access Theses & Dissertations

There is a complex non-linear system dynamic between the water and salt transport in the unsaturated vadose zone where the salt transport and accumulation affect the water fluxes and vice versa. In addition, factors such as precipitation, transpiration, water infiltration and solute transport in the unsaturated zone of subsurface soil further complicate the processes involved. We have developed a system dynamics model for simulating the one-dimensional unsaturated water and solute transport along with root water uptake in the vadose zone. The model uses finite difference method for solving Richard's equation with a sink term for water transport and root water …

Calculation Methods Of Radon-222 Radiological Activity For Norm Plant With Ventilation, Pedro M. Dieguez-Elizondo, Paul G. O'Donohoe, Tomas Gil-Lopez, Juan Castejon-Navas, Miguel A. Gálvez-Huerta

Articles

A procedure is proposed to determine the radiological activity of air present in the working area of a NORM (Naturally-Occurring Radioactive Materials) plant. This NORM plant is located in the United Arab Emirates and is dedicated to the recycling of material and equipment used in oil extraction facilities. Substantial quantities of NORM waste will be present inside the enclosed plant facilities and will exhale significant amounts of Radon-222 into the working environment. The continued inhalation of this gas and its progeny has been shown to cause lung cancer. In order to reduce the concentration level of the aforementioned gas to …

Smart Building And Construction Materials, Donglu Shi, Julian Wang, Wen Deng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Smart Building And Construction Materials, Donglu Shi, Julian Wang, Wen Deng

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Advances and innovations in materials science and engineering have always played a substantial role in civil engineering, building structural design, and construction. In recent years, extensive effort has been devoted to the applications of stimuli-responsive smart materials and nanostructures in buildings. These smart materials used in the built environment can be defined as those offering specific functional and adaptable properties in response to thermal, optical, structural, and environmental stimuli. Not only do these materials enhance the overall performance of new building construction but also promise safer structures, longer durability of building elements, efficient building energy savings, greater environmental sustainability, and …

Laboratory Study On The Strength Behaviour Of Two Laterally Loaded Adobe Walls, Brad D. Weldon, Paola Bandini, Michael J. Mcginnis, Eduardo Dávila, Diego I. Garcia Vera

Civil Engineering Faculty Publications and Presentations

Adobe is a traditional construction technique found in historic and new construction throughout the world, often in earthquake-prone regions. Adobe structures are particularly susceptible to seismic forces due to their substantial mass and low tensile capacity. In addition, adobe is affected negatively by moisture that may penetrate from the ground or through the plaster. This paper describes the preliminary findings of an experimental program to investigate the effect of higher water content in the lower part of the wall on the wall strength behaviour under lateral loading. Lateral load tests were conducted on two quarter-scale adobe walls, one in air-dry …

Laboratory Evaluation Of Recycled Crushed Glass Cullet For Use As An Aggregate In Beach Nourishment And Marsh Creation Projects In Southeastern Louisiana, John C. Wildman

LSU New Orleans Theses and Dissertations

To combat the rapid degradation of the Louisiana coast, the Louisiana Coastal Protection and Restoration Authority has planned strategic land building initiatives throughout the Louisiana Gulf coast, including beach nourishment and marsh creation projects. It is commonly agreed that the state lacks sufficient renewable sediment resources to maintain the planned CPRA land building program. However, Louisiana, the state that commonly ranks last in state recycling percentage, recycles an estimated 0.6% of the waste glass consumed in the state. Glass is predominantly silica sand. This thesis evaluates laboratory‑determined characteristics of recycled crushed glass cullet to assess its suitability as a renewable …

Calculation Of Access Charge For High Speed Rail Xpresswest Of Nevada, Sameeksha Sapkota

UNLV Theses, Dissertations, Professional Papers, and Capstones

XpressWest is a High Speed Rail (HSR) system that plans to connect Las Vegas with California at Palmdale. It will utilize the railway network of the California High Speed Rail (CAHSR) to connect Las Vegas with California destinations that include Los Angeles and San Francisco. For sharing the railway network of CAHSR, XpressWest will pay certain charge known as an access charge. The access charge is the fee paid by the train operator to the infrastructure owner for the addition of trains in a track. There are several access charge systems in the world. However, there is no study that …

Effect Of Curing Conditions On Mechanical Properties And Durability Of Concrete, Edgar Lazaro Salas-Borrero

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis presents the results for three different concrete mix designs with compression strengths of 4500 psi. The experiment was conducted in the Las Vegas area during the summer, from August 16th to October 12th, 2018, where temperatures and relative humidity was recorded daily, three times a day. In total, 135 concrete specimens (4” x 8”) were taken on site and were subjected to five different curing conditions.

For each concrete mix design, three concrete samples (4” x 8”) were taken and submitted for each curing condition, resulting in 45 cylinders for each concrete mix design. The same number of …

Surface Resistivity For Concrete Quality Assurance, Stanley Tat

UNLV Theses, Dissertations, Professional Papers, and Capstones

The goal of this study was to determine the effectiveness of SRT for concrete quality assurance and to evaluate the relationship between SRT and the three chloride ion ingress methods currently used by various State DOTs. Additionally, the influence of binder type and content, concrete age, and water-to cementitious materials ratio on the experimental results were also examined.

In this study, Type V Portland and three SCMs; namely fly ash, slag, and silica fume were used. Fine and coarse, aggregates were supplied by a local quarry. To evaluate the transport properties of the studied concretes, RMT, RCPT, and ACT were …

Performance-Based Economical Seismic Design Of Multistory Reinforced Concrete Frame Buildings And Reliability Assessment, Chunyu Zhang

UNLV Theses, Dissertations, Professional Papers, and Capstones

As the next generation of seismic design methodology, performance-based seismic design (PBSD) method requires a structure satisfy multiple preselected performance levels under different hazard levels. Optimal PBSD methods provide different strategies to design the numerous variables, including strength, stiffness and ductility of each structural component. The overall goal of this study is to develop a new optimal PBSD method for multi-story RC moment frames. This method is capable of overcoming the deficiencies of existing optimal PBSD methods and can be implemented by the U.S. design practice. The proposed method minimizes construction cost and takes the limit of member plastic rotation …

Comparing Beijing's And Tokyo's Population Growths, Ernest M. Oleksy

The Downtown Review: An Interdisciplinary Journal Written and Peer-Reviewed by Mandel Honors College Students at Cleveland State University

The growth of the human population has led to the formation of largely populated agglomerations known as megacities. Although megacities can be found on multiple continents, Asia’s collection displays how megacities can develop in their own directions. Japan’s megacity of Tokyo, like other Japanese megacities, has adopted a western approach. China’s Beijing, on the other hand, continues to embrace its eastern roots. These megacities may differ in their ideologies, but they share in experiencing similar phenomena. One of these phenomena is population growth.

An Engineered Fit-For-Purpose Polymer Nanocomposite Seal Repair Material For Wellbores, Moneeb Genedy

Civil Engineering ETDs

Seal integrity of wellbores has become of significant interest due to repeated leakage and spill incidents occurring worldwide that jeopardize both human health and the environment in addition to causing significant economic burden. This is attributed to the fact that wellbores intersecting geographical formations contain potential leakage pathways. The cement-steel and cement-rock formation interfaces are recognized as two critical leakage pathways.

A seal repair material that has good bond strength with both steel and rock formations in addition to the ability to completely fill thin microcracks is needed to restore the seal integrity of wellbores. In this research, engineered polymer …

Bridges - Barren County, Kentucky (Sc 3308), Manuscripts & Folklife Archives

Manuscript Collection Finding Aids

Finding aid and scan (Click on "Additional Files" below) for Manuscripts Small Collection 3308. Specifications, including sketches, for the construction of a bridge across Skaggs Creek in Barren County, Kentucky. The detailed specifications as to design, dimensions, materials, and method of construction were prepared by a commission appointed by the Barren County Court. Unable to secure a bid to erect the bridge for the appropriated sum of $1,000, the commission recommended an additional appropriation in order to accept a bid of $1,200.

Treated Versus Untreated Aggregate Bases For Flexible Pavements: A Nationwide Comparitive Study, Hemant Gc, Mena I. Souliman

Civil Engineering Theses

Aggregates are a major part of highway construction and its quality as well as strength affects the overall performance of the pavement structure. The base material near the construction site does not always meet the strength requirement needed for the pavement construction and the hauling of quality aggregate increases the construction costs. For better use of local available materials, stabilizing agents such as lime and asphalt cement have been utilized to increase the strength of crushed aggregate bases. Performance of pavement structures is heavily influenced by the thickness of the structure as well as material properties of each layer. The …

Meta-Analysis Of Non-Reactive Phosphorus In Water, Wastewater, And Sludge, And Strategies To Convert It For Enhanced Phosphorus Removal And Recovery, Kaushik Venkiteshwaran, Patrick J. Mcnamara, Brooke K. Mayer

Civil and Environmental Engineering Faculty Research and Publications

Current and future trends indicate that mining of natural phosphorus (P) reserves is occurring faster than natural geologic replenishment. This mobilization has not only led to P supply concerns, but has also polluted many of the world's freshwater bodies and oceans. Recovery and reuse of this nuisance P offers a long-term solution simultaneously addressing mineral P accessibility and P-based pollution. Available physical, chemical, and biological P removal/recovery processes can achieve low total P (TP) concentrations (≤100 μg/L) and some processes can also recover P for direct reuse as fertilizers (e.g., struvite). However, as shown by our meta-analysis of over 20,000 …