Civil and Environmental Engineering Commons^™

Evaluating The Mobility And Safety Benefits Of Adaptive Signal Control Technology (Asct), John Herman Kodi

UNF Graduate Theses and Dissertations

The Adaptive Signal Control Technology (ASCT) is a traffic management strategy that optimizes signal timing based on real-time traffic demand. This thesis proposes a comprehensive methodology of quantifying the mobility and safety benefits of the ASCT deployed in the state of Florida. A Bayesian switch-point regression model was proposed to evaluate the mobility benefits of ASCT. The analysis was based on a 3.3-mile corridor along Mayport Road from Atlantic Boulevard to Wonderwood Drive in Jacksonville, Florida. The proposed analysis was used to estimate the possible dates that separate the two operating characteristics, i.e., with and without ASCT. Also, the posterior …

Decoding And Optimizing Magnesium Phosphate Binders For Additive Construction Applications, Hashem Khaled Almashaqbeh

Electronic Theses and Dissertations

This work aims to give more insight about the physical, mechanical, thermal, and chemical performance of the MPC paste composites. Our primary outcome from this research is to improve the MPC composites with different additives, including boric acid, GnP, and acetic acid for potential utilization in 3DcP applications. Furthermore, Martian and Lunar regolith simulants can be mixed with the MPC composites to create mortars as a possible extraterrestrial 3DP in-situ construction material mainly to support the NASA habitation exploration mission.

Damage Detection Using Destructive Testing Of A Reinforced Concrete Slab, Michael Edward Daves

Electronic Theses and Dissertations

Visual inspection is one of the primary tools for evaluating the health of bridges as more reach or exceed their intended lifespan. Bridge deterioration must be monitored to ensure continued safety, so owners need maintenance reports to decide on corrective actions. Strategic repair can offer asset managers the benefit of saving money and time; thus, knowing where to locate and what type of repairs can be challenging when relying on visual techniques alone. A tool designed to aid bridge inspectors is the SHE^tm program, which quantitatively measures damage location and severity for any set of time data.

Investigating The Use Of Passive Acoustics As A Surrogate Method Of Monitoring Coarse Bedload Transport In Rivers And Streams Via Laboratory Experiments And Field Studies, Bradley Goodwiller

Electronic Theses and Dissertations

The movement of coarse gravel in rivers in streams is important for many applications including wildlife habitation, river morphology, infrastructure maintenance and marine navigation. Physical sampling remains the most accurate method of determining coarse bedload transport but it can be expensive, dangerous and flow intrusive. Surrogate methods of monitoring bedload transport is an active area of research worldwide. One such method is the use of passive acoustics to record the sound generated when gravel particles in motion impact each other or the particles on the bed. This dissertation presents research and development that has been conducted on three key areas …

Warrants For Right-Turn Flashing Yellow Arrow Signal Phases, Mohammed Alfawzan

Electronic Theses and Dissertations

The right-turn flashing yellow arrow (FYA) signal phasing is a new signal practice in the United States. The Manual on Uniform Traffic Control Devices MUTCD (2009) allocates a signal phasing section for the right-turn FYA, which requires a four-section head FYA signal. It supports multiple phases' indications that guide the motorist through permissive, protected, and/or permissive/protected phases. For this dissertation, I investigated three permissive right-turn FYA signal phases in various traffic conditions and signal timing circumstances. The first permissive right-turn FYA signal phase is the tight-turn on impeding through (RTOIT) taking place during the cross-street through traffic movement. The second …

Redefining Construction “As-Built” Plans To Meet Current Kentucky Transportation Cabinet Needs, Victoria Lynn Lasley

Theses and Dissertations--Civil Engineering

As-built drawings are the traditional method used by the construction industry to record changes made during construction. As-builts provide valuable information for new design projects as well as rehabilitation and remediation projects. The completeness and accuracy of these plans are essential for transportation industries and their success. While the importance of as-builts is widely recognized, the process of creating them has proven to be difficult. It is a time consuming process and entities often lack the resources necessary to complete accurate and detailed as-builts. After an investigation of current as-built operations within State Transportation Agencies, recommendations have been made to …

Improving Safety Performance Of Highway Maintenance Crews Through Pre-Task Safety Toolbox Talks, Zamaan Al-Shabbani

Theses and Dissertations--Civil Engineering

The dangerous work environment in the construction industry and the inherent high risks associated with construction work make it the focus of safety training and regulations. Highway construction and maintenance has unique hazards but seemingly less directly applicable safety standards, regulations, and programs. Department of Transportation (DOT) employees working in highway maintenance are exposed to a variety of unique hazards specifically associated with their work and not relating to the adjacent traffic. Yet, highway construction and maintenance work has not received sufficient attention in terms of safety research and programs. The lack of safety training and education in highway construction …

An Assessment Of Historical Traffic Forecast Accuracy And Sources Of Forecast Error, Jawad Mahmud Hoque

Theses and Dissertations--Civil Engineering

Transportation infrastructure improvement projects are typically huge and have significant economic and environmental effects. Forecasts of demand of the facility in the form of traffic level help size the project as well as choose between several alternatives. Inaccuracy in these forecasts can thus have a great impact on the efficiency of the operational design and the benefits accrued from the project against the cost. Despite this understanding, evaluation of traffic forecast inaccuracy has been too few, especially for un-tolled roads in the United States. This study, part of a National Cooperative Highway Research Program (NCHRP) funded project, bridges this gap …

Hazard Recognition And Risk Perception Among Union Electricians, Elyas Jazayeri

Theses and Dissertations--Civil Engineering

Hazard recognition and risk perception are two important factors that are a focus of most safety training programs. According to previous research, unrecognized hazards could lead to underestimation of risks, which ultimately could lead to injuries and fatalities. The primary objective of this research was to assess hazard recognition and safety risk perception skills in the electrician trade among electricians in unions. Another goal of this study was to find possible correlation between level of engagement in safety training and hazard recognition and risk perception skills. The research objectives were accomplished by gathering data from sixty-seven apprentices and journeymen across …

Use Of Functionalized Bimetallic Membranes For Treatment Of Contaminated Groundwater At A Hazardous Waste Site In Kentucky, Lucy C. Pacholik

Theses and Dissertations--Civil Engineering

Providing access to clean drinking water will continue to be a challenge for civil engineers for generations to come. Since many communities around the world rely on groundwater as a source of drinking water, remediation technologies must be implemented at sites where groundwater contamination exists due to years of mismanagement of hazardous waste. Using nanosized zero-valent metals such as iron and zinc embedded within and on the surface of functionalized (PAA) membrane filters has shown to be an effective dechlorination technique for contaminated groundwater. Introducing a noble metal such as Pd or Ni increases reaction rates by acting a catalyst …

Adapting Crash Modification Factors For The Connected And Autonomous Vehicle Environment, Federico Valentin Lause Iii

Theses and Dissertations--Civil Engineering

The Crash Modification Factor (CMF) clearinghouse can be used to estimate benefits for specific highway safety countermeasures. It assists safety professionals in the allocation of investments. The clearinghouse contains over 7000 entries of which only 446 are categorized as intelligent transportation systems or advanced technology, but none directly address connected or autonomous vehicles (CAVs). Further, the effectiveness of highway safety countermeasures is assumed to remain constant over time, an assumption that is particularly problematic as new technologies are introduced. For example, for the existing fleet of human-driven vehicles, installation of rumble strip can potentially reduce “run-off-road” crashes by 40%. If …

Pathway Connectivity In An Epigenetic Fluviokarst System: Insight From A Numerical Modelling Study In Kentucky Usa, Ethan Adams

Theses and Dissertations--Civil Engineering

Fluviokarst landscapes are dominated by both fluvial and karst features. Interpreting hydrologic pathways of fluviokarst can be confounded by the unknown connectivity of the various flow regimes. A combined discrete-continuum (CDC) hybrid numeric model for simulating the surface and subsurface hydrology and hydraulics in fluviokarst basins was formulated to investigate fluviokarst pathways. This model was applied to the Cane Run Royal Springs basin in Kentucky USA. A priori constraints on parameterization were avoided via multi-stage optimization utilizing Sobol sequencing and high performance computing. Modelling results provide evidence of hydrologic pathways dominated by fracture flow, epikarst transfer and runoff. Fractures in …

Decomposing A Watershed’S Nitrate Signal Using Spatial Sampling And Continuous Sensor Data, Evan Clare

Theses and Dissertations--Civil Engineering

Watershed features, physiographic setting, geology, climate, and hydrologic processes combine to produce a time-variant nutrient concentration signal at the watershed outlet. Anthropogenic influences, such as increased agricultural pressures and urbanization, have increased overall nutrient loadings delivered to the fluvial network. The impact of such increased nutrient loadings on Kentucky’s drinking water remains a potential threat to the region.

By coupling spatial sampling of nitrate concentrations in surface water with contemporary nutrient and water quality sensor technology, a decomposition of the Upper South Elkhorn watershed’s nitrate signal and an estimation of source timing and loading in the watershed was completed. The …

Improving Bicycle Infrastructure With The Use Of Bicycle Share Travel Data, Jennifer Mintao Weast

Theses and Dissertations--Civil Engineering

Bicycling as a mode of transportation has been increasing in recent years due to its environmental and health benefits. The availability of bicycles through bicycle share programs has made bicycling a more viable option. With this increase, there is a need for complementary improvements of bicycle infrastructure. Many local and regional transportation agencies are recognizing this need and developing a master plan or safety action plan to improve the city’s bicycle and walking facilities. This study examines bicycle travel demands and travel patterns in Lexington, Kentucky as generated by SPIN bicycle share users. It is hypothesized that the SPIN users …

Investigation Of The Effect Of Vehicle Color On Safety, Deogratias Eustace, Fayez Khalaf Alanazi, Peter W. Hovey

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

No abstract provided.

Safety, Operational, And Design Analyses Of Managed Toll And Connected Vehicles' Lanes, Moatz Saad

Electronic Theses and Dissertations

Managed lanes (MLs) have been implemented as a vital strategy for traffic management and traffic safety improvement. The majority of previous studies involving MLs have explored a limited scope of the impact of the MLs segments as a whole, without considering the safety and operational effects of the access design. Also, there are limited studies that investigated the effect of connected vehicles (CVs) on managed lanes. Hence, this study has two main objectives: (1) the first objective is achieved by determining the optimal managed lanes access design, including accessibility level and weaving distance for an at-grade access design. (2) the …

Implications Of Groundwater Plume Transport And Analysis Of Karst Aquifer Characteristics In Central Florida, Daljit Sandhu

Electronic Theses and Dissertations

Groundwater aquifers make up the primary source of drinking water in Florida. It is imperative to protect and maintain water quality to ensure optimal drinking water conditions. Florida is known for being prone to sinkholes due to karst features. One sinkhole event occurred beneath a phosphogypsum stack, and leaked a large amount of radioactive waste in the Floridan aquifer, raising water quality concerns. To study the behavior of contaminant transport, the radioactive waste plume was modeled by coupling hydraulic and chemistry concepts. Adsorption was studied to see if it can serve as a potential remediation solution to the contaminant waste, …

Modeling Of Wrong Way Driving Entries And Developing Innovative Approaches For Evaluating The Effectiveness Of Advanced Wrong Way Driving Countermeasures, Md Imrul Kayes

Electronic Theses and Dissertations

Wrong-way driving (WWD) is a hazardous behavior on interstates, toll roads, and other high-speed limited access facilities. Since WWD crashes are rare, recent researchers have studied WWD events such as WWD 911 calls and WWD citations to understand the overall nature and trend of WWD. It is very difficult to build credible statistical models based solely on crashes due to the small sample size since these are only 3% of all crashes. Modeling of WWD non-crash events can result in more accurate models. A model was developed for Florida limited access facilities to identify roadway factors and traffic characteristics of …

Investigation Of The Effect Of Edge-Oxidized Graphene Oxide (Eogo) On The Properties Of Cement Composites, Yousef Alharbi

Electronic Theses and Dissertations

The use of edge-oxidized graphene oxide (EOGO), produced by a mechanochemical process that allow to deliver a product suitable for large-scale production at affordable cost, as an additive in cement composites was investigated. Comprehensive experimental tests were conducted to investigate the effect of EOGO on the properties of cement composites. The experimental tests were designed for three subtasks: (1) investigation of the performance of EOGO and its mixing method on the strength, pore structure and microstructure of EOGO-cement composites, (2) evaluation of the rheological and fluidity behavior of EOGO-cement paste and mortar, and (3) investigation of the mechanism of the …

Development Of Decision Support System For Active Traffic Management Systems Considering Travel Time Reliability, Whoibin Chung

Electronic Theses and Dissertations

As traffic problems on roadways have been increasing, active traffic management systems (ATM) using proactive traffic management concept have been deployed on freeways and arterials. The ATM aims to integrate and automate various traffic control strategies such as variable speed limits, queue warning, and ramp metering through a decision support system (DSS). Over the past decade, there have been many efforts to integrate freeways and arterials for the efficient operation of roadway networks. It has been required that these systems should prove their effectiveness in terms of travel time reliability. Therefore, this study aims to develop a new concept of …

A System Dynamics Approach On Sustainability Assessment Of The United States Urban Commuter Transportation, Tolga Ercan

Electronic Theses and Dissertations

Transportation sector is one of the largest emission sources and is a cause for human health concern due to the high dependency on personal vehicle in the U.S. Transportation mode choice studies are currently limited to micro- and regional-level boundaries, lacking of presenting a complete picture of the issues, and the root causes associated with urban passenger transportation choices in the U.S. Hence, system dynamics modeling approach is utilized to capture complex causal relationships among the critical system parameters affecting alternative transportation mode choices in the U.S. as well as to identify possible policy areas to improve alternative transportation mode …

Developing A Traffic Safety Diagnostics System For Unmanned Aerial Vehicles Usingdeep Learning Algorithms, Ou Zheng

Electronic Theses and Dissertations

This thesis presents an automated traffic safety diagnostics solution using deep learning techniques to process traffic videos by Unmanned Aerial Vehicle (UAV). Mask R-CNN is employed to better detect vehicles in UAV videos after video stabilization. The vehicle trajectories are generated when tracking the detected vehicle by Channel and Spatial Reliability Tracking (CSRT) algorithm. During the detection process, missing vehicles could be tracked by the process of identifying stopped vehicles and comparing Intersect of Union (IOU) between the tracking results and the detection results. In addition, rotated bounding rectangles based on the pixel-to- pixel manner masks that are generated by …

Investigation Of Computer Vision Concepts And Methods For Structural Health Monitoring And Identification Applications, Chuanzhi Dong

Electronic Theses and Dissertations

This study presents a comprehensive investigation of methods and technologies for developing a computer vision-based framework for Structural Health Monitoring (SHM) and Structural Identification (St-Id) for civil infrastructure systems, with particular emphasis on various types of bridges. SHM is implemented on various structures over the last two decades, yet, there are some issues such as considerable cost, field implementation time and excessive labor needs for the instrumentation of sensors, cable wiring work and possible interruptions during implementation. These issues make it only viable when major investments for SHM are warranted for decision making. For other cases, there needs to be …

Spread Of Emerging Contaminants In Water Distribution Systems, Danielle Pilarski

Dissertations, Master's Theses and Master's Reports

Emerging contaminants are a growing concern to humans and the environment. Studies have shown these contaminants are present in the environment through continuous release into surface waters from wastewater treatment effluent, manufacturing processes, and agricultural use. The effects of these contaminants have been observed in ecological studies, but they have not yet been well studied for long term exposure in humans. These emerging contaminants have also not been well studied to determine the rates at which they decay or how they move through distribution systems. This study aims to determine the importance of decay rate on concentration throughout a distribution …

Investigation Of Dredge Material Dewatering Through Hydraulic And Ground Improvement Methods, Monica Moody

Williams Honors College, Honors Research Projects

Every year almost 1.5 million tons of material is dredged from Lake Erie to allow passage for boat traffic. In the past, this material has been placed back into the open waters of the lake. However, starting July 2020 this will no long be permitted due to the passing of Senate Bill 1. Therefore, secondary uses of this dredging material are being investigated. To be used, the material needs to be quickly dewatered and stabilized. This project consists of literary reviews of two methods of rapid dewatering, hydraulic placement and ground improvement methods. Hydraulic placement dewatering requires the use of …

Fuzzy Multicriteria Decision-Making Model For Time-Cost-Risk Trade-Off Optimization In Construction Projects, M. Ammar Alzarrad, Gary P. Moynihan, Muhammad T. Hatamleh, Siyuan Song

Faculty Publications

As is often the case in project scheduling, when the project duration is shortened to decrease total cost, the total float is lost resulting in added critical or nearly critical activities. This, in turn, results in decreasing the probability of completing the project on time and increases the risk of schedule delays. To solve this problem, this research developed a fuzzy multicriteria decision-making (FMCDM) model. The objective of this model is to help project managers improve their decisions regarding time-cost-risk trade-offs (TCRTO) in construction projects. In this model, an optimization algorithm based on fuzzy logic and analytic hierarchy process (AHP) …

Development Of A Readiness Model For The Application Of Precast Concrete In Housing Construction: A Case Study In Myanmar, Aung Phone Myint

Chulalongkorn University Theses and Dissertations (Chula ETD)

Precast concrete construction has been verified that it is one of the solutions for the growth of urbanization and housing development. In addition, it helps to reduce the labor requirement and material wastage in construction. However, the use of precast concrete technology is not still popular and not widely used within the Myanmar housing construction industry. Moreover, there is no readiness assessment model encompassed the readiness of construction industry including major stakeholders who are representatives of the construction industry for accepting the new technology. Therefore, the aim of this study is to develop a readiness model that can assess the …

A Study On End-Anchorage And Bond Behavior Of Steel-Fiber Reinforced Cementitious Matrix Composites Externally Bonded To A Concrete Substrate, Christopher Michael Moore

Masters Theses

"Fiber reinforced cementitious matrix (FRCM) composites are a strengthening material consisting of continuous fibers embedded in an inorganic matrix that have the potential to provide additional flexural and shear strength to concrete and masonry members. When used for external strengthening, however, debonding of the material is often observed due to slippage of the fiber with respect to the matrix, causing loss of composite action and a reduction in load carrying capacity. The composite utilized in this study consisted of continuous steel fibers embedded in an inorganic cementitious matrix bonded to a concrete prism. Additionally, an end-anchorage system was implemented with …

Development Of Test Methods For Characterizing Extrudability Of Cement-Based Materials For Use In 3d Printing, Jonathan Thomas Kuchem

Masters Theses

"3D printing is the process of creating three-dimensional objects using an automated additive manufacturing process. The 3D printing process has been used with materials such as metals and polymers, but application with cement based materials for the construction industry has yet to be developed. In this research, two main problems were investigated for printing cement based composite materials: extrudability and tensile reinforcement. Fiber-reinforced concrete (FRC) was studied as an internal reinforcing system to increase tensile/flexural strength. First, FRC was studied to investigate mechanical properties and use of fibers from waste tires as an environmentally friendly option. A reference mixture with …

Abrasion Resistant Concrete Mix Design For Cold Climates, Diane Mariah Murph

Masters Theses

“Studded tire usage in Alaska contributes to rutting damage on pavements resulting in high maintenance costs and safety issues. In this study, binary, ternary, and quaternary highly-abrasion resistant concrete mix designs using supplementary cementitious materials (SCMs) were developed. The properties of fresh concrete and mechanical, and durability properties of hardened concrete for these mix designs were then tested to determine an optimum highly-abrasion resistant concrete mixture which could be placed in cold climates to reduce rutting damage. SCMs used included silica fume, ground granulated blast furnace slag, and type F fly ash. Tests including workability, air content, drying shrinkage, compressive …