Civil and Environmental Engineering Commons^™

Passive Cooling In Non-Residential Nearly Zero Energy Buildings: A Thermal Comfort Analysis Based On Measurement, Modelling And Simulation, Adam O'Donovan

Theses

Overheating in non-residential nearly zero energy buildings (nZEBs) presents a major risk to the well-being, productivity and thermal satisfaction of the people who occupy them. As global temperatures are expected to increase in the future, the overheating risk and cooling demand is also expected to increase. Therefore, low cost and low energy solutions that are able to maintain thermally comfortable conditions without the need for mechanical systems will be vital in decarbonising the building stock and ensuring that buildings are comfortable and remain low carbon now and in the future. Passive cooling has long been championed as a low cost …

Post-Earthquake Assessment And Numerical Modeling Of Freestanding Heritage Structures, M. Khalid Saifullah, Christine E. Wittich

Department of Civil and Environmental Engineering: Faculty Publications

Historic and heritage structures are particularly vulnerable to earthquakes, where damage or collapse can not only lead to loss of a structure but also the loss of irreplaceable heritage. Many heritage structures can be classified as freestanding (detached) structures, including unreinforced masonry walls, classical multi-drum columns, and statue-pedestal systems. However, the seismic response of freestanding structures (sliding, rocking, rock-slide, overturning) is poorly predicted by existing methods due to geometric non-linearities as well as sensitivity to interface conditions and modeling parameters. Previous studies have focused on analytical modeling of simplified systems and/or experimentation under controlled laboratory conditions. In contrast, this paper …

Bs News January/February

Building Services Engineering

No abstract provided.

Notched Hollow Square Section Steel Column Buckling, Zia Razzaq, Solomon Tecleab

Civil & Environmental Engineering Faculty Publications

Presented in this paper is an outcome of a study to assess the effect of section loss in the form of longitudinal notches on the buckling load of hollow square section steel columns. The theoretical study includes buckling load estimates based on both an iterative equilibrium as well as a non-iterative energy approach. Buckling loads based on sample laboratory experiments are also presented. The study shows that the presence of a notch can significantly reduce the axial load-carrying capacity of a steel column.

Walker, Dorian (Fa 1240), Manuscripts & Folklife Archives

Folklife Archives Finding Aids

Finding aid only for Folklife Archives Project 1240. Collection of oral history interviews with railroad employees, locals, and historians recorded on Betacam and Betacam SP for Dorian Walker’s 1995 film Beauty of the Southland. Portions of the interviews were also used for a 2010 miniseries, All Aboard.

Epics Gaqt: Nandi Clean Kitchen Study, Yichen Fan

Engagement & Service-Learning Summit

No abstract provided.

Solar & Rain Catching Canopy "Urban Oasis 2", Afolabi Ibitoye, Cheriyah Wilmot, Alexander Aptekar, Grzegorz Kosieradzki, Kaiyrgul Sultanova, Jude Vallon

Publications and Research

The accumulation of water runoff during rain storms is a major problem in New York City’s combination water systems, forcing water treatment plants to release untreated excess water. To avoid overfilling of the sewer system by this grey water, pocket parks and gardens will be used to absorb the excess rainfall. We will be harnessing nature’s resources with current technologies such as: solar panels combined with rain catching canopies, to beautify the environment, educate the public about sustainability, stimulate growth to local businesses through increased foot traffic and bringing social awareness on environmental issues.

The canopies are designed to collect …

Assessment Of Small-Scale Anisotropy In Stably Stratified Turbulent Flows Using Direct Numerical Simulations, Amrapalli Garanaik, Subhas Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this study, the validity of the widely used Kolmogorov hypothesis of local isotropy of dissipative scales in stably stratified turbulent flows is investigated using high-resolution direct numerical simulations. Departure from isotropy is investigated for the first time in terms of the turbulent Froude number defined as Fr = ϵ/(NEk), where N is the buoyancy frequency, Ek is the turbulent kinetic energy, and ϵ is the rate of dissipation of turbulent kinetic energy. It is shown that for both ϵ and the rate of scalar (density) dissipation, ϵρ, the small-scale statistics are nearly isotropic in the weakly stratified turbulent regime …

Unexpected Setbacks When Excavating – Using Gpr For Mitigating Risk: A Case Study, Samuel L. Marcum

Construction Management

Whether constructing on undeveloped land or on an existing developed site, there is a risk of encountering unexpected objects when excavating. With today’s technology in Ground Penetrating Radar (GPR), this risk can generally be mitigated. Using Whiting-Turner’s construction of Stanford University’s new ChEM-H & SNI Building as an example, this case study discusses the use of GPR for underground mapping, as well as various ways to implement GPR technology. The ChEM-H & SNI site had many underground utilities that required precise pot-holing to verify locations. Although pot-holing is widely used, it is a destructive method, it is time and labor …

Habitat For Humanity: A Student-Led Service Trip To Thailand, Amber Reiff

Purdue Journal of Service-Learning and International Engagement

Amber Reiff started volunteering with Habitat for Humanity in high school and joined the Purdue Student Chapter as a freshman in 2014. During her sophomore year, she became more involved and held the position of Vice President of Development. While serving in this role, she planned on-campus advocacy events and recruited volunteers for Saturday site builds. In 2017, she traveled to Lampang, Thailand, over spring break with a group of like-minded students striving to make a difference. In this article, she shares her experiences on this trip and explores the impact of her participation. Beyond this trip, she has continued …

Climate Futures 1| Climate Futures, Design And The Just Transition, Schedule, Liberal Arts Division, Ncss Graduate Program

Climate Futures Symposia

Schedule of events distributed at the Symposium.

Bs News November/December

Building Services Engineering

No abstract provided.

The Bridge Newsletter Winter 2018, Missouri University Of Science And Technology

The Bridge Newsletter

-Pouring the cornerstone for the ACML
-Showalter selected as Kiewit Faculty Scholar
-Ma tests a low-cost method of strengthening concrete

The Professional Constructor, Full Issue, Volume 43, Number 02

The Professional Constructor

No abstract provided.

Coir Fiber Reinforced Concrete, Jose De La Serna, Moses Karakouzian

AANAPISI Poster Presentations

This poster exhibits the testing and research done on general Portland Cement Concrete with the addition of coir (coconut) fibers as reinforcement. Using the fundamental constituents of cement (water, cement, fine and coarse aggregate) and processed coir fiber, concrete specimens were batched to test for compressive and flexural strengths (per appropriate ASTM standards). Cylindrical and rectangular beam specimens were subjected to loadings until failure occurred. The capacity and modes of failures of the specimens were observed. It was determined that:

• The addition of processed coir fibers decreases the overall strength of general Portland Cement Concrete. • The tested concrete’s …

The Adoption Of A Design Build Approach In Retrofit Projects – A Descriptive Case Study, Lloyd Scott

Conference papers

The delivery Design Build projects across the built environment in Ireland has begun to take significant shape. There are many examples of the traditional are moving towards more collaborative practices. There exists support for the integration of a design build project approach in the retrofit realm where designer, client and developer can work collaboratively. As with the regular design build process the intent behind this collaborative approach is to encourage those associated with the built environment to consider how retrofit design and construction can contribute positively to addressing elements of climate change and the design build process. The opportunity to …

What You Don’T See, Brent Sturlaugson

Architecture Faculty Publications

Follow the supply chains of architecture and you’ll find not just product manufacturers but also environmental polluters and elusive networks of financial power and political influence.

Bs News September/October

Building Services Engineering

No abstract provided.

Application And Usage Of Design-Build By State Dots, Dennis Bausman, Mashrur Chowdhury, Christopher Cummings, Sasi Selvan

The Professional Constructor

This study examines the usage of design-build by the Department of Transportation (DOT) of the 50 states in the United States. Design-build has been growing in popularity as a procurement form in both the private and public sectors, and in the last ten years many DOTs have started or expanded programs to use design-build for infrastructure projects. However, many DOTs are still struggling to determine the best application of design build and how to incorporate its use as a procurement method for DOT projects. This study examines how state DOTs are using design-build, when they are using this delivery method, …

Assessment Of Electrical Contractors’ Perception And Practices With Project Risk Management, Anthony J. Perrenoud

The Professional Constructor

Project Risk Management is a critical construction management skillset for identifying risks, assessing risks, strategizing, and executing risk mitigation plans. Proactive risk management has been found to reduce negative impacts to project objectives and increase customer satisfaction. To improve project risk management contractors have a method of measuring perceptions and practices of risk management, also known as risk maturity. Previous research has identified a model for measuring five major attributes of risk maturity they are (1) management’s perspective of risk management; (2) organizational risk culture; (3) risk identification; (4) risk analysis; and, (5) standardized risk management process. This study presents …

Collaborative Risk Mitigation Through Construction Planning And Scheduling, Lane Kay Coble

The Professional Constructor

No abstract provided.

Construction Disputes In The United States And The United Kingdom: A Comparison, Anusree Saseendran, Ben F. Bigelow, Zofia Rybkowski, Dawn Jourdan

The Professional Constructor

Construction disputes are on the rise globally. They adversely affect the progress and quality of a construction project by resulting in cost overruns and delays. They are also time-consuming and expensive to resolve. Hence it is valuable to identify the most disputed topics in construction in the US and compare them to those in a different country. This helps better understand disputes, and the influence that culture and the difference in the nature of construction in the regions may have on disputes. This study was an attempt to identify and compare the most disputed topics in construction in the United …

Examining The Microeconomics Of Bid Difference Of Engineer & Contractor Bids In Highway Construction, Robert Ryan, Randy R. Rapp, Mark Shaurette, Sarah Hubbard

The Professional Constructor

This study examines microeconomic factors that affect Bid Difference between the designer’s Engineer’s Estimate and the contractor’s Winning Bid. Historically, the accuracy of the Engineer’s Estimate and the Winning Bid vary. To account for this discrepancy, the Federal Highway Administration (FHWA) recommends a contingency be included in all Engineer’s Estimates. Statistical analysis was performed to determine if state Departments of Transportation (DOTs) were currently meeting the recommended Bid Difference values. Data was collected from California, North Carolina, and Ohio from 2012 through 2014. Statistical analysis indicates that current practices to develop an Engineer’s Estimate met the FHWA recommended values. With …

Designing A Modular Building: A Case Study For Modular Vs.Conventional Design For An Apartment Building, Christine Piper, Arun Thodupunoori

The Professional Constructor

To alleviate the diminishing number of tradespeople in the US construction industry, modular construction is an alternative construction process that could be used for repetitive construction applications. However, there are some misconceptions about modular construction including: limited architectural design options, design restrictions, lower quality, unaffordable and inability to design for sustainability. Modular construction is a process that streamlines the construction process and saves a significant amount of time while delivering a high quality building. In response to the misconception of design options, this case study presents the design considerations for transforming an apartment building that was designed and constructed using …

Measuring Landscape Performance: Case Study Investigation, Hannah Michelle Lopresto, Brandon Zambrano, Catherine De Almeida

UCARE: Research Products

Participating in the Landscape Architecture Foundation’s 2018 Case Study Investigation has been an incredibly informative experience for our research team at the University of Nebraska-Lincoln. We are eager to shine a spotlight on the landscape performance of two Great Plains projects: P Street Corridor, a revitalized downtown streetscape in Lincoln, Nebraska, and Tom Hanafan River’s Edge Park, a waterfront redevelopment in Council Bluffs, Iowa. Working on the post-occupancy study of both projects has been extremely beneficial in understanding how reclaiming underutilized sites can create high-performing landscapes. Both are public projects in urban settings with primary goals of transforming formerly unpleasant, …

High Performance Mortar With 100% Recycled Aggregate Using Titanium Dioxide Nanoparticles, Molly Schrager, Vito Francioso, Arjun Kadakia, Mirian Velay-Lizancos

The Summer Undergraduate Research Fellowship (SURF) Symposium

Concrete and mortar are materials commonly used in construction. Their main compounds are cement, aggregates (sand and gravel) and water. In an effort to increase the sustainability of these materials, the idea of using recycled aggregates from ground old concrete and using it to make mortar and concrete has gained more interest. It has two advantages: it reduces the need to mine for raw materials and lessens the amount of old and defective concrete that is typically put in landfills. But, the use of recycled concrete aggregate lowers the strength of mortars and concretes because the residual compounds in the …

A Framework For Estimating Immediate Interdependent Functionality Reduction Of A Steel Hospital Following A Seismic Event, Emad M. Hassan, Hussam Mahmoud

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Functionality of an infrastructure is its ability to provide its intended services. Maintaining an acceptable level of infrastructure functionality, particularly for critical infrastructure, following an extreme event is vital for effective community recovery. Estimating functionality depends on proper quantification of losses, which requires accurate assessment of infrastructure damage. The damage is presented in the form of fragility functions that are generally developed using nonlinear finite element analysis. To date, no study has been conducted to assess the effect of modeling approach on seismic fragilities of an infrastructure, the associated losses, and functionality reduction. In addition, existing frameworks for estimating functionality …

My Catalyst, Gabrielle Gambino Lyon

Celebration of Learning

Over the course of my internship and shadow program with Pepper Lawson Construction and Ziegler Cooper Architects, I was able to explore the various career paths involved in the design, construction, and civil engineering fields. My work on the construction site of a high-rise apartment building located in the heart of Houston, TX allowed me first-hand experience working and learning alongside project engineers, contractors, building developers, and the construction team.

This project was the perfect confluence of my main areas of interest: structural, mechanical, civil, and environmental engineering, as well as architecture. My daily work consisted of on-site walk throughs, …

Molecular Dynamics Simulation Study On The Possible Factors Affecting Stability Of Ods Steel, M. Mustafa Azeem, Zhongyu Li, Qingyu Wang, Abid Hussian

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Oxide-dispersed-strengthened (ODS) steel has excellent mechanical, thermodynamic and radiation resistant properties, which makes it an important candidate material for high-Temperature reactors applications. Radiation stability of oxide is very important to study at the atomic level. In present case molecular dynamics (MD) simulation is used to study stabilities of Y₂O₃ particles in ODS steel as a function of particle sizes. The size dependence is obvious for particle sizes larger than 2.8 nm. Furthermore, the stabilities depend on charges of Y and O atoms.

Bs News July/August

Building Services Engineering

No abstract provided.