Civil and Environmental Engineering Commons^™

Influence Of Concrete Jacketing On The Performance Of Steel Columns Under Blast Induced Progressive Collapse, Hanan Eltobgy Prof., Mohamed Saeed Refaey Dr., Mohamed Ahmed Aboshok Dr., Ahmed Emadel-Din Abdel-Aal Eng.

Journal of Engineering Research

This study investigates the influence of concrete jacketing on the performance of steel columns subjected to blast loading, which can lead to progressive collapse. Using Finite Element Method (FEM) simulations, the research evaluates concrete-encased steel columns with different concrete cover thicknesses to measure their resistance to lateral displacements induced by blasts. Findings reveal that increasing the thickness of the concrete cover markedly improves the column's ability to withstand such loads. The study also highlights that steel has better energy dissipation properties than concrete. It examines how the combined challenges of progressive collapse and blast loading influence the overall structural response …

On The Turbulent Viscosity Parameter Cμ In The K–Ε Model, Harshit Mishra, Subhas Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Reynolds-averaged Navier–Stokes (RANS) models depend on empirical constants to close the Reynolds stress terms. The empirical constants were obtained using experiments conducted at low Reynolds numbers several decades ago. In this paper, we revisit the turbulent viscosity parameter Cμ, based on the stress–intensity ratio c² = |uw|/k. Here, |uw| and k are the absolute values of the Reynolds stress and turbulent kinetic energy, respectively. Through a priori comparisons, we find that the currently accepted value of Cμ = 0.09 does not agree with the latest direct numerical simulation (DNS) and experimental datasets of wall-bounded turbulent planar flows. Therefore, …

Pozzolanic Reactivity Of Carbonated High-Calcium Fly Ash: A Mechanism Study, Gao Deng, Nannan Zhang, Wenyu Liao, Hongyan Ma, Yongjia He, Linnu Lu, Lingyu Chi

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This research investigates the impact of accelerated carbonation treatment on the pozzolanic reactivity of high-calcium fly ash (HFA) by monitoring the reaction heat of HFA/carbonated HFA (CFA)-calcium hydroxide (CH) blends and elucidates the underlying factors influencing the pozzolanic reactivity. The results indicate that in HFA/CFA-CH blends, CFA exhibits a comparable pozzolanic reactivity to that of HFA. This is attributed to the carbonation products accelerating the formation of MonoCarb aluminate (main) and C-S-H, compensating for the reduced heat resulting from the diminished highly reactive components after the carbonation treatment. Additionally, the increased surface area due to carbonation treatment is favorable for …

Seismic Resilience Of Timber Homes, Melia R. Costa

College of Engineering Summer Undergraduate Research Program

The vast majority of residential buildings in California are wood-frame structures. A home is typically a very large investment for families, and damage to the home can be detrimental to a family’s economic success. Thus, reducing the economic impacts of an earthquake on residential timber housing is crucial. A full scale, two-story section of a residential timber house is in construction in the Parson’s Geotechnical and Earthquake Engineering Laboratory on the Cal Poly campus in San Luis Obispo, California. Once built it will be put through earthquake simulation tests on a shake table with various magnitudes of seismic activity. Next, …

Common Ground Newsletter Fall 2024, Missouri University Of Science And Technology

Common Ground

-Internship Experiences

-Lady Softball Trio

-Summer Camps

-Design Teams

Reduction In Scc Form Pressure Through In-Situ Co2 Mineralization, Sean Monkman, Soo Duck Hwang, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

One challenge of using self-consolidating concrete (SCC) for cast-in-place structural applications is that the rheological properties of the concrete (low yield stress and low plastic viscosity) can lead to increased lateral pressure exerted on the formwork. High structural build up and thixotropy can reduce the lateral pressure, thereby allowing for simpler formwork and faster construction. The addition of CO₂ to SCC, in proportions from 0.063 % to 0.250 %, by weight of cement, was investigated as a rheology modifier. The CO₂ served to increase the plastic viscosity with little impact on the dynamic yield stress up to a …

Engineering-Enhanced Theatre: How Engineering Involvement Can Aid Regional Theatres, Albert M. Le

Architectural Engineering

Engineering and theatre are disciplines not often associated with each other within regional and small theatre companies in the United States. The distinction between the two fields of study is not simply from the fundamental differences between how each field is taught and practiced, but also the difficulties encountered within a scope of theatre often constrained with limited budget and time for each production. However, when beginning to explore the intersection between engineering and theatre, it is found that the empirical nature of current theatrical practices can be countered, and scenic design and construction can be re-envisioned with engineering involvement …

Understanding Climate Change Adaptation And Gentrification Through The Framework Of Uneven Coastal Development In Keansburg, New Jersey, Zachary Paganini

Dissertations, Theses, and Capstone Projects

This study examines the rapid acceleration of coastal development in the United States despite projections of climate change-induced sea level rise. Like no other developed country, the U.S. has transformed its fragile coastline into sites for leisure, consumption, and retirement. These spaces now face the prospect of more frequent and severe storms, as well as land loss and inundation, due to climate change. This dilemma has sparked debates around coastal resilience, adaptation, retreat, and climate gentrification.

While many studies seek to measure perceptions of climate change risk and vulnerability, this dissertation reverses the question by positioning risk perceptions as an …

Effects Of Titanium Particulates On Concrete Compressive Strength, Ryan Christopher Brunello

Construction Management

Titanium has the potential to increase the compressive strength of concrete. This experiment investigates the impact of titanium admixture on concrete compressive strength, using three different forms of titanium: shavings, flakes, and powder. This experiment goes further, evaluating the effects of varying proportions of titanium admixture, ranging from 1% - 5% by the weight of cement, resulting in 15 different concrete test cylinders and one additional cylinder as the control variable with no titanium admixture. This experiment aims to identify the optimal recipe for concrete mix with titanium admixture which can provide valuable insight to the industry as to how …

Building Services Engineering September/October 2024

Building Services Engineering

No abstract provided.

Molecular Dynamics Simulation Insights Into Rejuvenating Aged Asphalt With Waste Soybean Oil And Polymers, Ke Shi, Feng Ma, Zhen Fu, Jenny Liu, Ruimeng Song, Dongdong Yuan, Yujie Tang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study utilized molecular dynamics simulations to assess the rejuvenation of aged asphalt (AA) with waste soybean oil (WSO) and functionalized SBS polymers, focusing on: 1) constructing and validating models for virgin asphalt (VA), AA, and composite rejuvenated asphalt with WSO and polymers; 2) analyzing diffusion effects and binding abilities in these rejuvenated models; 3) evaluating interface binding and diffusion behaviors in composite rejuvenated models. The addition of functionalized SBS molecules and WSO improved the diffusion rates of various components within these models. Specifically, functionalized linear-SBS (LSBS) molecules demonstrated superior diffusion performance compared to star-SBS (SSBS) molecules. Incorporating WSO and …

Investigation Of The Cohesive Behavior Of Water-Intervened Rejuvenated Sbs-Modified Bitumen, Ke Shi, Feng Ma, Zhen Fu, Jenny Liu, Ruimeng Song, Dongdong Yuan, Yujie Tang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

When water interacts with bitumen, the diffusion and cohesion characteristics between the components of bitumen are negatively impacted. Molecular dynamics simulations were employed to construct various bitumen models, including bitumen–bitumen (without water), water-containing single bitumen, water-containing bitumen–bitumen, and bitumen–water–bitumen models. The primary research objectives were as follows: comparing the changes in the densities of bitumen models with and without water, analyzing the interlayer cohesive energies of bitumen models interacting with water, evaluating the hydrogen bonds in water-containing bitumen models, and characterizing the diffusion behaviors of bitumen components. The results indicated that when water interacted with the bitumen, it filled internal …

The Bioremediation Effect Of Microalgae On Wastewater: A Green Technology Approach, Mohamed Ahmed Reda Hamed Dr, Marwa Abdelfattah Abdallah Dr

Journal of Engineering Research

The present study lays an emphasis on the microalgae-based for simultaneous wastewater bioremediation using Chlorella vulgaris and Micrococcus luteus mixed algal cultures to remove its constituent pollutants, amazing green technology guarantees benefits with the decrease in the formation of dangerous solid sludge. Ten days of fully monitoring laboratory experimental program were performed in batch cultures to investigate the effect of various dominant mixing ratios for attaining wastewater concentrations and different governing temperature ranges on the performance of microalgae treatment. The results revealed that there is a significant impact of both wastewater concentrations and temperature treatment conditions on the capability of …

Effect Of Superabsorbent Polymer On 3d Printing Characteristics As Rheology-Modified Agent, Yu Cun Gu, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study aims to investigate the effects of two superabsorbent polymer (SAP) types, S1 and S2 (with continual absorption and rapid desorption, respectively) as rheology-modified agent on 3D printing characteristics. Three base mixtures were selected with different thixotropic behaviors (i.e., mixtures with high re-flocculation (τfloc), high structuration rate (Athix), and both low τfloc and Athix, respectively). The initial mini-slump flow of 190±10 mm was secured by adjusting superplasticizer (SP) or water demand (increasing w/b by either 0.025 or 0.05). An extrudable region was determined within the range of τfloc (200-890 Pa) and Athix (15-60 Pa/min). The use of the S2 …

Coupled Effect Of Fiber Type And Reinforcement Ratio On Flexural Behavior Of Reinforced Beams Cast With Super Workable Concrete, Jingjie Wei, Le Teng, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated the effect of 5-dimensional hooked-end fiber (5D) on the structural performance of beams and compared its efficiency with other fibers in strengthening structural performance of reinforced concrete (RC) beams with an increase in reinforcement ratio (ρ). The potential of using fibers to reduce the longitudinal rebar based on various design criteria was investigated. The fibers included 5D, a combination of 80 % 3-dimensional hooked-end and 20 % short steel fibers (STST), and two combinations of macro synthetic fibers A and B (MSF). Experimental results indicated that, compared to non-fibrous beams, using 5D was the most efficient in …

Simulation Of Calcium Carbonate Nucleation Processes In Confined C-S-H Nanopores With Different Calcium-Silicon Ratios, Jiao Yu, Kerui Wang, Peixuan Yang, Mengmeng Li, Biqin Dong, Zuquan Jin, Shuxian Hong, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Carbonation curing technology plays an important role in carbon cycling and improving the properties of cement-based materials, while the nucleation and growth mechanism of calcium carbonate (CaCO₃) is still unclear. Based on molecular dynamics simulation, the formation process and nucleation mechanism of CaCO₃ in confined C-S-H nanopores with different calcium-silicon ratios were studied. The results show that the clustering behavior of CaCO₃ in C-S-H nanopores filled with saturated CaCO₃ solution can be divided into three phases, rapid agglomeration stage, slow cluster stage, and stable cluster stage. The aggregation is mainly dependent on ionic bonding for …

Effect Of Absorption Kinetics Of Superabsorbent Polymers On Printability And Interlayer Bond Of 3d Printing Concrete, Yu Cun Gu, Shuyi Zheng, Hongyan Ma, Wu Jian Long, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study examines the effect of the material characteristics of superabsorbent polymers (SAPs) on the printability and interlayer bond strength of 3D printing concrete. Three types of SAP, including two acrylamide-co-acrylic polymers with coarse and fine particle sizes (S1 and S2) and an acrylic copolymer (S3), were employed. The investigated mortar mixtures had a fixed initial mini-slump flow of 195 ± 10 mm and yield stress of 290 ± 25 Pa. The fluidity of SAP-incorporated mortars was maintained by either adjusting the superplasticizer dosage or increasing the water content. Test results indicate that particle flocculation is dependent on SAP absorption …

Extrudability Window And Offline Test Methods To Predict Buildability Of 3d Printing Concrete, Yu Cun Gu, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Investigates the Effect of Thixotropy and Stiffness Evolution on the Extrudability and Buildability of 3D Printing Concrete. Different Types of Supplementary Cementitious Materials and Limestone Filler Were Used to Prepare Mortars with Varying Levels of Thixotropy and Early-Age Stiffness. Mixtures with Yield Stress and Flocculation (Τfloc) of 180–400 and 420–950 Pa, Respectively, Exhibited Adequate Extrudability Without Plastic Collapse. the Printing Was Completed 8–15 Min after Mixing at a Vertical Build-Up Rate of 138 Mm/min. Several Process Parameters, Including Rest Time to Secure a Penetration Resistance of 150 KPa (T150) and Penetration Resistance at Various Rest Times Were Developed …

Rheology Modification Of Flowable Mortar With Co2, Sean Monkman, Soo Duck Hwang, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Rheological Properties of Mortar Samples with Different Additions of CO₂ during Mixing Were Determined. Flowable Cement-Based Mortars at Three Different W/c (0.55, 0.45 and 0.35) Were Produced and the Effects of CO₂ Gas Were Examined on the Fresh Properties of Slump Flow, Yield Stress and Plastic Viscosity. According to the Experimental Results, the Mortar Yield Stress and Plastic Viscosity Increased Faster over Time Than in a Reference System with the Increasing Addition of CO₂ and Greater Effects Were Seen at the Lowest W/c of 0.35 Than at the Others. the Impact of the CO₂ on …

Indefinability Of Effective Stress For Unsaturated Soils, Xiong Zhang, Sandra Houston

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

For decades, researchers have searched for an unsaturated soil effective stress that performs analogously to effective stress for saturated soils and provides some simplifications over net stress and suction approaches. A recent debate is whether problems identified with unsaturated soil effective stress can be resolved via elastoplastic analyses. Effective stress equations are reviewed and categorized as being based on volume change, shear strength, yield, or degree of saturation. These equations are evaluated for consistency with saturated soil effective stress expectations using the Barcelona basic model (BBM), simplified into an integrated elastoplastic framework using the modified state surface approach (MSSA). Under …

Trust: The Inertia Taxonomy Of Trust And Learning Outcomes Of Trust Building Exercises, Ann B. Lyons

All Theses

This study investigates United States construction professionals’ view of trust in the workplace. In particular the focus is on building trust through trust building exercises. In order to accomplish this, a literature review was conducted focusing on trust in the worldwide construction industry. This was followed by interviews with US construction professionals who focus on team building. These interviews informed a survey sent to a wide variety of US construction professionals. The survey had two sections of content questions, 1. view of trust indicators and 2. perception of trust building exercises. Finally, experts in the field of construction team building …

Carbon Capture And Renewable Energy Policies: Could Policy Harmonization Be A Puzzle Piece To Solve The Electricity Crisis?, Mahelet G. Fikru, Fateh Belaïd, Hongyan Ma

Economics Faculty Research & Creative Works

The electricity market crisis, driven by factors such as increased energy demand, rising fuel prices, aging infrastructure, and greenhouse gas emissions, requires a multifaceted approach including the strategic implementation of Carbon Capture and Storage (CCS) technologies, which despite high costs and potential adverse impact on renewable investments, can allow the use of fossil fuels to maintain grid stability, and simultaneously lower carbon footprint. Across the world, several nations are designing financial incentives and improving regulatory frameworks to reduce barriers to the deployment of CCS. However, it is not clearly understood whether and to what extent such policy support would affect …

Investigation Of Faults In Air-Conditioning Systems In Commercial Buildings: Occurrence, Diagnostic Validation, And Energy Impacts, Yuxuan Chen

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

In commercial buildings, fault detection and diagnosis (FDD) tools have been developed for detecting and diagnosing faults in building systems, which can provide useful information regarding fault locations and potential causes of faults, so that building operators and facility staff can be notified in time and quickly respond as problems arise. Nowadays, there are many commercial FDD tools available in the market, and these tools have been widely adopted in large- and medium-scale commercial buildings in the United States. Several studies have demonstrated the energy saving potential with the use of FDD in commercial HVAC systems, and one critical aspect …

Integrating Artificial Intelligence And Augmented Reality For Enhanced Task Performance In The Construction Industry, Aasish Chandrika Bhanu

All Dissertations

The Architecture, Engineering, and Construction (AEC) sector, characterized by its complex tasks, often faces challenges in adopting cutting-edge technologies, a trend that can significantly hinder productivity improvements compared to other industries. This dissertation explores the emerging integration of Artificial Intelligence (AI) and Augmented Reality (AR) within the AEC domain, investigating how effectively this can be implemented to potentially revolutionize industry practices. AI could be used in the AEC domain for advanced analytical and decision-making processes, while AR could be used for training, visualization, and remote collaboration.

In scenarios where construction site workers require expert guidance, these technologies could be helpful. …

Development Of Multivariate-Coupled Grouting Diffusion Model For Rcc, Xiao Sun, Yao Wang, Hengrui Liu, Zhuanjia Yang, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Grouting Quality of Grout-Enriched Roller Compacted Concrete (RCC) is Difficult to Be Quantified Due to the Fact that the Crucial Effects, Such as Infiltration and the Compaction of the Skeleton of the RCC, Are Not Taken into Consideration. Combined with Model Testing, This Study Proposes an Improved Grouting Prediction Model Which Considers the Coupling Effect of Pore Fractal Properties, Time Variation of Grout Rheological Properties and Infiltration. Moreover, the Influence of Construction Parameters Such as Grouting Parameters, Construction Period Selection, Grouting Pipe Arrangement on the Grouting Effect Was Clarified. the Tests Indicated that the Maximum Diffusion Range of Slurry …

Prediction Of Noise From A Construction Site, Amira Mostafa Ibrahim Miss, Nashwa Mohamed Yossef Prof, Adel Ibrahim Eldosouky Emeritus Professor

Journal of Engineering Research

Construction activities significantly contribute to environmental noise pollution, affecting workers' health and the surrounding community, posing significant challenges to human well-being and productivity. This paper presents a prediction method and a modelling technique used to assess construction site noise. Various factors influencing noise generation and propagation, such as equipment types, operational conditions, site characteristics, and environmental factors, are discussed. This paper explores the application of Monte Carlo technique as an effective method for predicting construction site noise and planning noise mitigation strategies.

Form Pressure Exerted By Concrete For A Large-Scale Structure: Its Quantification And Physicochemical Interpretation, Tae Yong Shin, Seongho Han, Jin Hyun Lee, Jae Hong Kim

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Securing safety in formwork is one of the most important tasks to be carried out in the initial stage of construction. The form pressure exerted by fresh concrete needs to be identified, and it should be retained by a formwork system. A design pressure is given in literature and standards, but for large structures its precise prediction is required through a detailed analysis or a mock-up test. This study reports the lateral form pressure distribution generated by fresh concrete through a series of mock-up tests. The tests are designed considering the placement for nuclear containment structures; 3.4 m tall and …

Synergetic Effect Of Viscosity Modifying Admixtures And Polycarboxylate Ether Superplasticizer On Key Characteristics Of Thixotropic Uhpc For Bonded Bridge Deck Overlay Rehabilitation, Le Teng, Ming Jin, Jiadi Du, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Thin bonded ultra-high-performance concrete (UHPC) overlay is an advanced technology for bridge deck rehabilitation. UHPC should be tailored to secure adequate flowability and high thixotropy to facilitate mixing and placement with a low risk of sagging of the material on sloped bridge deck surfaces. The synergetic effect between nano clay (NC) and polycarboxylate ether (PCE) superplasticizer or cellulose-based viscosity modifying admixture (VMA) and PCE on the rheological properties (yield stress, plastic viscosity, and thixotropy), cement hydration, autogenous shrinkage, compressive strength, and porosity was systematically investigated. The bond strength between conventional concrete (CC) representing existing bridge deck concrete and thixotropic UHPC …

In Situ Synthesis, Characterization And Photocatalytic Efficacy Of Silver-Enhanced Mxene And Graphene Nanocomposites, Kishore Chand, M. Mustafa Azeem, Muhammad Nazim Lakhan, Mukhtiar Ahmed, Muhammad Jehanzaib Aslam, Ahmer Hussain Shah

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The emergence of 2D materials has significantly expanded the wide range of nanomaterials with diverse applications. Notably, their high conductivity, catalytic efficiency, and hydrophobicity have fueled heightened research interests for water treatment applications. This research aimed to investigate the synthesis and characterization of MXene and reduced graphene oxide (rGO) nanocomposites with silver nanoparticles (Ag) for enhanced catalytic activity in the decomposition of Direct Blue-24 dye. In this study, we employed well-established methods, previously documented in the literature, to prepare two distinct nanocomposites. Novel nanocomposites, namely reduced graphene oxide–silver nanoparticles (rGO–Ag) and MXene–silver nanoparticles (MXene–Ag), were synthesized using the hydrothermal and …

In Situ Synthesis, Characterization And Photocatalytic Efficacy Of Silver-Enhanced Mxene And Graphene Nanocomposites, Kishore Chand, M. Mustafa Azeem, Muhammad Nazim Lakhan, Mukhtiar Ahmed, Muhammad Jehanzaib Aslam, Ahmer Hussain Shah

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The emergence of 2D materials has significantly expanded the wide range of nanomaterials with diverse applications. Notably, their high conductivity, catalytic efficiency, and hydrophobicity have fueled heightened research interests for water treatment applications. This research aimed to investigate the synthesis and characterization of MXene and reduced graphene oxide (rGO) nanocomposites with silver nanoparticles (Ag) for enhanced catalytic activity in the decomposition of Direct Blue-24 dye. In this study, we employed well-established methods, previously documented in the literature, to prepare two distinct nanocomposites. Novel nanocomposites, namely reduced graphene oxide–silver nanoparticles (rGO–Ag) and MXene–silver nanoparticles (MXene–Ag), were synthesized using the hydrothermal and …