Civil and Environmental Engineering Commons^™

2016 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

A Comparative Life Cycle Assessment For Utilising Laminated Veneer Bamboo As A Primary Structural Material In High-Rise Residential Buildings, Philip Kavanagh

Masters

In a time when construction is ranked as one of the world’s least sustainable industries consuming about half of the world’s non-renewable resources (Hinson, 2012), it is important to develop and advance the methods and means by which we select and use building materials and how we design, engineer and construct our architecture. This research aimed to evaluate a method for utilising laminated veneer bamboo (LVB) as a primary structural material in high-rise residential buildings and evaluate the environmental potential of LVB through a comparative life cycle analysis (LCA). The process of life cycle analysis was completed through the development …

Analysis Of The Cost Effectiveness Of Combined Particle And Activated Carbon Filters For Indoor Ozone Removal In Buildings, Josh R. Aldred, Erin Darling, Glenn Morrison, Jeffrey Siegel, Richard L. Corsi

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study involved the development of a model for evaluating the potential costs and benefits of ozone control with combined particle/activated carbon filtration (referred to here as activated carbon filtration) in buildings. The modeling effort included the prediction of indoor ozone and ozone reaction products with and without activated carbon filtration in the HVAC system. Benefitto- cost ratios were estimated for various types of buildings in 12 American cities in 5 different climate zones. Health benefits were evaluated using disability-adjusted life-years attributed to the difference in indoor ozone concentration with and without activated carbon filtration and included city-specific age demographics …

An Introduction To The Special Issue On Geoscience Papers Of The Future, Cédric H. David, Yolanda Gil, Christopher J. Duffy, Scott D. Peckham, S. Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Advocates of enhanced quality for published scientific results are increasingly voicing the need for further transparency of data and software for scientific reproducibility. However, such advanced digital scholarship can appear perplexing to geoscientists that are seduced by the concept of open science yet wonder about the exact mechanics and implications of the associated efforts. This special issue of Earth and Space Science entitled "Geoscience Papers of the Future" includes a review of existing best practices for digital scholarship and bundles a set of example articles that share their digital research products and reflect on the process of opening their scientific …

No Reduction By Propane Over Monolithic Cordierite-Based Fe/Al2o3 Catalyst: Reaction Mechanism And Effect Of H2o/So2, Hao Zhou, Yaxin Su, Wenyu Liao, Wenyi Deng, Fangchuan Zhong

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The selective reduction of NO by C₃H₈and the sensitivity to H₂O and SO₂have been studied over monolithic cordierite-based Fe/Al₂O₃catalysts, which were prepared by the sol–gel and impregnation method. The catalysts were investigated by N₂ adsorption, X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS) and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) techniques. Results showed that NO reduction was more than 90% in the absence of oxygen at 500 °C and in the presence of oxygen at 600 °C respectively. In a continues …

Thermal Envelope Analysis Of Local Authority Low Rise Housing Based On Stock Aggregation Theory Using A Remote Feature Extraction Technique., James Pittam

Theses

Understanding the buildings thermal envelope is paramount to analysing existing problems which facilitate cold bridging and low surface temperatures. As no detailed housing stock database is in existence in Ireland which describes the geometrical configuration of the existing housing stock, and to create one would be a major challenge, this research set out to develop a high speed remote cataloguing and geometrical data extraction methodology to build such a database. Replacing traditional measurement methods with a remote method allows for the rapid extraction of fagade information. A remote surveying process is proposed named, the Virtual Survey Method, for the classification …

Properties Of Self-Compacting Concrete With Recycled Coarse Aggregate, W. C. Tang, P. C. Ryan, H. Z. Cui, W. Liao

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The utilization of recycled concrete aggregate (RCA) in Self-Compacting Concrete (SCC) has the potential to reduce both the environmental impact and financial cost associated with this increasingly popular concrete type. However, to date limited research exists exploring the use of coarse RCA in SCC. The work presented in this paper seeks to build on the existing knowledge in this area by examining the workability, strength, and fracture properties of SCCs containing 0%, 25%, 50%, 75%, and 100% coarse RCA. The experimental programme indicated that at RCA utilization levels of 25% to 50% little or no negative impact was observed for …

Pumping Of Fresh Concrete: Insights And Challenges, Geert De Schutter, Dimitri Feys

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Pumping of Fresh Concrete is of Utmost Importance for Concrete Practice. Required Pumping Pressures Are Typically Estimated based on Design Charts. However, with the Increased Use of Chemical Admixtures and the Development of More Flowable Concrete Mixtures, the Accuracy of Traditional Design Charts is Questioned. in Recent Years, Significant Progress Has Been Obtained in Understanding the Flow of the Material in the Pumping Pipe, Including the Behavior of the Lubrication Layer Near the Pipe Surface. in Comparison with Traditional Design Charts, This Results in More Reliable Pressure Predictions When Considering Very Fluid Concrete Types Like Self-Consolidating Concrete. Some Remaining Challenges …

Geotechnical State-Of-The-Art In Guatemala -- Ground Stabilization, Fernando Rafael Callejas Benitez

Doctoral Dissertations

"History provides an understanding of the present and in a way, a guide for the future. The state-of-the-art is often referred to as a snapshot of the most significant works and contributions made in a field of study; In this case the focus is on Guatemalan geotechnical engineering. This study presents a comprehensive description of the different events that impulse geotechnical engineering in Guatemala.

As part of the description of the state-of-the-practice an investigation of the different human (engineers/contractors) and physical resources (laboratories/field equipment) and their capabilities are presented. An overview of the civil engineering programs is presented. Then, the …

Lateral-Torsional Buckling Of Frp I-Section Beams, Mojtaba B. Sirjani, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

This paper presents the outcome of an experimental and theoretical investigation into the load-carrying capacity of Fiber Reinforced Polymer (FRP) I-section beams subjected to four-point loading. The overall lateral-torsional buckling, web and flange local buckling as well as material rupture load estimates are also made using the American Society of Civil Engineers Load and Resistance Factor Design (ASCE-LRFD) Pre-Standard for FRP Structures. Lateral-torsional buckling failure mode is found to govern for each of the beams studied. The study also revealed that the height of applied loads relative to the shear center has a very significant influence on lateral-torsional buckling load …

Elasto-Plastic Transient Dynamic Response Of Tubular Section Steel Cantilever Beam Under Impact Loading, Alial Aloosi, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

This paper presents the outcome of an experimental and theoretical investigation into the loadcarrying capacity of Fiber Reinforced Polymer (FRP) I-section beams subjected to four-point loading. The overall lateral-torsional buckling, web and flange local buckling as well as material rupture load estimates are also made using the American Society of Civil Engineers#x2019; Load and Resistance Factor Design (ASCELRFD) Pre-Standard for FRP Structures. Lateral-torsional buckling failure mode is found to govern for each of the beams studied. The study also revealed that the height of applied loads relative to the shear center has a very significant influence on lateral-torsional buckling load …

Assessing Downstream Stormwater Impacts For Urban Watershed Planning, Johanna Meyer Pavlowsky

Masters Theses

"The urbanization of watersheds has caused debilitating effects to downstream aquatic ecosystems in catchments and streams. The implementation of green infrastructure (GI), such as permeable pavements and bioretention facilities, has been shown to alleviate these effects by both reducing runoff and mitigating pollutants; however, the implements are often not designed with a specific goal of water improvement. This study targets understanding a small, impaired urban watershed, and the benefits green infrastructure may have to provide environmental, social, and economic improvement to the watershed.

Portions of Rolla including much of the S&T campus drain into the impaired urban waterbody Frisco Lake, …

Identification Of Key Performance Tasks To Demonstrate The Benefit Of Introducing The Facilities Manager At An Early Stage In The Building Information Modelling Process On Public Sector Projects In Ireland., Barry Mcauley

Doctoral

Modelling (BIM) governed process was investigated in this thesis. Governments are now seeking a more rewarding methodology in the management and procurement of public sector building assets. This has seen an integrated focus by International Governments on BIM as a partial solution in both managing and procuring public sector building assets. Despite BIM bringing the Facility Manager closer to project conceptualisation, there was still a reluctance and a lack of perceived benefits of having them involved earlier in the design phase. There remains a lack of clear evidence on what improved contribution the Facilities Manager can provide. This thesis provides …

An Exploration Of Structural Timber Innovation, Simon Beskitt

Williams Honors College, Honors Research Projects

In many undergraduate programs of study, civil and structural engineering students are exposed to introductory material regarding timber construction. The information received in the undergraduate experience typically consists of a brief summary of the basic mechanical properties of wood but does not significantly cover timber design. Much greater emphasis is placed on design practices involving steel and concrete, likely due to their prominence in contemporary building trends in civil engineering. While it is true that wood is one of the older materials in terms of its utilization in structural and architectural design, it is certainly not an antiquated choice. Wood …

Bs News January/February

Building Services Engineering

No abstract provided.

The Effect Of Community Connectivity On Water And Sanitation Systems In Rural Panama, M.C. Moritz

Dissertations, Master's Theses and Master's Reports

The world has yet to realize universal access to water and sanitation. Various academic and professional fields provide frameworks for understanding water and sanitation access, but none directly consider the impact of community connectivity. Community connectivity refers to the infrastructures linking rural communities with urban centers. These infrastructures fall under the broad categories of transportation, energy, and telecommunication. This paper examines 23 rural Panamanian communities and compares connectivity measures with the functionality of the communities’ rural water and sanitation systems (RWSS). Community connectivity was evaluated with the Community Connectivity Analysis Tool (CCAT), while the water and sanitation systems were evaluated …

Influence Of The Substrate Characteristics On The Bond Behavior Of Pbo Frcm-Concrete Joints, Tommaso D'Antino, Lesley H. Sneed, Christian Carloni, Carlo Pellegrino

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Fiber Reinforced Cementitious Matrix (FRCM) composites can be employed as a valid alternative to Fiber Reinforced Polymers (FRP) composites for strengthening existing reinforced concrete (RC) structures. The weakness of FRCM-concrete joints has been reported to be at the matrix-fiber interface rather than within the concrete substrate, as is usually reported in the case of FRP-concrete joints. The experimental investigations regarding FRCM strengthening available in the literature have been performed by applying the FRCM composite onto a surface that was treated before the application, usually by grinding or sandblasting. However, the role of the substrate characteristics on the failure mechanism of …

A Hybrid Approach For Increasing Baffling Factors In Contact Tanks, Justin J. Kattnig, Subhas K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A novel approach using a hybrid combination of internal baffles and industrial packing material is investigated in order to optimize the hydraulic residence time of a 1,500-gal rectangular concrete tank. Hydraulic residence time, which is commonly classified using the baffling factor (BF), was determined from residence time distribution curves obtained using both computational fluid dynamics (CFD) simulations and physical tracer studies. CFD simulations were used to model two scenarios. The first scenario was a base system consisting of an unbaffled concrete tank, and the second scenario was a two-baffle system. Computational simulation results were experimentally validated via tracer studies on …

Subjective Perception Of Varying Reflection Densities In Room Impulse Responses, Hyun Hong

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Reverberation time (RT) is a metric commonly used to describe room acoustic conditions, but different rooms which have the same reverberation time can have different reflection densities. Much less is known about how humans perceive different reflection densities and how sensitive humans are to changes in reflection density. Previous investigations in the existing literature have studied the upper limit of distinguishable reflection density using artificial impulse responses, but not with more realistic impulse responses simulated in room acoustic software or measured from real rooms. The aim of this dissertation is to investigate methods for quantifying reflection density from measured impulse …

Block Sparse Memory Improved Proportionate Affine Projection Sign Algorithm, J. Liu, S. L. Grant

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A block sparse memory improved proportionate affine projection sign algorithm (BS-MIP-APSA) is proposed for block sparse system identification under impulsive noise. The new BS-MIP-APSA not only inherits the performance improvement for block-sparse system identification, but also achieves robustness to impulsive noise and the efficiency of the memory improved proportionate affine projection sign algorithm (MIP-APSA). Simulations indicate that it can provide both faster convergence rate and better tracking ability under impulsive interference for block sparse system identification as compared with APSA and MIP-APSA.

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Dublin Institute of Technology since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" …

Radial Strain Behaviors And Stress State Interpretation Of Soil Under Direct Simple Shear, Xin Kang, Yao Cheng, Louis Ge

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Radial strain behaviors and stress state interpretation methods of silica sand consolidated at different K0 values under modified direct simple shear were investigated in this research. Consolidated drained triaxial compression test, direct shear box test, and wire reinforced direct simple shear tests were conducted, and the test results were compared and linked with the modified direct simple shear tests. Based on the observed testing data, simple shear specimens with constant lateral stress exhibited relatively small radial strain during shear, especially under small shear strains. After the peak shear resistance has mobilized, radial strain increased rigorously until the specimen failed. Confining …

Benchmark Problems For Large Strain Consolidation, Patrick J. Fox, Hefu Pu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Modeling of the one-dimensional consolidation process for soil and other compressible porous media is important for a variety of engineering applications. This paper presents solutions for two benchmark problems for large strain consolidation of a saturated soil layer that can be used to check other analytical and numerical analysis methods. The solutions include effects of vertical strain, soil self-weight, nonlinear constitutive relationships, and changing material properties during the consolidation process. High-accuracy data are presented for each problem and include changes of settlement, void ratio, and excess pore pressure with time.

A Comparison Of The Bond Behavior Of Pbo-Frcm Composites Determined By Double-Lap And Single-Lap Shear Tests, Lesley Sneed, T. D'Antino, C. Carloni, C. Pellegrino

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents the results of an investigation on the bond behavior and stress-transfer mechanism of polyparaphenylene benzo isoxazole (PBO) fiber-reinforced cementitious matrix (FRCM) composites bonded to a concrete substrate using double-lap and single-lap shear tests. Results of double-lap shear tests with different composite bonded lengths and widths are presented and compared with those from single-lap shear tests previously reported by the authors. The idealized load response developed from single-lap shear tests is found to characterize the response of the composite in double-lap shear tests, although with a few key differences. With the double-lap shear test, load redistribution among the …

Bs News November/December

Building Services Engineering

No abstract provided.

Stable Isotope-Enabled Pathway Elucidation Of 2,4-Dinitroanisole Metabolized By Rhizobium Lichtii, Hunter W. Schroer, Kathryn L. Langenfeld, Xueshu Li, Hans Joachim Lehmler, Craig L. Just

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Recently developed military explosives are safer to handle, but more environmentally mobile, than traditional explosives. The new insensitive munitions, including 2,4-dinitroanisole (DNAN), have been sparsely studied, making the use of bacterial and/or plant-based remediation approaches unfeasible without further information about the transformation of these compounds. To that end, Rhizobium lichtii isolated from willow tree tissues were studied and observed to completely degrade 5 mg L-1 DNAN within 24 h in liquid media with added carbon and nitrogen. The use of DNAN, [13C6] DNAN, and [15N2] DNAN enabled the identification of 11 previously unknown metabolites resulting from sulfation, acetylation, and/or methylation …

Designing A Resilient Building In The Coastal Zone, Don Kranbuehl, David Pryor

October 30, 2015: Beyond Toolkits: Adaptation Strategies and Lessons

No abstract provided.

Seeps And Springs At A Platteville “Observatory” On The River Bluffs, Bj Bonin, Greg Brick, Julia R. Steenberg

Sinkhole Conference 2015

Residential building construction along the Mississippi River bluffs in the 1970s created a unique enclosed outcrop of the Late Ordovician Platteville Formation at Lilydale, Minnesota. This outcrop was examined in early 2013 after a newly-formed spring flooded an elevator shaft the previous year, drawing attention to the foundation conditions. The Lexington Riverside property is a six story condominium complex constructed within the top of the bluff. A two-level underground parking garage was built into the bluff. Bedrock was mechanically excavated to accommodate the construction of the building, creating an unweathered rock surface. The space between the structure and the excavated …

Rans Modeling Of Stably Stratified Turbulent Boundary Layer Flows In Openfoam®, Jordan M. Wilson, Subhas K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Quantifying mixing processes relating to the transport of heat, momentum, and scalar quantities of stably stratified turbulent geophysical flows remains a substantial task. In a stably stratified flow, such as the stable atmospheric boundary layer (SABL), buoyancy forces have a significant impact on the flow characteristics. This study investigates constant and stability-dependent turbulent Prandtl number (Prt) formulations linking the turbulent viscosity (νt) and diffusivity (κt) for modeling applications of boundary layer flows. Numerical simulations of plane Couette flow and pressure-driven channel flow are performed using the Reynolds-averaged Navier-Stokes (RANS) framework with the standard k-ϵ turbulence model. Results are compared with …

Enhanced Series-Parallel Model For Estimating The Time-Dependent Thermal Conductivity Of Fly Ash Soil Mixtures, Xin Kang, Louis Ge

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

An enhanced series-parallel (S-II) model of one-dimensional conductive heat flow through a unit cell was developed to estimate the time-dependent thermal conductivity of Class C fly ash stabilized soils. The unit cell is composed of three separate heat flow paths: a continuous path through solid contacts (soil contacts, fly ash contacts, and soil fly ash contacts) in parallel arrangement, a series-parallel path of solids in a series arrangement with a parallel arranged path of solid-miniscule pores (miniscule portion of solid water and miniscule portion of solid air), and a continuous path through water and air in parallel arrangement. The solid-miniscule …