Open Access. Powered by Scholars. Published by Universities.®

Petroleum Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Missouri University of Science and Technology

Discipline
Keyword
Publication Year
Publication
Publication Type

Articles 391 - 420 of 612

Full-Text Articles in Petroleum Engineering

Tensile Failure During Structural Development Of Single-Layer Buckle Folds, Xiaolong Liu Jan 2013

Tensile Failure During Structural Development Of Single-Layer Buckle Folds, Xiaolong Liu

Masters Theses

"Folds and fold trains of sedimentary strata are among the most common structural traps systems for hydrocarbon reservoirs. The existence of tensile fractures associated to buckle folding is associated to the distribution of extensional strain in the outer arc of the fold hinges. This study investigates the conditions under which tensile stresses develop due to buckling in a realistic in situ stress scenario. By applying a 2D finite element modeling approach, the influence of realistic mechanical stratigraphy (including strain rate, overburden depth, competence contrasts, viscosity, and permeability) on the development of single-layer buckle folds with Newtonian viscous rheology is studied. …


Gas And Water Flow Through Nanoscale Porous Media, Songyuan Liu Jan 2013

Gas And Water Flow Through Nanoscale Porous Media, Songyuan Liu

Masters Theses

"This work provides a lab experiment to describe the fluid diffusion in nanoscale porous media. By using ideal ceramic membranes which have uniform pore size in nanoscale and homogeneous pore distribution instead of shale or tight sandstone which have various pore sizes and complicated pore distribution and structure, a better understanding of fluid flow through nanoscale porous media could be gained.

Core flooding test were conducted by injecting nitrogen and water separately to describe gas and liquid flow in nanoscale porous media. With all the other factors known or controlled, pressure and flow rate were measured to calculate permeability. By …


Comparison Of Square Root Of Time Approach And Statistical Approach To Minimize Subjectivity In The Determination Of Minimum In-Situ Stress, Soumitra Bhaskar Nande Jan 2013

Comparison Of Square Root Of Time Approach And Statistical Approach To Minimize Subjectivity In The Determination Of Minimum In-Situ Stress, Soumitra Bhaskar Nande

Masters Theses

"A formation's minimum in-situ stress is an important parameter to determine for hydraulic fracturing. While minimum in-situ stress, and its orientation, can be measured from triaxial tests on core, it is more common to measure it as closure stress, by performing pressure testing of wells in the field. Closure stress is considered equal to, or a good approximation of the minimum in-situ stress for most cases. The analytical methods applied to such pressure testing include the square root of time plot, G function plot and the G-dP/dG plot. These plots require the engineer to fit tangent lines to the data, …


Computational Fluid Dynamics Flow Comparison Between Openhole Sleeve And Plug-And-Perf Completion In A Hydraulic Fractured Horizontal Well, Viriyah Theppornprapakorn Jan 2013

Computational Fluid Dynamics Flow Comparison Between Openhole Sleeve And Plug-And-Perf Completion In A Hydraulic Fractured Horizontal Well, Viriyah Theppornprapakorn

Masters Theses

"Multi-stage hydraulic fracture completions in horizontal wells have facilitated economic development of natural gas from unconventional and tight gas reservoirs.Industry has relied on two horizontal multi-stage completion technologies: cemented and perforated liner or Plug-and-perf method and Openhole Sleeve Multi-stage method. Each method has its own advantages and disadvantages. However, one of the most important questions is which method yields better gas production? Computation fluid dynamics (CFD) is a powerful tool for solving complex fluid flow problems. In well completion design, CFD plays a significant role aiding the completion engineers on making decision on well completion methods. In this study, a …


Coupled Geomechanical Reservoir Simulation, Amin Amirlatifi Jan 2013

Coupled Geomechanical Reservoir Simulation, Amin Amirlatifi

Doctoral Dissertations

"Founded by Department Of Energy, the Plains CO₂ Reduction (PCOR) Partnership is investigating the Williston Basin as a candidate for sequestering CO₂ emissions from power plants. The State of Missouri, a member of PCOR, lies at the outermost point on the proposed transportation route and consequently faces the highest CO₂ compression and transportation costs. In order to minimize the cost of CO₂ sequestration, it is desirable to find a storage site within the state. The Lamotte sandstone is identified as a suitable sequestration aquifer formation in Missouri with acceptable permeability, porosity, extension, rock strength and water salinity. Using the finite …


Establishing Well Operability Limits For Frac Pack Sandface Well Completions Using A Screen Erosion Model And Well Completion Score Card, Rickey Hendrix Jan 2013

Establishing Well Operability Limits For Frac Pack Sandface Well Completions Using A Screen Erosion Model And Well Completion Score Card, Rickey Hendrix

Doctoral Dissertations

"Completion quality has a direct impact upon the maximum production rate at which a frac pack well should be operated. Best practices for frac pack well completions ensure the highest possible quality for the well completion. A novel frac pack well completion score card was developed based on best practices for frac pack well completions identified through consultation with industry experts. The score card systematically combines and assesses completions data readily available standard completion reports. The outcome of the score card process is a numerical completion quality rating, which combines all well design and frac pack operations information.

The completion …


Investigation Of Wellbore Stability In A North Sea Field Development, Steven Austin Hilgedick Jan 2012

Investigation Of Wellbore Stability In A North Sea Field Development, Steven Austin Hilgedick

Doctoral Dissertations

"Planning drilling operations is key to the development of oil and natural gas fields. As part of well design, wellbore stability and pore pressure analysis are main factors in determining the safe operating window for selecting mud density. The motivation for this research was to conduct wellbore stability based on exploration wells as basis for planning new offshore field developments with deviated and horizontal wells. A second objective was to investigate the use of a probabilistic approach to wellbore stability, and compare it to the conventional deterministic methods, in order to evaluate the value of including a probabilistic approach to …


Modeling Carbon Sequestration In Transition Zone To Optimize Storage Potential, Fang Yang Jan 2012

Modeling Carbon Sequestration In Transition Zone To Optimize Storage Potential, Fang Yang

Doctoral Dissertations

"Shallow aquifers are potential candidates for carbon sequestration because of their wide distribution and low injection cost. Injected CO₂ in a shallow region segregates into two zones according to CO₂ phases within the initial reservoir pressure and the maximum bottom hole pressure: gas zone and transition zone. Transition zone is a better option because of favorable CO₂ properties. This work investigated the CO₂ storage potential in transition zone using the compositional simulator CMG-GEM and a design of experiment software iSIGHT. First, it addressed the basic characteristics of CO₂ sequestration in transition zone, and then modeled CO₂ injection with simultaneous water …


Investigation Of Drillstring Vibration Reduction Tools, Mohammed Fayez Al Dushaishi Jan 2012

Investigation Of Drillstring Vibration Reduction Tools, Mohammed Fayez Al Dushaishi

Masters Theses

"Drilling related problems such as drillstring vibration is an important cause of premature failure of drillstring components and drilling inefficiency. The vibration of drillstring interferes with measurement collected while drilling. In severe cases, drillstring vibration will lead to wellbore instability that will result in an increase in the operation cost. In the late 1980's, a lot of studies and techniques were developed to mitigate drillstring vibration and downhole vibration measurements were introduced to the industry in two forms; real time measurements and memory devices measurements

A study of drillstring vibration of three different wells located in the Norwegian North Sea …


Hydraulic Fracturing Experiments To Investigate Circulation Losses, Maximiliano Liberman Jan 2012

Hydraulic Fracturing Experiments To Investigate Circulation Losses, Maximiliano Liberman

Masters Theses

"In recent years the oil and gas industry has been drilling more challenging wells due to long deviated wells, drilling through already depleted reservoirs, sub salt wells and increasing water depth. A major challenge these wells create is to prevent fluid loss into the formation and wellbore breakouts by having accurately determined the mud weight operational window. In addition to accurately determine the fracture gradient, additives in the drilling fluid have been used to enhance the fracture gradient in an industry process named wellbore strengthening. In order to study the phenomenon of fracture gradient alteration, a hydraulic fracturing apparatus was …


Investigation Of Geosteering In Non-Trivial Geological Settings, Anuroop Pandey Jan 2012

Investigation Of Geosteering In Non-Trivial Geological Settings, Anuroop Pandey

Masters Theses

"The well placement technology has advanced to a stage where we can explore small tolerance targets such as thin reservoirs. Well placement with geosteering, which is the real time adjustment of the well path based on the geological responses to place and maintain the well within the best part of the reservoir, is the technology that has made this progress possible. Geosteering however can get very complex with the increasing heterogeneities of the formations and there is no fixed methodology to devise a steering strategy in such complex geological settings. To accommodate this challenge, we investigated three methods to verify …


Surfactant Enhanced Oil Recovery By Wettability Alteration In Sandstone Reservoirs, Omar Elmofty Jan 2012

Surfactant Enhanced Oil Recovery By Wettability Alteration In Sandstone Reservoirs, Omar Elmofty

Masters Theses

"Recovering more oil from existing oil reservoirs using enhanced oil recovery methods holds the key for meeting future energy demands. Even though wettability is a cornerstone in oil recovery, few studies have focused on increasing oil recovery in sandstone reservoirs through wettability alteration. The objective of this thesis is to prove that altering the wettability of a sandstone rock to preferentially water-wet condition will reduce the remaining oil saturation and thus increase the percentage of recovered oil.

Two commercial surfactants were selected after studying both the phase behavior and the interfacial properties of 30 surfactants with oil and 1.00% sodium …


Geomechanical Characterization Of Reservoir & Cap Rocks For Co₂ Sequestration, Sudarshan Govindarajan Jan 2012

Geomechanical Characterization Of Reservoir & Cap Rocks For Co₂ Sequestration, Sudarshan Govindarajan

Masters Theses

"Geological sequestration of CO₂ has been identified as one method to reduce global emissions of CO₂ and achieve lower levels of CO₂ concentrations in the atmosphere. Geological formations have to be assessed in terms of their capacity, sealing capabilities and economic feasibility before CO₂ sequestration can commence. Potential leakage of injected CO₂ from the reservoir formation could occur due to natural or injection induced faults or fractures in the reservoir or sealing formations. As part of a potential leakage investigation a geomechanical characterization which refers to the assessment of the in-situ stress conditions, rock strength and stiffness properties of the …


Development Of A Shared Earth Model To Investigate Potential For Carbon Dioxide Sequestration In The Springfield Area, Mo, Imowo Celestine Akpan Jan 2012

Development Of A Shared Earth Model To Investigate Potential For Carbon Dioxide Sequestration In The Springfield Area, Mo, Imowo Celestine Akpan

Masters Theses

"Carbon dioxide (C0₂) sequestration has been extensively implemented and explored predominantly in depleted oil reservoirs and deep saline aquifers where the C0₂ is stored under supercritical conditions. A lesser explored option with great potential is based on injection into shallow reservoirs where the C0₂ may not always be in its denser supercritical state. The research evaluates the potential for injecting C0₂ into saline aquifers at depths of ~550-650 meters and formation temperatures of -22⁰C.

To evaluate injectivity and cap rock integrity, reservoir and geomechanical simulations need to be conducted separately and subsequently coupled. A Shared Earth Model is developed utilizing …


Evaluation Of The Reagan And Lamotte Sandstones In Southwestern Missouri For Carbon Dioxide Sequestration, Todd Jeffrey Miller Jan 2012

Evaluation Of The Reagan And Lamotte Sandstones In Southwestern Missouri For Carbon Dioxide Sequestration, Todd Jeffrey Miller

Masters Theses

"Carbon dioxide sequestration has been proposed as a way to reduce anthropogenic carbon dioxide emissions. Several characteristics are required in order for a geologic formation to be suitable for sequestration. There must be an impermeable confining layer to restrain CO₂ migration toward the surface, the porosity and permeability must be high enough to allow for long term injection and substantial storage capacity, and the formation must be strong enough for long term injection to occur without inducing fractures. In this work, The Reagan and Lamotte Sandstones near Springfield, Missouri were evaluated for the potential for carbon dioxide sequestration. The Derby-Doe …


A Methodology For Statistical Propped Fracture Treatment Design In Fluvial Environments, Prue Elizabeth Smith Jan 2012

A Methodology For Statistical Propped Fracture Treatment Design In Fluvial Environments, Prue Elizabeth Smith

Doctoral Dissertations

"Treatment design for hydraulic fracturing historically has been deterministic in nature. In a deterministic design, required variables can be determined and are assumed to be laterally continuous. This is difficult for geologic settings in general, but nearly impossible in fluvial geologic environments where the second assumption is violated.

Recent work has employed statistical methods to account for the complexity and heterogeneity in fluvial environments. Statistical design tools have been used to assist with improving the design process in complex fluvial geologic systems. Currently, the statistical design tools must be created using a "trial and error" process, which requires first completing/fracturing …


Updated Eor Screening Criteria And Modeling The Impacts Of Water Salinity Changes On Oil Recovery, Ahmad Aladasani Jan 2012

Updated Eor Screening Criteria And Modeling The Impacts Of Water Salinity Changes On Oil Recovery, Ahmad Aladasani

Doctoral Dissertations

"Developing technologies for enhanced oil recovery (EOR) from existing oil fields would supply the world's energy needs for several decades. The application of EOR in many major oil-producing countries remains in its conceptual stage. Thermal and gas EOR methods achieve high incremental rates; however, their application range has not broadened significantly as they have matured, while the rate at which new, promising EOR methods such as Low-salinity water flooding (LSWF) are being implemented is alarming. Despite, the potential of LSWF its development and application has been hindered by the lack of consensus concerning its recovery mechanism(s). Every oil reservoir has …


Numerical Simulations Of Fracture Propagation And Sealing: Implications For Wellbore Strengthening, Saeed Salehi Jan 2012

Numerical Simulations Of Fracture Propagation And Sealing: Implications For Wellbore Strengthening, Saeed Salehi

Doctoral Dissertations

"To mitigate the small tolerance between pore pressure and fracture gradients an engineering practice referred to as "wellbore strengthening" is conducted to increase the fracture gradient. The method relies on propping and/or sealing the fractures with specially designed materials. Different competing theories exist for physical wellbore strengthening mechanisms which can be categorized into two groups. The first group explains that strengthening happens as a result of increasing wellbore hoop stress when fractures are sealed while the second group emphasis is on fracture tip isolation with suitable materials and enhancing fracture propagation pressure. The numerical models and lab experiments …


Direct Shear Testing Of Fractured Rocks From Missouri Used To Evaluate Potential Fault Reactivation Induced By Carbon Dioxide Sequestration, Ishan Kumar Jan 2012

Direct Shear Testing Of Fractured Rocks From Missouri Used To Evaluate Potential Fault Reactivation Induced By Carbon Dioxide Sequestration, Ishan Kumar

Masters Theses

"Geological storage projects of CO₂ are designed to maintain secure storage for thousands of years. Carbon Capture and Storage has been identified as one of the methods which is used to reduce global emission of CO₂ and achieve lower concentration of CO₂ in the atmosphere by capturing the CO₂ from the flue gases and storing it in underground formations. Potential leakage of injected CO₂ from the reservoir to the surface is caused by the reactivation of pre-existing faults and fractures which is caused by the change in the state of stresses and the pore pressure. To avoid damage to the …


Strength Adjustable Preformed Particle Gels For Conformance Control, Jia Zhou Jan 2011

Strength Adjustable Preformed Particle Gels For Conformance Control, Jia Zhou

Doctoral Dissertations

"Reservoir heterogeneity and early water breakthrough (also known as fingering) represent two of the greatest challenges to recover crude oil efficiently. Gel treatments have been implemented as a cost-effective method to plug high permeability zones and thus improve sweep efficiency in reservoirs. However, when extensive cross-flows exist between formation layers, gel treatments become less efficient. Polymer was used in polymer flooding to increase the viscosity of the injected fluids and to correct the fingering problem. However, such treatment may be uneconomical since dramatic viscosity loss (80-90%) is caused by shearing degradation during the injection process near the wellbore.

This research …


Enhanced Heavy Oil Recovery By Alkali-Surfactant In The Pennsylvania Warner Sandstone, Rabia Mohamed Hunky Jan 2011

Enhanced Heavy Oil Recovery By Alkali-Surfactant In The Pennsylvania Warner Sandstone, Rabia Mohamed Hunky

Doctoral Dissertations

"In this research, a study of the non-thermal method of alkaline-surfactant (AS) flooding to enhance heavy oil recovery from the Pennsylvanian Warner sandstone reservoir in Western Missouri was conducted. This work includ [sic] testing approximately 30 commercial surfactants and using a heavy oil sample with an API of 17. It was found that a number of surfactants could create stable emulsions. The viscosity of heavy oil could be reduced from 18,518 cp to 2.5 cp at 25⁰C through emulsification of certain surfactants. One of the major findings was that the emulsion created by the commercial surfactant, Igepalʼ CO-530 was stable …


Experimental Study Of The Interaction Between Surfactants And Preformed Particle Gels, Farag Awadh Muhammed Jan 2011

Experimental Study Of The Interaction Between Surfactants And Preformed Particle Gels, Farag Awadh Muhammed

Masters Theses

"Gel and surfactant treatment are two principle methods to reduce water production and enhance oil recovery (EOR). However, either method by itself has limitations that can be avoided by combining the two. Gel treatment can improve sweep efficiency but has little effect on micro-displacement efficiency. Surfactants are mainly used to improve displacement efficiency but have little effect on sweep efficiency. This research sought to investigate whether the combination of gel and surfactant treatments can be used to significantly enhance oil recovery while reducing water production for extremely heterogeneous mature reservoirs. A newer trend in gel treatments is preformed particle gels …


Shale Gas Rock Characterization And 3d Submicron Pore Network Reconstruction, Malek Elgmati Jan 2011

Shale Gas Rock Characterization And 3d Submicron Pore Network Reconstruction, Malek Elgmati

Masters Theses

"Determining shale gas petrophysical properties is the cornerstone to any reservoir-management practice. Hitherto, conventional core analyses are inadequate to attain the petrophysical properties of shale gas at submicron-scale. This study combines interdisciplinary techniques from material science, petrophysics, and geochemistry to characterize different shale gas samples from North America including Utica, Haynesville and Fayetteville shale gas plays. Submicron pore structure, clay mineralogy, wettability and organic matter maturation were investigated to evaluate the petrophysical properties of shale gas rocks and to determine the impact of organic and inorganic matters on wettability alteration for different fracturing fluids on shale gas rocks.

High pressure …


Mesh Optimization Of Finite Element Models Of Wellbore Stress Analysis, Ming-Yen Lee Jan 2011

Mesh Optimization Of Finite Element Models Of Wellbore Stress Analysis, Ming-Yen Lee

Masters Theses

"Numerical modeling methods such as the widely used finite element method provide an excellent opportunity to analyze the wellbore state of stress for a variety of applications such as wellbore integrity, wellbore design or hydraulic fracturing. However, numerical modeling methods introduce errors by nature and may not precisely match the analytical solution if the meshing of the numerical model is not carefully taken care of. This study presents a parametric study of the meshing parameters mesh density, element type, and model size for 2-dimensional and 3-dimensional vertical wellbore models under three different types of boundary conditions, and a guideline for …


Physical Impact Of Waterjet-Based Sediment Remediation On Benthic Organisms, Grace Harper, Andrew Curtis Elmore, Christopher Redell, Gavin Risley, Joel Gerard Burken Jan 2011

Physical Impact Of Waterjet-Based Sediment Remediation On Benthic Organisms, Grace Harper, Andrew Curtis Elmore, Christopher Redell, Gavin Risley, Joel Gerard Burken

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Adding Activated Carbon to Sediments Has Been Shown to Be an Effective Means of Reducing the Bioavailability of Certain Contaminants. the Current State of the Practice is to Mechanically Mix Activated Carbon to a Target Concentration of 3 Percent at Depths of Approximately 30 Cm using a Rotovator or Similar Construction Equipment. Waterjets Have Been Used to Cut Hard Material using a Mixture of Water and an Abrasive. If Activated Carbon is Substituted for the Abrasive, Waterjets Have the Potential to Use Surface Injection as a Replacement for Mechanical Mixing during Sediment Remediation. a Perceived Benefit of Waterjet-Based Sediment Remediation …


Development Of A Waterjet System For Direct Delivery Of Granular Iron And Activated Carbon To Remediate Contaminated Aqueous Sediments, Gavin H.R. Risley, Andrew Curtis Elmore, Joel Gerard Burken, Grzegorz (Greg) Galecki Jan 2011

Development Of A Waterjet System For Direct Delivery Of Granular Iron And Activated Carbon To Remediate Contaminated Aqueous Sediments, Gavin H.R. Risley, Andrew Curtis Elmore, Joel Gerard Burken, Grzegorz (Greg) Galecki

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

While the Techniques and Technologies Associated with Contaminated Sediment Remediation Are Relatively Mature, There Are Several Issues Associated with These Practices that Make Them Unattractive. the Inability of Currently Used Mechanical Mixing Implements to Place Amendments in Aqueous Environments and their Intrusive Behavior toward Benthic Communities Are Just Two Examples of a Necessity for an Improved Delivery Method. Waterjets May Be a Viable Option for Placement of Particulate Remediation Amendments, Such as Activated Carbon and Granular Iron, at Depth. a Custom Waterjet Nozzle and Injection System Has Been Fabricated by the Authors to Examine This Delivery Concept. the Developed Injection …


Numerical Simulation Of Relative Permeability Modifier Effect On Oil And Water Production, Murad Mohammedahmed Abdulfarraj Jan 2011

Numerical Simulation Of Relative Permeability Modifier Effect On Oil And Water Production, Murad Mohammedahmed Abdulfarraj

Masters Theses

"Excess water production is one of the most prevalent operational problems that oil companies are facing. Polymers and polymer gels have been used widely to control excess water production for mature oilfields. It is well known that polymers/gels can reduce the permeability to water (Krw) much more than that to oil (Kro). This phenomenon is called disproportionate permeability reduction (DPR) and the polymers or gels that exhibit this behavior are called relative permeability modifier (RPM). When RPMs are placed in reservoir, reduced permeability to water can lead to decreased water production, and sometimes increased hydrocarbon production, therefore prolonging the useful …


Design Of A Conditioner For Smoothing Wind Turbine Output Power, Murali Bottu, Mariesa Crow, A. Curt Elmore Sep 2010

Design Of A Conditioner For Smoothing Wind Turbine Output Power, Murali Bottu, Mariesa Crow, A. Curt Elmore

Electrical and Computer Engineering Faculty Research & Creative Works

As a result of wind speed intermittency, highly variable wind power output can adversely impact local loads. We propose a conditioner to smooth the variable wind power by utilizing the energy of an ultracapacitor. The conditioner is based on a single phase voltage source inverter (VSI) connected between the grid interconnection point and the ultracapacitor. The shunt VSI injects or absorbs active power from the line to smooth the wind power by utilizing the short term storage capabilities of the ultracapacitor. The ultracapacitor is connected to the DC link through a DC-DC converter, which maintains the voltage of the DC …


Characteristics Of Co₂ Sequestration In Saline Aquifers, Fang Yang, Baojun Bai, Dazhen Tang, Shari Dunn-Norman, David J. Wronkiewicz Feb 2010

Characteristics Of Co₂ Sequestration In Saline Aquifers, Fang Yang, Baojun Bai, Dazhen Tang, Shari Dunn-Norman, David J. Wronkiewicz

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Storage of CO2 in saline aquifers is a viable option for reducing the amount of CO2 released to the atmosphere. This paper provides an overall review of CO2 sequestration in saline aquifers. First, the principles of CO2 sequestration are presented, including CO2 phase behavior, CO2-water-rock interaction, and CO2 trapping mechanisms. Then storage capacity and CO2 injectivity are discussed as the main determinants of the storage potential of saline aquifers. Next, a site section process is addressed considering basin characteristics, reservoir characteristics, and economic and social concerns. Three main procedures are then …


Strength Evaluation And Transportation Behavior Of Preformed Particle Gel Using Screens And Tubes, Rajesh Sarma Challa Jan 2010

Strength Evaluation And Transportation Behavior Of Preformed Particle Gel Using Screens And Tubes, Rajesh Sarma Challa

Masters Theses

"This research included a series of experiments, using screen models to evaluate the strength of swollen gel particles. It also includes the study of PPG propagation and extrusion behavior through tubes of various internal diameters. The effect of the particle gel swelling ratio (depending on brine concentration), flow rate; and mesh size on the gel injection pressure and injectivity were studied. The results show that gel injection pressure depends primarily on the swelling ratio and the mesh size. However, the injection pressure does not increase significantly with injection rates, behavior consistent with the real-time injection pressure and injection rate change …