Petroleum Engineering Commons^™

A New Design Strategy For Sizes Of Polymer Gel Treatments Derived From A Comprehensive Assessment Of Their Case Histories, Munqith Aldhaheri, Abdullah Almansour, Na Zhang, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The incentive to revive brownfield oil production extends the interest to apply polymer gel treatments in injection wells. Virtually, volumes of previous remediations implemented in similar reservoir types are used to size new jobs. Such an analogy-based design procedure imposes a need to evaluate the most frequent designs for each reservoir type based on a comprehensive field survey. This survey provides a new treatment sizing strategy for polyacrylamide-polymer bulk gels by reviewing their field applications in 653 injection wells. The new strategy proposes using the average and most frequent gel volumes per reservoir type as an initial estimate of the …

Development Of Agar-Based Preformed Particle Gel For Water Control In High-Salinity Reservoirs, Ahmed Ben Ali, Reem Elaf, Abdulaziz A. Almakimi, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Oil Extraction Faces Challenges in Cost and Complexity Due to Excessive Water Production, Leading to Diminished Hydrocarbon Recovery. Preformed Particle Gels (PPGs) Hold Promise for Enhancing Oil Recovery and Sealing High-Permeability or Fractured Zones. However, Current PPGs Encounter Limitations in High-Temperature Reservoirs, Including Salt Sensitivity and Potential Hazards. to Address These Issues, We Propose Eco-Friendly PPGs Utilizing Agar Polysaccharides. Agar Backbones Grafted with Acrylamide (AM) and AM/N,N′-Methylenebis(AM) (MBA) Via Microwave-Assisted Techniques Resulted in Polyacrylamide Grafted Agar (Ag/PAM) and Cross-Linked Polyacrylamide Grafted Agar (Ag/PAMBA). Various Sizes (75 Μm to 1.18 Mm) Were Prepared to Accommodate Diverse Reservoir Porosities and Ensure Effective …

A Tilted Broad Plume Underneath The Greenland Cratonic Keels, Dan Wang, Stephen S. Gao, Yangyang Liao, Kelly H. Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

To advance our comprehension of the complex geological history and mantle dynamics in the north atlantic region, we employ all available broadband seismic data recorded in greenland to reveal an abnormal mantle transition zone (mtz) structure. Central and eastern greenland exhibits depressed 410 and 660 km discontinuities (d410 and d660, respectively) bordering the mtz, indicative of a substantial thermal anomaly associated with an underlying plume, surpassing the 1,800°c threshold for post-garnet phase transitions at the d660. Variations in mtz thickness across greenland stem from differing temperature anomalies at the d410 and d660, possibly linked to a tilted plume within the …

Seismicity Characteristics Of The Gulf Of Aqaba Seismogenic Zone And Their Hazard Implications In Northwestern Saudi Arabia, Ali Abdelfattah, Mohamed Ezzelarab, Hazem Badreldin, Hassan Alzahrani, Saleh Qaysi, Bassam Abuamarah, Neil Lennart Anderson

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The seismogenic characteristics of the Gulf of Aqaba zone have been assessed using the maximum likelihood method to estimate various earthquake recurrence parameters. These parameters encompass the β-value, annual recurrence rate (λ), and maximum probable magnitude (Mmax). This assessment has identified three sub-seismogenic zones, each corresponding to specific structural faults within the Gulf. These zones are associated with the Aragonese, Arnona and Aqaba faults, delineating pull-apart basin structures in the Gulf of Aqaba. An updated earthquake catalogue has been compiled using a unified moment magnitude (Mw) scale to improve the analysis, established by developing two empirical relationships. According to the …

Laboratory Evaluation Of High-Temperature Resistant Lysine-Based Polymer Gel Systems For Leakage Control, Tao Song, Xuyang Tian, Baojun Bai, Yugandhara Eriyagama, Mohamed Ahdaya, Adel Alotibi, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In-situ crosslinking gel known for its cost-effectiveness, has been employed for decades to plug high-permeability features in subsurface environments. However, some commonly used crosslinkers are being phased out due to the increasingly rigorous environmental regulations. As a newly discovered environmentally friendly crosslinker, lysine can crosslink the partially hydrolyzed polyacrylamide through transamidation reaction. The present work aimed to study the effect of polymer composition and concentration on the gelation behavior of lysine and high molecular weight acrylamide-based polymers. Several commercial high molecular weight polymers with different contents of 2-Acrylamido-2-methyl-1-propane sulfonic acid (AMPS) including AN-105/125, SAV-55/37/28, and SAV-10 were deployed in this …

Layered Mantle Flow Field Associated With Plate Kinematics And Slab Modulation Underneath The Horseshoe-Shaped Banda Arc-Islands, Sijia Li, Fansheng Kong, Kelly H. Liu, Stephen S. Gao

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The Banda Arc-Continent Collision Zone Signifies One Of The Most Seismically Active And Tectonically Intricate Zones. The High Convergence Rate Across The Region, Coupled With The Exceptionally Arcuate Arc And Subducted Slab, Makes It An Ideal Locale For Investigating Interactions Between Plate (Slab) Kinematics And Plastic Flow In The Asthenosphere, Which Can Be Diagnosed By Seismic Anisotropy From Shear Wave Splitting Analyses. In Total, 206 Pairs Of Splitting Measurements Using Teleseismic SKS, SKKS, And PKS, Along With 43 Pairs Using Local S Phases, Are Obtained By Utilizing Broadband Seismic Data From Five Permanent Seismic Stations. To Reduce The Ambiguity In …

Inverting Geodetic Strain Rates For Slip Deficit Rate In Complex Deforming Zones: An Application To The New Zealand Plate Boundary, Kaj M. Johnson, Laura M. Wallace, Jeremy Maurer, Ian Hamling, Charles Williams, Chris Rollins, Matt Gerstenberger, Russ Van Dissen

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The potential for future earthquakes on faults is often inferred from inversions of geodetically derived surface velocities for locking on faults using kinematic models such as block models. This can be challenging in complex deforming zones with many closely spaced faults or where deformation is not readily described with block motions. Furthermore, surface strain rates are more directly related to coupling on faults than surface velocities. We present a methodology for estimating slip deficit rate directly from strain rate and apply it to New Zealand for the purpose of incorporating geodetic data in the 2022 revision of the New Zealand …

Development Of Inorganically Cross-Linked Sulfonated Polyacrylamide Preformed Particle Gels For Conformance Control: Impact Of Anionic Groups, Reem Elaf, Ahmed Hamza, Hassan Nimir, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Modern oil and gas extraction faces challenges, notably from the surplus of produced water, hampering hydrocarbon recovery and raising environmental and economic concerns. A promising solution is the injection of preformed particle gels (PPGs) into the reservoir's fractures and high permeability zones, facilitating production processes. This study introduces a novel class of inorganically cross-linked PPGs with exceptionally high swelling capacities, comprising sulfonated polyacrylamide cross-linked with aluminum attached to acetate, nitrate, sulfate, and lactate anions individually. These PPGs function as superabsorbents, capable of absorbing water at a ratio of 100-700 times their dry weight while maintaining adequate gel strength up to …

Geodetic Strain Rates For The 2022 Update Of The New Zealand National Seismic Hazard Model, Jeremy Maurer, Kaj Johnson, Laura M. Wallace, Ian Hamling, Charles A. Williams, Chris Rollins, Matt Gerstenberger, Russ Van Dissen

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Geodetic data in plate boundary zones reflect the accrual of tectonic strain and stress, which will ultimately be released in earthquakes, and so they can provide valuable insights into future seismic hazards. To incorporate geodetic measurements of contemporary deformation into the 2022 revision of the New Zealand National Seismic Hazard Model 2022 (NZ NSHM 2022), we derive a range of strain-rate models from published interseismic Global Navigation Satellite Systems velocities for New Zealand. We calculate the uncertainty in strain rate excluding strain from the Taupō rift–Havre trough and Hikurangi subduction zone, which are handled separately, and the corresponding moment rates. …

Upper Plate And Subduction Interface Deformation Models In The 2022 Revision Of The Aotearoa New Zealand National Seismic Hazard Model, Russ J. Van Dissen, Kaj M. Johnson, Hannu Seebeck, Laura M. Wallace, Chris Rollins, Jeremy Maurer, Matthew C. Gerstenberger, Charles A. Williams, Ian J. Hamling, Andrew Howell, Christopher J. Dicaprio

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

As part of the 2022 revision of the Aotearoa New Zealand National Seismic Hazard Model (NZ NSHM 2022), deformation models were constructed for the upper plate faults and subduction interfaces that impact ground-shaking hazard in New Zealand. These models provide the locations, geometries, and slip rates of the earthquake-producing faults in the NZ NSHM 2022. For upper plate faults, two deformation models were developed: a geologic model derived directly from the fault geometries and geologic slip rates in the NZ Community Fault Model version 1.0 (NZ CFM v.1.0); and a geodetic model that uses the same faults and fault geometries …

Prediction Of Surfactant Performance From Surfactant Huff-Puff In Carbonate Reservoirs Using A Data-Driven Approach And Desktop Application Development, Y. Yao, Mingzhen Wei, Y. Cui, M. Ali, J. Leng, Y. Qiu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Surfactants have been widely used to alter the wettability of carbonate rocks from oil-wetness to water-wetness and enhanced oil recovery. One of primary methods implemented in filed applications for enhanced oil recovery is surfactant huff-puff. Currently, a large number of surfactant treatments are conducted in laboratories prior to field applications to optimize the design of surfactant huff-puff, test the performance of surfactants, and minimize failure risk. This process is time-consuming since a treatment could last from several days to more than 300 days. Moreover, a fraction of treatments could not improve oil recovery as reported in the literature. In this …

Pattern Recognition For Wettability Alteration With Surfactants In Carbonate Reservoirs By Using Machine Learning, Y. Yao, Mingzhen Wei, M. Ali, Y. Qiu, Y. Cui, J. Leng

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Surfactants Are Widely Applied Agents to Interact with the Adsorbates on Carbonate Rock Surface, Which Could Alter Wettability from Oil-Wetness to Water-Wetness and Thus Enhance Oil Recovery. Surfactant Huff-Puff is Often Conducted to Achieve Wettability Alteration and Has Been Applied under Various Conditions. Currently, Many Investigations Have Been Reported to Apply Conventional Data Analysis Methods to Analyze Different Sets of Surfactant Huff-Puff Projects. Yet the Application of Machine Learning Algorithms to Reveal the Inherent Patterns is Rarely Reported. in This Study, We Integrate Principal Component Analysis (PCA) with Hierarchical Clustering Algorithm (HCA) to Uncover the Hidden Patterns Embedded in Global …

Assessing The Potential Of Uav-Based Multispectral And Thermal Data To Estimate Soil Water Content Using Geophysical Methods, Yunyi Guan, Katherine R. Grote

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Knowledge of the soil water content (SWC) is important for many aspects of agriculture and must be monitored to maximize crop yield, efficiently use limited supplies of irrigation water, and ensure optimal nutrient management with minimal environmental impact. Single-location sensors are often used to monitor SWC, but a limited number of point measurements is insufficient to measure SWC across most fields since SWC is typically very heterogeneous. To overcome this difficulty, several researchers have used data acquired from unmanned aerial vehicles (UAVs) to predict the SWC by using machine learning on a limited number of point measurements acquired across a …

Geochemical Assessment Of Mineral Sequestration Of Carbon Dioxide In The Midcontinent Rift, Alsedik Abousif, David J. Wronkiewicz, Abdelmoniem Masoud

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This Study Examines The Potential Of Midcontinent Rift Rocks To Facilitate Long-Term CO2 Sequestration By Providing The Necessary Ca And Mg For Carbonate Mineralization. Surface Samples Were Collected From The Oronto And Bayfield-Jacobsville Groups Around Lake Superior And Used For Petrography And X-Ray Diffraction To Determine Their Mineral Composition. Also, X-Ray Fluorescence Was Also Used To Assess Their Bulk Chemical Composition. The Samples Were Then Exposed To CO2 And Deionized Water In Teflon-Lined Vessels At 90°C, And The Resulting Leachate Fluids Were Analyzed For The Cation Released During The Testing. SEM Microscopy Was Used To Examine The Samples For Potential …

Would Self-Supported Fracture Contribute To The Hydrocarbon Production In Shale Reservoir Besides Proppant-Supported Fracture, Y. Sun, G. Li, S. Zeng, J. Wu, J. Liu, M. Xu, C. Dai, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

During hydraulic fracturing in deep shale gas reservoirs, it is difficult to pump proppants long distances, and self-supported fractures are formed at the far and upper ends of the fractures. The self-supported fracture could hold the fracture space by its surface structure again fracture closure. However, it faces various aspects of impairment during shale gas reservoir development, which affect its conductivity. Among the impairment, long-term production results in a decline of bottom hole pressure, which will compact the fracture space, and self-supported fractures without proppant are more sensitive than those with proppant. In this paper, we conducted a series of …

Fe-Ni-Cu-Pge Sulfide Transport Mechanisms And Carbon-Sulfur Interactions In Lower Crustal Magmatic Settings: A Study From The Valmaggia Ultramafic Pipe, Ivrea-Verbano Zone, Italy, Shelby Leann Clark

Masters Theses

"Constraining the processes that control the transport and deposition of sulfides in the deep lithosphere is an important step in expanding ore deposit exploration search space to include exhumed lower crustal rocks. The ultramafic sulfide ore-bearing Valmaggia pipe in the Ivrea-Verbano Zone of NW Italy, an exhumed cross section of the overlying lower continental crust and subcontinental lithospheric mantle, gives critical insight into metallogenic processes in lower crustal settings. The ~300 m wide metasomatized pipe hosts Fe-Ni-Cu-(PGE±Co±Au) sulfide mineralization that is commonly associated with locally abundant carbonates and hydrous silicates (phlogopite, amphibole). Previous studies suggested that sulfides were physically transported …

Fiber Assisted Re-Assembly Preformed Particle Gel For Conformance Control, Zhe Sun

Masters Theses

"In Enhanced Oil Recovery technology today, gel treatments have been implemented as a cost-effective method to improve the oil sweep efficiency in reservoirs by plugging the high permeability zones. This study presents a novel gel composition to be used in conformance control in order to improve oil recovery for mature oilfields.

The product is a fiber-assist re-assembly preformed particle gel which could be generalized to the preformed particle gels (PPG). The product developed in this study could be injected into the reservoir act as a conformance control agent by plugging water thief zones and channels in the beginning process. Due …

Experimental Study: Evaluating The Effect Of Low High Viscosity Friction Reducer Concentrations To Transport Proppant Across Static And Dynamic Models, Ghith Biheri, Abdulmohsin Imqam, Shari Dunn-Norman, Khaled Elmaleh

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Hydraulic fracturing treatments may significantly improve the oil production from wells in unconventional reservoirs by enhancing the fracture conductivities. Fracture conductivity can be improved by efficiently transporting and distributing the proppant through the lengths of the fractures. The main target of this study is to evaluate the viscosity and elasticity of high viscosity friction reducer (HVFR) for the purpose of transport and suspend the proppant at a temperature of 25°C. This study an alyzes the settling of proppant across HVFR using two different concentrations, 0.5 and 1 gallon per thousand of gallon (gpt). The tests were conducted using two static …

A Review Of Dielectric Barrier Discharge Cold Atmospheric Plasma For Surface Sterilization And Decontamination, Kolawole Adesina, Ta Chun Lin, Yue-Wern Huang, Marek Locmelis, Daoru Frank Han

Biological Sciences Faculty Research & Creative Works

Numerous investigations have shown that non-equilibrium discharges at atmospheric pressure, also known as "cold atmospheric plasma" (CAP) are efficient to remove biological contaminants from surfaces of a variety of materials. Recently, CAP has quickly advanced as a technique for microbial cleaning, wound healing, and cancer therapy due to the chemical and biologically active radicals it produces, known collectively as reactive oxygen and nitrogen species (RONS). This article reviews studies pertaining to one of the atmospheric plasma sources known as Dielectric Barrier Discharge (DBD) which has been widely used to treat materials with microbes for sterilization, disinfection, and decontamination purposes. To …

Lessons Learned From Laboratory Study And Field Application Of Re-Crosslinkable Preformed Particle Gels Rppg For Conformance Control In Mature Oilfields With Conduits/Fractures/Fracture-Like Channels, Baojun Bai, Thomas P. Schuman, David Smith, Tao Song

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This Paper Surveys the Role of Re-Crosslink able Preformed Particle Gels (RPPG) in Addressing Conformance Challenges within Mature Oilfields. Despite Widespread Preformed Particle Gel (PPG) Application in 15,000+ Wells, their Limitations in Sealing Fractures and Conduits Prevalent in Mature Reservoirs Have Driven the Development of RPPG Formulations. Synthesized in Various Sizes from Micrometer to Millimeter Levels, These Environmentally Friendly RPPGs Are Tailored for Diverse Reservoir Conditions. Findings Showcase the Successful Laboratory-Scale Creation and Upscaling of RPPG Products, Offering Adaptability to Temperatures from 20 to 175°C, Customizable Sizes, Swelling Ratios (5 to 40 Times), and Re-Crosslinking Times Spanning Minutes to Days. …

Electromagnetic Near-Field Scanning With A Spatially Sparse Sampling Strategy Utilizing Kriging-Dmd, Yanming Zhang, Steven Gao, Lijun Jiang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This paper proposes a hybrid method for time-resolved electromagnetic near-field scanning, merging model-based (Gaussian processes regression model, a.k.a. Kriging method) and data-driven (dynamic mode decomposition) techniques. Specifically, Latin hypercube sampling enables spatially sparse measurements, followed by dynamic mode decomposition to analyze resulting sparse spatial-temporal data, extracting frequency information and sparse dynamic modes. The Kriging method is then employed for full-state reconstruction. The proposed approach is evaluated using crossed dipole antennas. Results indicate that, even with a spatial subsampling factor of 130, achieving a fully reconstructed field distribution suitable for engineering applications with frequency information extraction is feasible. This hybrid framework …

Improving Insar Accuracy For Slow Deformation And Change Detection With Lidar And Gps, Yusupujiang Aimaiti, Vasit Sagan, Cagri Gul, Jeremy Maurer, Jackson D. Cothren, Carla Klehm, Elizabeth A. Koenig, Nathan Scott

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Interferometric Synthetic Aperture Radar (InSAR) uses two or more SAR images over the same region for mapping ground surface displacements through time. InSAR displacements are relative to a reference point due to the 2π phase ambiguity that from unwrapping, and as a result ground control points (GCPs) are often used to calibrate the displacement model and obtain absolute measurements. Errors in InSAR time-series are typically measured with respect to the reference point, but absolute errors are not currently well constrained. To develop absolute error models for InSAR, we generate Sentinel-1 InSAR time-series for Belleville, Illinois and compare time-series with Global …

Novel Re-Crosslinkable Preformed Particle Gels (Rppg) For Parent- And Infill-Well-Fracture Interactions Mitigation, Xiaojing Ge, Adel Alotibi, Ahmed Al-Hlaichi, Yanbo Liu, Tao Song, Junchen Liu, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Hydraulic fracturing treatments in unconventional infill (or "child") wells can be significantly affected by depletion from existing parent-well, resulting in asymmetrical fracture growth. These issues may lead to excessive load-water production, proppant deposition, casing deformation in the parent well, and unbalanced stimulation of infill wells. To mitigate these effects, various strategies have been proposed, including the use of far-field diverters in child wells and repressurization of parent wells. Additionally, an increasingly popular strategy involves injecting near-wellbore diverters to temporarily plug entry points into the parent wellbores during frac operations on infill wells. To achieve better application, a novel low-cost, self-degradable, …

Descriptive Statistical Analysis Of Experimental Data For Wettability Alteration With Smart Water Flooding In Carbonate Reservoirs, Muhammad Ali Buriro, Mingzhen Wei, Baojun Bai, Ya Yao

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Smart water flooding is a promising eco-friendly method for enhancing oil recovery in carbonate reservoirs. the optimal salinity and ionic composition of the injected water play a critical role in the success of this method. This study advances the field by employing machine learning and data analytics to streamline the determination of these critical parameters, which are traditionally reliant on time-intensive laboratory work. the primary objectives are to utilize data analytics to examine how smart water flooding influences wettability modification, identify key parameter ranges that notably alter the contact angle, and formulate guidelines and screening criteria for successful lab design. …

Lithospheric Drip And Mantle Thermal Upwelling Beneath Central Asia And The Southern Great Plains Of North America: Evidence From Receiver Function Imaging, Yangyang Liao

Doctoral Dissertations

"Investigating the depth of mantle transition zone (MTZ) discontinuities provides insights into mantle dynamics, including regional-scale downwelling of mantle lithosphere (i.e., lithospheric drip) and upwelling of thermal materials (i.e., mantle plume). In our study, we employ receiver functions to image the 410 km (d410) and 660 km (d660) mantle discontinuities and to ascertain thickness of the MTZ beneath Central Asia and the Great Plains in United States. The findings unveil a significantly thickened transition zone, exhibiting an average thickness of 284 km beneath East Sayan. When considered alongside geochemical observations, our results indicate that the descent of the lithosphere is …

High Viscosity Friction Reducer Evaluation At High Temperature And High Tds Environments, Ghith Ali Ahmed Biheri

Doctoral Dissertations

"In unconventional reservoirs, proppant transport during hydraulic fracturing treatments could be successful when the proppant is placed further within the reservoir's fracture networks. This could increase the reservoir formation conductivities and improve the productivity of the wells. This job of improving the reservoir conductivity by distributing and transporting proppant can be conducted by reliable fracture fluids with excellent fluid rheology (e.g., viscosity and elasticity). However, several challenges, including the high temperatures and the presence of high TDS in produced water, may limit the capability of fracture fluids to transport proppant. Additionally, the use of fracture fluid has raised fears regarding …

Oxygen Fugacity Of Global Ocean Island Basalts, Lori N. Willhite, Ricardo Arevalo, Philip Piccoli, John C. Lassiter, Devin Rand, Matthew G. Jackson, James M.D. Day, Robert W. Nicklas, Marek Locmelis, Thomas J. Ireland, Igor S. Puchtel

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Mantle plumes contain heterogenous chemical components and sample variable depths of the mantle, enabling glimpses into the compositional structure of Earth's interior. In this study, we evaluated ocean island basalts (OIB) from nine plume locations to provide a global and systematic assessment of the relationship between fO₂ and He-Sr-Nd-Pb-W-Os isotopic compositions. Ocean island basalts from the Pacific (Austral Islands, Hawaii, Mangaia, Samoa, Pitcairn), Atlantic (Azores, Canary Islands, St. Helena), and Indian Oceans (La Réunion) reveal that fO₂ in OIB is heterogeneous both within and among hotspots. Taken together with previous studies, global OIB have elevated and heterogenous fO …

Evaluation Of Novel Preformed Particle Gel System For Conformance Control In Mature Oil Reservoirs, Abdulaziz Almakimi, Ahmed Ben Ali, Ibnelwaleed A. Hussein, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

To address challenges associated with excessive water production in mature oil reservoirs, this study introduces a carboxymethyl cellulose (CMC)-based material as a novel preformed particle gel (PPG) designed to plug excessive water pathways and redistribute the subsequent injected water toward unswept zones. Through microwave-assisted grafting copolymerization of CMC with acrylamide (AM), we successfully generated multi-sized dry particles within the range of 250–800 µm. Comprehensive analyses, including Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), have confirmed the chemical composition and morphology of the resulting carboxymethyl cellulose-grafted crosslinked polyacrylamide (CMC/PAMBA). Swelling kinetics and rheology tests were conducted to confirm the …

Mantle Flow And Olivine Fabric Transition In The Myanmar Continental Subduction Zone, Enbo Fan, Yinshuang Ai, Stephen S. Gao, Yumei He, Kelly H. Liu, Mingming Jiang, Guangbing Hou, Shun Yang, Chit Thet Mon, Myo Thant, Kyaing Sein

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

One of the Major Advances in Mineral Physics and Seismology is the Realization that Different Olivine Fabric Types Are Functions of Temperature, Shear Stress, and Water Content in Oceanic Subducting Systems. the Distribution of Different Olivine Fabric Types and Geodynamic Processes in the Mantle Wedge above a Subducting Continental Slab Remain Poorly Understood. Here, based on Splitting Analysis of Shear Waves Recorded by 46 Stations Recently Deployed in Central Myanmar, We Reveal Trench-Perpendicular Fast Orientations between the 80 and 100 Km Slab Contours Sandwiched between Trench-Parallel Fast Orientations from the Mantle Wedge Tip to the Backarc. the Dramatic Change in …

Descriptive Statistical Analysis Of Experimental Data For Wettability Alteration With Smart Water Flooding In Carbonate Reservoirs, Muhammad Ali Buriro, Mingzhen Wei, Baojun Bai, Ya Yao

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Smart water flooding is a promising eco-friendly method for enhancing oil recovery in carbonate reservoirs. The optimal salinity and ionic composition of the injected water play a critical role in the success of this method. This study advances the field by employing machine learning and data analytics to streamline the determination of these critical parameters, which are traditionally reliant on time-intensive laboratory work. The primary objectives are to utilize data analytics to examine how smart water flooding influences wettability modification, identify key parameter ranges that notably alter the contact angle, and formulate guidelines and screening criteria for successful lab design. …