Petroleum Engineering Commons^™

Mud Loss Estimation Using Machine Learning Approach, Abo Taleb T. Al-Hameedi, Husam H. Alkinani, Shari Dunn-Norman, Ralph E. Flori, Steven Austin Hilgedick, Ahmed S. Amer, Mortadha Alsaba

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Lost circulation costs are a significant expense in drilling oil and gas wells. Drilling anywhere in the Rumaila field, one the world's largest oilfields, requires penetrating the Dammam formation, which is notorious for lost circulation issues and thus a great source of information on lost circulation events. This paper presents a new, more precise model to predict lost circulation volumes, equivalent circulation density (ECD), and rate of penetration (ROP) in the Dammam formation. A larger data set, more systematic statistical approach, and a machine-learning algorithm have produced statistical models that give a better prediction of the lost circulation volumes, ECD, …

Influence Of Frictional Or Rotational Kinetic Energy On Wellbore-Fluid/Temperature Profiles During Drilling Operations, Ahmed Q. Al Saedi, Ralph E. Flori, C. Shah Kabir

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Temperature-profile distributions in a wellbore during drilling operations might take different forms when applying the energy balance in the overall system. For steady-state conditions, wherein the wellbore is considered a closed system, adding any source of additional energy to this system can influence the predicted temperature profiles. This study presents a new analytical model to investigate the influence of rotational energy arising from the drillstring operation on the wellbore-temperature behavior.

A significant part of the drilling operation is rotation of the drillstring. Depending on the drilling rig, various equipment provides this kind of energy, such as the rotary table or …

The Effect Of Testing Conditions On The Performance Of Lost Circulation Materials: Understandable Sealing Mechanism, Montri Jeennakorn, Mortadha Alsaba, Runar Nygaard, Arild Saasen, Olav Magnar Nes

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Lost circulation materials (LCMs) are added to drilling fluids to mitigate lost circulation (LOC) problems. Designing the fluid requires a good understanding of sealing mechanisms and all the parameters affecting the sealing performance. Laboratory testing apparatus is the key concept for LCM evaluation ensuring successful treatment. The high-pressure test cell containing fracture discs is an effective tool among the broadly designed apparatus. A variety of formulations has been developed from the LCM physical properties. Recently, the testing conditions such as the slot wall angles, and the fracture disc thickness were found to have significant effects on the evaluation results. However, …

A Review Of Field Oil-Production Response Of Injection-Well Gel Treatments, Munqith Aldhaheri, Mingzhen Wei, Na Zhang, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

As life-span extenders, bulk gels have been widely applied to rejuvenate oil production from uneconomic producers in mature oil fields by improving the sweep efficiency of improved-oil-recovery (IOR)/enhanced-oil-recovery (EOR) floods. This paper presents a comprehensive review of the responses of injection-well gel treatments implemented between 1985 and 2014. The survey includes 61 field projects compiled from SPE papers and US Department of Energy reports. Seven parameters related to the oil-production response were evaluated according to the reservoir lithology, formation type, and recovery process, using univariate analysis and stacked histograms. The interquartile-range (IQR) method was used to detect the underperforming and …

Revisiting The Butler-Mokrys Model For The Vapor-Extraction Process, Vijitha Mohan, Partho Neogi, Baojun Bai

Chemical and Biochemical Engineering Faculty Research & Creative Works

The dynamics of a process in which a solvent in the form of a vapor or gas is introduced in a heavy-oil reservoir is considered. The process is called the solvent vapor-extraction process (VAPEX). When the vapor dissolves in the oil, it reduces its viscosity, allowing oil to flow under gravity and be collected at the bottom producer well. The conservation-of-species equation is analyzed to obtain a more-appropriate equation that differentiates between the velocity within the oil and the velocity at the interface, which can be solved to obtain a concentration profile of the solvent in oil. We diverge from …

Preformed Partial Gel Injection Chased By Low-Salinity Waterflooding In Fractured Carbonate Cores, Ali K. Alhuraishawy, Baojun Bai, Mingzhen Wei, Abdullah Almansour

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Fractures and oil-wet conditions significantly limit oil recovery in carbonate reservoirs. Gel treatment has been applied in injector wells to modify the prevailing reservoir streamlines and significantly reduce fracture permeability, whereas low-salinity waterflooding has been applied experimentally to modify rock wettability toward water-wet for improved oil recovery. However, both processes have limitations that cannot be resolved using a single method. The objective of this study was to test whether low-salinity water could enable gel particles to move deeply into fractures to efficiently increase oil recovery and control water production. A semitransparent fracture model of carbonate cores and acrylic plates was …

Experimental Study On Enhanced Oil Recovery (Eor) Mechanisms Of Nanogel Combining With Low Salinity Water For Carbonate Reservoirs, Pu Han

Doctoral Dissertations

"Nanomaterials have been widely studied and applied in the oil and gas industry. Among the developed nanomaterials, nano-sized crosslinked polymeric gel particle (nanogel) has shown great potential in recovering residual oil and improving oil recovery. This dissertation carried out their potential EOR mechanisms and the synergetic effect between nanogel and low salinity water. Nanogel used in this study was synthesized through the suspension polymerization process in our lab. The morphology, size distribution, and zeta potential were studied for nanogel dispersed in brine with variable ionic strength. The injectivity of nanogel was elucidated at first to ensure their in-depth penetration ability. …

A Critical Review Of Using High Viscosity Friction Reducers As Fracturing Fluids For Hydraulic Fracturing Applications, Mohammed Ba Geri, Abdulmohsin Imqam, Ralph E. Flori

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The primary purpose of using traditional friction reducers in stimulation treatments is to overcome the tubular drag while pumping at high flow rates. Hydraulic fracturing is the main technology used to produce hydrocarbon from extremely low permeability rock. Even though slickwater (water fracturing with few chemical additives) used to be one of the most common fracturing fluids, several concerns are still associated with its use, including usage of freshwater, high-cost operation, and environmental issues. Therefore, current practice in hydraulic fracturing is to use alternative fluid systems that are cost effective and have less environmental impact, such as fluids which utilize …

Investigate The Rheological Behavior Of High Viscosity Friction Reducer Fracture Fluid And Its Impact On Proppant Static Settling Velocity, Mohammed Ba Geri, Abdulmohsin Imqam, Andrey Bogdan, Lingjuan Shen

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The recent and rapid success of using high viscosity friction reducers (HVFRs) in hydraulic fracturing treatments is due to several advantages over other fracture fluids (e.g. linear gel), which include better proppant carrying capability, induce more complex fracture system network with higher fracture length, and overall lower costs due to fewer chemicals and less equipment on location. However, some concerns remain, like how HVFRs rheological properties can have impact on proppant transport into fractures. The objective of this study is to provide a comprehensive understanding of the influence the rheological characterization of HVFRs have on proppant static settling velocity within …

Investigating The Use Of Different Types Of Sealant Materials For Cement Remedial Applications, Murad Mohammedahmed Abdulfarraj

Doctoral Dissertations

"The overall objective is to investigate the ability of several material to mitigate cement failures such as channels, fractures, and micro-annuli in oil and gas wells. The sealant material that can also be used in the wells that are used for geologic storage of carbon dioxide CO₂. Evaluating the sealant material is critical to improve the zonal isolation of the wells, which would lead to safer operations. The approach of this dissertation is to utilize particles gel that has been used successfully in conformance control application, and epoxy resin systems, that have superior seal characteristics compared to conventional …

Asphaltene Stability In Crude Oil During Carbon Dioxide Injection And Its Impact On Oil Recovery: A Review, Data Analysis, And Experimental Study, Sherif M. Fakher

Masters Theses

"Crude oils are usually associated with many compounds, some of which are favorable and others, which are not. One of the most unfavorable components of crude oil that pose severe operational problems and decreases oil production significantly are asphaltenes. These compounds are solids that are homogenized in the crude oil at room temperature but tend to separate from solution when agitated. They can deposit in the reservoir pores, wellbore, and transportation pipelines thus causing severe operational problems and oil recovery reduction.

Even though researchers have been studying asphaltenes for more than 100 years, there is still an ambiguity concerning asphaltene …

Investigating The Use Of Class C Flyash-Based Geopolymer Cement As A Potential Alternative To Portland Cement To Seal Co₂ Storage Wells, Priyesh Parimal Jani

Masters Theses

"Capturing emitted carbon dioxide from the source of emission and storing it underground is one effective way to reduce the amount of CO₂ in the atmosphere and is called carbon capture and storage (CCS). For the successful CCS project, it is necessary to ensure long term storage of injected CO₂ inside these selected reservoirs. Portland cement used to cast wells in these reservoirs degrade in CO₂ environment and can create migration path for leakage of CO₂. The aim of this study was to provide a comprehensive review about the problem, to propose a new geopolymer …

Computational Fluid Dynamics Modeling Of Proppant Static Settling Velocity In High Viscosity Friction Reducers, Chen Yuan

Masters Theses

"In the current petroleum fracturing industry, it is necessary to understand the downhole migration and settling velocity of the proppant. If we can master this information well, it will be a great help to obtain effective propped fracture conductivity. In order to study the transport of proppants in the well, we used laboratory experiments and computer numerical simulations to compare the results to get a meaningful conclusion. We spent a lot of time building models on a powerful computer and comparing the experimental conclusions. We finally decided to use computational fluid dynamics (CFD) as the simulation platform, discrete phase method …

Modeling Overpressure Development During Shale Rock Compaction Coupling Poroelasticity And Permeability Evolution Above 3km Depth, Wenyu Zhao

Masters Theses

"The evolution of pore pressure including overpressure during sedimentation is an important process to consider when analyzing whether high pore pressure causes rock failure. High pore pressure is caused by under-compaction due to the rapid burial of low-permeability sediments, and as a result, porosity decreases less rapidly with depth than in normally compacted sediments where porosity decreases exponentially with depth. While under-compaction related pore pressure magnitudes have been determined empirically, in most numerical modeling approaches, the pore pressure is either applied as a static magnitude or coupled to a fluid flow simulator. This study simulates the pore pressure evolution during …

Gel Composition And Brine Concentration Effect On Hydrogel Dehydration Subjected To Uniaxial Compression, Xinrui Zhao

Masters Theses

"Gel treatment is a process that injects the gel into a reservoir to control the conformance and improve the sweep efficiency of injection fluids. At a certain pressure gradient, the gel dehydrates in a reservoir due to mechanical forces. This work evaluates the effects of the gel composition and brine concentration on gel dehydration under uniaxial compression. A sodium acrylate-co-acrylamide based gel cross-linked with N, N'-Methylenebisacrylamide (MBAA) was used for the study. The compression test is performed with a rheometer with a plate-plate geometry. The gel dehydration under pressure was measured to see how gel dehydration would be impacted by …

Breaker Evaluation And Formation Damage Remediation Of Re-Crosslinkable Preformed Particle Gel (Rppg), Enze Zhou

Masters Theses

"Re-crosslinkable preformed particle gel (RPPG) is a newly developed preformed particle gel for improving sweep efficiency and oil recovery by blocking or reducing the conductivity of fractures and fracture-like channels or conduits. However, RPPG has the potential to plug the facilities or damage the formation if a treatment is not properly conducted.

This work presents the performance of selected oxidizing breakers on the degradation of RPPG. The influence of a few factors on the degradation process was investigated, including breaker type, breaker concentration, temperature, gel concentration, gel aging time, and gel size. Results indicate that breaker type, concentration, and temperature …

Review And Data Analysis Of Low Salinity Water Effect Through Induced Fine Migration, Dawei Xu

Masters Theses

"Low salinity water flooding (LSWF) is well proved to be an effective EOR technology both in laboratory and field tests, however, the conditions for LSWF to work and EOR mechanism is still debatable. Up till now, many mechanisms have been proposed to explain the incremental oil recovery in sandstone by LSWF, for instance, fine migration, ionic exchange, wettability alteration and pH increase.

In this study, we only focus on low salinity water flooding effect through induced fine migration mechanism. The objective of this study is to conduct a comprehensive analysis using statistical analysis methods and explaining the mechanism of fine …

Transient Multiphase Flow Simulation For Unloading Of Frac Hit Gas Wells, Miguel Angel Cedeno Moreno

Doctoral Dissertations

"This work seeks to develop a fully step-by-step transient multiphase flow simulation valid for unloading gas wells using nitrogen. It studies the behavior of nitrogen for unloading horizontal gas wells with gas injection in the annulus. The work investigates unloading non-Newtonian fluids such as those which invade offset wells when a frac hit occurs during hydraulic fracturing operations in unconventional wells. The effect of varying tubing depth and injection pressure are included in the study.

Results show that as the plastic viscosity increases, the nitrogen volume and time to unload will be increased. As tubing depth increases, the nitrogen volume …

Plugging Performance Of Preformed Particle Gels In Fractures And Its Influencing Factors, Ze Wang

Doctoral Dissertations

"Preformed particle gels (PPG) has been successfully applied to combat the water channeling caused by fractures or fracture-like channels. Understanding the placement and plugging of PPG in fractures is crucial for gel treatment design. The objective of the dissertation is to explore the plugging performance of three PPG products in two types of fracture models, the partially and fully open fractures. The following studies has been conducted and conclusions have been drawn based on the results and analysis. First, the placement and plugging performance of conventional PPG was investigated using core flooding experiments conducted partially open fractures. The plugging efficiency …

Building Shared Knowledge For Eor Technologies: Screening Guideline Constructions, Dashboards, And Advanced Data Analysis, Na Zhang

Doctoral Dissertations

"Successful implementation of enhanced oil recovery (EOR) technology requires comprehensive knowledge and experiences based on existing EOR projects. EOR screening guidelines and EOR reservoir analog are served as such knowledge which are considered as the first step for a reservoir engineer to determine the next step techniques to improve the ultimate oil recovery from their assets. The objective of this research work is to provide better assistance for EOR selection by using fundamental statistics methods and machine learning techniques.

In this dissertation, a total of 977 worldwide EOR projects with the most uniformed, high-quality, and comprehensive information were collected from …

Novel Insights Into Low Salinity Water Flooding Enhanced Oil Recovery In Sandstone Reservoirs, Hasan N. Al-Saedi

Doctoral Dissertations

"Ever growing global energy demand and the natural decline in oil production from mature oil fields have been the main incentives to search for methods to increase recovery efficiency for several decades. Water flooding is extensively applied worldwide to improve oil recovery. The recent drop in oil prices has turned the oil industry to the cheapest improved oil recovery (IOR) techniques, such as low salinity (LS) waterflooding. Also, the reduction in reservoir energy and the friendly environmental aspects of low salinity water flooding (LSWF) provide additional incentives for its use. That LS water requires decreasing only the active divalent cations …

Investigating The Performance Of High Viscosity Friction Reducers Used For Proppant Transport During Hydraulic Fracturing, Mohammed Salem Ba Geri

Doctoral Dissertations

"Over the last few recent years, high viscosity friction reducers (HVFRs) have been successfully used in the oil and gas industry across all premier shale plays in North America including Permian, Bakken, and Eagle Ford. However, selecting the most suitable fracture fluid system plays an essential role in proppant transport and minimizing or eliminating formation damage.

This study investigates the influence of the use of produced water on the rheological behavior of HVFRs compared to a traditional linear guar gel. Experimental rheological characterization was studied to investigate the viscoelastic property of HVFRs on proppant transport. In addition, the successful implication …

Insights Into Well Performance And Completion Optimization Using A Coupled Fracfocus And Drillinginfo Database, Mustafa A. Al-Alwani

Doctoral Dissertations

“The hydraulic fracturing designs, drilling, and completion trends are undergoing continuous change as the oil and gas industry pushing the boundaries of the traditional designs to increase wells productivity and meet the energy demand. The lateral length in addition to the amount of proppant and water used in well stimulation have witnessed a paradigm shift over the past few years. The motivation for this work began with a desire to better understand well performance as a function of the type of fracturing fluid treatment applied. An early objective was to compare whether East Texas Cotton Valley wells stimulated with water …

Intelligent Data-Driven Decision-Making To Mitigate Or Stop Lost Circulation, Husam Hasan Alkinani

Doctoral Dissertations

”Lost circulation is a challenging problem in the oil and gas industry. Each year, millions of dollars are spent to mitigate or stop this problem. The aim of this work is to utilize machine learning and other intelligent solutions to help to make better decision to mitigate or stop lost circulation. A detailed literature review on the applications of decision tree analysis, expected monetary value, and artificial neural networks in the oil and gas industry was provided. Data for more than 3000 wells were gathered from many sources around the world. Detailed economics and probability analyses for lost circulation treatments’ …

Thermomechanical Analysis Of Rock Asperity In Fractures Of Enhanced Geothermal Systems, Chao Zeng

Doctoral Dissertations

"Enhanced Geothermal Systems (EGS) offer great potential for dramatically expanding the use of geothermal energy and become a promising supplement for fossil energy. The EGS is to extract heat by creating a subsurface system to which cold water can be added through injection wells. Injected water is heated by contact with rock and returns to the surface through production well. Fracture provides the primary conduit for fluid flow and heat transfer in natural rock. Fracture is propped by fracture roughness with varying heights which is called asperity. The stability of asperity determines fracture aperture and hence imposes substantial effect on …

Preformed-Particle-Gel Placement And Plugging Performance In Fractures With Tips, Ze Wang, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preformed-particle gels (PPGs) have been applied for reducing excessive water production caused by fractures in reservoirs. A portion of the fractures existing in reservoirs is composed of a void part and a fracture tip. The PPG placement behavior and plugging performance could be mainly affected by the fracture tips. A fracture with a tip, called a "partially open fracture" in this paper, was designed to investigate the placement and water-plugging performance of PPG. Cylindrical sandstone cores were used to manufacture partially open fractures. Pressure data of PPG injection, post-gel water breakthrough, and stable injection were analyzed to investigate the PPG …

Experimental Study On The Influence Of Slickwater On Shale Permeability, Zhonghua Liu, Baojun Bai, Zheyu Zhang, Jing Tang, Shunpeng Zeng, Xiaogang Li

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

There are two diametrically opposite views of the influence of slickwater on shale permeability among scholars at home and abroad. We used the shale outcrops rock samples from the Lower Silurian Longmaxi Formation in Sichuan Basin. The permeability of these dry samples before and after immersion in different solution systems were tested by pulse attenuation method. The experimental results show that the impregnation of different slickwater components and standard salt solution can promote the increase of the permeability of shale samples. The stress sensitivity of shale samples after liquid immersion is medium weak to weak. The sample stress sensitivity is …

Establishment And Application Of Fractal Capillary Tube Bundle Model Of Porous Media, Zhonghua Liu, Jianing Shen, Qianhua Xiao, Zhongpei Ding, Shunpeng Zeng, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In view of the problem of statistical regression constant in the model of capillary tube bundles in the porous media, a capillary bundle percolation model with fractal geometry was reconstructed. The function expressions of the fractal coefficient and Kozeny constant were deduced. The relationship between the macroscopic fractal properties of porous media and the fractal dimension and the micro pore parameters were obtained. Results show: Fractal coefficient is a function of fractal dimension, maximum pore radius and minimum pore radius; The macroscopic physical properties of porous media are a function of the fractal dimension and the radius of the capillary …

Numerical Simulation Study On Miscible Eor Techniques For Improving Oil Recovery In Shale Oil Reservoirs, Dheiaa Alfarge, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Shale formations in North America such as Bakken, Niobrara, and Eagle Ford have huge oil in place, 100—900 billion barrels of oil in Bakken only. However, the predicted primary recovery is still below 10%. Therefore, seeking for techniques to enhance oil recovery in these complex plays is inevitable. Although most of the previous studies in this area recommended that CO₂ would be the best EOR technique to improve oil recovery in these formations, pilot tests showed that natural gases performance clearly exceeds CO₂ performance in the field scale. In this paper, two different approaches have been integrated to …

Co2-Eor Mechanisms In Huff-N-Puff Operations In Shale Oil Reservoirs Based On History Matching Results, Dheiaa Alfarge, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Improved Oil Recovery (IOR) techniques in Unconventional Liquids Rich Reservoirs (ULR) are still a new concept because there is no commercial project for any IOR technique so far. Carbon dioxide (CO₂) based EOR technique has been effectively applied to improve oil recovery in the tight formations of conventional reservoirs. Extending this approach to unconventional formations has been extensively investigated over the last decade because CO₂ has unique properties which make it the first option of EOR methods to be tried. However, the applications and mechanisms for CO2-EOR in unconventional reservoirs would not necessarily be the same as …