Open Access. Powered by Scholars. Published by Universities.®

Petroleum Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Missouri University of Science and Technology

Discipline
Keyword
Publication Year
Publication
Publication Type

Articles 151 - 180 of 612

Full-Text Articles in Petroleum Engineering

Wettability Alteration Process At Pore-Scale During Engineered Waterflooding Using Computational Fluid Dynamics, Yongqiang Chen, Ping Chang, Guang Xu, Quan Xie Feb 2022

Wettability Alteration Process At Pore-Scale During Engineered Waterflooding Using Computational Fluid Dynamics, Yongqiang Chen, Ping Chang, Guang Xu, Quan Xie

Mining Engineering Faculty Research & Creative Works

Engineered waterflooding modifies chemistry of injected brine to efficiently and environmentally friendly enhance oil recovery. The common practice of engineered waterflooding includes low salinity waterflooding (LSW) and carbonated waterflooding. Among these oil recovery methods, wettability alteration has been perceived as a critical physicochemical process for additional oil recovery. While extensive work has been conducted to characterize the wettability alteration, the existing theory cannot explain the conflict oil recovery between secondary mode (injecting engineered water at the very beginning of flooding) and tertiary mode (injecting engineered water after conventional waterflooding), where secondary engineered waterflooding always gives a greater incremental oil recovery …


Descriptive Statistical Analysis Of Experimental Data For Wettability Alteration With Surfactants In Carbonate Reservoirs, Ya Yao, Mingzhen Wei, Baojun Bai Feb 2022

Descriptive Statistical Analysis Of Experimental Data For Wettability Alteration With Surfactants In Carbonate Reservoirs, Ya Yao, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Surfactants have been the widely used agents to alter the wettability of carbonate rocks to more water-wet and enhanced oil recovery (EOR). As one of major EOR methods, an effective surfactant huff-puff application design requires comprehensive guidelines about where, how, and when this method could be applied. In order to construct such guidelines, a dataset including 338 effective surfactant imbibition tests is established by collecting information from nearly 50 publications. Based on this dataset, descriptive statistical analysis methods are used to conduct data analysis, including three main parts. The first part establishes the application guidelines for surfactant huff-puff treatments which …


Laboratory Evaluation Of Placement Behavior Of Microgels For Conformance Control In Reservoirs Containing Superpermeable Channels, Yang Zhao, Baojun Bai Feb 2022

Laboratory Evaluation Of Placement Behavior Of Microgels For Conformance Control In Reservoirs Containing Superpermeable Channels, Yang Zhao, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gel treatment has been proven an effective method to attack excessive water production in many mature oilfields. However, not all of the application projects have successful stories. The effectiveness of a gel treatment largely depends on the transport and placement behavior of gel materials in reservoirs to be treated. In this work, we carried out systematic studies to investigate the transport, placement, water-blocking ability, fluid diversion and sweep improvement, and matrix damage effect of micrometer-sized preformed particle gels (microgels) in reservoirs containing superpermeable (super-K) channels. The impact of the channel/matrix permeability contrast and the particle/pore size ratio in the channels …


Asphaltene Thermodynamic Precipitation During Miscible Nitrogen Gas Injection, Mukhtar Elturki, Abdulmohsin Imqam Feb 2022

Asphaltene Thermodynamic Precipitation During Miscible Nitrogen Gas Injection, Mukhtar Elturki, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

For many years, miscible gas injection has been the most beneficial enhanced oil recovery method in the oil and gas industry. However, injecting a miscible gas to displace oil often causes the flocculation and deposition of asphaltenes, which subsequently leads to a number of production problems. Nitrogen gas (N2) injection has been used to enhance oil recovery in some oil fields, seeking to improve oil recovery. However, few works have implemented N2 injection and investigated its effect on asphaltene precipitation and deposition. This research investigated the N2 miscible flow mechanism in nanopores and its impact on asphaltene precipitations, which can …


Numerical Simulation Study Of Gel Treatment For Conformance Control From Lab To Field, Jianqiao Leng Jan 2022

Numerical Simulation Study Of Gel Treatment For Conformance Control From Lab To Field, Jianqiao Leng

Doctoral Dissertations

“Gel treatment has been widely applied to control reservoir conformance and thus improve the sweep efficiency of injection fluids. Quite a few numerical simulations have been conducted to investigate the factors impacting gel treatment and assist to optimize treatment design and predict the performance. However, there exists significant barrier between the simulation approaches and lab experiments. In this study, two comprehensive reviews have been conducted to identify the gaps between lab and current simulations for in-situ polymer treatment and preformed particle gel treatment, separately.

Based on the identified gaps, the effect of a few major factors which are very important …


The Kanarra Fold-Thrust System -- The Leading Edge Of The Sevier Fold-Thrust Belt, Southwest Utah, William Joseph Michael Chandonia Jan 2022

The Kanarra Fold-Thrust System -- The Leading Edge Of The Sevier Fold-Thrust Belt, Southwest Utah, William Joseph Michael Chandonia

Doctoral Dissertations

“The Jurassic to Eocene Sevier fold-thrust belt is the subject of continued scientific curiosity in tectonics, stratigraphy, and industry. Understanding its development in southwest Utah is hindered in part due to the multiple origins proposed for the Kanarra anticline, a major leading edge structure -- a drag fold along the Hurricane fault, Laramide monocline, Sevier fault propagation fold, or a combination of these -- which have confused its tectonic significance and regional context. This confusion results from the structural complexity of its exposed eastern limb, as well as displacement and burial of its crest and western limb beneath Neogene sediments …


Evaluation Of Recrosslinkable Preformed Particle Gel (Rppg) As A Fluid Loss Control Material During Drilling Operations, Mohamed Saad M. Ahdaya Jan 2022

Evaluation Of Recrosslinkable Preformed Particle Gel (Rppg) As A Fluid Loss Control Material During Drilling Operations, Mohamed Saad M. Ahdaya

Doctoral Dissertations

"One of the most intense, expensive, and time-consuming problems during drilling operations is the loss of circulation, which could result in several consequences, including wellbore collapse, fluid inflow, formation damage, environmental issues, and nonproductive time. This research aims to evaluate novel materials that can mitigate lost circulation and overcome the limitation of other materials. In this research, a comprehensive evaluation of a re-crosslinkable preformed particle gel (RPPG) has been conducted to determine the extent to which it can be used to control drilling fluid losses during drilling operations. The RPPG consists of swellable gel particles that can self-crosslink to form …


Comprehensive Evaluation Of Novel Medium-Temperature And High-Temperature Resistant Re-Crosslinkable Preformed Particle Gels For Conformance Control, Zhanmiao Zhai Jan 2022

Comprehensive Evaluation Of Novel Medium-Temperature And High-Temperature Resistant Re-Crosslinkable Preformed Particle Gels For Conformance Control, Zhanmiao Zhai

Masters Theses

"Gel treatment has been widely used to control excessive water production and improve oil recovery in mature oilfields. In comparison to traditional preformed particle gel (PPG), re-cross linkable preformed particle gel (RPPG) has a significant advantage in treating abnormal features such as open fractures, fracture-like channels, and void space conduits (VSC). This research provides a comprehensive evaluation of two novel RPPG products developed in our lab: medium-temperature resistant RPPG (MT-RPPG) for a Middle East reservoir and a high-temperature resistant RPPG (HT-RPPG) for North Sea reservoirs (130 oC).

We assessed the effect of the monomer types and concentration, pH, salinity, …


Re-Crosslinking Particle Gel For Co2 Compliance Control And Co2 Filtration Blocking, Yifu Long, Baojun Bai, Thomas P. Schuman Jan 2022

Re-Crosslinking Particle Gel For Co2 Compliance Control And Co2 Filtration Blocking, Yifu Long, Baojun Bai, Thomas P. Schuman

Patents

The present invention generally relates to the composition of particle gels for CO2 - EOR and CO2 storage . More particularly , CO2 resistant particle gels are provided that can re - crosslink at subterranean conditions . These particle gels can be deployed to improve the conformance of CO , flooding , CO , huff - puff , or Water - Alternative - Gas ( WAG ) . The applications may also involve CO2 storage , such as the blocking of CO2 leakage and similar CO2 processing .


Fiber Assisted Re-Cross-Linkable Polymer Gel And Preformed Particle Gels For Fluid Loss And Conformance Control, Baojun Bai, Ze Wang, Zhe Sun, Jingyang Pu, Thomas P. Schuman Jan 2022

Fiber Assisted Re-Cross-Linkable Polymer Gel And Preformed Particle Gels For Fluid Loss And Conformance Control, Baojun Bai, Ze Wang, Zhe Sun, Jingyang Pu, Thomas P. Schuman

Patents

Described herein are compositions useful for controlling fluid flow, for example in a target zone of a subterranean environment, and methods of forming and using the same. The composition generally comprises a quantity of fibers and a quantity of swellable particles, which may be dispersed in a carrier fluid. The composition may be synthesized in the form of a bulk gel or may be gelatinated during use. The fibers in the compositions provide improved performance as compared to prior PPG and RPPG particle containing compositions. Specifically, the compositions reinforce the re-cross-linked/re-associated hydrogel plug in underground features and support proper rehydration …


Evaluation Of Novel Preformed Particle Gels For Conformance Control And Acid Stimulation Through Core Flooding Tests, Shuda Zhao Jan 2022

Evaluation Of Novel Preformed Particle Gels For Conformance Control And Acid Stimulation Through Core Flooding Tests, Shuda Zhao

Doctoral Dissertations

"Acid stimulation and conformance control are two major methods to improve oil production. This study systematically evaluates two newly developed gels: Degradable Preformed Particle Gel (DPPG) and Re-crosslinkable Preformed Polymer Gel (RPPG). DPPG is designed to be a temporary plugging agent for acid stimulation and can self-degrade into a water-like fluid. RPPG is designed for reservoir sweep efficiency improvement and can re-crosslink to each other and form an immobile bulk gel after being placed in fractures or fracture-like conduits.

For DPPG, this study evaluates the effect of monomer, crosslinker, and initiator concentration on the swelling and degradation performance. Results show …


Systematic Evaluation Of A Novel Self-Healing Poly(Acrylamide-Co-Vinyl Acetate)/Alginate Polymer Gel For Fluid Flow Control In High Temperature And High Salinity Reservoirs, Jingyang Pu, Baojun Bai, Thomas P. Schuman Oct 2021

Systematic Evaluation Of A Novel Self-Healing Poly(Acrylamide-Co-Vinyl Acetate)/Alginate Polymer Gel For Fluid Flow Control In High Temperature And High Salinity Reservoirs, Jingyang Pu, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preferential fluid flow often occurs when water and CO2 is injected into mature oilfields, sig-nificantly reducing their injection efficiency. Particle gels have been evaluated and applied to control the short circulation problems. This study systematically investigated a novel poly(acrylamide-co-vinyl acetate)/alginate-based interpenetrated gel system (Alg-IPNG) which is designed to control the preferential fluid flow problems in high-temperature reservoirs. Chromium acetate was incorporated into the gel system to provide the delayed crosslinking feature of the particle gels. The alginate polymer system can also take advantage of the Ca2+ ions in the formation water, which exist in most reservoirs, to reinforce …


Experimental Data On Water Soluble Polymers Thermal And Hydrolytic Stability, Reactivity Ratios Of Monomers And Frr Calculation For Thermally Stable Preformed Particle Gels Therefrom, Buddhabhushan Salunkhe, Thomas P. Schuman, Ali Al Brahim, Baojun Bai Oct 2021

Experimental Data On Water Soluble Polymers Thermal And Hydrolytic Stability, Reactivity Ratios Of Monomers And Frr Calculation For Thermally Stable Preformed Particle Gels Therefrom, Buddhabhushan Salunkhe, Thomas P. Schuman, Ali Al Brahim, Baojun Bai

Chemistry Faculty Research & Creative Works

Experimental data on water soluble polymer thermal and hydrolytic stability in acidic, neutral and basic pH conditions in aqueous solution is presented. Thermal and hydrolytic stability of polymer aqueous solutions were monitored in variable pH medium by aging at 130 °C temperature for different aging time. Polymer viscosity measurements were performed periodically for 3 months. Furthermore, this data can serve as a basis of monomer selection for thermally stable hydrogels for applications like oil recovery, hydrogel coatings for steam sterilized medical devices and other applications. Reactivity ratios were determined for monomers associated to the most stable polymers using 1H …


Understanding The Plugging Performance Of Hpam-Cr (Iii) Polymer Gel For Co2 Conformance Control, Xindi Sun, Baojun Bai, Ali Khayoon Alhuraishawy, Daoyi Zhu Oct 2021

Understanding The Plugging Performance Of Hpam-Cr (Iii) Polymer Gel For Co2 Conformance Control, Xindi Sun, Baojun Bai, Ali Khayoon Alhuraishawy, Daoyi Zhu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

With the demand for conformance control in carbon dioxide (CO2) flooding fields, hydrolyzed polyacrylamide-chromium [HPAM-Cr (III)] polymer gel has been applied in fields for CO2 conformance control. However, the field application results are mixed with success and failure. This paper is intended to understand the HPAM-Cr (III) polymer gel plugging performance in CO2 flooding reservoirs through laboratory experiments and numerical analysis. We conducted core flooding tests to understand how the cycles of CO2 and water affect the HPAM-Cr (III) polymer gel plugging efficiency to CO2 and water during a water-alternating-gas (WAG) process. Berea Sandstone …


Asphaltene Thermodynamic Flocculation During Immiscible Nitrogen Gas Injection, Mukhtar Elturki, Abdulmohsin Imqam Oct 2021

Asphaltene Thermodynamic Flocculation During Immiscible Nitrogen Gas Injection, Mukhtar Elturki, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gas-enhanced oil recovery is one of the most advantageous enhanced oil recovery methods. Nitrogen is one of the most investigated gases because of its beneficial properties. However, during its interaction with crude oil, nitrogen can induce asphaltene deposition, which may result in severe formation damage and pore plugging. Few works have investigated the impact of nitrogen on asphaltene instability. This research studied the immiscibility conditions for nitrogen in nanopores and the impact of nitrogen on asphaltene precipitations, which could lead to plugging pores and oil recovery reduction. A slimtube was used to determine the minimum miscibility pressure (MMP) of nitrogen …


A Comprehensive Review Of In-Situ Polymer Gel Simulation For Conformance Control, Baojun Bai, Jianqiao Leng, Mingzhen Wei Sep 2021

A Comprehensive Review Of In-Situ Polymer Gel Simulation For Conformance Control, Baojun Bai, Jianqiao Leng, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gel treatment has been widely applied in mature oilfields to improve sweep efficiency and control water production. Correct numerical simulation is of major importance to the optimization design and prediction of a successful gel treatment. However, there exist many problems in current simulation studies in published literature. This paper first presents a comprehensive review on the major factors that have been considered at different gelation stages during gel treatment, the models used in the commercial/in-house simulators, and current numerical simulation studies on both laboratory and field scales. Then we classify the current in-situ gel numerical simulation problems as 1, deficient …


Impact Of Clay Stabilizer On The Methane Desorption Kinetics And Isotherms Of Longmaxi Shale, China, Zhong Hua Liu, Jia Chun Wang, Baojun Bai, Yan Ling Wang Sep 2021

Impact Of Clay Stabilizer On The Methane Desorption Kinetics And Isotherms Of Longmaxi Shale, China, Zhong Hua Liu, Jia Chun Wang, Baojun Bai, Yan Ling Wang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Knowing methane desorption characteristics is essential to define the contribution of adsorbed gas to gas well production. To evaluate the synthetic effect of a clay stabilizer solution on methane desorption kinetics and isotherms pertaining to Longmaxi shale, an experimental setup was designed based on the volumetric method. The objective was to conduct experiments on methane adsorption and desorption kinetics and isotherms before and after clay stabilizer treatments. The experimental data were a good fit for both the intraparticle diffusion model and the Freundlich isotherm model. We analyzed the effect of the clay stabilizer on desorption kinetics and isotherms. Results show …


Sealant Injectivity Through Void Space Conduits To Assess Remediation Of Well Cement Failure, Mohammed Alkhamis, Abdulmohsin Imqam Jun 2021

Sealant Injectivity Through Void Space Conduits To Assess Remediation Of Well Cement Failure, Mohammed Alkhamis, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The primary cement of oil and gas wells is prone to fail under downhole conditions. Thus, a remedial operation must be conducted to restore the wellbore integrity and provides zonal isolation. Many types of materials are currently used and/or have the potential to be employed in wellbore integrity applications, including, but not limited to, conventional Portland cement, microfine and ultrafine cement, thermoset materials, and thermoplastic materials. In this study, several types of materials were selected for evaluation: (1) conventional Portland cement, which is the most widely used in remedial operations in the petroleum industry, (2) polymer resin, which is one …


Dynamics In Drops As Confined Systems Containing Nanoparticles: Reformation Of Nanoparticles And Evaporation Of Water, Vijitha Mohan, Xianjie Qiu, Partho Neogi May 2021

Dynamics In Drops As Confined Systems Containing Nanoparticles: Reformation Of Nanoparticles And Evaporation Of Water, Vijitha Mohan, Xianjie Qiu, Partho Neogi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Brine is used to displace crude oil in a reservoir and its performance improves when brine contains nanoparticles. It is the presence of nanoparticles in confinements, such as at dynamic contact lines and in thin films, which is of importance. The investigators here have determined a fast way to obtain confined systems by evaporating a small drop of water containing nanoparticles. Water droplets containing nanoparticles of alumina or silica were evaporated on surfaces of polyethylene terephthalate sheets, which are partially wet by water, and glass which is fully wet. After the liquid in the drops evaporated, the residues were examined …


Settling Of Spherical Particles In High Viscosity Friction Reducer Fracture Fluids, Ghith Biheri, Abdulmohsin Imqam May 2021

Settling Of Spherical Particles In High Viscosity Friction Reducer Fracture Fluids, Ghith Biheri, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Investigating the key factors that impact fluid rheology and proppant static settling velocity in high viscosity friction reducers (HVFRs) is a critical aspect for successful proppant transport in hydraulic fracture treatment. In this study, the rheological properties of HVFRs were tested at various temperature ranges (i.e., 25, 50, 75, and 100◦C) and different HVFR concentrations (i.e., 1, 2, 4, and 8 gpt). Three sizes of spherical particle diameters (i.e., 2, 4, and 6 mm) were selected to measure the static settling velocity. The fracture fluid was tested in two fracture models: an unconfined glass model and a confined rectangular model …


Heavy Oil And Vapex Process: A Brief Review, Vijitha Mohan, Parthasakha Neogi, Baojun Bai May 2021

Heavy Oil And Vapex Process: A Brief Review, Vijitha Mohan, Parthasakha Neogi, Baojun Bai

Chemical and Biochemical Engineering Faculty Research & Creative Works

Heavy oil recovery requires either heat or solvent assistance to reduce its high viscosity first and then the less viscous oil can be recovered. Processes that use vapor assisted petroleum extraction (VAPEX) utilize vaporized solvent. Solvent vapors are introduced through a top injection well to induce viscosity reduction and the less viscous oil is collected at the bottom production well. It is noteworthy, that the solvent itself when recovered, can be seen as an integral part of oil. Exact molecular weight and chemistry of heavy oil is uncertain making analysis of thermodynamic properties difficult, however this is overcome by making …


Characterization And Oil Recovery Enhancement By A Polymeric Nanogel Combined With Surfactant For Sandstone Reservoirs, Mustafa Mohammed Almahfood, Baojun Bai Feb 2021

Characterization And Oil Recovery Enhancement By A Polymeric Nanogel Combined With Surfactant For Sandstone Reservoirs, Mustafa Mohammed Almahfood, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The characterization and enhanced oil recovery mechanisms of a nanosized polymeric cross-linked gel are presented herein. A negatively charged nanogel was synthesized using a typical free radical suspension polymerization process by employing 2-acrylamido 2-methyl propane sulfonic acid monomer. The synthesized nanogel showed a narrow size distribution with one peak pointing to a predominant homogeneous droplet size. The charged nanogels were also able to adsorb at the oil-water interfaces to reduce interfacial tension and stabilize oil-in-water emulsions, which ultimately improved the recovered oil from hydrocarbon reservoirs. In addition, a fixed concentration of negatively charged surfactant (sodium dodecyl sulfate or SDS) was …


What Are The Dominant Flow Regimes During Carbon Dioxide Propagation In Shale Reservoirs’ Matrix, Natural Fractures And Hydraulic Fractures?, Sherif Fakher, Youssef Elgahawy, Hesham Abdelaal, Abdulmohsin Imqam Jan 2021

What Are The Dominant Flow Regimes During Carbon Dioxide Propagation In Shale Reservoirs’ Matrix, Natural Fractures And Hydraulic Fractures?, Sherif Fakher, Youssef Elgahawy, Hesham Abdelaal, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Carbon dioxide (CO2) injection in low permeability shale reservoirs has recently gained much attention due to the claims that it has a large recovery factor and can also be used in CO2 storage operations. This research investigates the different flow regimes that the CO2 will exhibit during its propagation through the fractures, micropores, and the nanopores in unconventional shale reservoirs to accurately evaluate the mechanism by which CO2 recovers oil from these reservoirs. One of the most widely used tools to distinguish between different flow regimes is the Knudsen Number. Initially, a mathematical analysis of …


Investigation Of Post-Acid Stimulation Impacts On Well Performance Using Fracture Modeling And Reservoir Simulation In A Jurassic Carbonate Reservoir, Muaath Alansari Jan 2021

Investigation Of Post-Acid Stimulation Impacts On Well Performance Using Fracture Modeling And Reservoir Simulation In A Jurassic Carbonate Reservoir, Muaath Alansari

Masters Theses

"Well stimulation (well fracturing) became an essential tool in the Oil and Gas industry to unlock the potential of unconventional reservoirs all over the world and especially in the Middle East. In Kuwait, well stimulation is obligatory when dealing with deep Jurassic carbonate reservoirs. Thus, the well fracture designing process plays a very critical role in determining the success of the stimulation job and the improvement of the recovery.

Several wells stimulated with 20% HCL have shown wide variations in both short and long term well production performance. The research aims to investigate and identify the possible reasons causing these …


Relationships Among Mineralogy, Geochemistry, And Oil And Gas Production In The Tuscaloosa Marine Shale, Hayley Roxana Beitel Jan 2021

Relationships Among Mineralogy, Geochemistry, And Oil And Gas Production In The Tuscaloosa Marine Shale, Hayley Roxana Beitel

Masters Theses

"The Tuscaloosa Marine Shale (TMS) is an unconventional shale reservoir located in southeast Louisiana and southwest Mississippi. Limited mineralogical and geochemical data for the TMS have been published. The data that do exist indicate that the formation is heterogeneous. Consequently, previous investigators and oil and gas companies have not managed to effectively link mineralogical and chemical changes to oil and gas production in the TMS. These linkages are critical to establish for future exploration efforts. In this study, we attempt to establish these relationships by gathering all existing mineralogical and chemical data in the TMS, including newly acquired data from …


Analysis Of Refracturing Activities In The Major Shale Plays In The United States, Faisal Shammam Jan 2021

Analysis Of Refracturing Activities In The Major Shale Plays In The United States, Faisal Shammam

Masters Theses

"Refracturing of existing horizontal multistage wells has increased over the past decade in the oil industry. This work aims to investigate all the refracturing operations in the most active shale plays in the united states (Bakken, Niobrara, Marcellus, Permian, Eagle Ford, Barnett, and Haynesville) in terms of completion technique, candidate selection, treatment types, and refracturing production efficiency. To collect the data of the refractured wells, an advanced data analytics approach was applied to separate the refractured wells from 170,000 wells reported in FracFocus, a public chemical registry for hydraulic fracturing in the United States, and combine it with DrillingInfo database, …


An Experimental Study Investigating The Impact Of Miscible And Immiscible Nitrogen Injection On Asphaltene Instability In Nano Shale Pore Structure, Mukhtar Elturki, Abdulmohsin Imqam Jan 2021

An Experimental Study Investigating The Impact Of Miscible And Immiscible Nitrogen Injection On Asphaltene Instability In Nano Shale Pore Structure, Mukhtar Elturki, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Miscible gas injection has become the most used enhanced oil recovery (EOR) method in the oil and gas industry. The deposition and precipitation of asphaltene during the gas injection process is one of the problems during the oil production process. The asphaltene can deposit and plug the pores, which reduces the permeability in a reservoir; thus, decreasing the oil recovery and increasing the production costs. This research investigates the nitrogen (N2) miscible and immiscible pressure injections on asphaltene instability in shale pore structures. First, a slim tube was used to determine the minimum miscibility pressure (MMP) of N2 to ensure …


Prediction Of Equivalent Liquid Permeability From Gas Permeability Measurements: A Recurrent Neural Network Approach, Husam Alkinani, Abo Taleb Al-Hameedi, Shari Dunn-Norman Jan 2021

Prediction Of Equivalent Liquid Permeability From Gas Permeability Measurements: A Recurrent Neural Network Approach, Husam Alkinani, Abo Taleb Al-Hameedi, Shari Dunn-Norman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

One of the most vital reservoir properties is permeability. It is usually measured using core samples with two major measurement methods: using gas or using liquid. The purpose of this work is to use a data-driven recurrent neural network model to estimate the equivalent liquid permeability based on gas permeability. By using this model, the equivalent liquid permeability can be predicted for the permeability of core samples with rich clay minerals measured using gas (or any core sample that is measured using gas). This will give an alternative way to the currently used method (Klinkenberg method). Core sample data measurements …


Will Carbon Dioxide Injection In Shale Reservoirs Produce From The Shale Matrix, Natural Fractures, Or Hydraulic Fractures?, Sherif Fakher, Youssef Elgahawy, Hesham Abdelaal, Abdulmohsin Imqam Jan 2021

Will Carbon Dioxide Injection In Shale Reservoirs Produce From The Shale Matrix, Natural Fractures, Or Hydraulic Fractures?, Sherif Fakher, Youssef Elgahawy, Hesham Abdelaal, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Enhanced oil recovery (EOR) in shale reservoirs has been recently shown to increase oil recovery significantly from this unconventional oil and gas source. One of the most studied EOR methods in shale reservoirs is gas injection, with a focus on carbon Dioxide (CO2) mainly due to the ability to both enhance oil recovery and store the CO2 in the formation. Even though several shale plays have reported an increase in oil recovery using CO2 injection, in some cases this method failed severely. This research attempts to investigate the ability of the CO2 to mobilize crude …


Power Generation From Waste Heat During Oil Production, Subrahmanya Chandra Bhamidipati Jan 2021

Power Generation From Waste Heat During Oil Production, Subrahmanya Chandra Bhamidipati

Masters Theses

"The increase in the world population is causing a significant increase in the global demand for energy. This rise in demand is generally met with the use of fossil fuels. But there is considerable pressure to lessen the release of carbon through the combustion of fossil fuels. One way that the oil and gas industry can provide increased energy without carbon combustion is by extracting the latent heat energy contained in produced oil, gas and water from producing reservoirs, and from water which is cycled through depleted, end-of-life or abandoned reservoirs. Extracting this energy and using it to provide direct …