Petroleum Engineering Commons^™

A Large Scale Network Model To Obtain Interwell Formation Characteristics, Seyedmohammadamin Gherabati

LSU Doctoral Dissertations

Limited data availability and poor data quality make it difficult to characterize many reservoirs. For reservoirs that have undergone waterflooding, production and injection data are a reliable source of information from which injector-to-producer connections can be inferred. In this research, we use well locations, injection and production rate data and well fractional flow values to develop a reservoir-scale network model. A Voronoi mesh divides the reservoir into a number of node volumes each of which contains a well. Bonds connect each of the nodes with conductance values that must be inferred from the rate data. An inverse problem is formulated …

Experimental And Modeling Study Of Foam Flow In Pipes With Two Foam-Flow Regimes, Ali Reza Edrisi

LSU Doctoral Dissertations

The use of foams can be found abundantly in many applications in a wide range of industries, including oil and gas industry. Although understanding foam flow behavior is crucial for the optimization of such applications, the complex flow behavior of foams has been a major challenge. Recent experimental studies with surfactant foams presented a new way to characterize foam flow characteristics by using two flow regimes: the low-quality regime showing either plug-flow or segregated-flow pattern, and the high-quality regime showing slug-flow pattern. This study consists of three main components: (1) experimental investigation of foam rheology in pipes; (2) building up …

Aggregation Of Uncontrolled Fluids During Catastrophic System Failures In Offshore Environments, James Thomas Stiernberg

LSU Master's Theses

Safety culture relating to offshore operations has shifted since the Deepwater Horizon blowout and resulting oil spill. This incident has prompted the research of high volume spills during all stages of hydrocarbon exploration and production. This study particularly covers the interactions of wells and offshore networks as they pertain to situations where a release of reservoir fluids to the environment is occurring. Primary concerns of this investigation are stream confluences, leak modeling, and fluid behavior; the first two will be handled with various numerical software packages (OLGA®, CFD, and nodal analyses) while the later will require more rigorous treatment and …

Dynamic Modeling Of Channel Formation During Fluid Injection Into Unconsolidated Sands, Sayamik Ameen

LSU Master's Theses

Water injection is widely used for sweeping hydrocarbons in waterflooding operations, and also for maintaining reservoir pressure or disposing waste water. Injection at a high rate is required to maintain the economy of waterflooding projects; however, loss of injectivity is a quite common problem in unconsolidated sand formations like deep water Gulf of Mexico. Well intervention operations, hurricanes, and other issues require frequent shut-downs during the life of offshore wells; in order to minimize deteriorating effect of these shutdowns on wellbore injectivity more accurate modeling of the injection process is needed. Injection of water into a saturated, granular, porous medium …

Discrete Phase Simulations Of Drilled Cuttings Transport Process In Highly Deviated Wells, Doguhan Yilmaz

LSU Master's Theses

Transporting drilled cuttings from the bottomhole to the surface becomes more difficult and problematic in highly deviated wells than in vertical wells. Cuttings tend to settle down on the low side of the annulus typically in the form of a bed which can cause further problems. The height of this bed depends on many parameters such as annular domain geometry, drilling fluid density and rheology, annular flow rate, drill pipe rotation speed, cuttings size, shape, and their density. Prediction of the stationary cuttings bed height with respect to these aforementioned parameters is thus necessary to optimize the range of the …

The Diagnosis Of Well Control Complications During Managed Pressure Drilling, Brian Piccolo

LSU Master's Theses

The constant bottom-hole pressure method of managed pressure drilling is generally expected to reduce well control risks and apply well understood concepts when a kick is taken. Nevertheless, complications, such as operator error, leaks, plugging, equipment failures, and exceeding kick tolerance, can occur during kick circulation. By not properly interpreting the symptoms of a complication, a driller risks the consequences of additional influx, lost circulation or the simultaneous occurrence of both. To address the challenge of diagnosing complications, the implied pit gain (IPG) method is being evaluated as an enhancement to established industry practices. Traditional diagnostic methods attempt to match …

Thermal, Compositional, And Salinity Effects On Wettability And Oil Recovery In A Dolomite Reservoir, Azadeh Kafili Kasmaei

LSU Master's Theses

Low salinity and composition effects in improving oil recovery in sandstone reservoirs are known. However, these effects have not been thoroughly studied for the carbonate reservoirs. Because of the lack of the clay minerals in the carbonate rocks, the mechanisms for the improved oil recovery with low salinity, brine composition, and temperature may not be the same as those for sandstones. This experimental study attempts to investigate the effects of low salinity, brine composition, and temperature on wettability and oil recovery in a dolomite reservoir. Also, it is attempted to confirm that wettability alteration is the main mechanism for improvement …

Evaluation Of Gas-Assisted Gravity Drainage Eor Process Applicability In A Louisiana Oil Field Through Experiments And Reservoir Simulation, Wagirin Ruiz Paidin

LSU Doctoral Dissertations

The Gas-Assisted Gravity Drainage (GAGD) process was developed as an alternative to conventional gas injection enhanced oil recovery (EOR) processes, which suffer from their inherent weakness of combating gravity segregation. The GAGD process, however, is aimed at taking advantage of this phenomenon and consists of using horizontal producers near the bottom of the payzone while injecting gas using vertical injection wells. It is hypothesized that the injected gas will rise to the top, thereby forming a gas cap while displacing reservoir brine/oil downward towards the producers. In this study, a single-well alternative to the multi-well GAGD process was investigated to …

Modeling Foam Delivery Mechanisms In Deep Vadose-Zone Remediation Using Method Of Characteristics (Moc), Alireza Roostapour

LSU Doctoral Dissertations

This study investigates foam delivery mechanisms in vadose-zone remediation by using Method of Characteristics (MoC). In such applications, dry foams are introduced into a porous medium which is initially at low saturation of water (Sw) containing pollutants such as metals and radionuclides. For vadose-zone remediation processes to be successful, the injected aqueous phase should carry chemicals to react with pollutants and precipitate them for immobilization and stabilization purposes. Typical remediation techniques such as water and surfactant injections are not applicable, because of the concerns about downward migration. As a result, understanding foam flow mechanism in-situ is key to the optimal …

An Experimental And Computational Investigation Of Rotating Flexible Shaft System Dynamics In Rotary Drilling Assemblies For Down Hole Drilling Vibration Mitigation, Richard Duff

LSU Doctoral Dissertations

Rotary drilling system vibration has long been associated with damaging the bit, the bottom hole assembly (BHA) and drill string. Vibration has been traditionally measured in the bottom hole assembly, and been closely associated with the resonant behaviors.

This research study proposes an improved physical laboratory model to explore the dynamic behaviors associated with vibration. This model includes contact with the borehole wall allowing a range of stabilization geometries while removing bit-formation interaction effects. The results of exercising the model help develop new insights into both vibration measurement diagnostics and mitigation strategy execution.

Presented here is a review of other …

Measurement Of Interfacial Tension In Hydrocarbon/Water/Dispersant Systems At Deepwater Conditions, Mohamed Abdelrahim

LSU Master's Theses

The events of the Deepwater Horizon oil spill in the Gulf of Mexico were associated with great water depths that made it difficult to understand the behavior of the spilled oil as it came in contact with the seawater. The remedial subsea application of chemical dispersants draws interest to evaluate the interfacial interactions between the oil and water at such great water depths. Most importantly, a quantification of the interfacial tension (IFT) between the spilled oil and seawater at deepwater conditions can provide insight into the effectiveness of the chemical dispersion of spilled oil. In this study, Macondo crude oil …

A Review Of Offshore Blowouts And Spills To Determine Desirable Capabilities Of A Subsea Capping Stack, Louise Matilde Smith

LSU Master's Theses

The events surrounding the Deepwater Horizon disaster have changed the face of deepwater operations. In order to continue drilling in the Gulf of Mexico, the regulatory body, the Bureau of Safety and Environmental Enforcement (BSEE), has required that applications to conduct work in the Gulf of Mexico (GOM) include a plan to stop, capture, or contain any uncontrolled release of fluids. The capping and containment systems built and implemented by BP during the event are an excellent starting point for minimizing pollution from deepwater subsea blowouts, but the system has limitations. The industry recognizes these limits but is currently focused …

An Experimental And Theoretical Critique Of Flow Model Accuracy, Shannon Ray Chollett

LSU Master's Theses

In today’s exploration and production environment it is required that engineers must collect and use vast amounts of data for flow model construction and calibra- tion, as well as reservoir estimation and optimization. With modern technology, the data volume can be overwhelming. It is necessary that data monitoring and calibration are highly efficient. It is also essential that physical and mathematical models can be tested in repeatable, inexpensive experiments. The experiments described in this thesis will develop and perform verification of algorithms and can generate prior geomodels, collect and process seismic refraction data, collect and process production data, and calibrate …

Effect Of Surfactants And Brine Salinity And Composition On Spreading, Wettability And Flow Behavior In Gas-Condensate Reservoirs, Yu Zheng

LSU Doctoral Dissertations

The well-known condensate blockage problem causes severe impairment of gas productivity as the flowing bottom-hole pressure falls below the dew point in gas-condensate reservoirs. Hence, this study attempts to investigate the concept of modifying the spreading coefficient and wettability using low-cost surfactants in the near wellbore region, to prevent the gas flow problems associated with condensate buildup. This study also examines the effect of brine salinity and composition on wettability, spreading and adhesion in condensate buildup regions, to evaluate the ability of brine salinity/composition for enhanced gas productivity in gas-condensate reservoirs. In this study, experiments were performed at both ambient …

Strategies For Real Time Reservoir Management, Yuanyuan Shuai

LSU Doctoral Dissertations

Real–time reservoir management is developed to manage a shrinking labor force and rising demand on energy supply. This dissertation seeks good strategies for real–time reservoir management. First, two simulator–independent optimization algorithms are investigated: ensemble–based optimization (EnOpt) and bound optimization by quadratic approximation (BOBYQA). Multiscale regularization is applied to both to find appropriate frequencies for well control adjustment. Second, two gathered EnKF methods are proposed to save computational cost and reduce sampling error: gathered EnKF with a fixed gather size and adaptively gathered EnKF. Finally, oil price uncertainty is forecasted and quantified with three price forecasting models: conventional forecasting, bootstrap forecasting …

Simulations Of The Primary Cement Placement In Annular Geometries During Well Completion Using Computational Fluid Dynamics (Cfd), Muhammad Zulqarnain

LSU Master's Theses

Effective zonal isolation during primary cementing is only possible when drilling mud in the annulus is completely displaced with cement, while the spacers aid in this process. During the displacement process the rheological properties of fluids used and the operating conditions control the motion of different fluids interfaces; desired stable interfacial displacement leads to piston like motion. Computational Fluid Dynamics (CFD) tool with the Volume-of-Fluid (VOF) has been validated against experimental and used to conduct numerical experiments in a virtual well model consisting of 50 ft vertical section of 8.765" x 12.5" annulus having initially mud and this mud is …

Experimental Study Of The Effect Of Drilling Fluid Contamination On The Integrity Of Cement-Formation Interface, Nnamdi Charles Agbasimalo

LSU Master's Theses

Well cementing is one of the key processes performed during drilling and completion of wells. The main objective of primary cementing is to provide zonal isolation. Failure of cement to provide zonal isolation can lead to contamination of fresh water aquifers, sustained casing pressure, or blowout. For effective cementing, the cement slurry should completely displace the drilling fluid. In practice, this is hard to achieve and some mud is left in the wellbore where it contaminates the cement after cement placement.

This study investigates the effect of mud contamination of cement on the integrity of cement-formation interface. Flow-through experiments were …

Experimental Investigations In Co2 Sequestration And Shale Caprock Integrity, Abiola Olukola Olabode

LSU Master's Theses

More than sixty percent (60%) of conventional hydrocarbon reservoirs which are potential CO2 repositories are sealed by tight shale caprock. The geochemical reactivity of shale caprock during CO2 diffusive transport needs to be included in the reservoir characterization of potential CO2 sequestration sites as slow reactive transport processes can either strengthen or degrade seal integrity over the long term. Several simulation results had predicted that influx-induced mineral dissolution/precipitation reactions within shale caprocks can continuously reduce micro-fracture networks, while pressure and effective-stress transformation first rapidly increase then progressively constrict them. This experimental work applied specific analytical techniques in investigating changes in …

Risk Of Well Integrity Failure Due Sustained Casing Pressure, Koray Kinik

LSU Master's Theses

Sustained casing pressure (SCP) is considered a well integrity problem. The approach of this study is to look at SCP as environmental risk due hydrocarbon release. Currently, the risk is qualified by the value of surface pressure (Pcsg) that may cause failure of casing head. However, the resulting rate of gas emission to the atmosphere is not considered. Also not considered is a possibility of breaching the casing shoe due transmission of Pcsg downhole. The objective of this study is to develop methods for maximum possible air emission rates (MER) and risk of subsurface well integrity failure due SCP. Mathematical …

Numerical Study Of Downhole Heat Exchanger Concept In Geothermal Energy Extraction From Saturated And Fractured Reservoirs, Yin Feng

LSU Doctoral Dissertations

Geothermal energy has gained a lot of attention recently due to several favorable aspects such as ubiquitously distributed, renewable, low emission resources while leveraging the advances in the associated technologies such as directional drilling and low enthalpy power generation plant. However, there are still many challenges such as the high initial capital cost of drilling and surface facilities, environmental risk of seismicity due to the induced disequilibrium in the formation, and sustainability of project over designed operational life. Traditional downhole heat exchangers (DHE) could potentially reduce the capital cost and the risk of seismicity, but they are unable to maintain …

Analytical Design Method For Cold Production Of Heavy Oil With Bottom Water Using Bilateral Sink Wells, Wenting Qin

LSU Doctoral Dissertations

Few heavy oil reservoirs with strong bottom water drives have been developed successfully because of severe water coning. Water coning tends to cause low ultimate recovery, low well productivity, and high water production. Although thermal and gravity-assisted methods might improve recovery in oil reservoirs, such methods are widely perceived as either economically unfavorable or technologically infeasible. This study proposes a new, cold production technique, called Bilateral Water Sink (BWS), to meet those challenges. The BWS method suppresses water cresting by producing oil and water simultaneously from separate, horizontal wells completed in the oil and water zones; the oil and water …

Evaluation Of Simultaneous Water And Gas Injection Using Co2, Shrinidhi Shetty

LSU Master's Theses

Miscible CO2 injection is the second largest contributor to global enhanced oil recovery, as it has successfully undergone extensive laboratory tests and field applications for recovering residual oil left behind after waterflooding. Prolific incremental recoveries have been obtained for some fields. Although miscible CO2 injections generally have excellent microscopic displacement efficiency they often result in poor sweep efficiency. In order to address sweep problems and maximize recoveries, other schemes of gas injection have been developed. Two such processes are water-alternating-gas (WAG) and simultaneous water-and-gas (SWAG) injection. WAG and SWAG have been successfully used to minimize poor sweep. Improved gas utilization …

Simulation Study Of Sweep Improvement In Heavy Oil Co2 Floods, Venu Gopal Rao Nagineni

LSU Master's Theses

Enhanced oil recovery by CO2 injection is a common application used for light oil reservoirs since CO2 is relatively easily miscible with light oils. CO2 flooding in heavy oil reservoirs is often uneconomic due to unfavorable mobility ratios. Reservoir heterogeneity further complicates the process as CO2 channels through high permeability layers leading to premature breakthrough. However, this can be controlled by choosing a suitable modification to the CO2 injection process enabling better sweep efficiencies, and making the process economic. The current work focuses on two such methods; water-alternating-gas injection (WAG) and profile modification by blocking gas flow in the high …

Modeling Effects Of Coupled Convection And Co2 Injection In Stimulating Geopressured Geothermal Reservoirs, Tatyana Plaksina

LSU Master's Theses

Geopressured geothermal brines are a vast geothermal resource in the US Gulf of Mexico region. In particular, geopressured sandstones near salt domes are potential sources of geothermal energy because salt diapirs with high thermal conductivities may pierce younger, cooler strata. These characteristics enhance transfer heat from older, hotter strata at the base of the diapir into shallower strata. Moreover, widespread geopressure in the Gulf region tends to preserve permeability, enhancing productivity. As an example, the Camerina A sand of South Louisiana was chosen as a geomodel for a numerical simulation study of effects of CO2 injection and coupled convection as …

Pore-Scale Lattice Boltzmann Simulations Of Inertial Flows In Realistic Porous Media: A First Principle Analysis Of The Forchheimer Relationship, Chukwudi Paul Chukwudozie

LSU Master's Theses

With recent advances in the capabilities of high performance computing (HPC) platforms and the relatively simple representation of complex geometries of porous media, lattice Boltzmann method (LBM) has gained popularity as a means of solving fluid flow and transport problems. In this work, LBM was used to obtain flow parameters of porous media, study the behavior of these parameters at varying flow conditions and quantify the effect of roughness on the parameters by relating the volume averaged flow simulation results to Darcy and Forchheimer equations respectively. To validate the method, flow was simulated on regular and random sphere arrays in …

Characterization Of Foam Flow In Pipes Using Two Flow Regime Concept, Rahul Narayanrao Gajbhiye

LSU Doctoral Dissertations

The objective of this study is to investigate the characteristics of foam flow behavior in pipes in a wide range of experimental conditions, including two pipe materials (stainless steel and nylon pipes with about 0.36 - 0.38 inch in inner diameter and 12 ft in length), three surfactant formulations (Cedepal FA-406, Stepanform-1050, and Aquet-944), and three surfactant concentrations (0.1, 0.5, and 5 wt%). The concept of “two foam-flow regimes”, consisting of high-quality regime and low-quality regime, is at the heart of interpreting the experimental data. The experimental results in horizontal pipes showed the presence of two distinct high-quality and low-quality …

“Hydraulic Fracturing Efficiency In The Olmos Sand Formation”, Lauren N. Fogarty

Honors Capstones

No abstract provided.

Characterization Of Rock/Fluids Interactions At Reservoir Conditions, Dayanand Saini

LSU Doctoral Dissertations

In this study, interfacial phenomena of spreading, wettability, and rock/oil adhesion interactions in complex rock/oil/water systems were characterized at reservoir conditions of elevated pressures and temperatures. Capabilities of both ambient and reservoir condition optical cells were used for measuring the oil/water interfacial tension and dynamic (the water-receding and the water-advancing) contact angles for various complex rock/oil/water systems. Well known sessile oil drop volume alteration method was successfully used in this study for evaluating the applicability of the modified Young’s equation for characterizing the line tension in complex rock/oil/water systems at reservoir conditions. This appears to be first time when rock/fluids …

An Experimental Study Of Surfactant Enhanced Waterflooding, Paulina Metili Mwangi

LSU Master's Theses

Surfactants have a variety of applications in the petroleum industry due to their remarkable ability to lower the oil-water interfacial tension and alter wettability. However, surfactant adsorption on rock surfaces has severely crippled this means of improving oil recovery due to the high cost associated with the large quantities of surfactant needed. A previous experimental study by Ayirala (2002) reported the development of mixed wettability using a nonionic surfactant. At this mixed-wet state he was able to recover about 94% of the original oil in place. The underlying motivation of this study was to achieve such high recoveries without using …

Experimental Study On Single Cement Fracture Exposed To Co2 Saturated Brine Under Dynamic Conditions, Tevfik Yalcinkaya

LSU Master's Theses

Carbon capture and storage is one of the technologies that could help reduce CO2 concentration in the atmosphere while contributing to cutback of Greenhouse Gas emissions. Depleted oil and gas fields are favorable targets for CO2 storage because existing wells can be readily used as injection wells. However, a number of abandoned wells also serve as gateway to the reservoir which should be considered in the context of effective Carbon capture and storage. Wellbore cement is a very essential element in wellbore systems that serve as a barrier between different zones in the subsurface. The fractures inside wellbore cement sheath, …