Petroleum Engineering Commons^™

An Experimental Study Of Fractional Wettability Effects On Gas Assisted Gravity Drainage (Gagd), Abdullah Abdulrahman A. Al-Tameemi

LSU Master's Theses

Utilizing the power of nature to solve engineering problems has been a time-honored tradition, for example, using the sunlight as a heat and light source. From this principle, the visionary idea of Gas Assisted Gravity Drainage (GAGD) came. The GAGD process utilizes the natural segregation phenomenon of fluids with different densities in order to produce oil efficiently and economically. Waterflooding processes typically do not recover more than 40% of the original oil in place (OOIP), leaving a vast amount of oil behind. A practical and well-planned enhanced oil recovery (EOR) method is needed. However, to plan a successful project, the …

Modeling Of Leakage Through Fault-Zone Structures In Co2 Geological Storage, Dayna Rodriguez Zambrano

LSU Master's Theses

Faults intersecting target geological CO₂ storage zones have important implications for storage integrity. Potential leakage pathways due to fluid over-pressurization are investigated in this project to ensure long-term containment of injected CO₂. Numerical flow simulations coupled with a geomechanical module are presented in this work with the purpose of determining the extent of CO₂ up-fault migration, the driving mechanisms of leakage and the corresponding response of quantified pore pressure and stress variations.

This study uses dual-continuum models performed by using CMG (2017) to correctly account of flow through fractures in a fault damage zone. Numerical simulations …

Temperature Transient Analysis For Reservoir Characterization, Yilin Mao

LSU Doctoral Dissertations

Recent developments in downhole temperature measurements open new alternatives contributing to reservoir characterization. In this dissertation, novel forward and inverse models to analyze production- and injection-induced temperature signals are developed for conventional and unconventional reservoir applications. Important limitations of the proposed models are addressed by accounting for fluid property variations and complex production strategies.

Forward modeling approaches involve making relevant assumptions that allow rigorous analytical solutions to be constructed using Laplace transform, Method of Characteristics, and control volume analysis. Our results of the analytical models are benchmarked with those from commercial numerical simulation software. Multiple possible scenarios of conventional reservoirs …

An Improved Method To Calculate Gas-Lift Valve Set Pressure And Valve Performance Curves, Khadhr A Kh Altarabulsi

LSU Doctoral Dissertations

The main objective of this work is toimprove the accuracy on calculations of design set pressure and performance curves (sizing equations) for Gas-Lift Valves (GLVs) at high pressure (real conditions). This improved calculation method is demonstrated to have an important effect on well unloading and production operations.

The analysis of the valve design set pressure includes an experimental evaluation of the effect of internal dome volume changes on the design set pressure due to the presence of silicone and thermal effects. The evaluationis carried out for different levels of GLV silicone fill, pressures and temperatures. Silicone fills covered 7.5, 10, …

Investigation Of Flow Mechanisms In Gas-Assisted Gravity Drainage Process, Iskandar Dzulkarnain

LSU Doctoral Dissertations

In this study we investigate displacement mechanism for oil recovered using Gas- Assisted Gravity Drainage (GAGD) method. For a typical oil recovery under gravity drainage, the recovery profile can be characterized by an initial bulk flow which occurs rapidly and a later film flow that extends for a longer duration. It is the latter period where film spreading, the ability of oil to spread above water in the presence of gas, is identified as the displacement mechanism responsible for recovering the remaining oil in gravity drainage process. Literature survey indicates that mathematical models for gravity drainage do not account for …

Investigation Of Flow Mechanisms In Gas-Assisted Gravity Drainage Process, Iskandar Dzulkarnain

LSU Doctoral Dissertations

In this study we investigate displacement mechanism for oil recovered using Gas- Assisted Gravity Drainage (GAGD) method. For a typical oil recovery under gravity drainage, the recovery profile can be characterized by an initial bulk flow which occurs rapidly and a later film flow that extends for a longer duration. It is the latter period where film spreading, the ability of oil to spread above water in the presence of gas, is identified as the displacement mechanism responsible for recovering the remaining oil in gravity drainage process. Literature survey indicates that mathematical models for gravity drainage do not account for …

Development Strategies For A Fractured, Heavy Oil Reservoir - Results From Numerical Simulations, German Albertovich Abzaletdinov

LSU Master's Theses

This research is focused on studying reservoir “N” in the Yarega heavy oilfield (YHOF) for development strategies and production optimization. YHOF is a naturally fractured heavy oil field where only very recently SAGD technology has been introduced. The motivation for this research is derived from the fact that SAGD employed in this field has so far resulted in early steam breakthrough leading to producer abandonment and new drilling, thus increasing costs. This study explores numerically different static and dynamic reservoir characterization models (single porosity versus dual porosity systems), and subsequent pressure-production history matched reservoir simulation for understanding heat and mass …

Experimental And Numerical Investigation Of Liquid-Assisted Gas-Lift Unloading, Renato Peixoto Coutinho

LSU Doctoral Dissertations

The case for a unique form of gas-lift unloading, termed “Liquid-Assisted Gas-Lift (LAGL),” is presented. This work demonstrates that the injection of a gas-liquid mixture allows transport of gas to a deep injection point utilizing injection pressure considerably lower than single-phase gas injection. The LAGL is demonstrated in a 2,880 ft deep test well. The test well is kicked-off using an injection pressure that would normally be lower than the pressure for single-point single-phase gas injection at this depth. Experimental results indicate that the LAGL can lower the injection pressure by up to 75%.

This work breaks the LAGL system …

Mobility Of Nano-Particles In Rock Based Micro-Models, Jagannath Upadhyay

LSU Doctoral Dissertations

A confocal micro-particle image velocimetry (C-μPIV) technique along with associated post-processing algorithms is detailed for obtaining three dimensional distributions of nano-particle velocity and concentrations at select locations of the 2.5D (pseudo 3D) Poly(methyl methacrylate) (PMMA) and ceramic micro-model. The designed and fabricated 2.5D micro-model incorporates microchannel networks with 3D wall structures with one at observation wall which resembles fourteen morphological and flow parameters to those of fully 3D actual reservoir rock (Boise Sandstone) at resolutions of 5 and 10 μm in depth and 5 and 25 μm on plane. In addition, an in-situ, non-destructive method for measuring the geometry of …

Thermogenic Gas Hydrate Formation In Gulf Of Mexico Offshore Environment- Results From Numerical Simulation, Sulav Dhakal

LSU Master's Theses

Development of civilization and the resulting quest for energy have led us to previously uncharted territory in exploration and production of fuel. As the demand continues to grow and conventional oil reserves become depleted, we are looking into unconventional resources such as gas hydrates. However, due to the volatile nature of the energy market and production technology yet to perfected, we are not able to fully utilize the potential of gas hydrates yet.

Reservoir characterization of hydrates have so far been limited to seismic mapping, well log interpretation and laboratory scale studies. This research uses numerical simulation to understand the …

Simulating Fluid Flow And Gas Expansion In The Marine Riser Using Computational Fluid Dynamics (Cfd) Software, Ross Teichman

Honors Capstones

No abstract provided.

Pore-Scale Analysis Of Interfacial Instabilities And Impact Of Heterogeneity On Relative Permeability By Lattice Boltzmann Method, Zhipeng Zhu

LSU Master's Theses

Interfacial instabilities occur often during immiscible fluid flow through porous media and their understanding is essential for waterflooding operations or other oil recovery processes. Although many studies including experimental and numerical have been done to reproduce and analyze the interfacial instabilities in porous median, there is still significant knowledge gap in fundamental understanding of these flow instabilities at the pore-scale. In order to better understand the interfacial instabilities phenomenon, the pore-scale simulations are performed. In this study, Lattice Boltzmann Method is used to simulate two different types of interfacial instabilities: viscous fingering and capillary fingering in irregular sphere packs by …

Magnetic Gradient Drilling, Garrett Lowry Nielsen

LSU Master's Theses

The drilling industry has always had difficulties with staying within the mud weight window. The problems associated with failure to stay within the mud weight window include uncontrolled influxes and wellbore collapse on the low pressure side of the window, and fluid losses and wellbore damage on the high pressure side of the window. When the risk for getting outside of this mud window becomes too great, casing must be set in order to isolate formations from each other. If too many strings of casing are set, or if the damage from getting out of the mud weight window is …

Effect Of Pipe Rotation On Casing Pressure Within Mpd Applications, Zahrah Ahmed Al Marhoon

LSU Master's Theses

Well control is one of the most crucial sectors in drilling engineering. Human lives and safety depend on the correct execution of the engineering design. Managed Pressure Drilling (MPD) is a new technology that has recently emerged in the oil and gas industry. It has special well control abilities supported by the RCD to continue drilling or carry operations that involve pipe rotation, while circulating out a gas kick. This thesis examines the effect of pipe rotation on casing pressure profiles within MPD kick circulation application. The analysis was carried on real scale kick experiments. These experiments were carried in …

Image-Based Modeling Of Flow Through Porous Media: Development Of Multiscale Techniques For The Pore Level, Timothy Wayne Thibodeaux

LSU Doctoral Dissertations

Increasingly, imaging technology allows porous media problems to be modeled at microscopic and sub-microscopic levels with finer resolution. However, the physical domain size required to be representative of the media prohibits comprehensive micro-scale simulation. A hybrid or multiscale approach is necessary to overcome this challenge. In this work, a technique was developed for determining the characteristic scales of porous materials, and a multiscale modeling methodology was developed to better understand the interaction/dependence of phenomena occurring at different microscopic scales. The multiscale method couples microscopic simulations at the pore and sub-pore scales. Network modeling is a common pore-scale technique which employs …

Mechanistic Modeling Of Nanoparticle-Stabilized Supercritical Co2 Foams And Its Implication In Field-Scale Eor Applications, Doris Patricia Ortiz Maestre

LSU Master's Theses

Previous experimental studies show that nanoparticle-stabilized supercritical CO₂ foams (or, NP CO₂ foams) can be applied as an alternative to surfactant foams, in order to reduce CO₂ mobility in gas injection enhanced oil recovery (EOR). These nanoparticles, if chosen correctly, can be an effective foam stabilizer attached at the fluid interface in a wide range of physicochemical conditions.

By using NP CO₂ foam experiments available in the literature, this study performs two tasks: (i) presenting how a mechanistic foam model can be used to fit experimental data and determine required model parameters, and (ii) investigating the …

Diagenesis And Formation Stress In Fracture Conductivity Of Shaly Rocks; Experimental-Modelling Approach In Co2-Rock Interactions, Abiola Olukola Olabode

LSU Doctoral Dissertations

In large scale subsurface injection of carbon dioxide (CO₂) as obtainable in carbon sequestration programs and in environmentally friendly hydraulic fracturing processes (using supercritical CO₂), long term rock-fluid interaction can affect reservoir and seal rocks properties which are essential in monitoring the progress of these operations. The mineralogical components of sedimentary rocks are geochemically active particularly under enormous earth stresses, which generate high pressure and temperature conditions in the subsurface. While geomechanical properties such as rock stiffness, Poisson’s ratio and fracture geometry largely govern fluid flow characteristics in deep fractured formations, the effect of mineralization can …

Experimental Study And Modeling Of Smart Loss Circulation Materials; Advantages And Promises, Ahmed Khaled Abdelmaksoud Mansour

LSU Master's Theses

Lost circulation occurs when mud or cement is lost to the formation while drilling. Lost circulation has been a huge problem and may cause heavy financial costs in the form of lost rig time, mud fluid and in severe cases, well blowout with serious environmental and safety consequences. Despite extensive advances in the last couple of decades, lost circulation materials used today still have disadvantages such as damaging production zones, plugging drilling tools or failing to seal the fractures. Here, we propose a new class of smart expandable lost circulation material (LCM) to remotely control the expanding force and functionality …

Quantitative Analysis Of High Pressure Hazards In Oil And Gas Field Operations, Giuseppe Feo

Honors Capstones

No abstract provided.

Performance Evaluation Of Virtual Flow Metering Models And Its Application To Metering Backup And Production Allocation, Kahila Mokhtari Jadid

LSU Doctoral Dissertations

In the oil and gas industry, reliable and accurate measurements of the amount of oil, gas and water being produced by individual wells is essential. The production revenue for each well is determined from measured flow rates. Measurement of well production can be achieved by using multiphase flow meters on individual wells. However, the use of such metering technique is not always reliable or economical. As an alternative technique to monitoring individual well performance in real-time, multiphase flow simulators together with pressure and temperature sensors located at different locations in the production systems have been recently deployed to estimate individual …

Evaluation Of Compositional Effects On Gas-Oil Miscibility And Gas-Assisted Gravity Drainage (Gagd) Eor Process, Mohamed Al Riyami

LSU Doctoral Dissertations

The Vanishing interface technique (VIT), offers fast and accurate determination of minimum miscibility pressure (MMP) between the reservoir crude oil and the various gases injected for enhancing oil recovery (EOR). The technique is based on miscibility being the condition where an interface between the injected fluid and the reservoir crude oil vanishes. This research has evaluated the effect of the gas-oil ratio on zero-IFT pressure. VIT experiments were simulated using an equation of state (EOS) and the Parachor model. This work proves the robustness of VIT in estimating miscibility pressures for gas injection EOR projects. Also this work presents a …

The Role Of Surface Active Compounds In Crude Oil On Reservoir Wettability., Paulina Metili Mwangi

LSU Doctoral Dissertations

This study examines the role of crude oil’s surface active compounds (SAC) in determining the reservoir wettability. Wettability describes the relative preference of a reservoir rock for oil or water. Wettability influences the distribution of fluids in a reservoir and the efficiency of oil recovery methods. Unfortunately, the chemical mechanisms controlling wettability in individual reservoirs remain hazy. Wettability is conditional and is influenced by rock mineralogy, fluid chemistry, and temperature. An extensive experimental study was executed to understand the impact of naturally-occurring SACs typically found in crude oil, on the wettability of sandstone and carbonate rocks over a range of …

The Exacerbating Effect Of Coastal Erosion To Orphan Well Risk Analysis In Terrebonne Parish, Taylor Reeves

Honors Capstones

No abstract provided.

Mathematical Scaling And Statistical Modeling Of Geopressured Geothermal Reservoirs, Esmail Ansari

LSU Doctoral Dissertations

The interest for developing geopressured-geothermal reservoirs along the US Gulf Coast is increasing for securing energy needs and reducing global warming. Identifying the most attractive candidate reservoirs for geothermal energy production requires quick and simple models. Analytical models are not always available and simulating each case individually is expensive. The use of scaling and statistical modeling is one approach to translate the output of a simulator into quick models with general applicability at all scales. The developed models can quickly estimate temperature and thermal energy recovery from the geopressured-geothermal reservoirs. These models can screen large databases of reservoirs to select …

Simulation Studies For Relative Importance Of Unconventional Reservoir Subgrid Scale Physics Parameters, Yaakoub Youssef El Khamra

LSU Doctoral Dissertations

In this endeavor we attempt to better understand gas transport in shale gas reservoirs, specifically the impact and effects of different physical phenomena. We start by documenting the nature of the reservoirs and the need for accurate modeling of various physical phenomena in multiple interconnected continua. The physical phenomena of interest include non-linear Forchheimer flow, Knudsen diffusion in the form of slip "Klinkenberg" flow and adsorption/desorption. The numerical methods used in the reservoir simulator are also introduced, along with a derivation of the main equations used. Various verification and validation results are compared against manufactured and analytical solutions and finally …

Development Of Single-Well Gas Assisted Gravity Drainage Process For Enhanced Oil Recovery, Bikash Deep Saikia

LSU Doctoral Dissertations

EOR application in prolific deepwater Gulf of Mexico (DGOM) reservoirs has remained a challenge. Exorbitant well cost (>200M$) precludes having extensive injection patterns and very characteristics of the reservoirs themselves are partly to blame for negligible EOR activity in DGOM. We have been able to develop and demonstrate a novel design in the form of Single Well – Gas Assisted Gravity Drainage (SW-GAGD) process, which is potentially cost effective, at the same time ensuring very high oil recoveries. In this design, a single well acts as an injector as well as a producer, thereby minimizing well cost. The efficacy …

Statistical Reservoir Characterization, Simulation, And Optimization Of Field Scale-Gas Assisted Gravity Drainage (Gagd) Process With Uncertainty Assessments, Watheq Jasim Mohammed Al-Mudhafar

LSU Doctoral Dissertations

Unlike the Continuous Gas Injection (CGI) and Water-Alternative Gas (WAG), the Gas Assisted Gravity Drainage (GAGD) process takes advantage of the natural segregation of reservoir fluids to provide gravity-stable oil displacement. The gas is injected through existing vertical wells to formulate a gas cap to allow oil and water drain down to the horizontal producer (s). Therefore, the GAGD process was implemented through immiscible and miscible injection modes to improve oil recovery in a sector of the main pay/upper sandstone member in the South Rumaila oil field, located in Iraq. A high-resolution geostatistical reservoir characterization model was constructed to model …

Modelling Hydraulic Fracturing Propagation In Heterogeneous Reservoirs Using Cohesive Zone Methods, Miguel Alejandro Gonzalez-Chavez

LSU Doctoral Dissertations

The recent success in exploiting low permeability shale reservoirs has heavily relied on hydraulic fracturing to produce hydrocarbons economically in disadvantaged reservoir conditions. Although horizontal drilling significantly increases the contact area between the wellbore and the reservoir, the objective of hydraulic fracturing is set on creating further expanded conductive flow paths into the reservoir. This research uses cohesive zone method to numerically simulate hydraulic fracture propagation in the presence of natural fractures in two- and three-dimensional model. The Cohesive element approach limits fracture propagation to some predefined paths. However, in highly fractured formations since hydraulic fractures are growing through a …

Expandable Proppants For Hydraulic Fracturing, Livio Yang Santos

LSU Master's Theses

Hydraulic fracturing is recognized as the primary technique to achieve economic oil and gas production from low permeability reservoirs like shale and tight-sand formations. One of the main challenges facing the oil and gas industry is maintaining the proppant functionality in the subsurface where replacement of proppant is only possible by expensive refracturing operations. Proppant crushing and proppant embedment have posed challenges for sustainable production from stimulated wells especially in soft and deep formations like Haynesville Shales. Experimental measurements show the strong impact of proppant stress and proppant embedment on reducing fracture conductivity. In this work, we introduce a new …

Application Of The Variational Fracture Model To Hydraulic Fracturing In Poroelastic Media, Chukwudi Chukwudozie

LSU Doctoral Dissertations

Hydraulic fracturing has persisted through the use of simple numerical models to describe fracture geometry and propagation. Field tests provide evidence of interaction and merging of multiple fractures, complex fracture geometry and propagation paths. These complicated behaviors suggest that the simple models are incapable of serving as predictive tools for treatment designs. In addition, other commonly used models are designed without considering poroelastic effects even though a propagating hydraulic fracture induces deformation of the surrounding porous media. A rigorous hydraulic fracturing model capable of reproducing realistic fracture behaviors should couple rock deformation, fracture propagation and fluid flow in the both …