Petroleum Engineering Commons^™

Investigation Of Gas Dynamics In Water And Oil-Based Muds Using Das, Dts, And Dss Measurements, Temitayo S. Adeyemi

LSU Master's Theses

Reliable prediction of gas migration velocity, void fraction, and length of gas-affected region in water and oil-based muds is essential for effective planning, control, and optimization of drilling operations. However, there is a gap in our understanding of gas behavior and dynamics in water and oil-based muds. This is a consequence of the use of experimental systems that are not representative of field-scale conditions. This study seeks to bridge the gap via the well-scale deployment of distributed fiber-optic sensors for real-time monitoring of gas behavior and dynamics in water and oil-based mud. The aforementioned parameters were estimated in real-time using …

Would Self-Supported Fracture Contribute To The Hydrocarbon Production In Shale Reservoir Besides Proppant-Supported Fracture, Y. Sun, G. Li, S. Zeng, J. Wu, J. Liu, M. Xu, C. Dai, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

During hydraulic fracturing in deep shale gas reservoirs, it is difficult to pump proppants long distances, and self-supported fractures are formed at the far and upper ends of the fractures. The self-supported fracture could hold the fracture space by its surface structure again fracture closure. However, it faces various aspects of impairment during shale gas reservoir development, which affect its conductivity. Among the impairment, long-term production results in a decline of bottom hole pressure, which will compact the fracture space, and self-supported fractures without proppant are more sensitive than those with proppant. In this paper, we conducted a series of …

Lessons Learned From Laboratory Study And Field Application Of Re-Crosslinkable Preformed Particle Gels Rppg For Conformance Control In Mature Oilfields With Conduits/Fractures/Fracture-Like Channels, Baojun Bai, Thomas P. Schuman, David Smith, Tao Song

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This Paper Surveys the Role of Re-Crosslink able Preformed Particle Gels (RPPG) in Addressing Conformance Challenges within Mature Oilfields. Despite Widespread Preformed Particle Gel (PPG) Application in 15,000+ Wells, their Limitations in Sealing Fractures and Conduits Prevalent in Mature Reservoirs Have Driven the Development of RPPG Formulations. Synthesized in Various Sizes from Micrometer to Millimeter Levels, These Environmentally Friendly RPPGs Are Tailored for Diverse Reservoir Conditions. Findings Showcase the Successful Laboratory-Scale Creation and Upscaling of RPPG Products, Offering Adaptability to Temperatures from 20 to 175°C, Customizable Sizes, Swelling Ratios (5 to 40 Times), and Re-Crosslinking Times Spanning Minutes to Days. …

Novel Re-Crosslinkable Preformed Particle Gels (Rppg) For Parent- And Infill-Well-Fracture Interactions Mitigation, Xiaojing Ge, Adel Alotibi, Ahmed Al-Hlaichi, Yanbo Liu, Tao Song, Junchen Liu, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Hydraulic fracturing treatments in unconventional infill (or "child") wells can be significantly affected by depletion from existing parent-well, resulting in asymmetrical fracture growth. These issues may lead to excessive load-water production, proppant deposition, casing deformation in the parent well, and unbalanced stimulation of infill wells. To mitigate these effects, various strategies have been proposed, including the use of far-field diverters in child wells and repressurization of parent wells. Additionally, an increasingly popular strategy involves injecting near-wellbore diverters to temporarily plug entry points into the parent wellbores during frac operations on infill wells. To achieve better application, a novel low-cost, self-degradable, …

Descriptive Statistical Analysis Of Experimental Data For Wettability Alteration With Smart Water Flooding In Carbonate Reservoirs, Muhammad Ali Buriro, Mingzhen Wei, Baojun Bai, Ya Yao

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Smart water flooding is a promising eco-friendly method for enhancing oil recovery in carbonate reservoirs. the optimal salinity and ionic composition of the injected water play a critical role in the success of this method. This study advances the field by employing machine learning and data analytics to streamline the determination of these critical parameters, which are traditionally reliant on time-intensive laboratory work. the primary objectives are to utilize data analytics to examine how smart water flooding influences wettability modification, identify key parameter ranges that notably alter the contact angle, and formulate guidelines and screening criteria for successful lab design. …

Experimental Data Supporting Co2 Enhanced Oil Recovery And Storage Potential In The Bakken Petroleum System (Bps), University Of North Dakota. Energy And Environmental Research Center

EERC Brochures and Fact Sheets

Fact sheet on CO₂ enhanced oil recovery (EOR) in the Bakken petroleum system. Highlights experimental data concerning CO₂’s role in oil recovery in the region.

Dual Crosslinked Poly(Acrylamide-Co-N-Vinylpyrrolidone) Microspheres With Re-Crosslinking Ability For Fossil Energy Recovery, Jingyang Pu, Baojun Bai, Jiaming Geng, Na Zhang, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Microspheres have been proposed to be applied in controlling wastewater production for mature oilfields and migrating leakage for gas and nuclear waste storage. However, it remains challenging for stacked microspheres to maintain strong blocking ability in micron-sized small pores or fractures. In this study, a novel microsphere was developed with comprehensive properties including high deformability and long re-crosslinking time upon tunable swelling ratio for the applications. A dual covalent and physical crosslinking strategy was used to develop novel microspheres reinforced by a hydrogen bond (H-bond, between pyrrole ring and amide group) and coordination bond (between chromium acetate (CrAc) and carboxyl …

Dual Crosslinked Poly(Acrylamide-Co-N-Vinylpyrrolidone) Microspheres With Re-Crosslinking Ability For Fossil Energy Recovery, Jingyang Pu, Baojun Bai, Jiaming Geng, Na Zhang, Thomas Schuman

Chemical and Biochemical Engineering Faculty Research & Creative Works

Microspheres have been proposed to be applied in controlling wastewater production for mature oilfields and migrating leakage for gas and nuclear waste storage. However, it remains challenging for stacked microspheres to maintain strong blocking ability in micron-sized small pores or fractures. in this study, a novel microsphere was developed with comprehensive properties including high deformability and long re-crosslinking time upon tunable swelling ratio for the applications. a dual covalent and physical crosslinking strategy was used to develop novel microspheres reinforced by a hydrogen bond (H-bond, between pyrrole ring and amide group) and coordination bond (between chromium acetate (CrAc) and carboxyl …

A Systematic Design Approach For Bulk Gel Treatments Based On Gel Volume-Concentration Ratio In Field Projects, Munqith Aldhaheri, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Controlling excessive water production in mature oil fields has always been a desired objective of the oil and gas industry. This objective calls for planning of more effective water-control gel treatments with optimized designs to obtain more attractive outcomes. Unfortunately, planning such effective treatments remains a dilemma for reservoir engineers due to the lack of methodical design tools in the industry. This paper presents a novel systematic design approach for polyacrylamide-Based bulk gel treatments by classifying their field projects according to the gel volume-concentration ratio (VCR) into three design types. in terms of one another, the approach estimates either the …

Seismic Azimuthal Anisotropy Beneath A Fast Moving Ancient Continent: Constraints From Shear Wave Splitting Analysis In Australia, Kailun Ba, Stephen S. Gao, Jianguo Song, Kelly H. Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Seismic Azimuthal Anisotropy Beneath Australia is Investigated using Splitting of the Teleseismic PKS, SKKS, and SKS Phases to Delineate Asthenospheric Flow and Lithospheric Deformation Beneath One of the Oldest and Fast-Moving Continents on Earth. in Total 511 Pairs of High-Quality Splitting Parameters Were Observed at 116 Seismic Stations. Unlike Other Stable Continental Areas in Africa, East Asia, and North America, Where Spatially Consistent Splitting Parameters Dominate, the Fast Orientations and Splitting Times Observed in Australia Show a Complex Pattern, with a Slightly Smaller Than Normal Average Splitting Time of 0.85 ± 0.33 S. on the North Australian Craton, the Fast …

Coreflooding Evaluation Of Fiber-Assisted Recrosslinkable Preformed Particle Gel Using An Open Fracture Model, Shuda Zhao, Ali Al Brahim, Junchen Liu, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Recrosslinkable Preformed Particle Gels (RPPGs) Have Been Used to Treat the Problem of Void Space Conduits (VSC) and repair the "Short-Circuited" Waterflood in Alaska's West Sak Field. Field Results Showed a 23% Increase in Success Rates over Typical Preformed Particle Gel (PPG) Treatments. in This Paper, We Evaluated Whether Adding Fiber into RPPGs Can Increase the RPPG Plugging Efficiency and Thus Further Improve the Success Rate. We Designed Open Fracture Models to Represent vs.C and Investigated the Effect of Swelling Ratio (SR), Fracture Size, and Fiber Concentration on Gel Injection Pressure, Water Breakthrough Pressure, and Permeability Reduction. Results Show that …

Lysine Crosslinked Polyacrylamide─A Novel Green Polymer Gel For Preferential Flow Control, Tao Song, Baojun Bai, Yugandhara Eriyagama, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Acrylamide-based polymer gels have been applied to control the preferential flow in the subsurface for decades. However, some commonly used crosslinkers, such as Cr (III) and phenol-formaldehyde, are highly toxic and are being phased out because of stringent environmental regulations. This work uses l-lysine as the green crosslinker to produce acrylamide-based polymer gels. This article systematically studied the effect of lysine and polymer concentration, salinity, pH, and temperature on gelation behavior and thermal stability. Besides, the gelation mechanism and crosslinking density were elucidated in this work. A high-permeability sandstone core was used to test the plugging efficiency of this novel …

Comprehensive Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For The Water Management Of Reservoir With Concentrated Divalent Ions, Tao Song, Mohamed Ahdaya, Zhanmiao Zhai, Thomas P. Schuman, Baojun Bai

Chemistry Faculty Research & Creative Works

As one of the most widely used technology to ameliorate the reservoir's heterogeneity, polymer gels have been applied for more than 60 years. However, how to plug fractured reservoirs with significant abnormal features, high temperature and high salinity, especially the divalent cations, is still a challenging target. This work systematically evaluated a novel salt-resistant re-crosslinkable preformed particle gel (SR-RPPG) designed for fractured reservoirs with excellent salt resistance (up to 5 % CaCl₂). We evaluated the swelling kinetics, thermal stability and plugging efficiency of this SR-RPPG. We assessed the swelling kinetic and re-crosslinking behavior of the SR-RPPG through the …

Insights To Surfactant Huff-Puff Design In Carbonate Reservoirs Based On Machine Learning Modeling, Ya Yao, Yue Qiu, Yue Cui, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Surfactants could react with adsorbates on carbonate rock surface to alter wettability from oil-wetness to water-wetness, which is effective to enhance oil recovery. Surfactant huff-puff treatment is mostly applied for this purpose and the resulting surfactant performance is the outcome of complex interfacial processes. Currently, the effect of important parameters on surfactant performance is not completely reported and the contribution of each parameter to surfactant performance is hard to be quantified. Traditional methods to optimize surfactant performance are time-consuming and show strong dependency on extensive experiments. in this paper, we address these problems from machine learning (ML) perspectives. Several ML …

Transport And Plugging Performance Evaluation Of A Novel Re-Crosslinkable Microgel Used For Conformance Control In Mature Oilfields With Super-Permeable Channels, Adel Alotibi, T. Song, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preformed particle gels (PPG) have been widely applied in oilfields to control excessive water production. However, PPG has limited success in treating opening features because the particles can be flushed readily during post-water flooding. We have developed a novel micro-sized Re-crosslinkable PPG (micro-RPPG) to solve the problem. The microgel can re-crosslink to form a bulk gel, avoiding being washed out easily. This paper evaluates the novel microgels' transport and plugging performance through super-permeable channels. Micro-RPPG was synthesized and evaluated for this study. Its storage moduli after fully swelling are approximately 82 Pa. The microgel characterization, self-healing process, transportation behavior, and …

Structural Evolution Of The Phu Kradung Formation By Calcite Veins Characterization, South Of Lam Sonthi District, Lopburi Province., Ausa Nonthason

Chulalongkorn University Theses and Dissertations (Chula ETD)

Calcite veins in Mesozoic sedimentary rock localities are found in the southern part of Lam Sonthi district, Lopburi province, in central Thailand, near the Loei-Petchabun fold belt regions. The vein’s host rocks are siliciclastic rocks, primarily mudstone and sandstone. The main aim of this study is to learn more about calcite vein geometry and development, as well as the structural evolution of calcite veins in the Phu Kradung formation in the Lam Sonthi area of Lopburi province. A petrographic and structural analysis of the veins was performed to examine the kinematics and geological structures of the calcite vein in the …

Geophysical Characteristics Of Kuan Kreng Peat Swamp Forest At Thale Noi Area, Theethach Phiranram

Chulalongkorn University Theses and Dissertations (Chula ETD)

Peatlands, as an important carbon sink, store a large amount of atmospheric carbon. However, peatlands are vulnerable to environmental alteration due to anthropogenic and natural processes. While peatlands are degraded, carbon dioxide emissions arise. The Kuan Kreng peat swamp forest is the second largest peatland in Thailand and is in coastal wetland serving for carbon stock in the subsurface. To assess carbon stock in peatland, the thickness and distribution of the peat layer are necessary. This study determines physical and chemical characteristics of the peatlands in the coastal wetland, southern Thailand by conventional core study and geophysical surveys, including ground …

Application Of Distributed Fiber-Optic Sensing For Pressure Predictions And Multiphase Flow Characterization, Gerald Kelechi Ekechukwu

LSU Doctoral Dissertations

In the oil and gas industry, distributed fiber optics sensing (DFOS) has the potential to revolutionize well and reservoir surveillance applications. Using fiber optic sensors is becoming increasingly common because of its chemically passive and non-magnetic interference properties, the possibility of flexible installations that could be behind the casing, on the tubing, or run on wireline, as well as the potential for densely distributed measurements along the entire length of the fiber. The main objectives of my research are to develop and demonstrate novel signal processing and machine learning computational techniques and workflows on DFOS data for a variety of …

Laboratory Evaluation Of A Novel Self-Healable Polymer Gel For Co2 Leakage Remediation During Co2 Storage And Co2 Flooding, Tao Song, Zhanmiao Zhai, Junchen Liu, Yugandhara Eriyagama, Mohamed Ahdaya, Adel Alotibi, Ze Wang, Thomas P. Schuman, Baojun Bai

Chemistry Faculty Research & Creative Works

For CO₂ storage in subsurface reservoirs, one of the most crucial requirements is the ability to remediate the leakage caused by the natural fractures or newly generated fractures due to the increasing pore pressure associated with CO₂ injection. For CO₂ Enhanced Oil Recovery (EOR), high conductivity features such as fractures and void space conduits can severely restrict the CO₂ sweep efficiency. Polymer gels have been developed to plug the leakage and improve the sweep efficiency. This work evaluated a CO₂ resistant branched self-healable preformed particle gel (CO₂-BRPPG) for CO₂ plugging purpose. This …

Fabrications And Applications Of Micro/Nanofluidics In Oil And Gas Recovery: A Comprehensive Review, Junchen Liu, Yandong Zhang, Mingzhen Wei, Xiaoming He, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Understanding fluid flow characteristics in porous medium, which determines the development of oil and gas oilfields, has been a significant research subject for decades. Although using core samples is still essential, micro/nanofluidics have been attracting increasing attention in oil recovery fields since it offers direct visualization and quantification of fluid flow at the pore level. This work provides the latest techniques and development history of micro/nanofluidics in oil and gas recovery by summarizing and discussing the fabrication methods, materials and corresponding applications. Compared with other reviews of micro/nanofluidics, this comprehensive review is in the perspective of solving specific issues in …

Comprehensive Review Of Polymer And Polymer Gel Treatments For Natural Gas-Related Conformance Control, Ali Al Brahim, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Conformance problems often exist in natural gas-related activities, resulting in excessive water production from natural gas production wells and/or excessive natural gas production from oil production wells. Several mechanical and chemical solutions were reported in the literature to mitigate the conformance problems. Among the chemical solutions, two classes of materials, namely polymer gels and water-soluble polymers, have been mostly reported. These systems have been mainly reviewed in several studies for their applications as water shutoff treatments for oil production wells. Natural gas production wells exhibit different characteristics and have different properties which could impact the performance of the chemical solutions. …

High-Octane Gasoline Production Processes Using Catalysts Containing Platinum, Dilnoza Mauletbayevna Ametova, Duysenbay Xojabayevich Abdikamalov, Edil Abilov

Karakalpak Scientific Journal

The catalytic reforming process is designed to increase the detonation resistance of gasolines and to obtain individual aromatic hydrocarbons, mainly benzene, toluene, xylenes - petrochemical feedstocks. It is important to obtain a cheap hydrogen-containing gas in the process for use in other hydrocatalytic processes. The importance of catalytic reforming processes in oil refining increased significantly in the 1990s. due to the need to produce unleaded high-octane gasoline

Application Of Gravity Data For Hydrocarbon Exploration Using Machine Learning Assisted Workflow, Oluwafemi Temidayo Alaofin

LSU Master's Theses

Gravity survey has played an essential role in many geoscience fields ever since it was conducted, especially as an early screening tool for subsurface hydrocarbon exploration. With continued improvement in data processing techniques and gravity survey accuracy, in-depth gravity anomaly studies, such as characterization of Bouguer and isostatic residual anomalies, have the potential to delineate prolific regional structures and hydrocarbon basins. In this study, we focus on developing a cost-effective, quick, and computationally efficient screening tool for hydrocarbon exploration using gravity data employing machine learning techniques. Since land-based gravity surveys are often expensive and difficult to obtain in remote places, …

Application Of Artificial Intelligence For Co2 Storage In Saline Aquifer (Smart Proxy For Snap-Shot In Time), Marwan Mohammed Alnuaimi

Graduate Theses, Dissertations, and Problem Reports (ETD)

In recent years, artificial intelligence (AI) and machine learning (ML) technology have grown in popularity. Smart Proxy Models (SPM) are AI/ML based data-driven models which have proven to be quite crucial in petroleum engineering domain with abundant data, or operations in which large surface/ subsurface volume of data is generated. Climate change mitigation is one application of such technology to simulate and monitor CO2 injection into underground formations.

The goal of the SPM developed in this study is to replicate the results (in terms of pressure and saturation outputs) of the numerical reservoir simulation model (CMG) for CO2 injection into …

A Workflow For Unconventional Reservoirs Optimization Using Supervised Machine Learning In Conjunction With Orthorhombic Elasticity Modeling, Aymen Ab Ali Alhemdi

Graduate Theses, Dissertations, and Problem Reports (ETD)

Due to the anisotropy and heterogeneous nature of unconventional reservoirs like shale, a comprehensive parametric study to optimize hydraulic fracture treatment for such reservoirs is a tough challenge, especially when natural fractures are present. Most of the current frac simulators do not consider the anisotropy of rock elasticity in the shales. Besides, using the fracture simulation linked with reservoir simulation for the parametric study to understand the impact of multiple different design parameters on fracture propagation and production is time expensive and low efficient. The study proposes a workflow including a new orthorhombic (OB) rock algorithm to interpret geomechanical properties …

Hydrocarbon Pay Zone Prediction Using Ai Neural Network Modeling., Darren D. Guedon

Graduate Theses, Dissertations, and Problem Reports (ETD)

This paper captures the ability of AI neural network technology to analyze petrophysical datasets for pattern recognition and accurate prediction of the pay zone of a vertical well from the Santa Fe field in Kansas.

During this project, data from 10 completed wells in the Santa Fe field were gathered, resulting in a dataset with 25,580 records, ten predictors (logs data), and a single binary output (Yes or No) to identify the availability of Hydrocarbon over a half feet depth segment in the well. Several models composed of different predictors combinations were also tested to determine how impactful some logs …

The Kanarra Fold-Thrust System -- The Leading Edge Of The Sevier Fold-Thrust Belt, Southwest Utah, William Joseph Michael Chandonia

Doctoral Dissertations

“The Jurassic to Eocene Sevier fold-thrust belt is the subject of continued scientific curiosity in tectonics, stratigraphy, and industry. Understanding its development in southwest Utah is hindered in part due to the multiple origins proposed for the Kanarra anticline, a major leading edge structure -- a drag fold along the Hurricane fault, Laramide monocline, Sevier fault propagation fold, or a combination of these -- which have confused its tectonic significance and regional context. This confusion results from the structural complexity of its exposed eastern limb, as well as displacement and burial of its crest and western limb beneath Neogene sediments …

Scale Model Equations And Optimization For Annular Flow Of Non-Newtonian Fluids Between Eccentric And Rotating Cylinders, Wei Zhang, Pooya Khodaparast, Amin Mehrabian Dr., Amir Shojaei

Progress in Scale Modeling, an International Journal

A broad range of engineering applications involves helical flow of non-Newtonian fluids between two eccentric cylinders. These applications often require estimation of the frictional pressure losses along the axes of the cylinders. Laboratory flow loops are commonly used to study the flow characteristics at smaller scales of investigation. This study uses the laws of similarity and dimensional analysis to obtain a set of scaling equations between the laboratory and prototype scales of the described annular flow. These equations are derived for four types of fluid rheology including Newtonian, power-law, Bingham-plastic, and yield power-law.

Results are expressed through a set of …

Systematic Evaluation Of A Novel Self-Healing Poly(Acrylamide-Co-Vinyl Acetate)/Alginate Polymer Gel For Fluid Flow Control In High Temperature And High Salinity Reservoirs, Jingyang Pu, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preferential fluid flow often occurs when water and CO₂ is injected into mature oilfields, sig-nificantly reducing their injection efficiency. Particle gels have been evaluated and applied to control the short circulation problems. This study systematically investigated a novel poly(acrylamide-co-vinyl acetate)/alginate-based interpenetrated gel system (Alg-IPNG) which is designed to control the preferential fluid flow problems in high-temperature reservoirs. Chromium acetate was incorporated into the gel system to provide the delayed crosslinking feature of the particle gels. The alginate polymer system can also take advantage of the Ca²⁺ ions in the formation water, which exist in most reservoirs, to reinforce …

Understanding The Plugging Performance Of Hpam-Cr (Iii) Polymer Gel For Co2 Conformance Control, Xindi Sun, Baojun Bai, Ali Khayoon Alhuraishawy, Daoyi Zhu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

With the demand for conformance control in carbon dioxide (CO₂) flooding fields, hydrolyzed polyacrylamide-chromium [HPAM-Cr (III)] polymer gel has been applied in fields for CO₂ conformance control. However, the field application results are mixed with success and failure. This paper is intended to understand the HPAM-Cr (III) polymer gel plugging performance in CO₂ flooding reservoirs through laboratory experiments and numerical analysis. We conducted core flooding tests to understand how the cycles of CO₂ and water affect the HPAM-Cr (III) polymer gel plugging efficiency to CO₂ and water during a water-alternating-gas (WAG) process. Berea Sandstone …