Petroleum Engineering Commons^™

Geophysical Characteristics Of Kuan Kreng Peat Swamp Forest At Thale Noi Area, Theethach Phiranram

Chulalongkorn University Theses and Dissertations (Chula ETD)

Peatlands, as an important carbon sink, store a large amount of atmospheric carbon. However, peatlands are vulnerable to environmental alteration due to anthropogenic and natural processes. While peatlands are degraded, carbon dioxide emissions arise. The Kuan Kreng peat swamp forest is the second largest peatland in Thailand and is in coastal wetland serving for carbon stock in the subsurface. To assess carbon stock in peatland, the thickness and distribution of the peat layer are necessary. This study determines physical and chemical characteristics of the peatlands in the coastal wetland, southern Thailand by conventional core study and geophysical surveys, including ground …

Application Of Gravity Data For Hydrocarbon Exploration Using Machine Learning Assisted Workflow, Oluwafemi Temidayo Alaofin

LSU Master's Theses

Gravity survey has played an essential role in many geoscience fields ever since it was conducted, especially as an early screening tool for subsurface hydrocarbon exploration. With continued improvement in data processing techniques and gravity survey accuracy, in-depth gravity anomaly studies, such as characterization of Bouguer and isostatic residual anomalies, have the potential to delineate prolific regional structures and hydrocarbon basins. In this study, we focus on developing a cost-effective, quick, and computationally efficient screening tool for hydrocarbon exploration using gravity data employing machine learning techniques. Since land-based gravity surveys are often expensive and difficult to obtain in remote places, …

Application Of Artificial Intelligence For Co2 Storage In Saline Aquifer (Smart Proxy For Snap-Shot In Time), Marwan Mohammed Alnuaimi

Graduate Theses, Dissertations, and Problem Reports (ETD)

In recent years, artificial intelligence (AI) and machine learning (ML) technology have grown in popularity. Smart Proxy Models (SPM) are AI/ML based data-driven models which have proven to be quite crucial in petroleum engineering domain with abundant data, or operations in which large surface/ subsurface volume of data is generated. Climate change mitigation is one application of such technology to simulate and monitor CO2 injection into underground formations.

The goal of the SPM developed in this study is to replicate the results (in terms of pressure and saturation outputs) of the numerical reservoir simulation model (CMG) for CO2 injection into …

The Kanarra Fold-Thrust System -- The Leading Edge Of The Sevier Fold-Thrust Belt, Southwest Utah, William Joseph Michael Chandonia

Doctoral Dissertations

“The Jurassic to Eocene Sevier fold-thrust belt is the subject of continued scientific curiosity in tectonics, stratigraphy, and industry. Understanding its development in southwest Utah is hindered in part due to the multiple origins proposed for the Kanarra anticline, a major leading edge structure -- a drag fold along the Hurricane fault, Laramide monocline, Sevier fault propagation fold, or a combination of these -- which have confused its tectonic significance and regional context. This confusion results from the structural complexity of its exposed eastern limb, as well as displacement and burial of its crest and western limb beneath Neogene sediments …

Understanding The Plugging Performance Of Hpam-Cr (Iii) Polymer Gel For Co2 Conformance Control, Xindi Sun, Baojun Bai, Ali Khayoon Alhuraishawy, Daoyi Zhu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

With the demand for conformance control in carbon dioxide (CO₂) flooding fields, hydrolyzed polyacrylamide-chromium [HPAM-Cr (III)] polymer gel has been applied in fields for CO₂ conformance control. However, the field application results are mixed with success and failure. This paper is intended to understand the HPAM-Cr (III) polymer gel plugging performance in CO₂ flooding reservoirs through laboratory experiments and numerical analysis. We conducted core flooding tests to understand how the cycles of CO₂ and water affect the HPAM-Cr (III) polymer gel plugging efficiency to CO₂ and water during a water-alternating-gas (WAG) process. Berea Sandstone …

Shale Softening Based On Pore Network And Laboratory Investigations, Di Zhang

Dissertations

This dissertation consists of two major parts: Firstly, experimental investigation of four major shale softening mechanisms and quantifications of structural parameters. Secondly, numerical simulations of nano-scale flow behaviors using the previous experiments determined parameters based on modified pore network modeling.

Hydraulic fracturing is widely applied to economical gas production from shale reservoirs. Still, the gradual swelling of the clay micro/nano-pores due to retained fluid from hydraulic fracturing causes a gradual reduction of gas production. Four different gas-bearing shale samples are investigated to quantify the expected shale swelling due to hydraulic fracturing. These shale samples are subject to heated deionized (DI) …

Characterization And Oil Recovery Enhancement By A Polymeric Nanogel Combined With Surfactant For Sandstone Reservoirs, Mustafa Mohammed Almahfood, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The characterization and enhanced oil recovery mechanisms of a nanosized polymeric cross-linked gel are presented herein. A negatively charged nanogel was synthesized using a typical free radical suspension polymerization process by employing 2-acrylamido 2-methyl propane sulfonic acid monomer. The synthesized nanogel showed a narrow size distribution with one peak pointing to a predominant homogeneous droplet size. The charged nanogels were also able to adsorb at the oil-water interfaces to reduce interfacial tension and stabilize oil-in-water emulsions, which ultimately improved the recovered oil from hydrocarbon reservoirs. In addition, a fixed concentration of negatively charged surfactant (sodium dodecyl sulfate or SDS) was …

Impact Of Rheology Models On Horizontal Well Polymer Flooding In A Heavy Oil Reservoir On Alaska North Slope: A Simulation Study, Jianqiao Leng, Mingzhen Wei, Baojun Bai, Randall S. Seright, Yin Zhang, David Cercone, Samson Ning

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Polymer rheology can have either a positive or a negative effect on polymer flooding performance under varied circumstances. Many researchers have studied the effect of polymer rheology in a vertical well, but no field scale studies have been conducted to investigate whether polymer rheology is beneficial to polymer flooding in heavy oil reservoirs developed by horizontal wells. In this paper, we conducted a numerical simulation study to examine the effect of HPAM polymer rheology on a polymer flooding pilot, which is the first-ever project conducted on a heavy oil reservoir from Alaska North Slope (ANS) developed by horizontal wells. Three …

First Ever Polymer Flood Field Pilot To Enhance The Recovery Of Heavy Oils On Alaska's North Slope Pushing Ahead One Year Later, Abhijit Dandekar, Baojun Bai, John Barnes, Dave Cercone, Jared Ciferno, Reid Edwards, Samson Ning, Walbert Schulpen, Randy Seright, Brent Sheets, Dongmei Wang, Yin Zhang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In June 2018 the team embarked on an ambitious project to address the slow development pace of Alaska's 20+ billion barrels heavy oil resource via the first ever polymer flood pilot. Following the successful commencement of the pilot in August 2018, the field demonstration, supporting laboratory experiments and numerical simulation have steadily progressed. A significant amount of valuable data and lessons learned have been collected and are reported in this paper. The ongoing pilot and the research activities is making headway toward the primary objective of validating the use of polymer flooding for extracting heavy oil in Alaska's challenging environment. …

Relationships Among Mineralogy, Geochemistry, And Oil And Gas Production In The Tuscaloosa Marine Shale, Hayley Roxana Beitel

Masters Theses

"The Tuscaloosa Marine Shale (TMS) is an unconventional shale reservoir located in southeast Louisiana and southwest Mississippi. Limited mineralogical and geochemical data for the TMS have been published. The data that do exist indicate that the formation is heterogeneous. Consequently, previous investigators and oil and gas companies have not managed to effectively link mineralogical and chemical changes to oil and gas production in the TMS. These linkages are critical to establish for future exploration efforts. In this study, we attempt to establish these relationships by gathering all existing mineralogical and chemical data in the TMS, including newly acquired data from …

Stress-State And Injection-Rate Dependent Damage Processes During The Hydraulic Fracturing Of Granite, Gayani Sasendrika Gunarathna

Dissertations

Hydraulic fracturing is a well-stimulation technique that is employed in field applications, such as enhanced geothermal systems (EGS) and shale oil/gas extraction. This research experimentally investigates the effect of the state of stress and injection rate on the hydraulic fracturing processes. In addition, a displacement discontinuity method (DDM) code, FROCK, is used to model the crack initiation and propagation in a granite specimen under hydraulic fracturing conditions. In order to conduct the experimental work, a test setup capable of applying a triaxial state of stress and water pressure inside pre-fabricated flaws cut in prismatic granite specimens is developed. Additionally, the …

Emulsion Stability Of Heavy Oil With Surfactants And Nanoparticles, Zainab Abdulmohsein, Baojun Bai, Parthasakha Neogi

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The recovered crude oil is often in form of an emulsion and the recovery is cut off when water to oil ratio exceeds a certain amount. The emulsions vary from water-in-oil to oil-in-water and the step that follows is to coalesce droplets to get two continuous liquids. Difficulties arise when the oil contains emulsifiers. There are naturally occurring surfactants, or the oil recovered is by enhanced oil recovery techniques which have additives that stabilize the droplets. We have considered below a heavy oil (viscosity 650-750 mPa.s) containing one of the three surfactants: a nonionic surfactant or a cationic surfactant or …

Structural Analysis Of Deformed Caprock Associated With A Salt Shoulder At Gypsum Valley Salt Wall, Paradox Basin, Colorado, Hanah Draper

Open Access Theses & Dissertations

This study documents the style and distribution of deformation present in Triassic-age gypsic and carbonate caprock associated with the Gypsum Valley Salt Wall Salt Shoulder in the Paradox Basin, Colorado in order to determine the mechanism and timing of deformation. Mapping of gypsic and carbonate capstone facies shows that the caprock layering that was generated during formation has been deformed by large-and-small-scale folding and faulting, brecciation, and boudinage. Deformation within the caprock resulted in widely variable orientations along the length of the salt shoulder, that also varies locally in intensity of deformation and with proximity to the passively rising diapir …

An Integrated Wellbore Stability Study To Mitigate Expensive Wellbore Instability Problems While Drilling Into Zubair Shale/Sand Sequence, Southern Iraq, Ahmed Khudhair Abbas

Doctoral Dissertations

”The Zubair Formation is the most prolific reservoir in Iraq, which is comprised of sandstones interbedded with shale sequences. Due to the weak nature of the shale sequence, the instability of a wellbore is one of the most critical challenges that continuously appears during drilling across this formation. Historically, over 90% of wellbore problems in the Zubair Formation were due to wellbore instability. Problems associated with wellbore instability, such as tight hole, shale caving, stuck logging tools along with subsequent fishing, stuck pipe, and sidetracking result in increasing the non-productive time. This non-productive time has cost an enormous amount of …

Extraction And Visualization Of Orientation Data From Virtual Geologic Surfaces With Matlab®, Avery J. Welker, John Patrick Hogan, Andreas Eckert

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

High-resolution visualization of surfaces of geologic interest, at a multitude of scales, using 3D point cloud technologies provides an opportunity to analyze spatial relationships of surfaces using orientation data. We present a MATLAB® script that produces planar geologic attitude data (e.g., strike, dip, and dip-direction data) from 3D datasets (e.g., point clouds, 3D scanning). The method utilizes Cartesian coordinates of triangular planar surfaces and converts them into matrices of conventional geologic attitude data. Spatial relationships among data points can be investigated, using polar tangent diagrams, stereographic analysis, or geologic curvature analysis. We utilize this script to create "synthetic" graphical plots …

A Critical Review Of Using High Viscosity Friction Reducers As Fracturing Fluids For Hydraulic Fracturing Applications, Mohammed Ba Geri, Abdulmohsin Imqam, Ralph E. Flori

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The primary purpose of using traditional friction reducers in stimulation treatments is to overcome the tubular drag while pumping at high flow rates. Hydraulic fracturing is the main technology used to produce hydrocarbon from extremely low permeability rock. Even though slickwater (water fracturing with few chemical additives) used to be one of the most common fracturing fluids, several concerns are still associated with its use, including usage of freshwater, high-cost operation, and environmental issues. Therefore, current practice in hydraulic fracturing is to use alternative fluid systems that are cost effective and have less environmental impact, such as fluids which utilize …

Co2-Eor Mechanisms In Huff-N-Puff Operations In Shale Oil Reservoirs Based On History Matching Results, Dheiaa Alfarge, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Improved Oil Recovery (IOR) techniques in Unconventional Liquids Rich Reservoirs (ULR) are still a new concept because there is no commercial project for any IOR technique so far. Carbon dioxide (CO₂) based EOR technique has been effectively applied to improve oil recovery in the tight formations of conventional reservoirs. Extending this approach to unconventional formations has been extensively investigated over the last decade because CO₂ has unique properties which make it the first option of EOR methods to be tried. However, the applications and mechanisms for CO2-EOR in unconventional reservoirs would not necessarily be the same as …

Testing And Evaluation Of Shale Stability For Zubair Shale Formation, Ahmed K. Abbas, Ralph E. Flori, Ahmed Al-Anssari, Mortadha Alsaba

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Zubair Formation consists of approximately 55% shale, which causes almost 70% of wellbore problems due to incompatibilities of drilling fluids and shale formations. The most common and effective solution to shale instability is through the design and selection of drilling fluids. Understanding the interaction between drilling fluids and shale has been a challenge due to the complexity of both physical and chemical variations in shale formations. This paper presents some of the important laboratory and well-site testing techniques that are often used by mud engineers for characterizing and remediating drilling fluids and shale interaction. Well-preserved shale samples were analyzed to …

An Integrated Method For Forecasting Well Deliverability In Gas Condensate Reservoirs With Bottom Aquifer Drive, Abdulaziz Ellafi, Ralph E. Flori, Shari Dunn-Norman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gas condensate reservoirs constitute a significant portion of global hydrocarbon reserves. In these reservoirs, liquids develop in the pore space once bottomhole pressure falls below dew point. This results in the formation of a liquid bank near the wellbore region which decreases gas mobility, which then reduces gas inflow. In such complex reservoirs, it is important to correctly describe PVT impacts, adjustments to well test analysis and inflow performance, and then combine all effects in the reservoir analysis. The literature contains many references to individual adjustments of PVT analysis, well testing, or inflow performance for gas condensate reservoirs, but few …

Miscible Gases Based Eor In Unconventional Liquids Rich Reservoirs: What We Can Learn, Dheiaa Alfarge, Mortadha Alsaba, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Over the last decade, Unconventional Liquids Rich Reservoirs (ULR) have become the main target for oil and gas investors as conventional formations started to deplete and diminish in numbers. These unconventional plays have a huge oil reserve; however, the primary oil recovery factor is predicted to be less than 10%. Unconventional Improved Oil Recovery (UIOR) techniques are still a new concept in the oil industry since there is no commercial project reported for any IOR technique yet. Miscible gas based EOR technique might be the most potential strategy to improve oil recovery in such complex plays. In this study, a …

New Insights Of Low Salinity Water Flooding In Low Permeability-Low Porosity Clay Rich Sandstone Reservoir, Ali K. Alhuraishawy, Baojun Bai, Mingzhen Wei, Waleed H. Al-Bazzaz

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

One of the EOR technologies is low-salinity water flooding (LSWF) is an EOR method that operates at a lower cost than other EOR methods, which makes it a preferred area of interest for oil industry economists, who continue to call for EOR costs to come down. The aim is to minimize the possible cost to recover as much oil as possible. The performance of low salinity waterflooding in decreasing residual oil saturation in low permeability-porosity clay-rich sandstone reservoir. Porosity test, core flooding test, XRD and scanning electron microscopy (SEM) tests were achieved in this study. Salinity effect on the porosity, …

Application Of Integrated Reservoir Geomechanics For Well Planning Of High-Angled Wells In A Mature Oil Field, Ahmed K. Abbas, Ralph E. Flori, Yousif M.B. Al-Asadi, Mortadha Alsaba, Nasser A. Al-Hamad

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Zubair oil reservoir has a significant potential to contribute to the petroleum supply in Iraq. Drilling highly deviated wells is a commonly used approach to enhance the production in mature fields. Drilling these wells in the Zubair Formation has been a challenge due to severe wellbore instability issues. This study presents how integrated reservoir geomechanics was used for efficient well planning and safe drilling of nearly horizontal wells (75° Inclination) through Zubair depleted sandstone oil reservoir. In this study, an integrated workflow was implemented mainly to build a geomechanical model using offset well data. The in-situ principal stresses and their …

Learning From Experience: An Automatic Ph Neutralization System Using Hybrid Fuzzy System And Neural Network, Ethar H.K. Alkamil, Seaar Al-Dabooni, Ahmed K. Abbas, Ralph Flori, Donald C. Wunsch

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In oil and gas industry, the pH level is one of the most important indicators of mud contamination while drilling. Although the process has simple components, the pH neutralization process is complicated in the mud circulation system. This difficulty is due to the high nonlinearity of the process. In this paper, the fuzzy neural network (FNN) is integrated to the fuzzy logic controller (FLC) to create a system which identifies pH fluctuation into a drilling mud system, assesses and signals its severity. And then, it automatically actuates a chemical treating fluids valve (CTFV), such as Caustic Soda (CS), for neutralizing …

Using Managed Pressure Drilling To Reduce Stuck Pipe Problem, Ethar H.K. Alkamil, Husam R. Abbood, Ralph E. Flori, George Medley, Sagar Nauduri, Mortadha Alsaba

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Differences between mud pressure in a wellbore and pore pressure in high permeability rocks can lead to differential sticking, particularly when drilling deviated wells and encountering mud losses. Several solutions, all challenging, can be used to address this problem, where the conventional mitigation method of managing the mud weight (MW) is often used. However, managed pressure drilling (MPD) offers a promising solution with a positive risk-adjusted cost and other benefits. Wells in the E oilfield in southern Iraq are typically drilled overbalanced and therefore often experience a high percentage of non-productive time (NPT) due to differential sticking. This study evaluates …

A Novel Ultra-Low Interfacial Tension Nanofluid For Enhanced Oil Recovery In Super-Low Permeability Reservoirs, Derong Xu, Baojun Bai, Ziyu Meng, Qiong Zhou, Zhe Li, Yao Lu, Hairong Wu, Jirui Hou, Wanli Kang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The exploration and development of super-low permeability reservoirs have become a global focus in recent years. However, conventional flooding systems commonly face problems of high injection pressure and poor displacement efficiency in super-low permeability reservoirs. Thus, it is imperative to find new flooding agents that tackle such problems. In this study, a novel ultra-low interfacial tension (IFT) nanofluid was formulated, consisting of surfactants to achieve ultra-low IFT and silica nanoparticles to reduce injection pressure. The compatibility test between the surfactants and silica nanoparticles in 10,000 mg/L NaCl solution at 90 °C was conducted to ensure their adaption to harsh reservoir …

Advanced Ion Management To Improve Oil Recovery In Oil-Wet Carbonate-Sandstone Composite Reservoirs, Ali K. Alhuraishawy, Baojun Bai, Mingzhen Wei, Waleed H. Al-Bazzaz

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Waterflooding with different ionic composition called advanced ion management which play a role with ionic composition of injected water to enhance the oil production. In the last decade, many studies pointed out that the composition of injected water could changes rock wettability during waterflooding. The main purpose of this study is to evaluate the effects of SO4 and low salinity water on improving oil recovery in oil-wet carbonate reservoirs. Sulfate ion concentration, low salinity water, rock composition, porosity, and permeability were examined using a designed model. Typical seawater, increase SO₄, two and three times in the seawater, and …

Conical Folds -- An Artifact Of Using Simple Geometric Shapes To Describe A Complex Geologic Structure, Avery Joseph Welker

Masters Theses

"Accurate representation of the 3D shapes of natural folds is essential to characterization of the dynamic models for fold formation. Geometrical analysis of folds commonly relies upon analyzing patterns defined by the variation in the orientation of poles to planar surfaces deformed by a shortening event when plotted using graphical calculators (e.g., stereogram, polar tangent diagrams) to interpret the shape of folds. Stereograms for which orientation data define small circles are classified as non-cylindrical regular folds and are interpreted as "conical folds," where the shape of the fold is represented by a cone that terminates at a point. Utilizing similar …

Wellbore Stability Evaluation For Mishrif Formation, Ethar H.K. Alkamil, Husam R. Abbood, Ralph E. Flori, Andreas Eckert

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

During drilling operations for the E oilfield in the Mishrif formation in southern Iraq, stuck pipe has been identified as a significant geomechanical problem for several wells. In this study, a 1-D mechanical earth model (MEM) of the Mishrif formation is compiled based on its state of stress and rock strength parameters and is utilized to assess the contribution of borehole collapse leading to the stuck pipe problems. The MEM model is based on the principal in situ stresses and their orientation obtained from wireline logs measurements, measuring while drilling (MWD), and leak off test (LOT). Rock strength properties are …

Deformation Processes At The Leading Edge Of The Sevier Fold And Thrust Belt, Southwest Utah, William Joseph Michael Chandonia

Masters Theses

"Deformation processes leading to formation and abandonment of 'triangle zones' along the leading edge of the Sevier fold and thrust belt are investigated near Kanarraville, Utah through construction of a detailed geologic map and cross-section along Spring Creek. Here the eastern limb of the Kanarra fold, a Sevier structure, is well exposed along the Hurricane Cliffs due to uplift and erosion of the footwall of the Hurricane Fault. The east-verging Kanarra fold changes from upright to overturned within Spring Creek. Within the fold limb, parasitic folds, minor thrust faults, and duplex structures result in local tectonic overthickening of units and …

Evaluation Of Swelling And Re-Swelling Of Preformed Particle Gels (Ppg) When Exposed To Co₂, Sujay Suresh

Masters Theses

"Long term water/gas flooding induces high permeability channels in reservoirs. Reservoir heterogeneity becomes the most prominent challenge faced in mature oil fields. Gel treatment has been a proven solution to counter the problem of reservoir heterogeneity, to provide in-depth treatment and improve the sweep efficiency for reservoirs. Preformed particle gels (PPGs) were developed as an alternative to in-situ gels as they preferentially penetrate and shutoff high permeability zones, leaving the low permeability zones undamaged. These gels have been predominantly used in water flooding projects, but have not been employed in carbon dioxide (CO₂) flooding projects. CO₂ Resistant …