Other Chemical Engineering Commons^™

High-Surface-Area Ficus Leaf-Extracted Cuo-Zno-Nio Ternary Nanocomposites For Rapid Adsorption-Assisted Uv-A Degradation Of Direct Blue 15, Kafa’A H. Ali, Mohammed A. Atiya, Ahmed K. Hassan

Karbala International Journal of Modern Science

Direct Blue 15 (DB15) is a long-lasting synthetic dye that pollutes water and is difficult to remove during wastewater treatment. Conventional treatments fail to remove DB15 adequately due to rapid electron-hole recombination, which necessitates photocatalysts with reduced recombination rates for effective dye removal. The study aims to synthesize and evaluate a CuO-ZnO-NiO ternary system as an integrated adsorption and UV-A photocatalysis platform for DB15 removal. Ficus leaf-extracted CuO-ZnO-NiO nanocomposites with four Cu:Zn:Ni ratios (1:1:1, 1:1:2, 1:2:1, 2:1:1) were prepared by co-precipitation, followed by extensive chemical and physical characterization and dye-removal performance measurements. The CuO-ZnO-NiO nanocomposite exhibited hexagonal zinc oxide, cubic …

A Comparative Study Of Tin Electrorefining In Molten Licl–Kcl–Cacl₂: Experimental Two-Electrode Current Control And Theoretical Three-Electrode Potential Control, Bryant Johnson, George Ankrah, Ander Fuller, Devin Rappleye

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

Molten salt electrorefining is a mature technology for metal recovery, yet conventional current‑controlled, two‑electrode operation provides limited electrochemical selectivity and restricted insight into electrode‑specific behavior. In this work, a simplified model is developed to compare current‑controlled two‑electrode electrorefining data with a potential‑controlled three‑electrode electrorefining simulation using tin in molten LiCl–KCl–CaCl₂ as a surrogate for plutonium processing. The model examines anodic and cathodic limitations under fixed‑potential operation and evaluates implications for selectivity, efficiency, and runtime relative to experimentally demonstrated two‑electrode performance. Results indicate that independent potential control enables operation closer to thermodynamic selectivity limits, with the potential to suppress impurity oxidation …

Computer-Aided Molecular Design To Identify More Environmentally Friendly Pfas, Melvin M. Keita

Williams Honors College, Honors Research Projects

The goal of this project is to inversely design alternatives to per- and polyfluoroalkyl substances (PFAS) using Computer-Aided Molecular Design (CAMD). PFAS, also described as “forever chemicals”, have been used in industry and consumer products since the 1940s. PFAS can be found in drinking water, food, food packaging, waste sites, and other sources. Exposure to different PFAS can lead to increased risks of some cancers, immune effects, and reproductive effects. Pulling from existing data, this project will use quantitative structure-property relationships (QSPRs) to design PFAS alternatives that possess optimal properties to prevent adsorption into drinking water and other potential sources …

Binary Solid/Liquid Equilibrium Of Mixtures Of Thermally Robust Salts And Molecular Compounds For Use As Heat Transfer Fluids, Jared Ridge Mathews

Honors Theses

Fossil fuels, contributors to climate change that may bear catastrophic consequences, power the entire world. The human species is almost entirely dependent on fossil fuels for energy, but other sources of renewable and environmentally friendly energy must be developed. Concentrated solar power (CSP) is a promising source of renewable energy with hampered potential—better heat transfer fluids (HTFs) are needed for it to be economically feasible. Currently, the HTFs in industrial use are predominantly either synthetic oils or nitrate-based molten salts. Synthetic oils are only stable up to 400 °C, and molten salts often have high melting temperatures, making them prone …

A Comparison Of Unconventional Microwave And Ultrasound-Assisted Extraction Methods Used For Flavonoids, Istiqomah Rahmawati, Daffa Hafiziaulhaq Azizi, Jihan Nafila Wibowo, Muhammad Reza, Boy Arief Fachri, Bekti Palupi, Meta Fitri Rizkiana, Helda Wika Amini, Ifan Ramadana, Felix Arie Setiawan

Makara Journal of Science

Cocoa pods (Theobroma cacao L.) are a rich source of flavonoids, which are natural antioxidants known for their health benefits. This study investigated the use of microwave-assisted extraction (MAE) and ultrasound-assisted ex-traction (UAE) to extract the maximum flavonoids and antioxidants from cocoa pods. MAE and UAE are efficient and sustainable methods for extracting bioactive compounds like flavonoids and antioxidants from cocoa pods, offer-ing faster extraction, reduced solvent use, and better compound preservation compared to conventional methods. These technologies unlock the untapped potential of cocoa pods for applications in food, cosmetics, and pharmaceuti-cals. The effects of extraction time (2–10 min), microwave …

Effect Of Pre-Adsorbed Species On High-Pressure Adsorption Of Methane In Zeolite 5a Using Grand Canonical Monte Carlo (Gcmc) Simulations, Kanhamardi Lao, Brooks D. Rabideau

Shelby Hall Graduate Research Forum Posters

Natural gas upgrading, which removes impurities from methane (CH4), is essential for industrial applications, including liquefied natural gas (LNG) production and power generation, as well as for residential use. Removing non-hydrocarbon impurities such as carbon dioxide (CO2), nitrogen (N2), and water vapor (H2O), among others, along with separating heavier hydrocarbon gases from raw natural gas, is required to achieve high- purity methane and prevent pipeline corrosion. Zeolite 5A is a microporous aluminosilicate material with a pore size of approximately 5 Å, containing sodium and calcium cations that balance the framework’s negative charge. Its structure offers high thermal stability and a …

Effects Of Chain Length, Saturation, And Bases On Saponification, Sarah Fenik

Williams Honors College, Honors Research Projects

This project will analyze the effects of chain length and saturation of fatty acids on saponification processes, as well as the effects of the base used in the reaction. Stearic acid, lauric acid, and oleic acid will be used for the fatty acid comparisons, and sodium hydroxide and potassium hydroxide will be used for the base comparisons. Stearic acid is considered a long chain fatty acid, while lauric acid is considered a short chain fatty acid. Oleic acid is a monounsaturated fatty acid. Five soap products are be made: sodium stearate, sodium laurate, sodium oleate, potassium stearate, and potassium oleate. …

Development, Synthesis And Characterization Of Advanced Low- Cobalt And High-Nickel Cathode Materials For Lithium-Ion Batteries, Arjun Patel

Theses and Dissertations

This dissertation focuses on the improvement of structural and electrochemical stability of active materials for lithium-ion batteries. It explores the modification strategies to mitigate the issues related to Ni-rich cathode materials, along with the continuous production of cathode precursors using a slug flow reactor to improve the quality of the product.

The First part of the dissertation examines the effect of substitution of cobalt with aluminum and iron on the electrochemical stability of Ni-rich lithium nickel cobalt manganese oxide (NCM) materials. This study investigates how Al and Fe doping work and how they impact the performance and stability of these …

Characterization Of Aromatic Stationary Phases For Uses In High Performance Liquid Chromatography, Anastasia Davis

Honors Theses

High Performance Liquid Chromatography (HPLC) is an analytical chemist technique used to separate a sample into its components to characterize and study a specific molecule or compound. Traditionally, High-Performance Liquid Chromatography in different industries, such as the environmental and pharmaceutical fields, uses stationary phases that are already well characterized, such as the C18 stationary phase for separation. However, aromatic stationary phases have recently been produced, which have phenyl groups bonded to the interior surface of the column. Still, they have not been well characterized because of how modern they are. This project characterized several aromatic stationary phases (Biphenyl, pentafluorophenyl, and …

Synthesis And Analysis Of A Novel Magnetic Surfactant, Donovan Turpin

Honors Theses

Researchers in the University of Mississippi Chemical Engineering Department have suggested that chelation of a large magnetic transition metal, namely dysprosium, into the large polar head group of a surfactant could result in a magnetic surfactant. This project was aimed at synthesizing a surfactant with a large enough head group and negative charge (specifically EDTA) to support this ion and demonstrating that the chelation process was successful. If so, the molecule would ideally be capable of forming micelles which could extract oily substances from water using a strong magnet—possibly applicable to environmental crises like oil spills.

NMR analysis has suggested, …

Model To Demonstrate Effects Of Mass Transfer And Applied Current In An Electrolytic Cell, George Ankrah

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

This study investigates the relationship between applied current and resulting cell potential in an electrolytic system, considering the transport of electroactive species. By applying Michael Faraday's laws of electrolysis and the Nernst-Planck equation, the behavior of electroactive species in diffusion-controlled systems with and without stirring is modeled. The plots demonstrate how stirring enhances ion transport and establishes a stable Nernst diffusion layer, affecting the kinetics of electrochemical reactions. Understanding these dynamics is crucial for optimizing electrolysis processes.

Review Of Cyclic Voltammetry Measurements For Uranium In Flinak Molten Salt, Jackson Ivory

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

The electrochemical behavior of uranium FLiNaK molten salts is explored, focusing on cyclic voltammetry (CV) as a powerful tool for redox characterization and diffusion studies. Through a comprehensive review of recent research, the study highlights the significance of CV in understanding electrode kinetics, material compatibility, and process optimization in molten salt environments. The findings underscore the potential of FLiNaK molten salt reactors in advancing nuclear energy technologies, fuel processing, and waste management strategies. Collaborative interdisciplinary efforts are emphasized to address challenges and accelerate innovation in electrochemical methods for nuclear applications.

Model Of The Effect Of Voltage On Contact Angle In An Electrolytic Cell Reaction, Aaron Essilfie

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

This paper investigates the hypothesis that the contact angle at the meniscus of an electrode-electrolyte can be altered during a redox reaction through the coupled understanding of electrowetting and capillarity rise. Recent studies in electrowetting have focused on dielectric surfaces but research on contact angle at the electrode-electrolyte surface is lacking. The study employs a basic electrolytic cell. By applying principles of electrowetting and capillary rise the research aims to understand the relationship between applied voltage and contact angle, to advancements in electrochemistry and microfluidics.

Modeling Sex-Specific Changes In Myocardial Fibrosis, Grace Martin

Chemical Engineering Undergraduate Honors Theses

Heart disease the leading cause of death for both men and women in the United States. Cardiac fibrosis, or accumulation of extracellular matrix proteins in the heart, can occur after a heart attack and increase the risk for further complications. Current treatments for heart disease do not include extracellular matrix regulators, partly due to the complicated signaling network responsible for the production of these proteins. By using a computational model of the signaling network in cardia fibroblasts, the relationship between particular molecules and downstream extracellular matrix production can be examined.

Biological sex is an important factor for cardiac health and …

Molecular Understanding And Design Of Deep Eutectic Solvents And Proteins Using Computer Simulations And Machine Learning, Usman Lame Abbas

Theses and Dissertations--Chemical and Materials Engineering

Hydrophobic deep eutectic solvents (DESs) have emerged as excellent extractants. A major challenge is the lack of an efficient tool to discover DES candidates. Currently, the search relies heavily on the researchers’ intuition or a trial-and-error process, which leads to a low success rate or bypassing of promising candidates. DES performance depends on the heterogeneous hydrogen bond environment formed by multiple hydrogen bond donors and acceptors. Understanding this heterogeneous hydrogen bond environment can help develop principles for designing high performance DESs for extraction and other separation applications. This work investigates the structure and dynamics of hydrogen bonds in hydrophobic DESs …

Microplate-Like Metal Pyrophosphate Engineered On Ni-Foam Towards Multifunctional Electrode Material For Energy Conversion And Storage, Rishabh Srivastava

Electronic Theses & Dissertations

High clean energy demand, dire need for sustainable development, and low carbon footprints are the few intuitive challenges, leading researchers to aim for research and development for high-performance energy devices. The development of materials used in energy devices is currently focused on enhancing the performance, electronic properties, and durability of devices. Tunning the attributes of transition metals using pyrophosphate (P₂O₇) ligand moieties can be a promising approach to meet the requirements of energy devices such as water electrolyzers and supercapacitors, although such a material’s configuration is rarely exposed for this purpose of study.

Herein, we grow …

Mechanical And Adhesive Properties Of Supramolecular, Mussel-Inspired Hydrogels, Daniel Darby

Theses and Dissertations--Chemical and Materials Engineering

The exceptional mechanical and adhesive properties of mussel byssal threads come from supramolecular interactions of ligands found in the proteins comprising them. Ligands can form hydrophobic interactions, π-π stacking interactions, and hydrogen bonds, but the strongest supramolecular interaction they demonstrate is metal-ligand coordination. Specifically, Histidine (His-) and nitrodopamine (nDOPA) ligands coordinate to metals in a bidentate fashion and take on tris-, bis-, and mono- modalities (3, 2, or 1 ligand per ion, respectively). The distribution of these modalities is controlled by equilibrium thermodynamics. These same ligands can be used as crosslinks in supramolecular hydrogel networks. Supramolecular hydrogel networks are dissipative, …

Phosphorus Release And Recovery From Simulated Ferric Wastewater Sludge, Aseel Alnimer

Theses and Dissertations (Comprehensive)

Phosphorus (P) is a fundamental element necessary for all life forms and a key component in the fertilizer industry. Meanwhile, the excessive load of P to water bodies due to human activities has the potential to promote eutrophication. Wastewater treatment plants remove P either biologically or chemically and produce P rich sludge which could be a potential renewable source for P. At present, commercial technologies exist for P recovery from biological wastewater sludge. However, P recovery from chemical sludge particularly iron(III)-phosphate (Fe-P) sludge generated in chemical P removal plants that use iron(III) salts remains a challenge.

This study explored, in …

Diffusion Of A Salt In An Aqueous Media, Aldaly Pineda Hernandez

Chemical Engineering Undergraduate Honors Theses

Diffusion is defined as the net transfer of a molecule from a high concentration region to a low concentration region. The concept of diffusion is used in a very important process called "desalination." Desalination is a separation process used to reduce the salt content dissolved in brackish water to make it suitable for human consumption, irrigation, and industrial use.

In desalination plants, it is important to monitor the constantly changing salt content of water, partly due to the diffusive effect. The main purpose of this experiment was to study the diffusion of NaCl in water at two NaCl concentrations. The …

Adsorption And Transport Of Colloids At Interface And In Bulk, Jingyun Lee

LSU Doctoral Dissertations

Colloids are suspensions of microscopic insoluble particles dispersed in a continuum phase such as liquid or gas. Colloids are found in our everyday life from food and cosmetic industries to pharmaceutical and biomedical applications. Depending on a global minimum of the free-energy landscape, colloidal suspensions can be classified as two major classes: equilibrium or active colloidal system. This Ph.D dissertation presents strategies to engineer equilibrium self-assembled structures and out-of-equilibrium active matter using various interparticle forces.

First, we introduce the means to promote the equilibrium self-assembled structures driven by adsorption of colloids at interface. Typically, adsorption of colloids at interface is …

Information Architecture For A Chemical Modeling Knowledge Graph, Adam R. Luxon

Theses and Dissertations

Machine learning models for chemical property predictions are high dimension design challenges spanning multiple disciplines. Free and open-source software libraries have streamlined the model implementation process, but the design complexity remains. In order better navigate and understand the machine learning design space, model information needs to be organized and contextualized. In this work, instances of chemical property models and their associated parameters were stored in a Neo4j property graph database. Machine learning model instances were created with permutations of dataset, learning algorithm, molecular featurization, data scaling, data splitting, hyperparameters, and hyperparameter optimization techniques. The resulting graph contains over 83,000 nodes …

Adsorption And Reconfiguration Of Amphiphiles At Silica-Water Interfaces: Role Of Electrostatic Interactions, Van Der Waals Forces And Hydrogen Bonds, Yao Wu

LSU Doctoral Dissertations

The ability to explore and predict metastable structures of hybrid self-assemblies is of central importance for the next generation of advanced materials with novel properties. As compared to their thermodynamically stable forms, the kinetically stabilized materials show improved functionality potentially over their stable counterparts. The self-assembly processes usually originate from weak intermolecular interactions, involving a dynamic competition between attractive and repulsive interactions. These weak forces, including van der Waals (vdW), electrostatic interaction and the hydrogen bonding (H-bonding), can be tuned by external stimuli, e.g., confinement, temperature and ionization, and consequently driving hybrid materials into different configurations. It is challenging to …

Development Of Novel Adsorbent For Industrial Waste Water Treatment, Islam M. Al-Akraa, Hassan M. Shehata Eng, Dalia A. Ali Eng., Hoda A. Elsawy Dr

Chemical Engineering

The main objective of this research project is to perform some experimental procedures to inform the ability of the novel adsorbent used in this project. The chemical modification of the adsorbent is the chemical oxidation of pure powder chitosan using some specific redox pairs which are potassium dichromate and sodium bisulphite. After preparing the modified chitosan, there are some parameters that must be discussed during the adsorption process. The first parameter is the time parameter, showing experimentally the optimum time for adsorption under certain conditions by collecting values of absorbance and concentration of thymol blue adsorbed after the process from …

Design Of Pigments For Use In “Cool” Coatings, Tyler Laughorn

Williams Honors College, Honors Research Projects

This project was focused on the development and testing of several novel pigments that exhibit high NIR-reflectance and therefore show potential for use in “cool” coatings. A “cool” coating will reflect more solar radiation than other standard coatings, and so a coated structure would require less energy to keep cool. Four sets of pigments were synthesized: Co_1-xMg_xCr₂O₄ (teal), Co_0.25Mg_0.75Cr_2-yAl_yO₄ (blue), Ti_1-x-yNi_xSb_yO₂ (yellow), and Cr_2-xFe_xO₃ (black). NIR and TSR values were then measured …

Filtration Apparatus Design For Oil-Water Separation Using Membranes And Sponges, Alec Jerger

Williams Honors College, Honors Research Projects

It can be difficult to separate water and oil emulsions through traditional filtration. Therefore, investigations of filtering using thermo-responsive (TR) polymers, in this case poly(vinyl methyl ether) (PVME), was conducted. It’s hypothesized that below its lower critical solution temperature (LCST), PVME has an affinity for water while oil substances do not. Above the LCST the opposite will be true. To verify this hypothesis, iterations of filtration designs were created to provide optimum control over the parameters to measure flow. The final optimized experimental apparatus was a Chromaflex glass column which was air tight and controlled all parameters besides fluid flow. …

Synthesis Of Graphene Using Plasma Etching And Atmospheric Pressure Annealing: Process And Sensor Development, Andrew Robert Graves

Graduate Theses, Dissertations, and Problem Reports (ETD)

Having been theorized in 1947, it was not until 2004 that graphene was first isolated. In the years since its isolation, graphene has been the subject of intense, world-wide study due to its incredibly diverse array of useful properties. Even though many billions of dollars have been spent on its development, graphene has yet to break out of the laboratory and penetrate mainstream industrial applications markets. This is because graphene faces a ‘grand challenge.’ Simply put, there is currently no method of manufacturing high-quality graphene on the industrial scale. This grand challenge looms particularly large for electronic applications where the …

The Effects Of Temperature On The Yields Of Aliphatic And Aromatic Products From The Supercritical Pyrolysis Of 1-Octene, Elizabeth Anne Hurst

LSU Doctoral Dissertations

Prior to their combustion, fuels for future high-speed aircraft are expected to experience supercritical conditions, leading to the production of polycyclic aromatic hydrocarbons (PAH), precursors to solid carbonaceous deposits, via pyrolytic reactions. These solid deposits can clog fuel-transfer lines, causing unsafe aircraft operation. To prevent the formation of fuel-line deposits, it is critical to understand the reaction pathways that lead to PAH formation in the supercritical fuel pyrolysis environment.

To better understand the role of large 1-alkenes in PAH formation, supercritical pyrolysis experiments with model fuel 1-octene, a representative 1-alkene product from supercritical n-alkane pyrolysis, have been performed. The …

Using Green Emitting Ph-Responsive Nanogels To Report Environmental Changes Within Hydrogels: A Nanoprobe For Versatile Sensing, Mingning Zhu, Dongdong Lu, Shanglin Wu, Qing Lian, Wenkai Wang, L. Andrew Lyon, Weiguang Wang, Paulo Bártolo, Brian R. Saunders

Engineering Faculty Articles and Research

Remotely reporting the local environment within hydrogels using inexpensive laboratory techniques has excellent potential to improve our understanding of the nanometer-scale changes that cause macroscopic swelling or deswelling. Whilst photoluminescence (PL) spectroscopy is a popular method for such studies this approach commonly requires bespoke and time-consuming synthesis to attach fluorophores which may leave toxic residues. A promising and more versatile alternative is to use a pre-formed nanogel probe that contains a donor/acceptor pair and then “dope” that into the gel during gel assembly. Here, we introduce green-emitting methacrylic acid-based nanogel probe particles and use them to report the local environment …

Nanogels And Microgels: From Model Colloids To Applications, Recent Developments, And Future Trends, Mattias Karg, Andrij Pich, Thomas Hellweg, Todd Hoare, L. Andrew Lyon, J. J. Crassous, Daisuke Suzuki, Rustam A. Gumerov, Stefanie Schneider, Igor I. Potemkin, Walter Richtering

Engineering Faculty Articles and Research

Nanogels and microgels are soft, deformable, and penetrable objects with an internal gel-like structure that is swollen by the dispersing solvent. Their softness and the potential to respond to external stimuli like temperature, pressure, pH, ionic strength, and different analytes make them interesting as soft model systems in fundamental research as well as for a broad range of applications, in particular in the field of biological applications. Recent tremendous developments in their synthesis open access to systems with complex architectures and compositions allowing for tailoring microgels with specific properties. At the same time state-of-the-art theoretical and simulation approaches offer deeper …

Novel Adsorbent For Industrial Wastewater Treatment Applications, Islam M. Al-Akraa, Ahmed Y. Zakaria Eng, Dalia A. Ali Eng, Hany A. Elazab Dr, Hoda A. Elsawy Dr

Chemical Engineering

In this study, the hydroxyapatite powder is investigated for both of methylene blue and thymol blue in aqueous solution. The physical and chemical properties of the adsorbent were evaluated systematically using the different techniques including Microsoft Excel programming, linear regression model and also the coefficient of determination. Batch adsorption experiments were conducted to determine the effect of contact time, solution pH, initial dye concentrations, and also the adsorbent dosage on adsorption. The adsorption kinetic parameters confirmed the better fitting of pseudo-second order kinetic model for both of methylene blue and thymol blue. The isotherm data of methylene blue and thymol …