Biochemical and Biomolecular Engineering Commons^™

Elucidating The Properties And Mechanism For Cellulose Dissolution In Tetrabutylphosphonium-Based Ionic Liquids Using High Concentrations Of Water, Brad Crawford

Graduate Theses, Dissertations, and Problem Reports

The structural, transport, and thermodynamic properties related to cellulose dissolution by tetrabutylphosphonium chloride (TBPCl) and tetrabutylphosphonium hydroxide (TBPH)-water mixtures have been calculated via molecular dynamics simulations. For both ionic liquid (IL)-water solutions, water veins begin to form between the TBPs interlocking arms at 80 mol % water, opening a pathway for the diffusion of the anions, cations, and water. The water veins allow for a diffusion regime shift in the concentration region from 80 to 92.5 mol % water, providing a higher probability of solvent interaction with the dissolving cellulose strand. The hydrogen bonding was compared between small and large …

Magnetic Stimulation On The Growth Of The Microalga Nannochloropsis Oculata, Manuella Oliveira

Electronic Thesis and Dissertation Repository

Fossil fuels, our principal sources of energy supply, are non-renewable and research is needed on alternatives that are renewable and potentially more environmentally friendly. Microalgae have been investigated as a future feedstock alternative to petroleum but the technology is still expensive and improvements are needed. Reduction in costs might be achieved by increasing algal biomass and lipid productivity. The lipids can be used to produce biofuels such as biodiesel and biojet fuel. The marine microalga Nannochloropsis oculata grows well and can accumulate high lipid content. In this study, the effects of static magnetic field stimulation (SMF) of 0 (control), 5, …

Designing And Development Of A Photobioreactor For Optimizing The Growth Of Micro Algae And Studying Its Growth Parameters, Sarmila Katuwal

Electronic Theses and Dissertations

This thesis presents the estimated value of materials required to grow 1g of biomass and the analysis of the light intensity with respect to flow path and flow rate. This thesis aims to design the sparger for a flat plate Photobioreactor, study the flow patterns at different flow rate of air flow and check the performance of flat plate PBR by growing the cyanobacteria. The estimated value to produce 1g of biomass (C_44.6H₇O₂₅N_7.68P_0.9S_0.3) was 0.099g of N, 0.493g of C, 0.160 g of Na, 0.026 g of P, …

Understanding Glycoside Hydrolase Processivity For Improved Biomass Conversion, Suvamay Jana

Theses and Dissertations--Chemical and Materials Engineering

In nature, organisms secrete synergistic enzyme cocktails to deconstruct crystalline polysaccharides, such as cellulose and chitin, to soluble sugars. The cocktails consist of multiple classes of processive and non-processive glycoside hydrolases (GH) that aid in substrate accessibility and reduce product inhibition. Processive GHs attach to chain ends and hydrolyze many glycosidic linkages in sequence to produce disaccharide units before dissociation, and as such, are responsible for the majority of hydrolytic bond cleavages. Accordingly, processive GHs are targets for activity improvements towards efficient and economical biomass conversion. However, the mechanism and factors responsible for processivity are still not understood completely at …

Polyhydroxybutyrate Production In A Photobioreactor Using Spirulina Platensis, Adrianna Mika

Electronic Thesis and Dissertation Repository

Biopolymers and other naturally derived chemicals continue to gain attention over petrochemical based products due to the price volatility of crude oil, increasing need to reduce greenhouse gas emissions and public awareness of environmental issues. Cyanobacterium Spirulina (Arthrospira) platensis, a commercially feasible blue-green alga, is able to synthesize poly(3-hydroxybutyrate) (PHB), a biodegradable and biocompatible polymer, as an energy storage product of photosynthesis directly from CO₂. A flat plate photobioreactor (PBR) with LED illumination was designed for the cultivation of S. platensis. Computational fluid dynamics (CFD) software was used to improve airflow uniformity and mixing in the …

Production And Harvest Of Microalgae In Wastewater Raceways With Resource Recycling, Alexander Colin Roberts

Master's Theses

Microalgae can be grown on municipal wastewater media to both treat the wastewater and produce feedstock for algae biofuel production. However the reliability of treatment must be demonstrated, as well as high areal algae productivity on recycled wastewater media and efficient sedimentation harvesting. This processes was studied at pilot scale in the present research.

A pilot facility was operated with nine CO₂-supplemented raceway ponds, each with a 33-m² surface area and a 0.3-m depth, continuously from March 6, 2013 through September 24, 2014. The ponds were operated as three sets of triplicates with two sets continuously fed …

Pyrolysis Based Biorefineries For The Production Of Fermentable Substrates, Luis Carlos Luque-Moreno

Electronic Thesis and Dissertation Repository

Fast pyrolysis is rapid thermal conversion process capable of transforming multiple feedstocks into various energy carriers, specifically pyrolysis oil, bio gas, and bio char. The oil phase is of high value due to its complex mixtures of organic molecules, along with large number of anhydrous carbohydrates, which can be easily transformed into glucose via acid hydrolysis. These carbohydrates can be either biocatalyzed into fuels and chemicals by microorganisms or converted after further treatment steps. However quantities of these carbohydrates in the oil are a function of feedstock composition and process parameters. The research presented in this thesis focuses on producing …

Effect Of Plant Hormones On The Production Of Biomass And Lipid In Microalgae, Malihe Mehdizadeh Allaf

Electronic Thesis and Dissertation Repository

Limited fossil fuel reserves, increasing demand for energy in all parts of the world are some driving forces to look for new sources of transportation fuels. Among different options available, microalgae are currently attracting wide interests as an alternative and renewable fuel source.

Microalgae are single cell photosynthetic organisms that are known for rapid growth and high energy content and as a part of photosynthesis; they produce oil that can be used as a feedstock for biodiesel production. Some algae strains could contain lipid up to 80% of the dry biomass. The amount of lipid production is in direct relation …

Characterization And Quantification Of Monomers, Oligomers, And By-Products From Xylan During Biomass Pretreatment, Ching-Shuan Lau

Graduate Theses and Dissertations

Biomass pretreatment generates inhibitory products, which reduce the overall yield of xylose for ethanol production. Understanding of hemicellulose depolymerization into xylose is essential to identify the pretreatment conditions that maximize xylose formation, but minimize the generation of these inhibitory products, such as formic acid and furfural. Thus, the goal of this project is to understand how dilute acid pretreatment parameters affect hemicellulose depolymerization, maximize xylose concentrations, and minimize by-products formation.

To progress towards this goal, rates and mechanisms of hemicellulose release must be determined. Birchwood xylan was used as the starting material to produce xylose oligomers. The hydrolyzed birchwood xylan …

Optimization Of A Dynamic Hot Water Pretreatment Of Switchgrass Using Catalysis By Carbonation To Maximize Carbochemical Yields, Rohit Tanaji Dhamdere

Graduate Theses and Dissertations

A bio-refinery is a facility that converts renewable bio-resources into value-added chemicals and products. In this context of a bio-refinery, the production of the carbochemicals such as HMF, furfural and organic acids illustrate that multiple products can be produced from a renewable source such as lignocellulosic biomass (switchgrass). Traditionally, carbochemicals such as furfural and HMF are produced using inorganic acids such as H2SO4, HCL, and H3PO4. The use of such acids requires the application of high cost materials of construction such as Hastelloy-C, titanium etc.

The objective of this study is to develop a semi-continuous process for the conversion of …