Biochemical and Biomolecular Engineering Commons^™

Graphene Oxide–Driven In Situ Bismuth Reduction Enables Highly Efficient Electroreduction Of Co2 To Formic Acid, Hao Feng, Bohong Zhang, Jie Huang, Xinhua Liang

Electrical and Computer Engineering Faculty Research & Creative Works

To enable large scale efficient electrochemical CO₂ reduction reaction (CO₂RR) to formic acid (HCOOH), it is important to develop catalysts that can be operated in a wide potential window with good stability. Herein, we successfully synthesized Bi₂O₃ catalyst supported on graphene oxide (GO) and graphene (G) and found that Bi₂O₃/GO catalyst had a better overall performance than Bi₂O₃/G. The Bi₂O₃/GO catalyst demonstrated an outstanding CO₂RR performance with a greater than 90% faradaic efficiency (FE) across a wide applied potential window …

Converting Co2 Into Carbon Nanotubes Via Sequential Co2 Methanation And Methane Pyrolysis, Kaiying Wang, Hao Feng, Ahmad Helaley, Xiaoqing He, Bohong Zhang, Jie Huang, Xinhua Liang

Electrical and Computer Engineering Faculty Research & Creative Works

This study presents a sequential thermochemical catalytic process for converting CO₂ into carbon nanotubes (CNTs), achieving nearly 99% overall CO₂ conversion and solid carbon yields of up to 49% in a single pass. The overall transformation is divided into two thermodynamically favorable steps: (1) low-temperature CO₂ methanation to CH₄ over a sol-gel-prepared Ni87Ce_6.5Zr_6.5-SG catalyst, which achieved >95% CO₂ conversion at 250 °C in a single pass, and (2) subsequent methane pyrolysis to CNTs and H₂ over a Ni@Al₂O₃-IE core-shell catalyst, which showed improved stability and carbon …

C. Difficile Detection Method For First Responder Glove Application, Alli N. Senedak

Williams Honors College, Honors Research Projects

Clostridioides Difficile (C. diff) is a Anaerobic Gram-positive bacillus that is capable of spore formation, making it difficult to control its spread and duration in clinical environments. This phenomenon can provide danger to first responders, healthcare workers, and patients. The goal of this project is to create a biosensor capable of detecting C. diff in a clinical setting that can be applied to a glove apparatus. The project will involve the use of C. diff aptamers activated on the surface of an electrode. Once surface activation has been verified via surface analysis, the electrodes will be exposed to C. diff …

Development And Experimental Validation Of A Non-Invasive Blood Group Detection System, Nurath K. Nurudini

Tanzania Journal of Engineering and Technology (TJET)

An individual's blood group consists of red blood cell antigens whose composition is determined by protein presence, antigen structure, and gene series. Persons aged above six months have significant anti-A and/or anti-B in their serum. During transplantation and transfusion, ABO blood group identification is the most essential factor. The conventional method involves drawing blood samples from patients, and the blood group is determined based on the antigen-antibody reaction. This method consists of adding chemical reagents. However, this requires time of operation, and throughput analysis is high, and the process is also challenging to interpret. Accurate and rapid identification of blood …

Adaptive Noise Estimation And Denoising With Deep Learning For Nmr Spectroscopy, Naveen Asokan

McKelvey School of Engineering Graduate Student Theses & Dissertations

Nuclear Magnetic Resonance (NMR) spectroscopy is a powerful analytical technique widely used for molecular structure elucidation in chemistry, biology, and medicine. However, spectral accuracy is often degraded by noise—particularly in low acquisition time settings—resulting in reduced resolution and obscured chemical features. While traditional noise reduction techniques such as signal averaging can improve spectral quality, they require longer acquisition times, limiting their utility in real-time and high-throughput applications.

This thesis presents a deep learning-based denoising framework designed to enhance the quality of complex-valued NMR spectra. The proposed model, built upon a U-Net architecture, incorporates both real and imaginary components of the …

Influence Of Substrate Temperature On The Properties Of Reactive Dc Magnetron Co-Sputtered Ag-Doped Tio2 Thin Films, Hezekiah B. Sawa

Tanzania Journal of Engineering and Technology (TJET)

This study reports on the influence of substrate temperature on the properties of Ag-doped TiO2 thin films. The films were deposited by reactive DC co-sputtering of Ti and Ag targets at different substrate temperatures and Ag target sputtering powers. Grazing incident X-ray diffractometer confirmed that all films were polycrystalline with dominant peak oriented along (101) planes representing the anatase TiO2 phase. The average grain size of the samples improved with increase in deposition temperature. At a substrate temperature of 450 ℃, the samples had a dominant peak representing the rutile phase, suggesting partial transformation from anatase to rutile phase. The …

Design And Optimization Of An Azeotropic Distillation Pilot Plant For The Production Of Pure Ethanol, Samwel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to design an azeotropic distillation plant using Aspen Plus® V10 software and determine optimal process conditions for producing pure ethanol greater than 95% from pre-concentrated near-azeotropic ethanol-water solution. The non-random two-liquid Redlich-Kwong thermodynamic model was the base method for property analysis and performance prediction. Modelling and simulation of the converged process were conducted for fixed column variables (R = 5, N = 12 and p = 1 atm). Plant operating parameters were varied in the range of 0 to 1 for the pre-heater vapour fraction, 2 to 10 for the column feed plates (NFP), 2 to 6 …

Recent Advancements In Electrochemical Conversion Of Carbon Dioxide, Nandan Nag, Amit Kumar, Sumit Sharma, Sandeep Kumar, Amit K. Thakur

Civil & Environmental Engineering Faculty Publications

Electrochemical reduction of carbon dioxide into eco-friendly and clean products is a promising approach to eradicate pollution. Although carbon dioxide emission is inhibited by the advent of renewable sources of energy, it is present in the atmosphere and needs to be cleaned. The reduction of carbon dioxide from atmospheric gases can be accomplished by its adsorption and subsequent transportation to electrolytic chambers, where it is reduced to hydrocarbons, organic acids or carbonates. This review focuses on developing a three compartment electrochemical cell to reduce carbon dioxide used as a catholyte. Various factors affecting the electrochemical reduction of carbon dioxide and …

Investigation Of Membrane Based Processes For Biomedical Applications, Efecan Pakkaner

Graduate Theses and Dissertations

As substantial developments were achieved in nanotechnology and polymer engineering, especially in the last few decades, the use of membranes and membrane-based procedures was found to be expanding into more and more research and development areas; including biological engineering, life sciences and biomedical engineering. Not only have they been the main focus of meaningful research, but they have also been the main pieces of the solutions to very thorny problems encountered within a wide range of applications from microfluidics to water treatment, thanks to their versatility, cost-effectiveness and biocompatibility, when compared to conventional separation techniques. To celebrate and embrace these …

Investigation Of Surface Charge Using Faraday Bucket Measurements: Analysis On Electrospun Polyvinylidene Fluoride Fiber Mats, Ryan Kantenwein

Williams Honors College, Honors Research Projects

Piezoelectric polymer materials such as polyvinylidene fluoride exhibit beneficial properties for use in personal protective equipment (PPE) against viral contaminants and other foreign microparticles. The electrospinning process of this material allows for surface charge to develop over a controlled surface area. Kynar 761 at 10 wt% demonstrates increased surface charge after withstanding a flow of aerated NaCl particles from a TSI 8130 instrument. Utilizing voltage measurements from a Faraday bucket, 18 wt% Kynar 761 and MG-15 exhibit surface charge when undergoing an electrospinning process; however, Kynar MG-15 displays lower charge values than that of Kynar 761. Several critical factors such …

Development Of Light Actuated Chemical Delivery Platform On A 2-D Array Of Micropore Structure, Hojjat Rostami Azmand, Hojjat Rostami Azmand

Dissertations and Theses

Localized chemical delivery plays an essential role in the fundamental information transfers within biological systems. Thus, the ability to mimic the natural chemical signal modulation would provide significant contributions to understand the functional signaling pathway of biological cells and develop new prosthetic devices for neurological disorders. In this paper, we demonstrate a light-controlled hydrogel platform that can be used for localized chemical delivery in a high spatial resolution. By utilizing the photothermal behavior of graphene-hydrogel composites confined within micron-sized fluidic channels, patterned light illumination creates the parallel and independent actuation of chemical release in a group of fluidic ports. The …

Fermentability Of Concentrated Sulfuric Acid Hydrolyzates From Aspenwood And Pinewood, Kando Janga

Tanzania Journal of Engineering and Technology (TJET)

The fermentability of hydrolyzates derived from two-stage concentrated sulfuric acid hydrolysis of Trembling aspen (Populus tremula) and Scots pine (Pinus sylvestris) were investigated. Three types of hydrolyzates were produced at mild, moderate and high decrystallization severity conditions. Portions of each of the original hydrolyzates were concentrated by vacuum evaporation to increase the sugar fraction to simulate industrial applications. Both sets of hydrolyzates were fermented anaerobically using Saccharomyces cerevisiae ATCC 96581. After 23 hours of fermentation, complete glucose consumption was observed for all the original hydrolyzates, with no signs of inhibition. The ethanol yields from these hydrolyzates ranged from 68% to …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

Development Of A Comsol Microdialysis Model, Towards Creation Of Microdialysis On A Chip With Improved Geometries And Recovery, Patrick Pysz

Graduate Theses and Dissertations

Microdialysis (µD) sampling is a diffusion-limited sampling method that has been widely used in different biomedical fields for greater than 35 years. Device calibration for in vivo studies is difficult for current non-steady state analytes of interest correlated with both inflammatory response and microbial signaling molecules (QS); which exist in low ng/mL to pg/mL with molecular weights over a wide range of 170 Da to 70 kDa. The primary performance metric, relative recovery (RR), relating the collected sample to the extracellular space concentration varies from 10% to 60% per analyte even under controlled bench-top conditions. Innovations in microdialysis device design …

Beneficial Reuse Of Industrial Co2 Emissions Using A Microalgae Photobioreactor: Waste Heat Utilization Assessment, Daniel T. Mohler, Michael H. Wilson, Zhen Fan, John G. Groppo, Mark Crocker

Center for Applied Energy Research Faculty and Staff Publications

Microalgae are a potential means of recycling CO₂ from industrial point sources. With this in mind, a novel photobioreactor (PBR) was designed and deployed at a coal-fired power plant. To ascertain the feasibility of using waste heat from the power plant to heat algae cultures during cold periods, two heat transfer models were constructed to quantify PBR cooling times. The first, which was based on tabulated data, material properties and the physical orientation of the PBR tubes, yielded a range of heat transfer coefficients of 19–64 W m⁻² K⁻¹ for the PBR at wind speeds of 1–10 …

Fabrication And Characterization Of Nanofiber Nylon-6-Mwcnt As An Electrochemical Sensor For Sodium Ions Concentration Detection In Sweat, Kelsey Mills

Williams Honors College, Honors Research Projects

Fabrication and characterization nylon-6-MWCNT nanofiber as an electrochemical sensor to detect sodium ion concentrations specifically in sweat. Using contact angle to determine surface morphology and chronoamperometry testing to identify ideal sensor conditions, tests optimized parameters like weight percent of nylon or other polymers, carbon nanotube (CNT) isomer, and solution concentration to determine reproducibility of functional sensors. Utilizing the electric qualities of carbon nanotubes partnered with the sodium ion selectivity of calixarene treatment and polymers unique properties like flexibility and scalability create open an arena for optimizing sodium ion sensors for further development for functional prototypes. Morphology tests showed that the …

The Fate Of Nitrogen And Faecal Coliform In The Lubigi Wetland In Uganda, Aloyce Mayo

Tanzania Journal of Engineering and Technology (TJET)

The capacity of the Lubigi wetland to reduce nitrogen and faecal coliform pollution entering Lake Kyoga in Uganda was investigated. Three transects with 5 sampling points in each, were established in the wetland. Wetland plants samples were collected from the specific locations along the transects, and laboratory tests and analyses were carried out for plants biomass and nitrogen contents determination. Samples of wetland sediments were also collected, and laboratory tests and analyses were done for determination of nitrogen content in the sediments. Wetland water samples were taken from the main wetland inlet and the main outlet from the wetland main …

Sensor Application Of Poly (Ethylene Glycol) Diacrylate Hydrogels Chemically-Anchored On Polymer Surface, Zhan Gao, Chang-Soo Kim, David B. Henthorn

Electrical and Computer Engineering Faculty Research & Creative Works

We demonstrate a device process combining two photo patternable polymers, poly (ethylene glycol) (PEG)-diacrylate-based-hydrogel and epoxy-based photoresist SU-8, to implement an optofluidic bioanalytical platform through a surface anchoring technique. As an exemplary sensor application, optical dissolved oxygen sensors are fabricated and their performance characterized. The PEG-rich hydrogel is used as a matrix material for the immobilization of oxygen-responsive fluorophore, dichlorotris (1, 10-phenanthroline) ruthenium (II) hydrate. This hydrogel is chemically anchored on the surface of negative-tone photoresist, SU-8, through a free radical reaction in which 1-hydroxycyclohexyl phenyl ketone served as the surface bound photo initiator. The sensor exhibits a reversible Stern-Volmer …

Colorimetric Oxygen Imaging And Quantification With Easily Accessible Optical Devices, Satya Achanta, Sanghan Park, Chang-Soo Kim

Electrical and Computer Engineering Faculty Research & Creative Works

Optical oxygen imaging is essential in monitoring two-dimensional analysis of oxygen distribution. Two easily accessible optical devices were used for oxygen analysis to demonstrate the feasibility of an innovatively simple method. a light panel screen with light-emitting diode (LED) backlight was used as a light source to excite a luminophore film responsive to oxygen. Meso-scale fluidic sensor platform was prepared using porphyrin complex (PtOEP) as the luminophore embedded within ethyl cellulose (EC) polymer matrix. Green LED light uniformly displayed from the light panel excited the luminophore film to exhibit two-dimensional luminescence distribution corresponding to wet gaseous oxygen. a color camera …

An Oxidase-Based Electrochemical Fluidic Sensor With High-Sensitivity And Low-Interference By On-Chip Oxygen Manipulation, Nitin Radhakrishnan, Jongwon Park, Chang Soo Kim

Electrical and Computer Engineering Faculty Research & Creative Works

Utilizing a simple fluidic structure, we demonstrate the improved performance of oxidase-Based enzymatic biosensors. Electrolysis of water is utilized to generate bubbles to manipulate the oxygen microenvironment close to the biosensor in a fluidic channel. for the proper enzyme reactions to occur, a simple mechanical procedure of manipulating bubbles was developed to maximize the oxygen level while minimizing the pH change after electrolysis. the sensors show improved sensitivities based on the oxygen dependency of enzyme reaction. in addition, this oxygen-rich operation minimizes the ratio of electrochemical interference signal by ascorbic acid during sensor operation (i.e., amperometric detection of hydrogen peroxide). …

Optofluidic Glucose Sensor Utilizing An Epoxy-Based, Transparent Dry Film Resist, Zhan Gao, Sijia Gong, Chang Soo Kim, David B. Henthorn

Electrical and Computer Engineering Faculty Research & Creative Works

An enzymatic, fluorescent glucose sensor was constructed with a novel epoxy-Based, optically transparent dry film resist (PerMX 3000 series, DuPont). This material was utilized as the main active material for fluidic structure and optical interrogation. This sensor was based on the enzymatic reaction of glucose oxidase (GOD) and utilized a ruthenium complex fluorophore as the reporting agent. Both the oxygen-sensitive ruthenium complex and GOD were incorporated into poly (ethylene glycol) (PEG)-Based hydrogel materials, which were lithographically patterned and embedded inside the PerMX fluidic channel after wafer-bonding process. the optofluidic sensing platform with this embedded sensing elements exhibited a wide dynamic …

Polymer (Su-8) Optofluidic Device With Embedded Hydrogel Oxygen Sensing Elements, Zhan Gao, David B. Henthorn, Chang-Soo Kim

Chemical and Biochemical Engineering Faculty Research & Creative Works

The SU-8 photopolymer is an excellent alternative for traditional materials used in fluidic devices such as glass- or silicon-Based inorganic materials. We describe a new chemically anchored, lithographically patterned hydrogel sensing element embedded in a completed SU-8 fluidic channel structure after the channel bonding process. Polyethylene glycol (PEG) hydrogel films incorporating oxygen-responsive ruthenium-complex fluorophores are grafted and patterned by photopolymerization of solution-phase precursors on the modified SU-8 channel surface. the optofluidic sensing platform with this embedded sensing elements exhibited excellent performance in measuring dissolved oxygen content. a unique advantage of this method is the selective growth of various functional films …

Optofluidic Biosensors Based On Color Imaging, Jongwon Park, Chang-Soo Kim

Electrical and Computer Engineering Faculty Research & Creative Works

A color CCD (charge-coupled device) camera is used as a chemical detector to quantify fluorescence emission intensities from two kinds of optofluidic device platforms. the fluorophores responsive to oxygen are immobilized in photo-patternable hydrogel matrices. the first device is a hydrogel sensor array formed within a commercial silicone elastomer imaging chamber. the second one involves a double-chamber fluidic device composed of a permeable membrane layer and dry film photoresist layers. the results suggest that digital color imagers, in combination with a simple color separation method, can serve as the high-quality chemical detectors for fluidic biosensors and biological culture platforms. © …

Color Intensity Method For Hydrogel Oxygen Sensor Array, Jongwon Park, Wonhak Hong, Chang-Soo Kim

Electrical and Computer Engineering Faculty Research & Creative Works

The oxygen imaging technique to obtain a 2-D distribution is a convenient method because it does not require individual addressing of each sensing element in a sensor array. Until recently, color charge coupled devices (CCDs) have rarely been used for oxygen imaging in spite of usefulness for analyzing the spectral content of images. in this work, a color CCD camera was used for luminescence intensity imaging. Two methods of color intensity analysis are investigated and compared. the first method is to analyze the total Red-Green-Blue (RGB) color intensity of the original color image. the second method involves extracting the red …

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Desulfovibrio Desulfuricans G20 Tetraheme Cytochrome Structure At 1.5 A˚ And Cytochrome Interaction With Metal Complexes, Mrunalini Pattarkine, J J. Tanner, C A. Bottoms, Y H. Lee, Judy D. Wall

Faculty Works

The structure of the type I tetraheme cytochrome c3 from Desulfovibrio desulfuricans G20 was determined to 1.5 A˚ by X-ray crystallography. In addition to the oxidized form, the structure of the molybdate-bound form of the protein was determined from oxidized crystals soaked in sodium molybdate. Only small structural shifts were obtained with metal binding, consistent with the remarkable structural stability of this protein. In vitro experiments with pure cytochrome showed that molybdate could oxidize the reduced cytochrome, although not as rapidly as U(VI) present as uranyl acetate. Alterations in the overall conformation and thermostability of the metal-oxidized protein were investigated …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Incorporation Of Cerium And Neodymium In A Uranyl Hydroxide Solid, Chang-Soo Kim, David J. Wronkiewicz, R. J. Finch, E. C. Buck

Electrical and Computer Engineering Faculty Research & Creative Works

The migration behavior of radionuclides in a nuclear-waste repository will be influenced, in part, by their equilibrium solubilities in the presence of radionuclide-bearing solids and/or adsorption affinities as trace components onto the surfaces of solid host phases. Uranium phases that precipitate on the surface of altered spent nuclear fuel may thus influence the mobility of radionuclides released in the near-field environment, since by proximity, these will be the first phases that the radionuclides encounter following their release from the spent fuel matrix. We have evaluated the potential for incorporating radionuclides into crystalline compounds by precipitating uranyl phases from aqueous solutions …

Studies On The Formation Of Dna-Cationic Lipid Composite Films And Dna Hybridization In The Composites, Murali Sastry, Vidya Ramakrishnan, Mrunalini Pattarkine, Krishna N. Ganesh

Faculty Works

The formation of composite films of double-stranded DNA and cationic lipid molecules (octadecylamine, ODA) and the hybridization of complementary single-stranded DNA molecules in such composite films are demonstrated. The immobilization of DNA is accomplished by simple immersion of a thermally evaporated ODA film in the DNA solution at close to physiological pH. The entrapment of the DNA molecules in the cationic lipid film is dominated by attractive electrostatic interaction between the negatively charged phosphate backbone of the DNA molecules and the protonated amine molecules in the thermally evaporated film and has been quantified using quartz crystal microgravimetry (QCM). Fluorescence studies …

Cationic Surfactant Mediated Hybridization And Hydrophobization Of Dna Molecules At The Liquid/Liquid Interface And Their Phase Transfer, Murali Sastry, Ashavani Kumar, Mrunalini Pattarkine, Vidya Ramakrishnan, Krishna N. Ganesh

Faculty Works

Hybridization of complementary oligonucleotides mediated by a cationic surfactant at the water/hexane interface leads to hydrophobic, double-helical DNA which may be readily phase transferred to the organic phase and cast into thin films on solid substrates.