Biochemical and Biomolecular Engineering Commons^™

Effect Of Ionic Strength On Gelation Time And Strength Of Amps-Based Polymer Gels, Maryam Sharifi Paroushi, Xuyang Tian, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Polymer gel treatment has been widely applied for improving sweep efficiency and controlling excessive water and gas production. Their performance depends on gelation time and final gel strength. In most studies, brine salinity is used to describe the effect of formation water on gel behavior. However, changing salinity also changes ionic strength and ion composition at the same time. Because of this coupling, it is difficult to identify the mechanisms controlling gelation, which has led to inconsistent trends in the literature. Increasing salinity has been reported to either slow or accelerate gelation and to weaken or strengthen gels depending on …

Evaluation Of Chromium-Crosslinked Amps-Hpam Copolymer Gels: Effects Of Key Parameters On Gelation Time And Strength, Maryam Sharifi Paroushi, Baojun Bai, Thomas P. Schuman, Yin Zhang, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Controlling CO₂ channeling in heterogeneous reservoirs remains a major challenge for both enhanced oil recovery (EOR) and secure geological storage. AMPS-HPAM copolymers exhibit high-temperature resistance and brine tolerance compared with conventional HPAM gels, making them well suited for the harsh environments associated with CO₂ injection. Chromium-based crosslinkers (CrAc and CrCl₃) were investigated because sulfonic acid groups in AMPS can coordinate with trivalent chromium ions, enabling dual ionic crosslinking and the formation of a robust gel network. While organic crosslinked AMPS-HPAM gels have been widely studied, the behavior of chromium-crosslinked AMPS-containing systems, particularly their gelation kinetics under …

Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For Conformance Control In Ultra-High Temperature Reservoirs, Yanbo Liu, Tao Song, Caleb Kwasi Darko, Thomas P. Schuman, Mingzhen Wei, Baojun Bai

Chemistry Faculty Research & Creative Works

Preferential fluid flow remains a major challenge in subsurface energy production and gas storage operations, resulting in excessive water production in mature oil fields, reduced heat extraction in geothermal reservoirs, and low sweep and storage efficiency in CO₂-EOR projects. Polymer gels are widely used to mitigate high-permeability channels; however, conventional systems exhibit limited plugging efficiency and short lifetimes in ultra-high-temperature reservoirs due to poor thermal stability. This study presents a novel ultra-high-temperature-resistant preformed particle gel (UHT-PPG) developed for conformance control in reservoirs with temperatures of 150–275 °C and severe super-K or channeling problems. The material was evaluated in …

De Novo Protein Binding To Zinc Oxide Through Biomineralization Pathways, Jean-Mark A. Francis

Theses and Dissertations

De novo proteins are structurally distinct from proteins found in nature and thus capable of having their amino acid sequence modified to accomplish tasks such as increasing protein-nanoparticle binding without unfolding or decomposing. Zinc Oxide nanoparticles are functionally distinct from their bulk counterparts and are widely used as semiconductors in a variety of fields such as medicine and agriculture. With demand for these nanoparticles increasing, environmentally sustainable methods of Zinc Oxide nanoparticle synthesis are being investigated as an eco-friendly alternative to currently utilized but environmentally hazardous chemical and physical techniques. This research investigates the binding characteristics between Zinc Oxide nanoparticles …

Synergistic Doping And Coating Strategy For Boosting Na0.7mno2 Cathode Performance In Sodium-Ion Batteries, Ahmad Helaley, Han Yu, Manashi Nath, Xinhua Liang

Chemistry Faculty Research & Creative Works

Advancing sodium-ion battery (SIB) technology requires novel approaches to optimize cathode materials for improved electrochemical performance. In this study, we employ atomic layer deposition (ALD) to precisely modify the surface of P2-type Na_0.7MnO₂ cathodes with different coating materials including ZnO, NiO, and Al₂O₃, followed by post-annealing at 750°C for 10 hours. The strategic combination of ALD and thermal treatment can achieve thin film coating on particle surface and promote element doping into the near-surface lattice, as confirmed by electron energy loss spectroscopy (EELS) analysis. The incorporation of Zn, Al, and Ni results in …

Laboratory Investigation Of High-Temperature Preformed Particle Gels For Fluid Control In Granite Cores For Geothermal Applications, K. Caleb Darko, Yanbo Liu, Thomas P. Schuman, Mingzhen Wei, Baojun Bai

Chemistry Faculty Research & Creative Works

To understand the applicability of high-temperature preformed particle gel (HT-PPG) for control of short-circuiting in enhanced geothermal systems (EGSs), core flooding experiments were conducted on fractured granite cores under varying fracture widths, gel particle sizes and swelling ratios. Key parameters such as injection pressure, water breakthrough pressure, and residual resistance factor were measured to evaluate HT-PPG performance. The gel exhibited strong injectability, entering granite fractures at pressure gradients as low as 0.656 MPa/m; HT-PPG yields a superior sealing performance by significantly reducing the permeability; and dehydration occurs during HT-PPG propagation, with a dehydration ratio ranging from 4.71% to 11.36%. This …

Binary Solid/Liquid Equilibrium Of Mixtures Of Thermally Robust Salts And Molecular Compounds For Use As Heat Transfer Fluids, Jared Ridge Mathews

Honors Theses

Fossil fuels, contributors to climate change that may bear catastrophic consequences, power the entire world. The human species is almost entirely dependent on fossil fuels for energy, but other sources of renewable and environmentally friendly energy must be developed. Concentrated solar power (CSP) is a promising source of renewable energy with hampered potential—better heat transfer fluids (HTFs) are needed for it to be economically feasible. Currently, the HTFs in industrial use are predominantly either synthetic oils or nitrate-based molten salts. Synthetic oils are only stable up to 400 °C, and molten salts often have high melting temperatures, making them prone …

Composition And Rich/Lean Loading-Dependent Density Measurements Of A Series Of Aqueous Ionic Amines For Co2 Capture, Claudia Nguyen

Honors Theses

As climate change worsens worldwide, there is a drive to develop more efficient and sustainable methods to mitigate its impact through carbon capture methods like carbon dioxide scrubbing. Carbon scrubbing directly captures carbon dioxide (CO2) emissions from industries or power plants before they are released into the environment. The CO2 captured can be utilized for various applications or can be stored underground. However, this method faces numerous challenges, such as the degradation of the solvent or corrosion of equipment. As a result, research has expanded to find a better medium to overcome these issues. In particular, aqueous ionic amines (AIA) …

Thermal Stability Analysis Of Aqueous Ionic Amines For Sustainable Co2 Capture, Li Hua Zang, Keegan Everitt, Kevin West, Brooks D. Rabideau, Breanna Dobyns, James Davis

Shelby Hall Graduate Research Forum Posters

In closed air cabin atmospheres such as those of spacecraft, CO₂ accumulation jeopardizes crew respiratory function and may gradually affect sensitive equipment, making effective air revitalization critical. Traditional CO₂ capture methods like monoethanolamine (MEA) efficiently capture CO₂ but suffer from high volatility, leading to solvent loss and unpleasant odor, as well as corrosion and degradation, requiring frequent replacement. These flaws demand eco-friendly, durable alternatives. This study addresses these limitations by exploring a series of aqueous ionic amines (AIAs), salts similar to MEA in CO₂ capture efficiency but with improved thermal stability—crucial for preventing degradation under high regeneration temperatures and prolonged …

Effect Of Pre-Adsorbed Species On High-Pressure Adsorption Of Methane In Zeolite 5a Using Grand Canonical Monte Carlo (Gcmc) Simulations, Kanhamardi Lao, Brooks D. Rabideau

Shelby Hall Graduate Research Forum Posters

Natural gas upgrading, which removes impurities from methane (CH4), is essential for industrial applications, including liquefied natural gas (LNG) production and power generation, as well as for residential use. Removing non-hydrocarbon impurities such as carbon dioxide (CO2), nitrogen (N2), and water vapor (H2O), among others, along with separating heavier hydrocarbon gases from raw natural gas, is required to achieve high- purity methane and prevent pipeline corrosion. Zeolite 5A is a microporous aluminosilicate material with a pore size of approximately 5 Å, containing sodium and calcium cations that balance the framework’s negative charge. Its structure offers high thermal stability and a …

Experimental Evaluation Of A Recrosslinkable Co2-Resistant Micro-Sized Preformed Particle Gel For Co2 Sweep Efficiency Improvement In Reservoirs With Super-K Channels, Adel Alotibi, Tao Song, Ali Al Brahim, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

A recross linkable CO₂-resistant branched preformed particle gel (CO₂-BRPPG) was developed for controlling CO₂ injection conformance, particularly in reservoirs with super-permeable channels. Previous work focused on a millimeter-sized CO₂-BRPPG in open fractures, but its performance in high-permeability channels with pore throat networks remained unexplored. This study used a sand pack model to evaluate a micro-sized CO₂-BRPPG under varying conditions of salinity, gel concentration, and pH. at ambient conditions, the equilibrium swelling ratio (ESR) of the gel reached 76 times its original size. This ratio decreased with increasing salinity but remained stable …

Boosting The Power Performance Of Microbial Fuel Cells By Using Dual Nanomaterial-Modified Carbon Felt Electrodes, Krishna Thapa, Wenyan Liu, Yuwei Zhang, David J. Westenberg, Yishu Zhou, Risheng Wang

Chemistry Faculty Research & Creative Works

Innovative design enhancements to microbial fuel cells (MFCs) are pivotal for improving their viability as renewable energy sources. This study introduces a dual approach to electrode modification, integrating polyaniline (PANI) and gold nanoparticles (AuNPs) on carbon felt (CF) anodes coupled with a unique cathode composed of DNA origami and chitosan. The synergistic effect of PANI and AuNPs significantly increases the hydrophilicity and conductivity of the anode, leading to a considerable surge in power density. Concurrently, the biocompatible DNA origami and chitosan-functionalized cathode facilitates efficient electron transfer without relying on conventional catalysts. Together, these modifications yield a 52.42% increase in the …

Advancing Simultaneous Extraction And Sequential Single-Particle Icp-Ms Analysis For Metallic Nanoparticle Mixtures In Plant Tissues, Lei Xu, Xingmao Ma, John Yang, Joel G. Burken, Paul Ki-Souk Nam, Honglan Shi, Hu Yang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Engineered Nanoparticles (ENPs) Have Been Increasingly Used in Agricultural Operations, leading to an Urgent Need for Robust Methods to Analyze Co-Occurring ENPs in Plant Tissues. in Response, This Study Advanced the Simultaneous Extraction of Coexisting Silver, Cerium Oxide, and Copper Oxide ENPs in Lettuce Shoots and Roots using Macerozyme R-10 and Analyzed Them by Single-Particle Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Additionally, the Standard Stock Suspensions of the ENPs Were Stabilized with Citrate, and the Long-Term Stability (Up to 5 Months) Was Examined for the First Time. the Method Performance Results Displayed Satisfactory Accuracies and Precisions and Achieved Low Particle Concentration …

Investigating The Impact Of Secondary Activation Time On The Adsorption Properties Of Activated Biochar For Arsenic Removal From Wastewater, Achyuth Bharadwaj Rayarao

Graduate Theses and Dissertations (2019 - present)

Biochar, a naturally occurring and renewable carbon material, becomes porous through activation. Activated biochar is an ideal candidate for use as an adsorbent. The objective of this study is to investigate whether activated biochar derived from Colorado soft pine serves as a better adsorbent and demonstrates enhanced adsorption capabilities after undergoing secondary physical activation at various activation times. The effect of secondary action time on physical adsorption properties drawn from the analysis of isotherm plots, surface areas and pore size patterns were examined by using a physisorption analyzer. Chemical structures were identified using both ultimate and proximate analyses, while porosity …

Highly Efficient Dopamine Sensing With A Carbon Nanotube-Encapsulated Metal Chalcogenide Nanostructure, Harish Singh, Jiandong Wu, Kurt A.L. Lagemann, Manashi Nath

Chemical and Biochemical Engineering Faculty Research & Creative Works

Carbon nanotube-encapsulated nickel selenide composite nanostructures were used as nonenzymatic electrochemical sensors for dopamine detection. These composite nanostructures were synthesized through a simple, one-step, and environmentally friendly chemical vapor deposition method, wherein the CNTs were formed in situ from pyrolysis of a carbon-rich metallo-organic precursor. The composition and morphology of these hybrid NiSe2-filled carbon nanostructures were confirmed by powder X-ray diffraction, Raman, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy images. Electrochemical tests demonstrated that the as-synthesized hybrid nanostructures exhibited outstanding electrocatalytic performance toward dopamine oxidation, with a high sensitivity of 19.62 μA μM-1 cm-2, low detection limit, broad linear …

Biomolecular Crystals As Functional Materials, Fahmeed Khan Sheehan

Dissertations, Theses, and Capstone Projects

The field of supramolecular chemistry has undergone significant evolution over the last few decades, progressing from fundamental studies of self-assembling systems to the rational design of functional materials with exceptional properties. Among these materials, short peptides have emerged as a chemically simple yet highly versatile class of biomimetic compounds. Initially, short peptides were used as model systems to understand larger protein interactions. As the field progressed, short peptides were found to have exceptional functionality, and are now explored as functional nanomaterials for diverse applications. In many cases, short peptide materials have displayed properties not found in biology, in some cases …

Novel Re-Crosslinkable Preformed Particle Gels (Rppg) For Parent- And Infill-Well-Fracture Interactions Mitigation, Xiaojing Ge, Adel Alotibi, Ahmed Al-Hlaichi, Yanbo Liu, Tao Song, Junchen Liu, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Hydraulic fracturing treatments in unconventional infill (or "child") wells can be significantly affected by depletion from existing parent-well, resulting in asymmetrical fracture growth. These issues may lead to excessive load-water production, proppant deposition, casing deformation in the parent well, and unbalanced stimulation of infill wells. To mitigate these effects, various strategies have been proposed, including the use of far-field diverters in child wells and repressurization of parent wells. Additionally, an increasingly popular strategy involves injecting near-wellbore diverters to temporarily plug entry points into the parent wellbores during frac operations on infill wells. To achieve better application, a novel low-cost, self-degradable, …

Synthetic Approaches Of Carbohydrate Based Self-Assembling Systems, Guijun Wang, Anji Chen, Pramod Aryal, Jonathan Bietsch

Chemistry & Biochemistry Faculty Publications

Carbohydrate-based self-assembling systems are essential for the formation of advanced biocompatible materials via a bottom-up approach. The self-assembling of sugar-based small molecules has applications encompassing many research fields and has been studied extensively. In this focused review, we will discuss the synthetic approaches for carbohydrate-based self-assembling (SA) systems, the mechanisms of the assembly, as well as the main properties and applications. This review will mainly cover recent publications in the last four years from January 2020 to December 2023. We will essentially focus on small molecule self-assembly, excluding polymer-based systems, which include various derivatives of monosaccharides, disaccharides, and oligosaccharides. Glycolipids, …

Lessons Learned From Laboratory Study And Field Application Of Re-Crosslinkable Preformed Particle Gels Rppg For Conformance Control In Mature Oilfields With Conduits/Fractures/Fracture-Like Channels, Baojun Bai, Thomas P. Schuman, David Smith, Tao Song

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This Paper Surveys the Role of Re-Crosslink able Preformed Particle Gels (RPPG) in Addressing Conformance Challenges within Mature Oilfields. Despite Widespread Preformed Particle Gel (PPG) Application in 15,000+ Wells, their Limitations in Sealing Fractures and Conduits Prevalent in Mature Reservoirs Have Driven the Development of RPPG Formulations. Synthesized in Various Sizes from Micrometer to Millimeter Levels, These Environmentally Friendly RPPGs Are Tailored for Diverse Reservoir Conditions. Findings Showcase the Successful Laboratory-Scale Creation and Upscaling of RPPG Products, Offering Adaptability to Temperatures from 20 to 175°C, Customizable Sizes, Swelling Ratios (5 to 40 Times), and Re-Crosslinking Times Spanning Minutes to Days. …

Molecular Understanding And Design Of Deep Eutectic Solvents And Proteins Using Computer Simulations And Machine Learning, Usman Lame Abbas

Theses and Dissertations--Chemical and Materials Engineering

Hydrophobic deep eutectic solvents (DESs) have emerged as excellent extractants. A major challenge is the lack of an efficient tool to discover DES candidates. Currently, the search relies heavily on the researchers’ intuition or a trial-and-error process, which leads to a low success rate or bypassing of promising candidates. DES performance depends on the heterogeneous hydrogen bond environment formed by multiple hydrogen bond donors and acceptors. Understanding this heterogeneous hydrogen bond environment can help develop principles for designing high performance DESs for extraction and other separation applications. This work investigates the structure and dynamics of hydrogen bonds in hydrophobic DESs …

Dual Crosslinked Poly(Acrylamide-Co-N-Vinylpyrrolidone) Microspheres With Re-Crosslinking Ability For Fossil Energy Recovery, Jingyang Pu, Baojun Bai, Jiaming Geng, Na Zhang, Thomas Schuman

Chemical and Biochemical Engineering Faculty Research & Creative Works

Microspheres have been proposed to be applied in controlling wastewater production for mature oilfields and migrating leakage for gas and nuclear waste storage. However, it remains challenging for stacked microspheres to maintain strong blocking ability in micron-sized small pores or fractures. in this study, a novel microsphere was developed with comprehensive properties including high deformability and long re-crosslinking time upon tunable swelling ratio for the applications. a dual covalent and physical crosslinking strategy was used to develop novel microspheres reinforced by a hydrogen bond (H-bond, between pyrrole ring and amide group) and coordination bond (between chromium acetate (CrAc) and carboxyl …

Repeated Low-Level Blast Exposure Alters Urinary And Serum Metabolites, Austin Sigler, Jiandong Wu, Annalise Pfaff, Olajide Adetunji, Paul Ki-Souk Nam, Donald James, Casey Burton, Honglan Shi

Chemistry Faculty Research & Creative Works

Repeated exposure to low-level blast overpressures can produce biological changes and clinical sequelae that resemble mild traumatic brain injury (TBI). While recent efforts have revealed several protein biomarkers for axonal injury during repetitive blast exposure, this study aims to explore potential small molecule biomarkers of brain injury during repeated blast exposure. This study evaluated a panel of ten small molecule metabolites involved in neurotransmission, oxidative stress, and energy metabolism in the urine and serum of military personnel (n = 27) conducting breacher training with repeated exposure to low-level blasts. The metabolites were analyzed using HPLC—tandem mass spectrometry, and the Wilcoxon …

Dpd Guided Insight On The Formation Process Of Polyethersulfone Membranes By Nonsolvent Induced Phase Separation And The Effects Of Additives, Eric Ledieu

Graduate Theses and Dissertations

Dissipative particle dynamics (DPD), a coarse grain simulation method, was applied to the membrane formation process of non-solvent induced phase separation (NIPS) to gain further insight on the mechanism of certain variables and how they affect the final morphology. NIPS involves two solutions, an organic polymer dissolved in an organic solvent colloquially called the dope and an aqueous coagulation bath, brought into contact with one another. The solvents then mix, causing the polymer to fall out of solution as an asymmetric membrane with a dense surface layer and a more open subsurface layer in response to the decreasing solubility. Polyethersulfone …

Design And Applications Of Fmoc-Histidine And Aspartic Acid Tripeptides As Proton Conductive Materials, Shejla S. Pollozi

Dissertations, Theses, and Capstone Projects

The increasing demand for clean and sustainable energy has driven forward rapid improvements in polymer-electrolyte fuel cells and the use of ion-conducting polymers (ionomers) as proton exchange membranes and catalyst binders. While perfluorinated electrolytes have been commercially used as conductive membranes for nearly four decades, a new class of sustainable, conductive materials has emerged, inspired by the efficiency of charge transport processes in biological systems. These molecules, knows as peptide amphiphiles (PAs), have gained popularity as building blocks for the bottom-up fabrication of nanomaterials through supramolecular self-assembly. Supramolecular nanostructures, often in the form of hydrogels, are held together via non-covalent …

Transport And Plugging Performance Evaluation Of A Novel Re-Crosslinkable Microgel Used For Conformance Control In Mature Oilfields With Super-Permeable Channels, Adel Alotibi, T. Song, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preformed particle gels (PPG) have been widely applied in oilfields to control excessive water production. However, PPG has limited success in treating opening features because the particles can be flushed readily during post-water flooding. We have developed a novel micro-sized Re-crosslinkable PPG (micro-RPPG) to solve the problem. The microgel can re-crosslink to form a bulk gel, avoiding being washed out easily. This paper evaluates the novel microgels' transport and plugging performance through super-permeable channels. Micro-RPPG was synthesized and evaluated for this study. Its storage moduli after fully swelling are approximately 82 Pa. The microgel characterization, self-healing process, transportation behavior, and …

Investigation Of Additives And Ingredients Of Bio-Resin For Visible Wavelength Laser-Induced Polymerization, Patrick Riggs

College of Graduate Studies: Theses & Dissertations

Optical 3D printing is a branch of Additive manufacturing (AM) that utilizes low-waste production leading to efficient and rapid prototyping. Currently, this method of AM is associated with mainly petroleum-based resins. Bio-resin polymerization is an emerging research area for finding replacements for petroleum-based resins, but curing the resin with laser energy is not normally a practical use case. Current optical 3D printing uses lasers to cure liquid resins to form solid 3D objects in a layer-by-layer process which is time consuming, defect prone, and a leading limiting factor for high volume production; so, finding a way to incorporate bio-resin into …

Chemical Decomposition Of Flexible Polyurethane Foam To Generate A Media For Microbial Upcycling, Kaushik Baruah

Dissertations, Master's Theses and Master's Reports

Polyurethane waste is becoming a global concern as a large amount is being disposed of in landfills every year, and only a fraction is being recycled. Several polyurethane recycling techniques exist, of which ammonolysis and base-catalyzed hydrolysis is the least explored. Flexible polyurethane foam (FPUF) decomposition can generate amines that can act as a carbon source for the growth of microbial consortia. This study aims to generate a novel media capable of microbial upcycling via ammonolysis and base-catalyzed hydrolysis of flexible polyurethane foams (FPUFs) using ammonium hydroxide and subsequently determine the reaction conditions for maximum solubilization of polyurethane foam in …

Investigations Of Prokaryotic Defense Systems, Hannah Domgaard

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Bacteria are constantly threatened with infection by mobile genetic elements (MGE) such as bacteriophage and plasmids. Bacteriophage and plasmids require the bacteria's cellular infrastructure to replicate their genomes. Rampant replication can lead to cell death which is one reason why bacteria have developed a diverse array of immune systems to prevent or limit infection. This thesis studies three types of bacterial immune systems, type IV-A CRISPR-Cas (Clustered Regularly Interspaced Short Palindromic Repeat –CRISPR associated), type V-A2 CRISPR-Cas systems, and Wadjet systems.

The type IV-A system lies adjacent to a dinG-like helicase gene. Research has shown that this system can target …

Establishing Pteridine Metabolism In A Progressive Isogenic Breast Cancer Cell Model – Part Ii, Lindsey Rasmussen, Zachary Foulks, Jiandong Wu, Casey Burton, Honglan Shi

Chemistry Faculty Research & Creative Works

Introduction: Determining the biological significance of pteridines in cancer development and progression remains an important step in understanding the altered levels of urinary pteridines seen in certain cancers. Our companion study revealed that several folate-derived pteridines and lumazines correlated with tumorigenicity in an isogenic, progressive breast cancer cell model, providing direct evidence for the tumorigenic origin of pteridines. Objectives: This study sought to elucidate the pteridine biosynthetic pathway in a progressive breast cancer model via direct pteridine dosing to determine how pteridine metabolism changes with tumorigenicity. Methods: First, MCF10AT breast cancer cells were dosed individually with 15 pteridines to determine …

Efficient Removal Of Lead Ions From Aqueous Media Using Sustainable Sources On Marine Algae, Hannah Namkoong, Erik Biehler, Gon Namkoong, Tarek M. Abdel-Fattah

Electrical & Computer Engineering Faculty Publications

The goal of this project is to explore a new method to efficiently remove Pb(II) ions from water by processing Undaria pinnatifida into immobilized beads using sodium alginate and calcium chloride. The resulting biosorbent was characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS). Using immobilized U. pinnatifida, we investigated the effect of various factors on Pb(II) ion removal efficiency such as temperature, pH, ionic strength, time, and underlying biosorption mechanisms. For Pb(II) ion biosorption studies, Pb(II) ion biosorption data were obtained and analyzed using Langmuir and Freundlich adsorption models. It …