Chemical Engineering Commons^™

Synthesis And Characterization Of Pvp Based Catalysts For Selected Application In Catalysis, Hany A. Elazab, Mohamed N. Ayad, Mohamed M. Hammam, Mostafa A. Radwan, Mohamed A. Sadek

Chemical and Biochemical Engineering Faculty Research & Creative Works

This research aims to study the catalyst activity in specific reactions and the characteristics of the catalyst in order to optimize its performance. This research investigates PVP based catalysts and their properties and applications. PVP was prepared in combination with different metal oxides in order to be tested for different catalytic applications including dye removal. Methyl orange was used as a dye and different concentrations were tested against different metallic ions in order to optimize the catalyst for being used in dye removal applications. Spectrophotometer was used to calculate the concentration of the dye before and after catalyst exposure and …

Development Of Novel Adsorbent For Industrial Waste Water Treatment, Hassaan M. Shehata, Dalia A. Ali, Islam M. Al-Akraa Dr, Hany A. Elazab, Hoda A. Elsawy Dr

Chemical Engineering

The main objective of this research project is to perform some experimental procedures to inform the ability of the novel adsorbent used in this project. The chemical modification of the adsorbent is the chemical oxidation of pure powder chitosan using some specific redox pairs which are potassium dichromate and sodium bisulphite. After preparing the modified chitosan, there are some parameters that must be discussed during the adsorption process. The first parameter is the time parameter, showing experimentally the optimum time for adsorption under certain conditions by collecting values of absorbance and concentration of thymol blue adsorbed after the process from …

Synthesis And Characterization Of Chitosan Based Catalyst For Catalysis Applications, Mostafa Radwan

Chemical Engineering

In this research, chitosan based catalyst synthesis and characterization was investigated for different application in catalysis as chitosan based catalyst was combined with metal oxides in order to be used in dye removal of methyl orange (MO). Diluted acetic acid was used to dissolve chitosan then different percentages for metallic ions were mixed with diluted chitosan and then, 500 μL were added to the sample to reduce the metal salts then, microwave was used to heat the mixture for 5 minutes and then dried at 80-100 °C. Finally, X- ray diffraction was used to confirm the catalyst prepared. The aim …

Development Of Novel Adsorbent For Industrial Waste Water Treatment, Islam M. Al-Akraa, Hassan M. Shehata Eng, Dalia A. Ali Eng., Hoda A. Elsawy Dr

Chemical Engineering

The main objective of this research project is to perform some experimental procedures to inform the ability of the novel adsorbent used in this project. The chemical modification of the adsorbent is the chemical oxidation of pure powder chitosan using some specific redox pairs which are potassium dichromate and sodium bisulphite. After preparing the modified chitosan, there are some parameters that must be discussed during the adsorption process. The first parameter is the time parameter, showing experimentally the optimum time for adsorption under certain conditions by collecting values of absorbance and concentration of thymol blue adsorbed after the process from …

Influences Of Morphology And Nitrogen Doping On The Electrocatalytic Characteristics For Oxygen Reduction Reaction Of Nio/Rgo, Dong Liang, Heng-Yi Fang, Shuo Yao, Jie-Mei Yu, Zhao-Liang Zhang, Zhan-Kun Jiang, Xue-Ping Gao, Tai-Zhong Huang

Journal of Electrochemistry

In this research, the reduced graphene oxide (rGO) supported sheet-like NiO (NiO/rGO) and spherical-like NiO (NiO/N-rGO) catalysts for oxygen reduction reaction (ORR) were prepared. The structures, morphologies and chemical states of the two catalysts were characterized by X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The electrochemical catalytic performance of the two catalysts for ORR were investigated by cyclic voltammetry (CV), Tafel, linear sweeping voltammetry (LSV), rotating disc electrode (RDE) and rotating ring disc electrode (RRDE) tests. Electrochemical results showed that the current density and onset potential (about 0.89 V) …

Atomically Dispersed Pd On Nanodiamond/Graphene Hybrid For Selective Hydrogenation Of Acetylene, Fei Huang, Yuchen Deng, Yunlei Chen, Xiangbin Cai, Mia Peng, Zhimin Jia, Pengju Ren, Dequan Xiao, Xiaodong Wen, Ning Wang, Hongyang Liu, Ding Ma

Chemistry and Chemical Engineering Faculty Publications

An atomically dispersed palladium (Pd) catalyst supported onto a defective nanodiamond-graphene (ND@G) is reported here for selective hydrogenation of acetylene in the presence of abundant ethylene. The catalyst exhibits remarkable performance for the selective conversion of acetylene to ethylene: high conversion (100%), ethylene selectivity (90%), and good stability (i.e., steady for at least 30 hours). The unique struc-ture of the catalyst (i.e., atomically dispersion of Pd atoms on graphene through Pd-C bond anchoring) ensure the facile desorption of ethylene against the over-hydrogenation of ethylene to undesired ethane, which is the key for the outstanding selectivity of the catalyst.

Scaling Relationships Across Chemically Related Adsorbates For Fast Screening Of Alloy Catalysts For Propane Dehydrogenation, Anne Esther Serban, Ranga Rohit Seemakurthi, Brandon C. Bukowski, Jeffrey Greeley

The Summer Undergraduate Research Fellowship (SURF) Symposium

A catalyst is a material which speeds up the rate of a specific reaction. A reaction that is of significant importance to the chemical industry is the selective transformations of light alkanes (ethane, propane), which are largely available in shale gas, to olefins. These olefins can then be converted into higher-value chemicals, materials, and fuels. However, there are several undesired reactions that take place alongside the main dehydrogenation reaction, so a catalyst of high selectivity is desired. Apart from the industrially used PtSn catalyst, work by our experimental collaborators has shown that various other Pt and Pd alloys (In, Zn) …

An Investigation Of The Effects Of The Second Pyrolysis On The Chemistry, Morphology, And Performance Of Iron-Nicarbazin Catalysts, Elizabeth B. Weiler

Chemical and Biological Engineering ETDs

Proton exchange membrane fuel cells offer a cost-effective, environmentally friendly, and sustainable alternative to petroleum-based power sources to the transportation sector. However, slow electrochemical reactions at the cathode of these fuel cell prevent the technology from being competitive. Iron-nitrogen-carbon based catalysts have emerged as a viable answer to this problem, yet further progress is needed to improve their performance beyond that of current state-of-the-art platinum-based catalysts, which are economically and geopolitically impractical to be a final solution. Currently, a two-step high temperature pyrolysis method has proven a promising way to synthesize iron-nitrogen-carbon catalysts for optimized performance, but there is a …

Synergistic Interactions Of H2 And N2 With Molten Gallium In The Presence Of Plasma, Maria L. Carreon, Daniel F. Jaramillo-Cabanzo, Indira Chaudhuri, Madhu Menon, Mahendra K. Sunkara

Physics and Astronomy Faculty Publications

The present study examines the interaction of hydrogen and nitrogen plasmas with gallium in an effort to gain insights into the mechanisms behind the synergetic effect of plasma and a catalytic metal. Absorption/desorption experiments were performed, accompanied by theoretical-computational calculations. Experiments were carried out in a plasma-enhanced, Ga-packed, batch reactor and entailed monitoring the change in pressure at different temperatures. The results indicated a rapid adsorption/dissolution of the gas into the molten metal when gallium was exposed to plasma, even at a low temperature of 100 °C. The experimental observations, when hydrogen was used, indicate that gallium acts as a …

Catalytic Oxidation And Depolymerization Of Lignin In Aqueous Ionic Liquid, Lalitendu Das, Siquan Xu, Jian Shi

Biosystems and Agricultural Engineering Faculty Publications

Lignin is an integral part of the plant cell wall, which provides rigidity to plants, also contributes to the recalcitrance of the lignocellulosic biomass to biochemical and biological deconstruction. Lignin is a promising renewable feedstock for aromatic chemicals; however, an efficient and economic lignin depolymerization method needs to be developed to enable the conversion. In this study, we investigated the depolymerization of alkaline lignin in aqueous 1-ethyl-3-methylimidazolium acetate [C₂C₁Im][OAc] under oxidizing conditions. Seven different transition metal catalysts were screened in presence of H₂O₂ as oxidizing agent in a batch reactor. CoCl₂ and …

An Efficient Palladium-Thiourea Catalysed Heck Cross-Coupling Reaction For Molecular Electronic Interest, Wan M. Khairul, Mohd Shahrul Shahmi Md Shariff, Rafizah Rahamathullah, Adibah Izzati Daud, Mustaffa Shamsuddin, Siti Kamilah Che Soh

Makara Journal of Technology

The synthesis and utilization of C-C bonds formation are concerned about the key steps for the building of several conducting molecular electronics involving many asymmetric catalysts approached, which is an essential task that most researchers would ignore in preparing these materials to enhance the production yield of cross-coupling materials. Despite the enormous progress, there still remains a great demand for economic and practicable cross-coupling processes involving ultra-low catalyst loadings with high turnover numbers due to the employment of conventional metal catalyst. Thus, there has been an excessive interest to cultivate non-phosphine palladium catalysts for excellent achievement of activity, stability, and …

Enhancements In Mass Transfer For Carbon Capture Solvents Part I: Homogeneous Catalyst, Leland R. Widger, Moushumi Sarma, Jonathan J. Bryant, David S. Mannel, Jesse G. Thompson, Cameron A. Lippert, Kunlei Liu

Center for Applied Energy Research Faculty and Staff Publications

The novel small molecule carbonic anhydrase (CA) mimic [Co^III(Salphen-COO⁻)Cl]HNEt₃ (1), was synthesized as an additive for increasing CO₂ absorption rates in amine-based post-combustion carbon capture processes (CCS), and its efficacy was verified. 1 was designed for use in a kinetically slow but thermally stable blended solvent, containing the primary amines 1-amino-2-propanol (A2P) and 2-amino-2-methyl-1-propanol (AMP). Together, the A2P/AMP solvent and 1 reduce the overall energy penalty associated with CO₂ capture from coal-derived flue gas, relative to the baseline solvent MEA. 1 is also effective at increasing absorption kinetics of kinetically fast solvents, such …

Excellent Performance Of Fe78si9b13 Metallic Glass For Activating Peroxymonosulfate In Degradation Of Naphthol Green B, Xue-Fen Li, Shun-Xing Liang, Xiao-Wang Xi, Zhe Jia, Shi-Kun Xie, He-Chun Lin, Jun-Ping Hu, Laichang Zhang

Research outputs 2014 to 2021

The functional application of metallic glasses in the catalytic field has widely attracted research attention due to its unique atomic structure compared to crystalline materials. It has been reported that metallic glasses can effectively activate H₂O₂ and persulfate, yet the activation of peroxymonosulfate by metallic glasses is not studied well. In this work, the metallic glass with atomic composition of Fe₇₈Si₉B₁₃ was applied for investigating the peroxymonosulfate (PMS) activation on degradation of naphthol green B (NGB) dye. The change of surface morphology indicated the important role of oxide films during the dye …

Scalable Production And Applications Of Metal Oxide Nanowires., Tu Quang Nguyen

Electronic Theses and Dissertations

Metal oxide nanowires are materials of interest in number of applications such as lithium ion batteries, solar cells, catalyst support, and gas sensing due to their unique charge transport properties and short diffusion length scales. To incorporate nanowires for any applications, one would need hundreds of grams to kilograms of these nanowires. However, state-of-the-art methods for producing metal oxide nanowires are limited to producing only milligrams to a gram in a batch. Hence, there is a need to develop scalable and cost effective processes and reactors to address this challenge. Direct gas phase oxidation of zinc metal powders using a …

Recycling Mf Solid Waste Into Mesoporous Nitrogen-Doped Carbon With Iron Carbide Complex In Graphitic Layers As An Efficient Catalyst For Oxygen Reduction Reaction, Can-Yun Zhao, Lin Huang, Yong You, Ying-Fang Yao, Xiao-Gang Su, Hong Wan, Jian-Guo Liu, Cong-Ping Wu

Journal of Electrochemistry

Nitrogen-doped carbon materials with iron ions are known as catalytic growth agents for the oxygen reduction reaction (ORR) in fuel cells, but the design and synthesis of high-performance and low-cost catalysts still remain a significant challenge. Herein, we present a cost-effective approach to dispose of MF solid waste as the precursor for the synthesis of MCFes catalyst with the favorable structure features such as the high specific surface area, abundant active sites and suitable pore structure. The results showed that the MCFe-10/10/2 had specific surface area as high as 780.7 m²•g^-1 and high efficient catalytic activity comparable …

Pathways To Ultra-Low Platinum Group Metal Catalyst Loading In Proton Exchange Membrane Electrolyzers, Julie N. Renner

Faculty Scholarship

Hydrogen is one of the world's most important chemicals, with global production of about 50 billion kg/year. Currently, hydrogen is mainly produced from fossil fuels such as natural gas and coal, producing CO2. Water electrolysis is a promising technology for fossil-free, CO2-free hydrogen production. Proton exchange membrane (PEM)-based water electrolysis also eliminates the need for caustic electrolyte, and has been proven at megawatt scale. However, a major cost driver is the electrode, specifically the cost of electrocatalysts used to improve the reaction efficiency, which are applied at high loadings (>3 mg/cm2 total platinum group metal (PGM) content). Core-shell catalysts …

Mixed Metal Oxide Catalysts Supported On H-Beta For Hydrogenolysis Of Glycerol Into 1,3-Propanediol, Amit Kant

Masters Theses

"Bioglycerol is the by-product which is produced largely from the microbial fermentation, hydrogenolysis of glucose in the mixture of polyols, fatty ester, soap manufacturing process and fatty acid production. Hydrogenolysis of glycerol is one of the most promising ways to convert glycerol and many work has been done towards 1,3-propanediol, 1,2-propanediol and 1-propanol using various metals and mixed-metal oxides such as W, Ru, Rh, Pt, Pd, Cu, Ni and different zeolites have been extensively used as the active components.

It has been well documented that the presence of Bronsted acid sites leads to the formation of acrolein, while Lewis acid …

Iron Phosphide Nanostructures As An Efficient Bifunctional Catalysts For Water Splitting, Nikitaa Ashokan

Masters Theses

"The first part of this thesis work focuses on developing a bifunctional catalyst for electrochemical water splitting encompassing both oxygen and hydrogen evolution. A highly efficient catalyst is necessary to improve kinetics of the sluggish four electron process for oxygen evolution reaction (OER) and two-electron process for hydrogen evolution reaction (HER). Recently, transition metal phosphides have gained increasing interest in this field because of their good electrical conductivity properties as well as better catalytic activity. Many transition-metal phosphides are being considered for this application and iron phosphide (FeP) has proved to be a good HER catalyst. In this work, we …

Development Of Highly Active And Stable Hybrid Cathode Catalyst For Pemfcs, Won Suk Jung

Theses and Dissertations

Polymer electrolyte membrane fuel cells (PEMFCs) are attractive power sources of the future for a variety of applications including portable electronics, stationary power, and automobile application. However, sluggish cathode kinetics, high Pt cost, and durability issues inhibit the commercialization of PEMFCs. To overcome these drawbacks, research has been focused on alloying Pt with transition metals since alloy catalysts show significantly improved catalytic properties like high activity, selectivity, and durability. However, Pt-alloy catalysts synthesized using the conventional impregnation method exhibit uneven particle size and poor particle distribution resulting in poor performance and/or durability in PEMFCs. In this dissertation, a novel catalyst …

Transition Metal Carbide (Tmc) Novel Materials For Novel Catalytic Applications, Svetlana Lagoykina

Open Access Theses & Dissertations

Transition metal carbides (TMC) constitute a diverse class of materials and traditionally have many technological applications. TMC became a subject of extensive research since 1973, when their platinum -like properties were discovered. They demonstrated high catalytical activity and selectivity in a variety of chemical reaction and have potential for some novel catalytic application.

This research is an effort to design new high effective, selective and stable bimetal or alkali promoted TMC catalyst. After extensive theoretical research a wide range of TMC, including bimetal and alkali promoted carbides, were synthesized by different methods. All solids were characterized by XRD and microscopy. …

Gas-Phase, Catalytic Hydrodeoxygenation Of Propanoic Acid Over Supported Group Viii Noble Metals, Yuliana K. Lugo José

Theses and Dissertations

Recent advances for the deoxygenation of biomass, have demonstrated that hydrodeoxygenation (HDO) is one of the most promising route for the upgrading pyrolysis bio-oils. Catalytic hydrodeoxygenation of pyrolysis bio-oil have shown to be an efficient and economical process, since the raw materials consist mainly of waste. Propanoic Acid (PAc) is considered as one of the main constituents of pyrolysis bio-oils. However, these carboxylic acids are extremely corrosive and difficult to deoxygenate. Therefore, much effort have been given to the development of novel catalytic techniques, to improve the activity, stability and selectivity for the HDO of carboxylic acids.

This dissertation explores …

Synthesis And Characterization Of Microporous And Mesoporous Catalysts For Shale Gas Upgrading, Danesh Contractor, Ravi Joshi, Rajamani Gounder

The Summer Undergraduate Research Fellowship (SURF) Symposium

The petroleum industry is gradually shifting from using naphtha to ethane as its feedstock and new ethane steam crackers are being built. Using ethane as a feedstock produces more ethene and less co-products such as propene, aromatics and C4 alkenes. Thus, the shift in feedstock will reduce the availability of these co-products. Developing methods for the interconversion of alkenes, and specifically using ethene as a reactant, can solve this problem.

This project focuses on synthesis and characterization of zeolites with the BEA framework topology, and their nickel exchanged versions as potential ethene dimerization catalysts. In future work, these materials will …

Synthesis And Reactivity Of Hy Zeolite-Supported Rhodium Complexes, Artem D. Vityuk

Theses and Dissertations

The growing interest in the design of heterogeneous analogs of highly active and selective homogeneous catalysts prompted researchers to invest significant efforts in understanding of synthetic pathways, structure, and reactivity of supported single-site metal complexes. Synthesis of catalytically active organometallic species on solid supports with properties resembling those of their homogeneous counterparts could offer the opportunities to perform efficiently the solution organic reactions by utilizing flow instead of batch reactors. In this regard, rhodium carbonyl complexes and their derivatives are viewed as very attractive candidates for heterogenization due to their extensive application as catalysts for variety of industrially important reactions. …

Green Diesel Production Via Catalytic Hydrogenation/Decarboxylation Of Triglycerides And Fatty Acids Of Vegetable Oil And Brown Grease, Elvan Sari

Wayne State University Dissertations

Increase in the petroleum prices, projected increases in the world’s energy demand and environmental awareness have shifted the research interest to the alternative fuel technologies. In particular, green diesel, vegetable oil/animal fat/waste oil and grease derived hydrocarbons in diesel boiling range, has become an attractive alternative to biodiesel— a mixture of fatty acid methyl esters, particularly due to its superior fuel properties that are similar to petroleum diesel. Hence, green diesel can be used as a drop-in fuel in the current diesel engines. The current technology for production of green diesel– hydrodeoxygenation of triglycerides and fatty acids over conventional hydrotreating …

Solution Combustion Synthesis Of Cobalt Oxide For Use As A Catalyst Precursor In The Hydrolysis Of Sodium Borohydride, Teandra Leigh Pfeil

Open Access Theses

Solution combustion synthesized (SCS) cobalt oxide (Co₃O₄) powder has been studied as a catalyst precursor for the hydrolysis of sodium borohydride (NaBH₄). Synthesis is completed in less than two minutes and results indicate SCS is capable of reproducibly synthesizing 98.5-99.5% pure Co₃O₄ nano-foam materials. SCS materials demonstrate an as-synthesized specific surface area of 24 m²/g, a crystallite size of 15.5 nm, and fine surface structures on the order of 4 nm. Despite having similar initial surface areas and sample purities, SCS-Co₃O₄ outperforms commercially available Co_{3 …}

Rational Design Of Perovskite Based Anode Materials For Solid Oxide Fuel Cells: A Computational Approach, Suwit Suthirakun

Theses and Dissertations

A key challenge in the development of solid oxide fuel cell (SOFC) technology is related to finding a suitable replacement for Ni-based cermet anodes. Although conventional Ni-based electrodes exhibit excellent catalytic activity and current collection, they suffer from several limitations such as instability upon redox cycling, nickel sintering, and sulfur and carbon poisoning when exposed to practical hydrocarbon fuels. Therefore, alternative anode materials need to be developed for SOFCs. Among the novel anode electrodes, perovskite based materials are of great interest because they have been shown to satisfy most intrinsic SOFC anode requirements such as high thermodynamic stability in anodic …

The Rational Synthesis Of Supported Noble Single Or Bimetallic Catalysts By Electrostatic Adsorption, Hyeran Cho

Theses and Dissertations

Many catalysts are today prepared by impregnation (also called incipient wetness or dry impregnation) in which nominal amounts of metals are placed into the amount of solution just necessary to fill the pore volume of the support material. While dry impregnation (DI) is simple and the amounts of metals easily controlled, no attention is paid to metal-support or metal-metal interaction. When DI-deposited metal precursors are reduced, the particles tend to be large in size and there is often ppor contact between two metals in a bimetallic system. In this work we demonstrate the application of "strong electrostatic adsorption" (SEA) for …

Nanoscale Metal Oxide And Supported Metal Catalysts For Li-Air Battery, Kan Huang

Doctoral Dissertations

"The dissertation work focuses on research and development of durable nanoscale catalysts and supports for rechargeable Li-air batteries that use aqueous catholytes. Transition metal oxides, TiO₂ and Nb₂O₅ in particular, were prepared from a sol-gel process in the form of nanocoatings (5~50 nm) on carbon nanotubes (CNTs) and studied as catalyst supports. Carbon doping in the oxides and post annealing significantly increased their electronic conductivity. Pt catalyst on the support with TiO₂ (Pt/c-TiO₂/CNTs) showed a much better oxygen reduction reaction (ORR) activity than a commercial Pt on carbon black (Pt/C). Negligible loss ( …

Preparation And Electrocatalytic Activity Of The Pt/Wc/Tio2 Composites, Chun-An Ma, Bin Yu, Mei-Qin Shi, Xiao-Ling Lang

Journal of Electrochemistry

TiO₂ was used as the support for preparation of Pt/WC/TiO₂ composite catalyst. The composites were characterized by XRD, SEM and TEM methods. The electrocatalytical activity of Pt/WC/TiO₂ composite for oxidation of methanol was investigated by cyclic voltammetry. Pt/WC/TiO₂ exhibited higher activity compared with that of Pt/TiO₂ and Pt/WC composite catalysts. Based on this we discussed the effects of crystal phases of TiO₂ on the electrocatalytical activity of Pt/WC/TiO₂ composite catalyst.

Comparison Of Catalytic Performance On Different Materials Supported Pd Catalysts For Formic Acid Oxidation, Su-Dong Yang, Yan-Yu Liang, Zhu-Liang Wen, Qi-Jun Song, Xiao-Gang Zhang

Journal of Electrochemistry

Graphite oxide (GO) was prepared from by Hummers method. Then the graphene nanosheets supporting Pd catalysts were prepared by a single-step chemical reduction method. The electrocatalytic performance for formic acid oxidation of the prepared Pd/graphene composite was studied as an electrode material in comparison with the composite catalysts based on the other carbons (MWCNTs, SWCNTs, and Vulcan XC-72 carbon black). X-ray diffraction (XRD) and transmission electron microscopy (TEM) measurements indicated that the Pd nanoparticles were well dispersed on the surface of the graphene nanosheets with a small particle size. The electrocatalytic oxidation of formic acid was studied by electrochemically active …